Solve the ideal gas equation for moles
PV = nRT​

Answers

Answer 1
We must isolate the n variable:
PV=nRT
n=PV/RT
The equation for moles is n=PV/RT

Related Questions

A student mixes 100. mL of 0.25 M HCl(aq) with 200. mL of 0.50 M HClO4(aq) and then dilutes the mixture with distilled water to a total volume of 500. mL. The [H3O+] in the final solution is closest to
(A) 0.0025 M
(B) 0.12 M
(C) 0.25 M
(D) 0.75 M

Answers

Answer:

The answer is B: 0.0025 M

According to molar concentration and dilution concept, the  [H₃O+] in the final solution is closest to 0.05 M.

What is molar concentration?

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions concentrated and diluted it is calculated as, M₁V₁=M₂V₂ substitution gives M₂=0.25×100/500=0.05

Learn more about molar concentration,here:

https://brainly.com/question/15532279

#SPJ2

Please help me
Define acid.
Mention four products of destructive distillation of coal.
In a tabular, highlight two differences between diamond and graphite.
List four types of salt.
Outline two physical properties of a base.

Answers

1. An acid is a substance that produces hydrogen ions, H +(aq), when dissolved in water


4. acidic salt, basic salt, neutral salt, and double salt

I only know the two questions not the rest sorry

The table shows the number of charged particles in an ion.


Charged Particles
Charge on Particle Number of Particles
Positive 3
Negative 2

A negatively charged substance is brought near the ion. What will most likely happen?
The negatively charged ion will repel the substance.
The negatively charged ion will attract the substance.
The positively charged ion will repel the substance.
The positively charged ion will attract the substance.

Answers

The answer is D. It’s positively charged because there are more positive than negative ions and remember opposites always attract because it wants to be balanced, attracting the negative ion.

Answer: three

Explanation:

How much heat is released when 60.0 g of ethanol cools from 70 °C to 43 °C?
a) 1,600 J
b) 1500 J
c) 810 J
d) 750 J

Answers

The heat released is 1600 joules, so the correct option is the first one.

How much heat will be released?

To calculate the heat released when 60.0 g of ethanol cools from 70 °C to 43 °C, we can use the formula for heat transfer:

q = m * C * ΔT

where:

q = heat transfer (in joules)m = mass of the substance (in grams)C = specific heat capacity of the substance (in J/(g°C))ΔT = change in temperature (in °C)

Given:

Mass of ethanol (m) = 60.0 g

Specific heat capacity of ethanol (C) = 1.0 J/(g°C) (at constant pressure)

Change in temperature (ΔT) = Final temperature - Initial temperature = 43 °C - 70 °C = -27 °C

Note that the negative sign in ΔT indicates that heat is being released (i.e., the substance is cooling).

Plugging in the given values into the formula:

q = 60.0 g *1.0 J/(g°C) * (-27 °C)

q ≈ -1600 J

The negative sign is for notation, here we can see that the amount of heat is 1600 joules, so the correct option is the first one.

Learn more about heat at.

https://brainly.com/question/22741007

#SPJ1

Which element has an electron configuration of [Ne]3s²3p³?


neon

phosphorus

arsenic

nitrogen

Answers

The element with an electron configuration of [Ne]3s²3p³ is phosphorus (P).

At 25 ∘C
, the equilibrium partial pressures for the reaction

A(g)+2B(g)↽−−⇀C(g)+D(g)

were found to be A=5.63
atm, B=5.00
atm, C=5.47
atm, and D=5.63
atm.

What is the standard change in Gibbs free energy of this reaction at 25 ∘C
?

Answers

The standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.

What is standard change?

To find the standard change in Gibbs free energy of the reaction, we need to use the following equation:

ΔG° = -RT ln(K)

where ΔG° is the standard change in Gibbs free energy, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (25 °C = 298 K), and K is the equilibrium constant.

To find K, we need to use the equilibrium partial pressures:

K = (PC × PD) / (PA × PB²)

where PA, PB, PC, and PD are the equilibrium partial pressures of A, B, C, and D, respectively.

Substituting the values, we get:

K = (5.47 atm × 5.63 atm) / (5.63 atm × (5.00 atm)²)

K = 0.6176

Now we can calculate the standard change in Gibbs free energy:

ΔG° = -RT ln(K)

ΔG° = -(8.314 J/mol·K) × (298 K) × ln(0.6176)

ΔG° = -1,690 J/mol or -1.69 kJ/mol

Therefore, the standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.

What is free energy?

Free energy, also known as Gibbs free energy, is a thermodynamic quantity that represents the amount of energy in a system that is available to do work at a constant temperature and pressure. It is denoted by the symbol G and is expressed in units of joules (J) or calories (cal).

In simple terms, free energy is the energy that can be used to do work. It is defined by the equation:

ΔG = ΔH - TΔS

where ΔH is the change in enthalpy (heat content) of the system, ΔS is the change in entropy (disorder) of the system, and T is the absolute temperature in Kelvin.

If ΔG is negative, the reaction is spontaneous and can proceed without the input of external energy. If ΔG is positive, the reaction is non-spontaneous and requires energy input to proceed. If ΔG is zero, the system is at equilibrium.

To know more about free energy, visit:

https://brainly.com/question/14150518

#SPJ1

2. A student prepared a 0.500 M solution of an unknown acid, and measured the pH as 3.56 at 25°C. (a) What is the acid dissociation constant of this unknown acid? (b) What percentage of acid is ionised in this solution​

Answers

To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution.

(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:

[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M

What is the acid dissociation constant of this unknown acid?

The acid dissociation constant (Ka) can then be calculated using the equation:

Ka = [H+][A-]/[HA]

where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:

α = [A-]/[HA]

Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:

[A-] ≈ 0.500α

[HA] ≈ 0.500 - 0.500α

Substituting these expressions into the equation for Ka, we get:

Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α

≈ ([H+]/Ka)(0.500α)/(1-α)

Solving for Ka, we get:

Ka ≈ H+/0.500α

Substituting the values we have calculated, we get:

Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)

Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).

(b) To find the percentage of acid that is ionized in the solution, we can use the equation:

α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))

where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:

α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008

Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.

Learn more about dissociation constant from

https://brainly.com/question/30930515

#SPJ1

To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution.

(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:

[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M

What is the acid dissociation constant of this unknown acid?

The acid dissociation constant (Ka) can then be calculated using the equation:

Ka = [H+][A-]/[HA]

where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:

α = [A-]/[HA]

Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:

[A-] ≈ 0.500α

[HA] ≈ 0.500 - 0.500α

Substituting these expressions into the equation for Ka, we get:

Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α

≈ ([H+]/Ka)(0.500α)/(1-α)

Solving for Ka, we get:

Ka ≈ H+/0.500α

Substituting the values we have calculated, we get:

Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)

Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).

(b) To find the percentage of acid that is ionized in the solution, we can use the equation:

α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))

where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:

α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008

Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.

Learn more about dissociation constant from

brainly.com/question/30930515

#SPJ1

What two salts have the same solubility at approximately 23 C?

Answers

Answer silver chloride (AgCl) and lead chloride (PbCl2).

Explanation:

Two salts that have the same solubility at approximately 23°C are silver chloride (AgCl) and lead chloride (PbCl2).

Both AgCl and PbCl2 have very low solubilities in water at room temperature, and their solubilities are similar at around 23°C. They are both sparingly soluble salts, meaning they dissolve only to a limited extent in water to form a saturated solution.

It's important to note that solubility can vary depending on the specific conditions, such as temperature, pressure, and presence of other substances. The solubility of salts can also be affected by factors such as pH and the presence of other ions in solution. Therefore, it's always best to consult reliable sources, such as reference tables or experimental data, for accurate solubility information at a given temperature.

Liquid octane CH3CH26CH3 will react with gaseous oxygen O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. Suppose 6.9 g of octane is mixed with 42.2 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to 2 significant digits.

Answers

The maximum mass of carbon dioxide that could be produced from 6.9 g of octane and 42.2 g of oxygen is 21.3 g, rounded to 2 significant digits.

What is Octane?

Octane is a hydrocarbon with the chemical formula [tex]C_{8} H_{18}[/tex] It is an organic compound belonging to the alkane group, which means it consists of only carbon (C) and hydrogen (H) atoms bonded together by single covalent bonds. Octane is a colorless liquid with a molecular weight of approximately 114 g/mol and is commonly used as a component in gasoline or fuel for internal combustion engines.

From the balanced equation, we know that 1 mole of octane reacts with 12.5 moles of oxygen to produce 8 moles of carbon dioxide. Therefore, 0.0605 mol of octane would require 0.0605 mol x 12.5 = 0.75625 mol of oxygen to fully react.

Since we have only 1.32 mol of oxygen, which is in excess compared to the 0.75625 mol required by octane, oxygen is the excess reactant, and octane is the limiting reactant.

Now, we can use the stoichiometry of octane to carbon dioxide to calculate the maximum mass of carbon dioxide produced:

From the balanced equation, we know that 1 mole of octane produces 8 moles of carbon dioxide.

Molar mass of carbon dioxide (CO2) = 44.01 g/mol

Maximum moles of carbon dioxide produced from octane = 0.0605 mol x 8 = 0.484 mol

Maximum mass of carbon dioxide produced from octane = 0.484 mol x 44.01 g/mol = 21.3 g

Remember to round the final answer to 2 significant digits as requested.

Learn more about Octane from the given link

https://brainly.com/question/28469125

#SPJ1

Which of the following represents beta decay
OA. Tc-TC+y
O B.
B. 14Gd→ 144Sm+ He
O C. 160Eu+e→ 169 Sm
62
O D.
D.
63
164Gd→ ¹6 Tb + e
160
65

Answers

The correct answer that represents beta decay is

D. 164Gd → 164Tb + e,

What happens in beta decay

In beta decay, a neutron in the nucleus is converted into a proton, and an electron (or beta particle) and an antineutrino are emitted from the nucleus.

In this case, a neutron in the 164Gd nucleus is converted into a proton, and an electron is emitted from the nucleus, resulting in the production of 164Tb.

Option A is not a valid representation of any known type of radioactive decay.

Option B represents alpha decay, in which an alpha particle is emitted from the nucleus.

Option C represents electron capture, in which an electron is captured by the nucleus.

Learn more about beta decay at

https://brainly.com/question/27770519

#SPJ1

Phosphorus (P4) and oxygen react to produce diphosphorus pentoxide. How many grams of diphosphorus pentoxide are produced from the reaction of 38.76 grams of oxygen with excess phosphorus? Round your answer to the hundredths of a gram. Do not include units. Use the atomic masses in this PERIODIC TABLE. DO NOT ROUND THESE MASSES IN YOUR CALCULATION.

Answers

The mass of diphosphorus pentoxide produced is: 549.47 g

What is mass?

Mass is a measure of the amount of matter in an object. It is typically measured in units of grams (g) or kilograms (kg). Mass is a scalar quantity and is different from weight, which is the force exerted on an object due to gravity and depends on both the mass of the object and the acceleration due to gravity.

The balanced chemical equation for the reaction between phosphorus and oxygen to produce diphosphorus pentoxide is:

[tex]4P[/tex] + [tex]5O_{2}[/tex] → [tex]2P_{4}O_{10}[/tex]

To solve the problem, we need to first calculate the amount of phosphorus required to react with 38.76 grams of oxygen. Since phosphorus is in excess, the amount of diphosphorus pentoxide produced will be limited by the amount of oxygen.

The molar mass of oxygen is 15.999 g/mol. Therefore, the number of moles of oxygen in 38.76 grams is:

38.76 g / 15.999 g/mol = 2.422 mol

According to the balanced equation, 5 moles of oxygen react with 4 moles of phosphorus to produce 2 moles of diphosphorus pentoxide. Therefore, the number of moles of phosphorus required is:

4/5 × 2.422 mol = 1.9376 mol

The molar mass of diphosphorus pentoxide is 283.886 g/mol. Therefore, the mass of diphosphorus pentoxide produced is:

1.9376 mol × 283.886 g/mol = 549.47 g

Rounding to the hundredths of a gram, the answer is:

549.47 g → 549.47

To know more about mass, visit:

https://brainly.com/question/13975439

#SPJ1

Can someone help me with this I am too lazy to work it out

Answers

Answer:

acid +metal ----->salt +hydrogen

Is V(SO4)2 ionic or covalent?

Answers

Since vanadium is a transition metal and sulfate is an anion, we can insist that V(SO4)2

is an ionic compound.

Answer:

V(SO4)2 is ionic

Explanation:

In this compound, Vanadium (V) is a transition metal with an oxidation state of +5, and sulfate (SO4) is a polyatomic ion with a charge of -2. The compound is formed by the transfer of two electrons from each sulfur atom to the vanadium atom. This results in the formation of two V3+ cations and one SO42- anion, which combine to form V(SO4)2.

Ionic compounds are formed by the transfer of electrons between atoms or ions, resulting in the formation of positively charged cations and negatively charged anions. These oppositely charged ions are held together by strong electrostatic forces, forming a crystalline lattice structure.

In conclusion, V(SO4)2 is an ionic compound formed by the transfer of electrons from the sulfate ion to the vanadium ion.

True/False: Paraffin wax (d = 0.910 g/cm3) would float in ethanol (d = 789 kg/L)

Answers

The claim that paraffin wax would float in ethanol (d = 789 kg/L) is accurate.

In ethanol, does paraffin wax float?

A 40–50% aqueous solution would have a density that could be adjusted to be just below that of paraffin wax, while regular alcohol (ethanol) has a density of roughly 0.8. The wax would then begin to sink. Warming causes the wax's density to significantly decrease (more than ethanol does), causing it to float.

Does ethanol allow you to float?

Even with your lungs completely expanded, you cannot float in 80-proof (or 40%) alcohol since your body weighs more than the booze and will sink if you stop swimming.

To know more about paraffin wax visit:-

https://brainly.com/question/16121848

#SPJ1

Which statements best describe plasmas? Check all that apply.
• Plasmas have a definite volume.
• Plasmas can change shape.
• Plasmas contain ionized particles
• Plasmas are abundant on Earth.
• Plasmas are good insulators

Answers

The statement "Plasmas can change shape" and "Plasmas contain ionized particles" best describe plasmas.

What is plasmas?

Plasma is a state of matter that is similar to gas but differs in that it contains ionized particles, which are atoms or molecules that have lost or gained one or more electrons. This results in a mixture of positively charged ions and negatively charged electrons, making plasma electrically conductive.

Plasma can be found in many natural phenomena such as lightning, stars, and the aurora borealis, and it is also used in various technological applications such as plasma TVs, fusion reactors, and fluorescent lights. Because of its unique properties, plasma has many interesting and useful applications in fields such as physics, chemistry, and engineering.

Learn about plasmas here https://brainly.com/question/950535

#SPJ1

Draw both enantiomers of the following compound​

Answers

Enantiomers rotate the plane of polarized light in opposite directions, and this property is used to distinguish between them in a process called optical rotation.

What are the enantiomers of a compound?

Enantiomers are pairs of molecules that are non-superimposable mirror images of each other.

They are isomers, meaning they have the same molecular formula and connectivity but differ in their three-dimensional arrangement of atoms in space.

Enantiomers exhibit identical physical and chemical properties, except for their interaction with plane-polarized light (a type of light that oscillates in a single plane).

Learm= more about enantiomers at: https://brainly.com/question/30216513

#SPJ1

A reaction has a standard free‑energy change of −17.40 kJ mol−1(−4.159 kcal mol−1).
Calculate the equilibrium constant for the reaction at 25 °C.

eq=

Answers

At 25 oC, the reaction's equilibrium constant is Cu(s) + 2Ag+ (aq) Cu+2 (aq) + 2Ag. (s). Eocell is equal to 0.47 V, R is 8.134 JK-1, and F is 96500 C at 25oC.

What is the antilog of four?

Antilogarithm is the value that a certain logarithm represents. For instance, x corresponds to the antilogarithm for y if log x = y. An antilogarithm of the stated number is an integer whose logarithm equals the specified number. Since 10,000 (104) has a logarithm of 4, 10,000 has an antilogarithm of 4.

Antilog of 7.06 with K equal to 1164

You must calculate K using the relationship Go = -RTlnK.  In this example, 8.315 j K-1mol-1 should be used as R, therefore lnK = Go/ -RT = -17.5 x 103 jmole-1 / (-8.315 j K-1mol-1 x 298 °K) = 7.06

An antilog on a calculator is what?

By elevating a logarithm above its base, one can find an antilog, which is the opposite of a logarithm. For instance, 10y = 5 is the antilog with y = log10(5). If y = ln(x), where y is time, and x is the value that needs to grow, then the natural logarithm can be used to determine how long it will take to reach a particular level of growth.

To know more about antilog visit:

brainly.com/question/30128293

#SPJ1

40 grams of KCl are dissolved in 100 mL of water at 45C.
How many additional grams of
KCI are needed to make the solution saturated at 80 C?

Answers

40 grams of KCl are dissolved in 100 mL of water at 45C. 5g of  additional grams of KCI are needed to make the solution saturated at 80 C as the solubility of KCl is 45g/ml

A uniform combination of a number of solutes within a solvent is referred to as a solution. One frequent illustration of a Solution is adding sugar cubes into your cup of tea and coffee. Solubility is the quality that makes sugar molecules more soluble.

In water, potassium chloride (KCl) dissolves. Its water solubility, like that of all other solutes, depends on temperature. The solubility of a salt increases as the solvent's temperature rises. This is fairly simple to experience with sugar. 40 grams of KCl are dissolved in 100 mL of water at 45C. 5g of  additional grams of KCI are needed to make the solution saturated at 80 C as the solubility of KCl is 45g/ml.

To know more about solubility, here:

https://brainly.com/question/29661360

#SPJ1

The diagram below illustrates that the mass of an atom of element X is equivalent to the total mass of 7 hydrogen atoms. X H H H H H H X H 14​

Answers

The total mass of protons and neutrons makes up an element's atomic mass. Lithium is the element X; it has a mass of 6.941 u.

What is element?

When an atom has the same number of protons in its atomic nucleus, it is said to be an element. The number of protons in the nucleus of each element's atoms, or atomic number, serves as the element's sole means of identification.

Seven hydrogen atoms will weigh 7.056 g as each hydrogen atom has an atomic mass of 1.008. The periodic chart shows that an atomic mass of 7.056 g is the one that is closest to that of a lithium atom (6.941 u).

Seven hydrogen atoms have a mass comparable to one lithium atom in the periodic table, based on their mass. With an atomic mass of 6.941 g/mol, the lithium atom bears the atomic number 3.

Lithium is  the name of element X.

To know more about elements, visit:

https://brainly.com/question/14347616

#SPJ9

What is the Molality of a solution in which
25 g of sodium chloride is dissolved in 2.0
kg of water?

Answers

The molality of a solution is determined by the amount of solute (in moles) and the mass of the solvent (in kilograms). To convert the mass of NaCl to moles, the molar mass of NaCl is 58.44 g/mol. The number of moles of NaCl is 25 g / 58.44 g/mol = 0.427 mol. The molality of the solution is 0.213 mol/kg.

What is molality?

The amount of a solute dissolved in a solvent is indicated by the chemical term "molality," which is commonly defined in terms of moles of solute per kilogramme of solvent. Because it takes into account variations in the volume of the solution owing to temperature and pressure, it differs from molarity, which quantifies the quantity of a solute in moles per litre of solution.

To calculate the molality of a solution, we need to know the amount of solute (in moles) and the mass of the solvent (in kilograms).

In this case, we are given:

Mass of solute (NaCl) = 25 g

Mass of solvent (water) = 2.0 kg

To calculate the amount of solute in moles, we need to convert the mass of NaCl to moles using its molar mass:

Molar mass of NaCl = 58.44 g/mol

Number of moles of NaCl = (25 g) / (58.44 g/mol) = 0.427 mol

Now we can calculate the molality of the solution:

Molality = (number of moles of solute) / (mass of solvent in kg)

Molality = (0.427 mol) / (2.0 kg) = 0.213 mol/kg

Therefore, the molality of the solution is 0.213 mol/kg.

To know more about molality, visit

brainly.com/question/26921570

#SPJ1

What happens when a solid is dissolved into a liquid?
.

Answers

The solid has broken down into pieces so small that its particles spread all throughout the new mixture

The satellite image above shows the San Francisco area along the West Coast. What feature is marked by "X"?

A. A bay
B. A fresh water lake
C. A mountain
D. A volcano

Answers

probably option A
A bag because it broad inlet of the sea where the land curves inwards

Please THANKS FOR WHO EVER WILL ANSWER THESE 14

Answers

The above is about the movement of lithospheric plates. See explanation and attached image for details.

What are the process of lithospheric plates movement?

The movement of lithospheric plates is driven by convection currents in the Earth's mantle, which are caused by heat generated from the Earth's core. These currents cause the lithospheric plates to move, and the motion can result in a variety of geological phenomena, including earthquakes, volcanic activity, and the formation of mountain ranges and oceanic trenches.

There are three main types of plate boundaries, and each one results in a different type of movement of lithospheric plates:

Divergent Boundaries: At divergent boundaries, lithospheric plates move away from each other. This movement is caused by the upwelling of hot material from the mantle, which pushes the plates apart. As the plates move away from each other, magma rises up to fill the gap between them, creating new crust. Divergent boundaries are where new oceanic crust is formed.

Convergent Boundaries: At convergent boundaries, lithospheric plates move towards each other. There are three types of convergent boundaries: oceanic-oceanic, oceanic-continental, and continental-continental. At oceanic-oceanic and oceanic-continental convergent boundaries, one plate is forced beneath the other, creating a subduction zone. This movement is caused by the sinking of a denser plate beneath a less dense plate. As the denser plate sinks, it melts and can trigger volcanic activity. At continental-continental convergent boundaries, the plates are too buoyant to subduct, so they instead buckle and push up, forming mountain ranges.

Transform Boundaries: At transform boundaries, lithospheric plates move past each other. This movement is caused by the lateral movement of the convection currents in the mantle. Transform boundaries can create large faults, which can lead to earthquakes.

Overall, the movement of lithospheric plates is a complex and dynamic process, driven by the movement of material within the Earth's mantle.

Learn about movement of lithospheric plates here brainly.com/question/2722711

#SPJ1

At what temperature do saturated solutions of potassium nitrate (KNO3) and sodium nitrate (NaNO3) contain the same weight of solute per 100 mL of water?

Answers

At 40°C is the temperature at which saturated solutions of potassium nitrate and sodium nitrate contain the same weight of solute per 100 mL of water contain the same weight of solute per 100 mL of water.

Temperature is a unit of warmth or coldness that can be defined in the context of any number of arbitrary scales. It indicates the direction that heat energy will naturally flow, i.e., through a hotter (body) to a colder (body) body.

Temperature is not the same as the energy in a thermodynamic system; for instance, an iceberg has a significantly larger total heat energy than a match, despite the fact that a match is burning at an extremely high temperature. At 40°C is the temperature at which saturated solutions of potassium nitrate and sodium nitrate contain the same weight of solute per 100 mL of water.

To know the temperature, here:

https://brainly.com/question/11464844

#SPJ1

Round to 2 significant
figures.
5,249

Answers

5,250. The number was rounded up from 5,249 because the last digit, 9, is greater than or equal to 5.

What is rounded up?

Rounding up is a mathematical operation that involves increasing a number to its nearest whole number. It is commonly used when dealing with money, measurements, or statistics. When rounding up, the number is increased to the next highest whole number. For example, if a number is 6.7, it would be rounded up to 7. Rounding up is often used when dealing with exact measurements or estimates to simplify the calculations. It can also be used to make the results of a calculation easier to understand. In the case of money, rounding up can be used to round a number to the nearest dollar. This prevents dealing with fractional amounts of money. Rounding up can also be utilized in statistical analysis, such as in the calculation of mean or median. This simplifies the data and prevents dealing with fractions or decimals.

To learn more about  rounded up

https://brainly.com/question/17396482

#SPJ9

The isotope Tl-208 undergoes β decay with a half-life of 3.1 min.

What is the decay constant for this process?

a.)
4.47 min⁻¹
b.)
2.15 min⁻¹
c.)
0.224 min⁻¹
d.)
0.031 min⁻¹

Answers

The decay constant for this process is

c.) 0.224 min⁻¹

How to find the decay constant

The decay constant (λ) is related to the half-life (t1/2) by the following equation:

λ = ln(2) / t1/2

where

ln(2) is the natural logarithm of 2, which is approximately 0.693.

Substituting the given half-life of 3.1 min into the equation, we get:

λ = ln(2) / (3.1 min) ≈ 0.223 min^(-1)

Therefore, the decay constant for the β decay of Tl-208 is approximately 0.223 min^(-1).

Learn more about decay constant at

https://brainly.com/question/12699719

#SPJ1

1-A tennis ball travelling at a speed of 46 m/s with a mass of 58 g. Calculate its kinetic energy Ek=0.5mv2

2-A plane at a speed of 255 m/s with a mass of 2.15 × 105 kg. calculate its kinetic energy

3-A hot air balloon with a kinetic energy of 76 550 J and a mass of 1890 kg. Calculate its velocity

Answers

The tennis ball has a kinetic energy of around 56.8 J. The aircraft has a kinetic energy of around 4.43 x 10⁹ J. The hot air balloon travels at a speed of around 9.0 m/s.

A 750 kilogramme automobile travelling at a speed of 50.0 km/h has how much kinetic energy?

How much effort must be put into slowing down a 750 kg automobile from 100 km/h to 50 km/h. We know that the of this automobile at 50.0 km/h is 72,300 Joules from the last example problem.

Ek = 0.5 x 0.058 kg x (46 m/s)²

Ek = 0.5 x 0.058 kg x 2116 m²/s²

Ek = 56.8468 J

Ek = 0.5mv²

Ek = 0.5 x 2.15 x 10⁵ kg x (255 m/s)²

Ek = 0.5 x 2.15 x 10⁵ kg x 65025 m²/s²

Ek = 4.433 x 10⁹ J

Ek = 0.5mv²

v = √(2Ek/m)

v = √(2 x 76550 J / 1890 kg)

v = √(81.011 J/kg)

v = 9.0 m/s (approx.)

To know more about energy visit:-

https://brainly.com/question/8630757

#SPJ1

What happens to the pH when a a small amount of acid is added to a buffered solution?

A.the pH goes up to 14.

B.The pH goes down to 1.

C.The pH stays about the same.

D.The pH goes to 7.

Answers

C. The pH stays about the same.

A buffered solution resists changes in pH upon addition of small amounts of acid or base. The buffer system in the solution will react with the added acid, keeping the pH relatively constant

Answer:

C.The pH stays about the same.

Explanation:

Buffer reactions maintain stable pH of solutions.

Consider the reaction described by the chemical equation shown.

C2H4(g)+H2O(l)⟶C2H5OH(l)Δ∘rxn=−44.2 kJ

Use the data from the table of thermodynamic properties to calculate the value of Δ∘rxn
at 25.0 ∘C.


Δ∘rxn= ? J⋅K−1

Calculate Δ∘rxn.

Δ∘rxn= ? kJ


In which direction is the reaction, as written, spontaneous at 25 ∘C
and standard pressure?
reverse
both
neither
forward

Answers

The direction of the reaction, as written, spontaneous at 25 ∘C and standard pressure is reverse.

What is the direction of the reaction?

To calculate the value of Δ∘rxn at 25.0 ∘C, we can use the equation:

Δ∘rxn(T2) = Δ∘rxn(T1) + ΔH∘(products) - ΔH∘(reactants)

where;

T2 is the desired temperature (25.0 ∘C), T1 is the standard temperature (usually 25 ∘C), ΔH∘(products) is the enthalpy change of formation of the products, and ΔH∘(reactants) is the enthalpy change of formation of the reactants.

Using the data from the table of thermodynamic properties, we can look up the enthalpy change of formation values for C2H4(g), H2O(l), and C2H5OH(l):

ΔH∘f(C2H4(g)) = 52.26 kJ/mol

ΔH∘f(H2O(l)) = -285.83 kJ/mol

ΔH∘f(C2H5OH(l)) = -277.69 kJ/mol

Substituting these values into the equation, we get:

Δ∘rxn(25.0 ∘C) = -44.2 kJ + (-277.69 kJ/mol) - (-52.26 kJ/mol)

Δ∘rxn(25.0 ∘C) = -44.2 kJ - (-277.69 kJ/mol) + 52.26 kJ/mol

Δ∘rxn(25.0 ∘C) = -44.2 kJ + 277.69 kJ/mol + 52.26 kJ/mol

Δ∘rxn(25.0 ∘C) = 233.23 kJ/mol

So the value of Δ∘rxn at 25.0 ∘C is 233.23 kJ/mol.

In which direction is the reaction, as written, spontaneous at 25 ∘C and standard pressure?

Since the value of Δ∘rxn at 25.0 ∘C is positive (233.23 kJ/mol), the reaction as written is not spontaneous at this temperature and standard pressure. The correct answer is "reverse."

Learn more about enthalpy change here: https://brainly.com/question/16387742

#SPJ1

2AI + 6HCI=2AlCl3 + 3H₂
3. Aluminum reacts with HCI to produce aluminum chloride (AICI3) and hydrogen gas (H₂).
Calculate the number of moles of HCI required to react with 0.62 moles of Al.

Answers

3.0 moles of [tex]Al[/tex] can fully react with hydrogen chloride to produce 4.5 moles of [tex]H_{2}[/tex]. Thus, 0.93 moles will be produced by 0.62 moles of [tex]Al[/tex].

STOICHIOMETRYBased on this inquiry, how does aluminum react with hydrogen chloride to produce aluminum chloride and hydrogen gas[tex]Al +6HCl= AlCl_{3} +3H_{2}[/tex]According to this equation, 3 moles of hydrogen gas are produced during the reaction of 2 moles of aluminum ([tex]Al[/tex]).As a result, 3 moles of aluminum will result in 3 3 2 = 4.5 moles of hydrogen gas.As a result, the entire reaction of 3.0 moles of [tex]Al[/tex]with hydrogen chloride can produce 4.5 moles of [tex]H_{2}[/tex].The proportion of reactants to products before, during, and after chemical processes is known as stoichiometry.

For more information on stoichiometry kindly visit to

https://brainly.com/question/19484482

#SPJ1

Other Questions
4You draw five cards from a standard deck of 52 cards. P(heart) =What type of probability is illustrated and why?5O A. theoretical; the result is based on the number of possible outcomesO B. theoretical; the result is found by repeating an experimentOC. experimental; the result is based on the number of possible outcomesO D. experimental; the result is found by repeating an experimentvered #3 Caspian Sea Drinks is considering buying the J-Mix 2000. It will allow them to make and sell more product. The machine cost $1.64 million and create incremental cash flows of $568,769.00 each year for the next five years. The cost of capital is 8.71%. What is the profitability index for the J-Mix 2000? 0 Submit Answer format: Number: Round to: 3 decimal places. Which two equations would be most appropriately solved by using the zero product property? Select each correct answer. Responses 3x26x=0 3 x squared minus 6 x equals 0 4x = 13 4, x, = 13 0.25x2+0.8x8=0 0.25 x squared plus 0.8 x minus 8 equals zero (x1)(x+9)=0 Please help with this math question! what is the circumference of a circle witya diameter of 25cm and 2.5cm Do this by 6th april 2022, try to do this in worddocument, 1st question (1 to 10) are True/False and also mentionhow to correct false statement, answer all the questions (1 to 4)in full fledge mann3. The learning and growth perspective on the balanced Scorecard mcludes measures monitoring product development, production, delivery, and after-sale service 6- Companies can use either a predetermin according to hipaa, when an insured individual leaves an employer and immediately begins working for a new company that offers group health insurance, the individual PLEASE HELP ILL MARK BRAINLIEST !!Consider the Chinese proverb "when the wind of change blows some build walls while other build windmills. "Which does the family in this poem do ? Explore your ideas in a written argument -MAGIC ISLAND - Please just explain it more to me 52 no one can win more than one prize? multiple choice 16,129,423 16,497,400 15,281,283 16,300,400 PatJohn has made a backup copy of his most important files onto a removable drive. What should PatJohn do next?Question 1 options:-Copy the backup to the cloud-Nothing, he is done-Store the backup in a secure location-Test the backup to make sure it works the teacher has a small class with only 7 students. the teacher grades their homework and reports scores of: 10, 7, 8, 12, 9, 11, and 13. what is the median? peloton launched an advertising campaign in december 2019. the campaign did not impact sales right away, but led to a significant increase in sales in the next quarter. this is called: josse is collecting signatures for a petition. He currently has 520signatures. He has 6 more weeks to collect the signatures he needs. He needs at least 1000 signatures before he can submit his petition explain pliss Please help I need to answer fast the fate of my graduation depends on it. mitch and kelly are in the business of flipping properties. they buy older, run down houses, remodel from top to bottom, and then sell them for a profit. their latest property has just sold, and escrow has opened. what is one thing they can do to comply with the homebuyer protection act? find the value of 31 over 16 20!!!!! POINTS!!!!!!! The bar graph shows the strengths of tornadoes that occurred in Alabama in 2011. What percent of the tornadoes were EF1s? for a math assignment, michelle rolls a set of three standard dice at the same time and notes the results of each trial. what is the total number of outcomes for each trial? chronic bronchial inflammatory disorder due to bronchial edema and constriction and increased mucus production. (True or False) Either can be used hereechanic. He ------ cars.