Some comets get brighter at certain times in their orbits.

True
False

Adding 6 M NaOH instead of conc. NH₄OH to the test solution will increase the pH of the solution, making it more basic.

This will cause the precipitation of both Fe(OH)₃ and Ni(OH)₂ as they are insoluble in basic solutions. Therefore, the separation of Fe from Ni ions will not be successful with the addition of 6 M NaOH.

To separate Fe and Ni ions, the solution is treated with conc. NH₄OH to form a precipitate of Fe(OH)₃, leaving Ni ions in solution. The addition of NaOH will negate this separation process and cause the precipitation of both Fe and Ni ions. Therefore, it is essential to use the specific reagents mentioned in the separation process to achieve successful separation of the Fe and Ni ions.

To learn more about test solutions, here

https://brainly.com/question/10557214

#SPJ4

As listed in a table of standard electrode potentials, the reactants in the half-reactions are potential reducing agents, while the products of the half-reactions are potential oxidizing agents.

This is because electrode potentials are a measure of the tendency of a substance to gain or lose electrons, and reducing agents have a tendency to donate electrons (thus becoming oxidized) while oxidizing agents have a tendency to accept electrons (thus becoming reduced).

In the context of standard electrode potentials, the reactants in the half-reactions are potential reducing agents, while the products of the half-reactions are potential oxidizing agents.

In an electrochemical cell, the potential difference or voltage between an electrode and a reference electrode is referred to as the electrode potential. The difference in chemical potentials of the species engaged in the oxidation and reduction reactions at the electrode surface is what causes this potential difference.

The direction and amplitude of the electron flow in an electrochemical process can be calculated using the electrode potential, which is a measurement of the electrode's propensity to either lose or gain electrons. It is expressed in millivolts (mV) or volts (V).

Learn more about electrode potentials here:

https://brainly.com/question/31364460

#SPJ11

An electron-withdrawing group (EWG) is a substituent that decreases the electron density of an aromatic ring in an electrophilic aromatic substitution reaction.

Examples of EWGs include halogens, nitro groups, and sulfonic acid groups. Halogens are the most common EWGs. They are highly electronegative and can form strong bonds with the aromatic carbon atoms, thereby decreasing the electron density of the aromatic ring.

Nitro groups and sulfonic acid groups are also highly electronegative and can form strong bonds with the aromatic carbon atoms, thereby decreasing the electron density of the aromatic ring.

In addition, nitro groups can act as electron-withdrawing groups in electrophilic aromatic substitution reactions by delocalizing the negative charge in the nitro group onto the aromatic ring.

Sulfonic acid groups can also delocalize the negative charge to the aromatic ring, making them excellent electron-withdrawing groups in electrophilic aromatic substitution reactions.

To learn more about electrophilic visit:

https://brainly.com/question/9643304

#SPJ4

In an electrophilic aromatic substitution reaction, an electron-withdrawing group is a substituent that has a greater affinity for electrons and thus reduces the electron density of the aromatic ring. Common electron-withdrawing groups include nitro (-NO2), carbonyl (-C=O), and halogens (like -F, -Cl, -Br, -I).

To identify an electron-withdrawing group in a specific electrophilic aromatic substitution reaction, look for substituents with high electronegativity or those that can stabilize a positive charge on the aromatic ring. These groups typically deactivate the ring towards further electrophilic aromatic substitution reactions.

To know more about electrophilic aromatic substitution reaction:

https://brainly.com/question/30761476

#SPJ11

The five common acid used in industry are Hydrochloric acid, Sulfuric acid, Nitric acid, Acetic acid, and Phosphoric acid.

Here are the characteristic properties and typical uses of five common acids used in industry:

1. Hydrochloric acid: This acid is a strong mineral acid with the formula HCl. It is highly corrosive and has a pungent smell. Hydrochloric acid is used in the production of PVC, the purification of table salt, and the pickling of steel.

2. Sulfuric acid: This is a strong mineral acid with the formula H2SO4. It is highly corrosive and can cause severe burns. Sulfuric acid is used in the production of fertilizers, detergents, and dyes. It is also used in the manufacturing of lead-acid batteries.

3. Nitric acid: This is a strong mineral acid with the formula HNO3. It is highly corrosive and can be explosive in certain conditions. Nitric acid is used in the production of fertilizers, plastics, and dyes. It is also used to purify metals like gold and silver.

4. Acetic acid: This is a weak organic acid with the formula CH3COOH. It has a sharp and pungent smell and is commonly found in vinegar. Acetic acid is used in the production of textiles, plastics, and paints. It is also used in the food industry as a preservative.

5. Phosphoric acid: This is a weak mineral acid with the formula H3PO4. It is commonly used in the production of fertilizers and detergents. Phosphoric acid is also used in the food and beverage industry as a flavoring agent, and in the pharmaceutical industry as an ingredient in some medications.

To learn more about Hydrochloric acid click here

brainly.com/question/15102013

#SPJ11

The carbon-hydrogen bond distances in methanol and formaldehyde are expected to be significantly different, with methanol having larger C-H bond distances.

The bond distance between two atoms is influenced by the size of the atoms, the number of bonds they form with other atoms, and the electronegativity difference between the two atoms. In methanol (CH3OH), the carbon atom is bonded to three hydrogen atoms and one oxygen atom, while in formaldehyde (HCHO), the carbon atom is bonded to two hydrogen atoms and one oxygen atom.

The oxygen atom in methanol is more electronegative than the carbon atom, which results in a greater electron density around the carbon atom and thus, a longer C-H bond distance. Additionally, the presence of the bulky methyl group in methanol causes steric hindrance, making it more difficult for the hydrogen atoms to approach the carbon atom, further increasing the bond distance.

In contrast, in formaldehyde, the carbon atom is bonded to only two hydrogen atoms, and the presence of the oxygen atom draws electron density away from the carbon atom, resulting in a shorter C-H bond distance.

Therefore, we can expect that the C-H bond distances in methanol will be larger than those in formaldehyde.

learn more about electronegativity here:

https://brainly.com/question/14481608

#SPJ11

The concentration of the diluted HCl solution is 0.363 M, rounded to 3 decimal places.

When a stock solution is diluted, the number of moles of the solute (in this case, HCl) remains constant. We can use the following equation to find the concentration of the diluted solution:

M1V1 = M2V2

where M1 is the initial concentration of the stock solution, V1 is the volume of the stock solution used, M2 is the final concentration of the diluted solution, and V2 is the final volume of the diluted solution.Substituting the given values, we get:

(3.31 M) × (17.5 mL) = M2 × (159 mL)

Solving for M2, we get:

M2 = (3.31 M × 17.5 mL) / 159 mL = 0.363 M.

For such more questions on Diluted HCl:

https://brainly.com/question/24613812

#SPJ11

The volume is the equivalent to the 0.0015 m³ is the 1.5 × 10³ cm³.

The volume of the substance which can be regarded as the quantity of the specific substance as :

The Volume = 0.0015 m³

The conversion of the m to the cm is as :

1 m³ = 1000000 cm³

The conversion of the m to the cm is as :

1 m³ = 10⁶ cm³

The conversion of the 0.0015 m³ to the cm³ is as :

0.0015 m³ = 0.0015 m³ × ( 1000000 cm³ / 1 m³ )

0.0015 m³ = 1.5 × 10³ cm³.

The conversion of the 0.0015 m³ (meter cubic ) to the cm³ ( cubic centimeter ) is the  1.5 × 10³ cm³.

To learn more about volume here

https://brainly.com/question/3553891

#SPJ4

We are given that 1 drop of 0.25 M HCl is added to 3 mL of water, and we need to find the concentration of H+ ions and the pH of the solution is  2.39

First, let's determine the volume of the HCl solution in the mixture. Since 1 drop of acid is equal to 50 microliters, we have 50 microliters = 0.05 mL

Now, let's find the total volume of the mixture (HCl + water):
0.05 mL (HCl) + 3 mL (water) = 3.05 mL

Next, we need to calculate the moles of H+ ions from the HCl solution. We know that the concentration of the HCl solution is 0.25 M, so:
moles of H+ = (0.25 mol/L) × (0.05 L/1000) = 0.0000125 mol

To find the concentration of H+ ions in the mixture, we divide the moles of H+ by the total volume of the mixture:
[H+] = (0.0000125 mol) / (3.05 L/1000) = 0.004098 mol/L

Now we can calculate the pH of the solution using the formula:
pH = -log10[H+]
pH = -log10(0.004098) ≈ 2.39

The pH of the solution is approximately 2.39 after adding 1 drop of 0.25 M HCl to 3 mL of water.

The Question was Incomplete, Find the full content below :

Please show explanation: If 1 drop of acid is equal to 50 microliter. Calculate the concentration of H+ ion and the pH of the solution when 1 drop of 0.25 M HCl is added to 3 mL water?

Know more about  concentration here:

https://brainly.com/question/17206790

#SPJ11  

Molecules with polar functional groups behave differently than those with nonpolar functional groups due to their distinct properties. Polar functional groups contain an unequal distribution of electron density, leading to the presence of partial positive and negative charges. This results in stronger intermolecular forces, such as hydrogen bonding, dipole-dipole interactions, and increased solubility in polar solvents like water.

On the other hand, nonpolar functional groups have an equal distribution of electron density, which means there are no partial charges. These molecules experience weaker intermolecular forces, like van der Waals or London dispersion forces. Consequently, they tend to be less soluble in polar solvents but more soluble in nonpolar solvents, like hydrocarbons.

In summary, the presence of polar or nonpolar functional groups impacts a molecule's properties, including intermolecular forces and solubility in different solvents.

Learn more about partial charges here:

https://brainly.com/question/10654188

#SPJ11

The pink supernatant obtained from the centrifuged bloody stool sample of the neonate was likely to contain bilirubin. Bilirubin is a yellow-orange pigment that is produced from the breakdown of heme in red blood cells.

Normally, bilirubin is metabolized in the liver and excreted in bile. However, in neonates, the liver is not fully developed, and bilirubin may accumulate in the blood, causing jaundice.

The yellow color observed in the second tube, after adding 0.25 M sodium hydroxide, indicates the presence of conjugated bilirubin. Conjugated bilirubin is a water-soluble form of bilirubin that is excreted in bile.

Alkaline conditions (due to the addition of sodium hydroxide) convert unconjugated bilirubin into its water-soluble form, conjugated bilirubin. The rapid change to yellow color in the second tube suggests that the neonate had an excess of conjugated bilirubin, indicating a possible liver disease or other underlying condition that impairs bilirubin metabolism.

In summary, the yellow color change in the second tube indicates the presence of conjugated bilirubin in the bloody stool sample of the neonate, suggesting a possible liver disease or other underlying condition.

To know more about bilirubin, refer here:

https://brainly.com/question/14426528#

#SPJ11

The moles of solute particles are produced by adding one mole of each of the following to water are :- Sodium nitrate: 2 moles of solute particles - Glucose: 1 mole of solute particles - Aluminum chloride: 4 moles of solute particles - Potassium iodide: 2 moles of solute particles

When one mole of sodium nitrate is added to water, it dissociates into two moles of solute particles (one mole of sodium ions and one mole of nitrate ions).
When one mole of glucose is added to water, it does not dissociate into ions and remains as one mole of solute particles.
When one mole of aluminum chloride is added to water, it dissociates into four moles of solute particles (one mole of aluminum ions and three moles of chloride ions).
When one mole of potassium iodide is added to water, it dissociates into two moles of solute particles (one mole of potassium ions and one mole of iodide ions).

When dissolving these compounds in water, we will get different numbers of moles of solute particles for each substance:

1. Sodium nitrate (NaNO3): One mole of NaNO3 will dissociate into 1 mole of Na+ ions and 1 mole of NO3- ions. Total moles of solute particles: 1 + 1 = 2 moles.

2. Glucose (C6H12O6): Glucose does not dissociate in water as it's a covalent compound. Therefore, one mole of glucose will produce 1 mole of solute particles.

3. Aluminum chloride (AlCl3): One mole of AlCl3 will dissociate into 1 mole of Al3+ ions and 3 moles of Cl- ions. Total moles of solute particles: 1 + 3 = 4 moles.

4. Potassium iodide (KI): One mole of KI will dissociate into 1 mole of K+ ions and 1 mole of I- ions. Total moles of solute particles: 1 + 1 = 2 moles.

In summary:
- Sodium nitrate: 2 moles of solute particles
- Glucose: 1 mole of solute particles
- Aluminum chloride: 4 moles of solute particles
- Potassium iodide: 2 moles of solute particles

Visit here to learn more about  compounds : https://brainly.com/question/14117795
#SPJ11

To determine how many moles of solute particles are produced by adding one mole of each of the following to water: Sodium nitrate, Glucose, Aluminum chloride, and Potassium iodide, we need to consider their dissociation or ionization in water.

1. Sodium nitrate (NaNO₃): This compound dissociates completely in water, producing one Na⁺ ion and one NO₃⁻ ion. So, adding 1 mole of sodium nitrate to water will produce 1 mole of Na⁺ and 1 mole of NO₃⁻ ions, totaling 2 moles of solute particles.

2. Glucose (C₆H₁₂O₆): This is a covalent compound and does not dissociate into ions in water. Adding 1 mole of glucose to water will result in 1 mole of solute particles.

3. Aluminum chloride (AlCl₃): This compound dissociates completely in water, producing one Al³⁺ ion and three Cl⁻ ions. So, adding 1 mole of aluminum chloride to water will produce 1 mole of Al³⁺ and 3 moles of Cl⁻ ions, totaling 4 moles of solute particles.

4. Potassium iodide (KI): This compound dissociates completely in water, producing one K⁺ ion and one I⁻ ion. So, adding 1 mole of potassium iodide to water will produce 1 mole of K⁺ and 1 mole of I⁻ ions, totaling 2 moles of solute particles.

In summary, adding one mole of each of the compounds to water will produce:
- Sodium nitrate: 2 moles of solute particles
- Glucose: 1 mole of solute particles
- Aluminum chloride: 4 moles of solute particles
- Potassium iodide: 2 moles of solute particles

To know more about ionization in water:

https://brainly.com/question/8839239

#SPJ11

The visuospatial buffer stores visual information, and the articulatory rehearsal loop stores verbal information, both assist the central executive in the short-term storage and manipulation of information.

The cognitive mechanism known as working memory enables humans to temporarily store and manage data required for ongoing cognitive processes. The visuospatial buffer, articulatory rehearsal loop, and other subsystems are all controlled by the central executive, which is also in charge of focusing attention on them and coordinating their operations.

While the articulatory rehearsal loop briefly stores verbal information through subvocal repetition, the visuospatial buffer momentarily stores visual and spatial information. Both subsystems offer short-term storage for data that the central executive is likely to need shortly for ongoing cognitive processes.

Learn more about manipulation:

https://brainly.com/question/30775783

#SPJ4

Within working memory, the visuospatial buffer and articulatory rehearsal loop serve as "helpers" by providing short-term storage of information that is likely to be needed soon by the central executive.

The visuospatial buffer is responsible for temporarily storing visual and spatial information, such as mental images or spatial relationships, while the articulatory rehearsal loop temporarily stores verbal information, such as words or numbers, through subvocalization or repetition. Together, these two components of working memory help facilitate the processing and manipulation of information by the central executive, which is responsible for coordinating and integrating information from various sources.

Learn more about mental images here: brainly.com/question/30050718

#SPJ11

Answer:

14.9 g of co2 would be produced.

Explanation:

First, let's balance the equation:

C3H8 + 5O2 → 3CO2 + 4H2O

Now, we can use stoichiometry to determine the amount of CO2 produced. We know from the balanced equation that for every 1 mole of C3H8, 3 moles of CO2 are produced. We can use the molar mass of C3H8 (44.1 g/mol) to convert the given 5 g to moles:

5 g C3H8 / 44.1 g/mol = 0.113 moles C3H8

Using the mole ratio from the balanced equation, we can determine how many moles of CO2 are produced:

0.113 moles C3H8 x (3 moles CO2 / 1 mole C3H8) = 0.339 moles CO2

Finally, using the molar mass of CO2 (44.0 g/mol), we can convert moles of CO2 to grams:

0.339 moles CO2 x 44.0 g/mol = 14.9 g CO2

Therefore, if you had 5g of C3H8, 14.9 g of CO2 would be produced.

The radial node in an atomic orbital refers to the point where the probability of finding an electron is zero. For the 2s orbital in the He+ ion, the location of the radial node can be calculated using the radial distribution function.

This function is dependent on the distance of the electron from the nucleus and the nuclear charge. For the He+ ion, the location of the radial node is approximately 1.69a0.

Similarly, for the Li2+ ion, the location of the radial node for the 2s orbital can also be calculated using the radial distribution function. In this case, the location of the radial node is approximately 2.11a0.

As the nuclear charge increases, the location of the radial node moves closer to the nucleus. This is because the increased nuclear charge exerts a stronger pull on the electrons, causing them to spend more time closer to the nucleus. This also means that the radial distribution function is more tightly bound to the nucleus, resulting in a smaller radius for the node.

know more about atomic orbital here

https://brainly.com/question/28240666#

#SPJ11

Bacteria are most important in the process of nitrogen fixation. That is option C.

Nitrogen fixation is defined as the important step in nitrogen cycle that aids in the conversation of the inert nitrogen gas to more-reactive nitrogen compounds such as ammonia, nitrates, or nitrites.

The bacteria microorganisms such as Azotobacter, Bacillus, Clostridium, and Klebsiella help in nitrogen fixation of nitrogen cycle pathway.

Therefore, bacteria are most important in the process of nitrogen fixation.

Learn more about combustion here:

https://brainly.com/question/29671504

#SPJ1

75 liters of a 0.20% (m/v) KCl IV solution can be prepared from 3.0 L of a 5.0% (m/v) stock solution.

To determine the amount of a 0.20% (m/v) KCl IV solution that can be prepared from a 5.0% (m/v) stock solution, the following formula can be used:

C1V1 = C2V2

where C1 is the concentration of the stock solution, V1 is the volume of the stock solution used, C2 is the desired concentration of the final solution, and V2 is the volume of the final solution.

In this case, C1 = 5.0%, V1 = 3.0 L, C2 = 0.20%, and V2 is what we are trying to find.

First, convert the percentages to decimals:

C1 = 0.050

C2 = 0.0020

Now we can plug in the values and solve for V2:

(0.050)(3.0) = (0.0020)(V2)

0.15 = 0.0020V2

V2 = 75 L

Therefore, 75 liters of a 0.20% (m/v) KCl IV solution can be prepared from 3.0 L of a 5.0% (m/v) stock solution.

Learn more about stock solution.

https://brainly.com/question/25256765

#SPJ4

75 liters of a 0.20% (m/v) KCl IV solution can be prepared from 3.0 L of a 5.0% (m/v) stock solution.

To determine the amount of a 0.20% (m/v) KCl IV solution that can be prepared from a 5.0% (m/v) stock solution, the following formula can be used:

C1V1 = C2V2

where C1 is the concentration of the stock solution, V1 is the volume of the stock solution used, C2 is the desired concentration of the final solution, and V2 is the volume of the final solution.

In this case, C1 = 5.0%, V1 = 3.0 L, C2 = 0.20%, and V2 is what we are trying to find.

First, convert the percentages to decimals:

C1 = 0.050

C2 = 0.0020

Now we can plug in the values and solve for V2:

(0.050)(3.0) = (0.0020)(V2)

0.15 = 0.0020V2

V2 = 75 L

Therefore, 75 liters of a 0.20% (m/v) KCl IV solution can be prepared from 3.0 L of a 5.0% (m/v) stock solution.


Learn more about stock solution.

brainly.com/question/25256765

#SPJ11

Answer:1.0L

Explanation:

Molar mass of NaCl = atomic mass of Na + atomic mass of Cl

= 22.99 g/mol + 35.45 g/mol

= 58.44 g/mol

Now, we can calculate the moles of NaCl:

Moles of NaCl = Mass of NaCl / Molar mass of NaCl

= 28 g / 58.44 g/mol

≈ 0.479 moles

Next, we can rearrange the molarity formula to solve for the volume of the solution:

Volume of solution = Moles of solute / Molarity

= 0.479 moles / 0.479 M

= 1 L

The volume of the solution can be determined using the formula for molarity. From calculations, the volume of the solution has been found out to be 1 liter.

To determine the volume of the solution, we need to use the formula for molarity which is given as:

Molarity (M) = [tex]\frac{moles of solute}{volume of solution}[/tex]

First, we need to calculate the moles of NaCl. The molar mass of NaCl is 58.44 g/mol.

Moles of NaCl = [tex]\frac{mass of NaCl}{molar mass of NaCl}[/tex]

= [tex]\frac{28}{58.44}[/tex]

= 0.479 mol

Now, we can rearrange the formula for molarity to solve for the volume of the solution:

Volume of solution (in liters) = [tex]\frac{moles of solute}{Molarity}[/tex]

= [tex]\frac{0.479}{0.479}[/tex]

= 1 liter

Therefore, the volume of the solution is 1 liter.

Learn more about molarity in:

https://brainly.com/question/16727614

#SPJ12

Reducing sugars are a type of sugar that has a free aldehyde group. Option A is the correct answer.

This aldehyde group is capable of reducing other compounds, which is where the name "reducing sugar" comes from. Examples of reducing sugars include glucose, fructose, maltose, and lactose.

These sugars are commonly found in foods such as fruits, honey, and milk.

Non-reducing sugars, on the other hand, do not have a free aldehyde group and are unable to reduce other compounds.

Examples of non-reducing sugars include sucrose and trehalose. It is important to understand the differences between reducing and non-reducing sugars, as they can have different effects on food processing and health.

Learn more about the aldehyde at

https://brainly.com/question/29275681

#SPJ4

Reducing sugars are a type of sugar that has a free aldehyde group. Option A is the correct answer.

This aldehyde group is capable of reducing other compounds, which is where the name "reducing sugar" comes from. Examples of reducing sugars include glucose, fructose, maltose, and lactose.

These sugars are commonly found in foods such as fruits, honey, and milk.

Non-reducing sugars, on the other hand, do not have a free aldehyde group and are unable to reduce other compounds.

Examples of non-reducing sugars include sucrose and trehalose. It is important to understand the differences between reducing and non-reducing sugars, as they can have different effects on food processing and health.

Learn more about the aldehyde at

brainly.com/question/29275681

#SPJ4

Stratus, cumulus, and cirrus clouds are three different types of clouds that can be identified based on their distinct characteristics.

Stratus clouds that grow in flat, homogeneous layers are known as stratus clouds. They are typically gray or white in appearance and frequently cover the majority or all of the sky. Light precipitation, such as drizzle or light rain, might be expected from stratus clouds.

Cumulus clouds are puffy, white clouds that look like cotton balls. They are normally associated with clear skies, but they can expand into larger, darker clouds capable of bringing thunderstorms. Cumulus clouds may be found at all levels of the atmosphere, from the ground to the upper altitudes.

Cirrus clouds are high-level clouds made of ice crystals. They are thin, wispy clouds that can seem white but also pink or orange at sunrise or sunset. Cirrus clouds frequently signify favorable weather, but they can also indicate an impending storm system.

Find out more on stratus here: https://brainly.com/question/91938

#SPJ1

Based on the provided information, the unknown substance exists as ions under normal conditions and these ions move quickly in random directions. The state of matter of this substance is likely to be plasma, as plasma consists of highly energetic and fast-moving ions.

Based on the given observations, it can be concluded that the unknown substance is in the state of matter known as plasma.Plasma is a unique state of matter that consists of highly energized and ionized particles, including free electrons, ions, and neutral atoms or molecules. In this state, the electrons have been stripped away from the atoms or molecules, creating a mixture of charged particles. These charged particles move rapidly in random directions, colliding with other particles and creating an ever-changing plasma cloud.Plasma is often referred to as the fourth state of matter, after solid, liquid, and gas. It is found in many natural and man-made settings, including lightning, stars, flames, and certain types of lamps. Plasma is also used in many industrial and scientific applications, such as plasma cutting, plasma TVs, and plasma physics research.In summary, the given observations of highly energized and ionized particles that move quickly in random directions suggest that the unknown substance is in the plasma state of matter.

Learn more about plasma here

https://brainly.in/question/8746180

#SPJ11

Based on your description, the unknown substance exists as ions moving quickly in random directions under normal conditions. This behavior is characteristic of a substance in the plasma state of matter. Plasma consists of ionized particles and exhibits high energy and randomness in particle movement.

Based on the observation that the particles of the unknown substance exist as ions and move quickly in random directions, it can be concluded that the state of matter of the substance is a plasma. Plasmas are ionized gases in which some or all of the atoms have been stripped of their electrons, resulting in a mixture of positively charged ions and negatively charged electrons. Plasmas are commonly found in stars, lightning, and certain types of flames, as well as in many industrial and laboratory settings.

Learn more about plasma here:

https://brainly.com/question/31510915

#SPJ11

When 45 g of sodium chloride is dissolved in 350 ml of water, the percentage mass by volume will be 12.9%. Correct option will be option 3.

Concentration of solution is usually expressed as % m/v when the amount of solute and volume of solution are given. It means the percentage of amount of substance in the given volume of the solution. Here the solution is made by mixing 45.0 g of sodium chloride in 350 ml of water.

So,  Ratio = mass/ volume = mass of solute/ volume of solution

                              = 45 / 350 = 0.129

Percentage m/v = 0.129 × 100 = 12.9 %

So here the % m/v will be 12.9%. Option 3 is the right answer.

For more information regarding concentration of solution, kindly refer

https://brainly.com/question/19863389

#SPJ4

WHne the helium gas occupies 12.4 L at 23°C and 0.956 atm,  then at 40°C and 0.956 atm the volume of the helium gas is 13.1 L.

We can use the combined gas law to solve this problem, which relates the pressure, volume, and temperature of a gas in a closed system. The well-known expression for the combined gas law is:

(P₁ x V₁) / T₁ = (P₂ x V₂) / T₂

We are given that P₁ = P₂ = 0.956 atm, V₁ = 12.4 L, T₁ = 23°C = 296 K, and T₂ = 40°C = 313 K. Putting  these values into the gas formula, we obtain the following:

(0.956 atm x 12.4 L) / 296 K = (0.956 atm x V₂) / 313 K

Solving for V₂, we get:

V₂ = (0.956 atm x 12.4 L x 313 K) / (296 K x 0.956 atm) = 13.1 L

Therefore, the volume of the helium gas at 40°C and 0.956 atm is 13.1 L.

Learn more about  combined gas law  here:

https://brainly.com/question/30458409

#SPJ1

Answer:

.....................................................

The equilibrium concentration for Fe(SCN)2 is: [Fe(SCN)2+] = 2.81 x 10-10 M (rounded to three significant figures)

The equilibrium concentration for Fe(SCN)2 can be calculated using the equilibrium constant expression (Kc) for the reaction:

Fe3+ + SCN- ⇌ Fe(SCN)2+

Kc = [Fe(SCN)2+]/[Fe3+][SCN-]

Substituting the given equilibrium concentrations, we get:

Kc = [Fe(SCN)2+]/(5.0 x 10-4)(7.5 x 10-4)

If we assume that the initial concentration of Fe(SCN)2 is zero (since it is a product of the reaction), then at equilibrium, the concentration of Fe(SCN)2 will be equal to the numerator of the Kc expression:

[Fe(SCN)2+] = Kc x [Fe3+][SCN-]

[Fe(SCN)2+] = (Kc) x (5.0 x 10-4)(7.5 x 10-4)

Therefore, the equilibrium concentration for Fe(SCN)2 is: [Fe(SCN)2+] = 2.81 x 10-10 M (rounded to three significant figures)

Visit here to learn more about  equilibrium concentration  : https://brainly.com/question/16645766
#SPJ11

The no of grams of aluminum are required to react with 95ml of 3. 3m hydrochloric acid, HCI is 2.82 g .

To determine the grams of aluminum required to react with 95 mL of 3.3M hydrochloric acid (HCl), you need to use stoichiometry. The balanced chemical equation for the reaction is:

2 Al + 6 HCl → 2 Al[tex]Cl_{3}[/tex] + 3 H2

First, convert the volume of HCl to moles using the molarity:

moles HCl = (3.3 moles/L) × (95 mL × (1 L / 1000 mL)) = 0.3135 moles HCl

Next, use the stoichiometric ratio to find the moles of aluminum:

moles Al = (0.3135 moles HCl) × (2 moles Al / 6 moles HCl) = 0.1045 moles Al

Finally, convert moles of aluminum to grams using the molar mass of aluminum (26.98 g/mol):

grams Al = (0.1045 moles Al) × (26.98 g/mol) = 2.82 g

Therefore, 2.82 grams of aluminum are required to react with 95 mL of 3.3 M hydrochloric acid.

Know more about   aluminum  here:

https://brainly.com/question/27859211

#SPJ11

Minerals required in amounts greater than 100mg/day, including sodium, chloride, potassium, calcium, phosphorus, magnesium, and sulfur, are classified as major minerals or macrominerals.

Major minerals, often known as macrominerals, are defined as those that must be consumed in doses of more than 100 milligrammes daily. These include calcium, phosphorus, magnesium, potassium, sodium, chloride, and sulphur. The construction and maintenance of bone and tissue, the transmission of nerve impulses, the support of muscular function, and many other biological processes depend on these minerals.

The maintenance of good health depends on getting enough of these minerals, and shortages can cause several health issues, including electrolyte imbalances, weakening bones, and cognitive impairment.

Learn more about phosphorus:

https://brainly.com/question/25352398

#SPJ4

The rate of the reaction would be affected, and it would increase significantly when using excess hydrochloric acid.

Performing an SN1 reaction on a tertiary alcohol using 1 equivalent of hydrochloric acid is expected to result in a relatively slow reaction due to the stability of the carbocation intermediate.

However, if the same reaction is performed using 10 equivalents of hydrochloric acid, the rate of the reaction would increase significantly. This is because the excess acid would act as a catalyst and facilitate the formation of the carbocation intermediate,

thereby increasing the rate of the reaction. The excess acid would not react with itself, as it is not a reactive species in this context. However, it is important to note that using too much acid could lead to undesired side reactions and affect the overall yield of the reaction.

To learn more about : hydrochloric

https://brainly.com/question/3229358

#SPJ11

The same amount of moles of Ar would diffuse through the same membrane in 52.0 minutes more slowly than the sample of Br2 that was provided.

According to Graham's law, a gas's rate of effusion is inversely proportional to its square root density.

The formula for the ratio of the rates of effusion of two gases is

rate of effusion of gas 1/rate of effusion of gas 2 = √(molar mass of gas 2/molar mass of gas 1)

The molar mass of Br2 is:

Molar mass of Br2 = 2 × atomic mass of Br

= 2 × 79.9 g/mol

= 159.8 g/mol

Now, we can apply Graham's law to get Ar's effusion rate relative to Br2:

rate of effusion of Ar/rate of effusion of Br2 = √(molar mass of Br2/molar mass of Ar)

= √(159.8 g/mol/39.95 g/mol)

= √4 = 2

Ar takes twice as long as Br2 to pass through the membrane before it may effuse. Therefore:

time for Ar to effuse = 2 × time for Br2 to effuse

= 2 × 26.0 min

= 52.0 min

To know more about Graham's law visit:-

https://brainly.com/question/12415336

#SPJ1

46.01 mL of the 17% H2SO4 solution contains 8.37 g of H2SO4, calculated using mass percent, density, and volume.

To decide the volume of a 17% by mass H2SO4 arrangement that contains 8.37 g of H2SO4, we want to utilize the thickness and the mass percent of the arrangement.

The mass percent of an answer is the mass of the solute separated by the mass of the arrangement, increased by 100. The thickness of an answer is the mass of the arrangement separated by its volume. Utilizing these connections, we can set up the accompanying conditions:

mass percent = (mass of solute/mass of arrangement) x 100

thickness = mass of arrangement/volume of arrangement

We can modify the principal condition to settle for the mass of arrangement:

mass of arrangement = mass of solute/(mass percent/100)

Subbing the given qualities, we get:

mass of arrangement = 8.37 g/(17/100) = 49.23 g

Then, we can utilize the thickness to track down the volume of the arrangement:

thickness = mass of arrangement/volume of arrangement

volume of arrangement = mass of arrangement/thickness = 49.23 g/1.07 g/cm3 ≈ 46.01 mL

Thusly, 46.01 mL of the 17% by mass H2SO4 arrangement contains 8.37 g of H2SO4.

To learn more about  moles of H2SO4 are contained in solution, refer:

https://brainly.com/question/29383656

#SPJ4

The complete question is:

A 17% by mass H2SO4 (aq) solution has a density of 1.07 g/mL. How many milliliters of solution contain 8.37 g of H2SO4? What is the molality of H2SO4 in solution? What mass (in grams) of H2SO4 is in 250 mL of solution?

The  ionization energy and electronegativity are important factors to consider when determining whether an element will gain or lose electrons when it forms ions.

Ionization energy and electronegativity are two important factors that determine whether an element will gain or lose electrons when it forms ions.

Ionization energy is the energy required to remove an electron from an atom, while electronegativity is the measure of an atom's ability to attract electrons towards itself.

If an element has a high ionization energy and a low electronegativity, it is more likely to lose electrons when it forms ions. This is because it requires a lot of energy to remove an electron from the atom, and the atom does not have a strong attraction for electrons.

Conversely, if an element has a low ionization energy and a high electronegativity, it is more likely to gain electrons when it forms ions. This is because it is easier to remove electrons from the atom, and the atom has a strong attraction for electrons.

To learn more about : electronegativity

https://brainly.com/question/24977425

#SPJ11