Answer:
Ionic and covalent bonds are different in many ways.
Explanation:
A covalent bond is where electrons are shared between several atoms and is apparent in H20 also known as water.
Ionic bonds occur when an atom "gives away" one of its electrons to another one, and due to this difference in charge, they are attracted to each other.
Here is a list of differences:
Ionic bonds are typically strongerCovalent bonds have atoms that are electrically neutral, while ionic bonds have electrically charged atomsCovalent bonds are far more common in nature than ionic bondsCovalent bonds from between two non metals, whereas ionic bonds are formed by a metal and a nonmetalIonic compounds are usually solid whereas Covalent compounds are usually liquid or gasCovalent bonds can form between two atoms of the same element, where this is not possible with ionic bonds.Here are some similarities:
Valence electrons are involved in both bonding processesThe result of both bonds is electrically neutral, even if each individual atom isn'tWhen atoms bond together, they release heat whether or not they are covalent or ionicBoth covalent and ionic bonds lead to stable compounds.Hope this helps!
A drug problem can quickly consume A)a small portions of a person income B)the bulk of a person income C)a person excess income
Answer:
b
Explanation:
a drug problem consumes the bulk of a persons income because drugs are expensive to buy
A drug problem can quickly consume the bulk of a person income
What is a drug problem?A drug is any chemical substance that causes a change in an organism's physiology or psychology when consumed. Drug abuse or substance abuse refers to the use of certain chemicals for the purpose of creating pleasurable effects on the brain.
Drug use can have significant and damaging short-term and long-term effects. Taking some drugs can be particularly risky, especially if you take high doses or combine them with other drugs or alcohol.
People of any age, sex or economic status can become addicted to a drug. Certain factors can affect the likelihood and speed of developing an addiction.
The best way to prevent an addiction to a drug is not to take the drug at all. If your doctor prescribes a drug with the potential for addiction, use care when taking the drug and follow the instructions provided by your doctor. Thus you can save your income.
The correct answer is option B.
Learn more about drug problem, refer:
https://brainly.com/question/23284149
#SPJ2
How much energy does a 185 nm wave of light have? (The speed of light in a
vacuum is 3.00 x 108 m/s, and Planck's constant is 6.626 x 10-34 Jos.)
A. 1.07 x 10-18 J
B. 8.38 x 1034j
C. 9.31 x 1017 J
D. 3.68 x 10-32 J
O
Answer: A. 1.07 x 10∧ -18 J
Explanation:
The energy can be calculated by using this relation; E = hc / ∧
Where E = energy
h = Planck's constant = 6.626 x 10-34joules
c = speed of light = 3.00 x 10∧8 m/s
∧ = wavelenght = 185 nm = 185 x 10∧ -9m
Therefore; E= hc / ∧
= (6.626 x 10-34 j/s) x ( 3.00 x 10∧8 m/s) / 185 x 10∧ -9m
= 1.987 x 10 ∧ -25 / 185 x 10∧ -9m
= 1.07 x 10∧ -18 J
~ WILL MARK AS BRAINLIEST ~
What is the mass of 15% of solution of lime that is formed by dissolving 30g of calcium hydroxide in water?
Answer:
200 grams is the mass of 15% of the solution of lime that is formed by dissolving 30g of calcium hydroxide in water.
Explanation:
Mass of solution = M
Mass percentage of the solution of lime = 15%
Mass of lime or calcium hydroxide = m = 30 g
The Formula of mass percentage is given as :
[tex]m/m\%=\frac{m}{M}\times 100[/tex]
On substituting the values in ab above formula :
[tex]15\%=\frac{30 g}{M}\times 100[/tex]
[tex]M=\frac{30 g}{15}\times 100=200 g[/tex]
200 grams is the mass of 15% of the solution of lime that is formed by dissolving 30g of calcium hydroxide in water.
PLEASE HELP!! thank you Which element does X represent?
Answer:
95 Kr36
Explanation:
The process by which a large nucleus split into two smaller nuclei is called nuclear fission and occurs after the nucleus has absorbed a neutron that is a product of the radioactive decay of another atom. The formed fission fragments are unstable and extremely radioactive.
What did the photoelectric experiment demonstrate?
A. Light can cause electrons to be released from the surface of a
metal.
B. Light can deposit electrons on a metal surface.
C. Light can make metal atoms move around, producing electricity.
D. Light can heat metal enough to produce electricity.
Explanation:
When an electromagnetic wave like light hits a material, the electrons gets emitted. The emission of electrons is called photoelectric effect. The emitted electrons are called photoelectrons. In this process the transfer of energy takes place from light to an electron.
Hence, the correct option regarding the photoelectric experiment is (A) " Light can cause electrons to be released from the surface of a metal."
Describe how u would separate a mixture of salt , sand and iodine into different components. please help i will give a brainliest for this . PLEASE HELP?
to remove iodine sublime
to remove sand filter
to remove water evaporate
Explanation:
1. put the mixture in a beaker
2.Heat the mixture using a watch glass filled with cold water, the iodine will sublime at the base of the watch glass.
3.Add water to sand and salt. Stir for salt to diffuse in the water
4.Filter sand from the solution using a filter paper
5.evaporate the remaining water to remain with Salt crystals.
Sulphuric acid, also called ‘king of chemicals' has the formula H2SO4. Its appearance is different from that of hydrogen and sulphur. Give two other reasons why sulphuric acid is a compound and not a mixture.
Explanation:
Before proceeding to answering the question, we have t understand what we mean by both mixture and compound.
A mixture is the physical combination of two or more substances in which the identities are retained and are mixed in the form of solutions, suspensions and colloids.
A compound on the other hand is a chemical substance composed of many identical molecules composed of atoms from more than one element held together by chemical bonds.
The two other reason why H2SO4 is a compound and not a mixture are;
1) The components which are Hydrogen, Sulphur and Oxygen cannot be separated by physical means.
2) It has a constant melting and boiling point.
When a sample of Mg is combusted in a bomb calorimeter, 25.4 kJ of energy as heat is evolved. The calorimeter contains 7.50 x 102 g of water at an initial temperature of 18.6 °C. The specific heat capacity of water is 4.184 J/gLaTeX: \cdot⋅°C and the heat capacity of the bomb is 8.20 x 102 J/°C. Calculate the final temperature of the water and the bomb
Answer:
x = 25.02 or 25°c
Explanation:
Given:
mass of water : 7.50×10² =750 gm
Ccal = 8.20× 10² = 820 J/°c
Let assume final temp = x°c
then, heat gained by the water + heat gained by calorimeter
= 25400 J
⇒ Mw × Cw× ΔTw+ Ccal ×ΔT = 25400
⇒ 750× 4.184 × (x - 18.6) + 820 ×(x-18.6) = 25400
⇒ x = 25.02 or 25°c
The correct increasing order of Bond angle is H2O < NH3 < BCl3 < CCl4 H2O < NH3 < CCl4 < BCl3 NH3 < H2O < BCl3 < CCl4 NH3 < BCl3 < CCl4 < H2O
Answer:
H2O < NH3 < CCl4 < BCl3
Explanation:
Bond angle of a molecule or an ion can be explained by two concepts which are either by their valence shell electron pair repulsion (VSEPR) model or hybridization.
The VSEPR model determines the total number of electron pairs surrounding the central atom of the species. All the electron pairs will orient themselves in such a way as to minimize the electrostatic repulsions between them. These repulsions hence determine the geometry of the covalent bond angles around the central atom.
Hence; as the number of lone pairs increases from zero to 2 the bond angles diminish progressively.
Hybridization is the mixing and blending of two or more pure atomic orbitals to form two or moe hybrid atomic orbitals which are identical in shape and energy. During the process of formation of these hybrid orbitals, The bonds formed i.e the sigma bond and the pi bond determines the bond angle of such compound.
From the given compounds;
H20 have a bond angle of 104.5°
NH3 have a bond angle of 107°
BCl3 have a bond angle of 120°
CCl4 have a bond angle of 109.5°
thus in an increasing order of bond angle:
H2O < NH3 < CCl4 < BCl3
What is the acceleration of the object’s motion? 0.5 m/s2 -0.5 m/s2 2 m/s2 -2 m/s2
Answer: -2m/s2
Explanation:
Using the following equation ; acceleration = Change in velocity / time
i.e a = v - u / t
where 'a' = acceleration
v = final velocity
u = initial velocity
t = time
Therefore; from the graph we have acceleration to be, 0 - 6m/s / 3s = -2m/s2
determine the type of the following chemical reaction: Mg(s) + 2HCl(aq)——-> H2(g) + MgCl2(aq) a. single replacement reaction b. decomposition reaction c. combination reaction d. double replacement reaction
Answer:
a. single replacement reaction
Explanation:
Mg(s) + 2HCl(aq)——-> H2(g) + MgCl2(aq)
Mg replaces H, so this is a single replacement reaction.
A metal sample is heated and placed into the water in a calorimeter at room temperature. Which statement best describes how the calorimeter can be used to determine the specific heat capacity of the metal sample? Energy transfers to the metal from the water and calorimeter until they are all at room temperature. Energy transfers from the metal to the water and calorimeter until they are all at room temperature. Energy transfers to the metal from the water and calorimeter until they all reach a single temperature. Energy transfers from the metal to the water and calorimeter until they all reach a single temperature.
Answer:
Energy transfers from the metal to the water and calorimeter until they are all at room temperature.
Explanation:
Calorimetry is the process that is used to determine the amount of heat that has been transferred in any process. In any chemical or physical process, the amount of energy is required. This energy is measured by the process of calorimetry. A calorimeter is a device that is used in this process. The heat that has been used in the process is measured and the change in the temperature is noted.
Answer:
b
Explanation:
endothermic or exothermic?
The reaction between ammonium nitrate and water absorbs heat from the surrounding environment.
Three drops of concentrated sulfuric acid added to 100 milliliters of water in a beaker makes the beaker hot.
Ammonium chloride dissolved in a beaker of water makes the beaker cold.
Uranium atoms are split to produce nuclear energy.
Water separates into hydrogen and oxygen when an electric current is run through it.
Methane and oxygen are combined to produce methanol and heat.
Answer:
Endothermic
Exothermic
Endothermic
Exothermic
Exothermic
Exothermic
Explanation:
Endothermic is when a reaction absorbs heat.
Exothermic is when a reaction releases heat.
Endothermic reactions:
The reaction between
ammonium nitrate and
water absorbs heat
from the surrounding
environment.
Ammonium chloride dissolved
in a beaker of water makes the
beaker cold.
Water separates into
hydrogen and oxygen
when an electric current
is run through it.
Exothermic reactions:
Three drops of concentrated
sulfuric acid added to 100
milliliters of water in a beaker
makes the beaker hot.
Uranium atoms are split to
produce nuclear energy.
Methane and oxygen are
combined to produce
methanol and heat.
#platofam
The number of joules needed to raise the temperature of 32 g of water from 12 °C to 54 °C is
The specific heat of water is 4.184 J/g °C.
Answer: 5,600 J
Explanation:
Joules = mass x specific heat x temperature change
32 x 4.184 x (54 - 12)
= 133.888 x 42
= 5,623.296
(significant figures => 5,600)
How much water should be added to 12 ml of alcohol to obtain 12% alcohol solution?
Answer:
88 mL of water.
Explanation:
Data obtained from the question include the following:
Volume of alcohol = 12 mL
Percentage of alcohol = 12%
Volume of water =..?
We can thus, obtain the volume of water needed to make 12% of the alcohol solution as follow:
Percentage of the solution = 100%
Percentage of alcohol = 12%
Percentage of water =?
Percentage of water = percentage of solution – percentage of alcohol
Percentage of water = 100 – 12
Percentage of water = 88%
Since 12% of alcohol is equivalent to 12 mL of alcohol, therefore 88% of water will also be equivalent to 88 mL.
Therefore, 88 mL of water is needed to make 12% of alcohol.
3 point different between fundamental units and derived units
Answer:
Fundamental Units:
1) Fundamental units also called base units are used to describe base quantities
2) They cannot be expressed in terms of derived units.
3) Examples : Meter, Ampere, Second etc.
Derived Units:
1) Derived units are used to describe derived quantities.
2) They can be expressed in terms of fundamental units.
3) Examples: Newton, Joule, Hertz, Pascal etc.
Answer:
3diferences
Explanation:
fundamental are independent but derived are dependent
there are 7fundamental units but there are many derived units from fundamental.
meter, second, kilogram, etc are examples of fundamental but m/s^2, newton, joule, etc are derived units
Which will change will cause the gravitational force between a baseball and a soccerball
Why is making proteins important
Other than carbon being relatively small, what is another reason that carbon can form so many compounds? the ability to form four covalent bonds the ability to change shape the ability to form a diatomic molecule the ability to split its electrons
Answer:
Ability to form four covalent bonds.
Explanation:
Carbon is the first member of group 14. It is essentially a nonmetal. It is a small atom which regularly exhibits tetra valency. This means that carbon is able to form four covalent bonds to four chemical species which may be the same or different each time. This leaves room for many different possible combination patterns of carbon with other chemical species.
Hence carbon forms a very large number of compounds due to its small size and its ability for form four covalent bonds to other chemical species in any bonding situation.
Answer: the ability to form four covalent bonds
Explanation:
Which refers specifically to a heated solution that holds more dissolved solution than it can hold at a lower temperature? supersaturated undersaturated heterogeneous homogeneous
Answer:
A. Supersaturated
Explanation:
i got it right on edge 2021
The heated solution that holds more dissolved solution than it can hold at a lower temperature is supersaturated solution. Therefore, option A is correct.
What is supersaturated solution ?A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. By introducing a tiny solute crystal known as a seed crystal, the excess dissolved solvent in a super-saturated solution can begin to recrystallize.
A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. A solution is considered supersaturated if it contains more solute than is necessary to saturate it.
A solution that contains more solute than it can hold at a specific temperature is said to be supersaturated. Usually, raising a solution's temperature causes more particles to dissolve, increasing the solute concentration.
Thus, option A is correct.
To learn more about supersaturated solution, follow the link;
https://brainly.com/question/1432936
#SPJ6
For Group 2A metals, which electron is the most difficult to remove? the second the first the third All the electrons are equally difficult to remove.
Answer:
the third
Explanation:
when you remove the first the nucleur attraction becomes greater pulling the other valence electron closer thus the more you remove the harder it gets because the pull from the nucleus increases.
There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Option C is correct option.
What is periodic table?Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
The elements that belongs to Group 2A metals are alkaline earth metals, their electronic configurations is [noble gas ]ns² so, it is easy to remove first electron and then second electron but it is very difficult to remove the third electron because after removing two electron we get noble gas configuration and effective nuclear charge also increases after removal of second electron.
Therefore, the correct option is option C.
Learn more about periodic table, here:
https://brainly.com/question/11155928
#SPJ2
differentiate between short period and long period
The question is incomplete. The complete question is as follows:
Differentiate between a short period and long period production functions.
Answer:
Difference between a short period and long period production functions is as follows:
Short period: During this period at least one of the factors of production is available in a fixed quantity. For example: Framers having fixed land for growing crops.
Long period: During this period all the factors of production are variable. So change in any variable can increase the production.
I'll mark you brainliest if you answer first! - Iron filings and copper (II) sulphate solution are mixed together and they produce elemental copper and iron (II) sulphate solution. Based on the quantities of the reactants used in the experiment, determine which is the limiting reagent. For the excess reagent, determine how much in grams is left over. (2 grams of iron was used, and 7 grams of copper
Answer:
First, write an equation for the reaction involved.
Fe + CuSO4 ---> FeSO4 + Cu
Now, calculate the no. of moles added in the reaction. (n.o.m. = mass /molar mass)
No. of moles of Fe added = 2 / 55.8
= 0.0358 mol
No. of moles of CuSO4 = 7 / (63.5 +32.1+16x4)
= 0.04386 mol
From the equation, the mole ratio of Fe : CuSO4 = 1:1,
meaning 1 mole of Fe reacts with 1 mole of CuSO4.
It also indicates that the no. of moles reacted in Fe equals to the no. of moles reacted in CuSO4.
0.04386 > 0.0358
The no. of moles of CuSO4 is higher than that of Fe, meaning all moles of Fe will be reacted while not all CuSO4 reacts.
Hence Fe is the limiting reagent, and CuSO4 is in excess.
All 0.0358 moles of Fe reacts, meaning the no. of moles of CuSO4 left unreacted = 0.04386 - 0.0358
= 0.0080596mol
mass of CuSO4 unreacted = 0.0080596 x (63.5 +32.1+16x4)
= 1.28g
2.70g of Zn (s) reacts with 50.0 mL of 1.00 M HCl solution to produce hydrogen gas according to the reaction. (R = 0.08206 L·atm·K-1·mol-1) Zn(s) + 2HCl (aq) = ZnCl2 (aq) + H2(g) a) calculate mole of Zn used in this reaction b) calculate mole of HCl used in this reaction c) calculate which reactant is a limiting reactant d) calculate mole of hydrogen gas formed e) calculate volume of H2 gas at STP in Liters that will be produced during the reaction
Answer:
a. 0.0413 moles Zn
b. 0.0500 moles HCl
c. HCl is the limiting reactant
d. 0.0250 moles H₂
e. V = 0.56L
Explanation:
The reaction of Zn(s) with HCl is:
Zn(s) + 2HCl (aq) → ZnCl₂ (aq) + H₂(g)
Where 1 mole of Zn reacts with 2 moles of HCl.
a) To convert mass in grams to moles of a substance you need to use molar mass (Molar mass Zn: 65.38g/mol), thus:
2.70g Zn × (1mol / 65.38g) = 0.0413moles of Zn
b. Now, when you have a solution in molarity (Moles / L), you can know the moles of a volume of solution, thus:
Moles HCl:
50.0mL = 0.0500L × (1.00mol / L) = 0.0500 moles HCl
c. The limiting reactant is founded by using the chemical reaction as follows:
For a complete reaction of 0.0500 moles HCl you need:
0.0500 moles HCl × (1 mole Zn / 2 moles HCl) = 0.0250 moles Zn
As you have 0.0413 moles of Zn, and you need just 0.0250 moles for the complete reaction, Zn is the exces reactant and HCl is the limiting reactant
d.As HCl is limiting reactant and 2 moles of HCl react with 1 mole of H₂, moles of hydrogen formed are:
0.0500 moles HCl × (1 mole H₂ / 2 moles HCl) = 0.0250 moles H₂
e. Using PV = nRT, you can find volume of gas, thus:
PV = nRT
V = nRT / P
Where P is pressure 1atm at STP, n are moles, R is gas consant 0.08206Latm/molK and T is absolute temperature 273.15K at STP.
V = 0.0250molesₓ0.082atmL/molKₓ273.15K / 1atm
V = 0.56L
In the hydrogenation of oils the catalyst used is:
A. Pt
B. Ni
C. Fe
D. V2O5
Answer:
B
Explanation:
plz follow me and give brainliest
Which factor plays the biggest role in delaying the detection of childhood
diseases?
Answer:
poor access to health care providers
Explanation:
without health care providers you cant get tested.
what's love like? what feels are involved?
What are some similarities and differences between group 1, 0 and 7 elements on the periodic table?
Answer:
Difference : group 1 elements are known as alkali metals, group 7 elements are known as transition metals
Similarities : Both group 1 and 7 elements become more reactive as u go down and up respectively
is a process that involves the collection of information and ideas supported by evidence.
Science
Systematics
Pseudoscience
Hypothesis
Answer:
pseudoscience
Explanation:
srry that this is so late btw, hope this helps...
Answer:
Science
Explanation:
First response is NOT correct
How might a scientist confirm the results of other expirements by doing an experiment