Someone plz hello me ASAP it would be appreciated on question 7 btw

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\ [/tex]

From the question

mass = 87.3 g

density = 3.14 g/mL

We have

[tex]volume = \frac{87.3}{3.14} \\ = 27.8025477...[/tex]

We have the final answer as

Hope this helps you

Explanation:

My physiological make-up that governs the attributes I have and my climate, i.e. the conditions I have, are the variables influencing my limits. Biological make-up also regulates my prospects when they depend on my attributes, i.e. my ability and my environment , i.e. the conditions under which I am. This has been shown by experiments on twins, that our limits and opportunities are controlled by both genetics and environment.

The answer is a                                  bevasue it then becomes a chemical compound

Answer:

a

Explanation:

this would result in a compound and compounds are chemical changes so i think im right....

Answer:

A gamma ray is a penetrating form of electromagnetic radiation arising from the radioactive decay of atomic nuclei. It consists of the shortest wavelength electromagnetic waves and gives off the highest photon energy. The energy spectrum of gamma rays can be used to identify the decaying radionuclides using gamma spectroscopy.

Explanation:

Answer:

Object B has a density of 2.5 g/cm³ which is greater than object A by 1 g/cm³

Explanation:

Since we know that the formula for density is d=m/v, we can divide each mass by its corresponding volume to find the densities

12/8=1.5

20/8=2.5

So we know that object B has a greater density than object A by 1 g/cm³ (gram per cubic centimeter). Also the standard unit for density is kilograms per cubic meter but I used gram per cubic centimeter since they were the given units. 1cm=100m, 1000g=1km

Answer:

21 is the max but with the bread ypu could make 22 if you had 3 more cheese

Answer: It’s D

Explanation:

Cuz I said so

Answer: d. Shearing

Explanation:

Answer:

Ka = 4.70x10⁻⁴M

Explanation:

The general dissociation of a weak acid, HX, is:

HX(aq) ⇄ H⁺(aq) + X⁻(aq)

And Ka is written as:

Ka = [H⁺] [X⁻] / [HX]

Where [] represents the molar concentration in equilibrium of each specie.

The equilibrium is reached when X of HX is dissociate in X H⁺ and X X⁻, that is:

[HX] = 0.0129M - X

[H⁺] = X

[X⁻] = X

As pH = -log [H⁺]:

10^-pH = [H⁺] = X  = 2.239x10⁻³M

Solving:

[HX] = 0.0129M - 2.239x10⁻³M = 0.01066M

[H⁺] = 2.239x10⁻³M

[X⁻] = 2.239x10⁻³M

Ka = [H⁺] [X⁻] / [HX]

Ka = [2.239x10⁻³M] [2.239x10⁻³M] / [0.01066M]

Answer:

0.133

Explanation:

reaction between KIO3 and KI in acidic medium

IO3⁻ +5I⁻ +6h⁺ → 3I₂ + 3H₂O

I₂ reacts with thiosulphate

NaS₂O₃  → 2Na⁺ + S₂O₃²⁻

net reaction

IO⁻₃ + 6H⁺ + 6S₂O₃³⁻ → I⁻ + 3S₄O₆²⁻ + 3H₂O

mole of KIO₃

= molarity x volume

[tex]\frac{0.02mol}{L} *0.01L[/tex]

= 0.00002mol

a mole of KIO₃ has reaction with 6 mol of S₂O₃²⁻

= 2x6x10⁻⁵

= 0.00012 mol

volume = 0.90 ml

1 ml = 0.001L

0.90ML  = 0.0009L

to get concentration,

molarity/volume

= 0.00012/0.0009

= 0.133m

The concentration of the standard sodium thiosulfate solution is ; 0.133

The net chemical reaction equation

IO₃⁻  +  6H⁺  +   6S₂O₃³⁻ ---->  I⁻  +  3S₄O₆²⁻  + 3H₂O

First step : Determine the moles of  KIO₃

number of moles = molarity * volume

                            = 0.02 mol / L * 0.01 L

                            = 0.00002 mol

From the net chemical reaction equation

one ( 1 ) mole of KIO₃ reacts with 6 moles of S₂O₃²⁻

∴ number of moles in the reaction = 6 * 0.00002 = 0.00012 mol.

Final step : Determine the concentration of sodium thiosulfate solution

Given Volume = 0.90 ml = 0.0009 L

∴ concentration of sodium thiosulfate solution

   =  0.00012 / 0.0009  =  0.133

Hence we can conclude that The concentration of the standard sodium thiosulfate solution is ; 0.133

Learn more : https://brainly.com/question/15271672

Answer:

d) The rate of forward reaction equals the rate of the reverse reaction

Explanation:

A dynamic equilibrium is attained when the rate of forward reaction is the same as reverse reaction. It occurs majorly in a reversible reaction. Thus, no change occurs in the reaction.

The process can be control by the immediate removal of the product as it is formed. This ensure that the reaction stops when all reactants are used up.

Extremophiles are bacteria, archaea, as well as eukarya across all three domains of life. Cells make up every organisms.

Extremophiles contain bacteria, archaea, as well as eukarya from all three domains of life.

Any organic, biological system which works as a separate entity was referred to as an organism.

Extremophiles are organisms that can survive in harsh settings, such as those with high temperatures, radiation, salt, or pH levels. In the planet's evolutionary development, several creatures have been ecologically dominating.

To know more about Extremophiles and organisms.

https://brainly.com/question/12825206

#SPJ2

Answer:

The answer is 16

Explanation:

Answer:

A high-pressure area, high, or anticyclone, is a region where the atmospheric pressure at the surface of the planet is greater than its surrounding environment. Winds within high-pressure areas flow outward from the higher pressure areas near their centers towards the lower pressure areas further from their centers.

Explanation:

Answer:

The ball's kinetic energy is transforming to potential energy.

Explanation:

the ball is stopping resulting in potential energy

Answer:

Carbon Hydrogen

Explanation:

I believe it means carbon (C) to one atom of hydrogen (H).

Answer:

A

Explanation:

Nuclear fusion is a much more powerful reaction than any of the others.

Nuclear fusion of two hydrogen isotopes would expect to produce the most energy. Therefore, option (A) is correct.

Nuclear fusion can be defined as when two or more nuclei fuse together to form a single heavier nucleus. In this reaction, the matter is generally not conserved due to some of the mass of the nuclei being converted to energy.

For nuclear fusion, the nuclei must be brought closer to the reaction occurring. Each star in the universe, including sun, is shining due to nuclear fusion reactions. They produce large amounts of energy in this process.

In the Sun's core, hydrogen nuclei are get transformed into helium nuclei which are known as nuclear fusion. It takes place when four hydrogen nuclei fuse into each helium nucleus. During the Nuclear fusion process, some of the mass of hydrogen nuclei is transformed into energy.

Therefore, nuclear fusion is where hydrogen atoms combined to form helium to produce the most energy.

Learn more about nuclear fusion, here:

brainly.com/question/12701636

#SPJ2

Answer:

The given reaction has been the symbolization for replacement reaction. Thus, option D is correct.

The given general reaction has been:

[tex]\rm AB\;+\;CD\;\rightarrow\;AD\;+\;CB[/tex]

In the given reaction, there has presence of compound AB and CD. The reaction between the two results in the formulation of AD and CB. In the reaction, the B has been more attracted by C and forms bond with C by replacing D.

In the same way, A has been more attracted with D and forms bond with D replacing C.

The type of reaction in which the more reactive element replaces the less reactive element has been termed as replacement reaction. Thus, the given reaction has been the symbolization for replacement reaction. Thus, option D is correct.

For more information about replacement reaction, refer to the link:

https://brainly.com/question/8625202

Answer:

See explanation

Explanation:

Friedel-Crafts alkylation frequently undergo polysubstitution because the process  leads to the addition of an electron donating alkyl group, which activates the benzene ring to further alkylation. The acyl group rather deactivates the ring towards electrophilic substitution.

When benzene is reacted with t-butyl chloride, the chief disubstituted product is the para rather than ortho isomer because the increased bulk of the tert-butyl group hinders attack at the ortho-sites.

Answer:

[tex]p_2=5.17torr[/tex]

Explanation:

Hello.

In this case, by using the Clausius-Clapeyron Equation which allows us to relate the vapor pressure, temperature and heat of vaporization as shown below:

[tex]ln(\frac{p_1}{p_2} )=\frac{\Delta _vH}{R}(\frac{1}{T_2}-\frac{1}{T_1} )[/tex]

Whereas [tex]p_1[/tex] is 760 torr due to the normal conditions. In such a way, for computing the vapor pressure of benzaldehyde at 53.5 °C (326.65 K), we proceed as shown below:

[tex]\frac{p_1}{p_2} =exp[\frac{48800J/mol}{8.314\frac{J}{mol*K}}(\frac{1}{326.65K}-\frac{1}{451.0K} )]\\\\\frac{p_1}{p_2}=147.0[/tex]

Thus, the vapor pressure at the final T is:

[tex]p_2=\frac{p_1}{147.0}=\frac{760torr}{147.0}\\ \\p_2=5.17torr[/tex]

Best regards!

Answer:

C

Explanation:

It will be the same. That's what moving down a column means. The properties are going to be quite similar.

1) Both cells have a cell membrane.

2) A nucleus is present in only Eukaryote cells.

3) I'm pretty sure Prokaryote cells are bacteria.

Hope this helps!! :)

Answer:

O The sound waves are reflected.

Explanation:

When sound waves released by a bat hits an object, the sound waves are reflected back.

Bats used sound reflection for echolocation to determine the position of nearby objects.

Also, they use it to determine the shape and size of objects.

Answer:

B

The sound waves are reflected.

Explanation:

Answer:

The answer is B(scale)

Explanation:

Since the question asked about a range, the scale would be the most logical answer since scales are used to measure.

Answer:

the answer is C.

Explanation:

Answer:

✔️Ionic bonds form between metal atoms and nonmetal atoms.

✔️The less electronegative atoms transfers one or more electrons to the more electronegative atom

✔️The metal atom forms a cation and the nonmetal atom forms an anion.

✔️The attraction between ions with an opposite charge forms an ionic bond.

Explanation:

Ionic bond refers to the bond formation which occurs when there is complete and permanent transfer of electrons from one metal atom to another non-metal atom. The metals, which are electropositive (less electronegative) loose their electrons while the non-metals, which are less electropositive (more electronegative) gain the electrons.

When the metal atom looses electrons, they form cations(become positively charged) while non-metal atom forms anions (become negatively charged). When the opposite charges attract each other, they form ionic bond.

Answer:

✔️ Ionic bonds form between metal atoms and nonmetal atoms.

✔️ The less electronegative atoms transfers one or more electrons to the more electronegative atom.

✔️ The metal atom forms a cation and the nonmetal atom forms an anion.

✔️ The attraction between ions with an opposite charge forms an ionic bond.

Answer:

74.3kJ are transeferred

Explanation:

In the bomb calorimeter, the burning of C₈H₁₈ is producing heat that is been absorbed for the calorimeter and the water.

Heat absorbed calorimeter:

837J/°C * (33.8°C-15.0°C) = 15735.6J

Heat absorbed water:

C*m*ΔT

C specific heat of water (4.184J/g°C), m is mass of water (745g), and ΔT change in temperature (33.8°C - 15°C = 18.8°C)

4.184J/g°C*745g*18.8°C = 58601.1J

Heat released by the reaction:

15735.6J + 58601.1J = 74336.7J

Answer:

Theories

Explanation:

It is theories because it was a generalistee abstract or thinking generalising the principle of fact about Earth tectonic plates ,it was formulated and concluded as plate tectonic theories after many findings. The theories conclude that the Earth has an outer layer called lithosphere and lies overly a plastic layer called asthenosphere. The lithosphere is divided into several plates and they move close to each other where they diverge, converge or slip over one another.

Answer:

mixture

Explanation:

Kool-Aid  is a mixture of sugar, water, dye, and flavoring.