Stomach acid consists mainly of what substance dissolved in water? a. на b. нBr c. HC2H302 d. H2504 e. NH3

Answers

Answer 1

Therefore, the correct option is (b) HCl.

Stomach acid, also known as gastric acid, consists mainly of Hydrochloric acid (HCl) dissolved in water.

Hydrochloric acid (HCl) is a strong acid that is naturally produced by the cells lining the stomach. It plays an important role in the digestive process by breaking down food and killing harmful bacteria that may have been ingested. HCl also helps to activate the enzymes that break down proteins, carbohydrates, and fats in the stomach.

The concentration of HCl in stomach acid can vary depending on factors such as the type of food consumed and the individual's health. In healthy individuals, the concentration of HCl in stomach acid can range from about 0.5% to 1.5%.

When the stomach produces too much HCl or the lining of the stomach becomes damaged, it can lead to conditions such as acid reflux, ulcers, and gastritis. These conditions can cause discomfort and pain, and may require medical treatment to manage.

In summary, stomach acid consists mainly of hydrochloric acid (HCl) dissolved in water, and plays an important role in the digestive process.

To know more about acid refer here

https://brainly.com/question/17711169#

#SPJ11


Related Questions

The feed gas to a methanol synthesis reactor is composed of 75-mol-% H2, 15-mol-% CO, 5-mol-% CO2, and 5-mol-% N2. The system comes to equilibrium at 550 K and 100 bar with respect to the following reactions: 2H2(g) + CO(g) → CH2OH(g) H2(8) + CO2(8) - CO(g) + H2O(8) Assuming ideal gases, determine the composition of the equilibrium mixture.

Answers

To solve this problem, we need to use the equilibrium constant expression for each reaction and the reaction stoichiometry. The equilibrium constant expression for each reaction is given by:

Kp1 = pCH2OH / (pH2)²(pCO)

Kp2 = pH2O / (pCO)(pH2)

where p is the partial pressure of each component in the equilibrium mixture. The stoichiometry of the first reaction is

2H2(g) + CO(g) → CH2OH(g)

which means that for every mole of CH2OH that is formed, 2 moles of H2 and 1 mole of CO are consumed. The stoichiometry of the second reaction is

H2(g) + CO2(g) → CO(g) + H2O(g)

which means that for every mole of CO that is consumed, 1 mole of H2O and 1 mole of H2 are formed.

We can start by calculating the partial pressures of each component in the equilibrium mixture using the given mole fractions and the total pressure:

PH2 = 0.75 × 100 bar = 75 bar

PCO = 0.15 × 100 bar = 15 bar

PCO2 = 0.05 × 100 bar = 5 bar

PN2 = 0.05 × 100 bar = 5 bar

Next, we can use the equilibrium constant expressions and the stoichiometry to set up a system of equations to solve for the partial pressures of each component in the equilibrium mixture. Let x be the partial pressure of CH2OH in bar.

For the first reaction:

Kp1 = pCH2OH / (pH2)²(pCO)

Kp1 = x / (75 bar)²(15 bar)

Kp1 = x / 84450 bar³

For the second reaction:

Kp2 = pH2O / (pCO)(pH2)

Kp2 = (2x) / (15 bar)(75 bar)

Kp2 = (2x) / 1125 bar²

At equilibrium, the rate of the forward reaction of each equation is equal to the rate of the reverse reaction. Therefore, the number of moles of CH2OH formed in the first reaction must be equal to the number of moles of CO consumed in the second reaction:

n(CH2OH) = 2n(CO)

where n is the number of moles of each component in the equilibrium mixture. Using the mole fractions and the total pressure, we can express the number of moles of each component in terms of x:

n(H2) = 0.75 × 100 bar / RT = 0.75 × 100000 / (8.314 × 550) mol

n(CO) = 0.15 × 100 bar / RT = 0.15 × 100000 / (8.314 × 550) mol

n(CO2) = 0.05 × 100 bar / RT = 0.05 × 100000 / (8.314 × 550) mol

n(N2) = 0.05 × 100 bar / RT = 0.05 × 100000 / (8.314 × 550) mol

n(CH2OH) = x / RT = x / (8.314 × 550) mol

n(H2O) = 2n(CO) = 2(0.15 × 100000 / (8.314 × 550)) mol

Now we can use the stoichiometry to express all the mole amounts in terms of n(CH2OH)

To know more about equilibrium constant refer here

brainly.com/question/28559466#

#SPJ11

For the reaction VCI2+CI2 -> VCI5 what are the reactants, products, and correct coefficients in the balanced equation

Answers

It is important to note that the balanced equation for a chemical reaction must include all of the reactants and products, as well as the coefficients that indicate the relative amounts of each substance involved in the reaction.

This ensures that the reaction is fully balanced, meaning that the number of atoms of each element on both sides of the equation is the same.  

The reaction [tex]VCI_2 + CI_2 - > VCI_5[/tex] is a chemical reaction between vinyl chloride (VCI) and chlorine ([tex]CI_2[/tex]) to form vinyl chloride monomer ([tex]VCI_5[/tex]). The reactants in this reaction are vinyl chloride and chlorine, while the product is vinyl chloride monomer.

The balanced equation for this reaction is:

[tex]VCI_2 + CI_2 - > VCI_5[/tex]

In this equation, the coefficients in front of the reactants and products indicate the relative amounts of each substance that are involved in the reaction. The coefficients are determined by the stoichiometric coefficients, which are the ratios of the coefficients of the reactants and products in the balanced equation.

Learn more about balanced equation visit: brainly.com/question/11904811

#SPJ4

acid and base characteristics substance a substance b substance c substance d sour taste bitter taste neutral taste sharp taste strongly conducts electricity. strongly conducts electricity. weakly conducts electricity. strongly conducts electricity. reacts with most metals to generate hydrogen gas. can react to make soap. can react with acids or bases. generally will not react. predict which substance would not act as an acid or a base according to bronsted-lowry's definition.

Answers

Substance C would not act as an acid or a base according to the Bronsted-Lowry definition.

In a chemical process, an acid contributes a proton (H+), whereas a base absorbs a proton, according to the Bronsted-Lowry definition. The tasteless substance C does not display the characteristics of an acid or a basic. It is unable to take part in Bronsted-Lowry acid-base reactions because it neither donates nor accepts protons.

According to the Bronsted-Lowry definition, substances A, B, and D can act as acids or bases if they have acidic or basic properties such a sour or bitter taste, are reactive with metals, or can react with other acids or bases. Thus, Substance C would not act as an acid or a base according to the Bronsted-Lowry definition.

To know more about Bronsted-Lowry definition here https://brainly.com/question/12377772

#SPJ4

While performing the formula of hydrate laboratory experiment, the lid accidentally slips over the crucible to completely seal the crucible. What effect this change will cause on your calculated experimental results?

Answers

When the lid accidentally slips over the crucible, completely sealing it during a hydrate laboratory experiment, it can have a significant impact on the calculated experimental results.

The sealing of the crucible by the lid prevents the escape of water vapor during the heating process. As a result, the measured mass loss during heating will not accurately represent the water content in the hydrate. The trapped water vapor inside the crucible will increase the total mass, leading to an overestimation of the water content in the final calculation. This can result in a higher experimental value for the water of hydration compared to the actual value.

Additionally, the presence of the lid can affect the equilibrium conditions during heating. The sealed environment may hinder the release of water vapor, which can affect the kinetics of the dehydration reaction. This can lead to incomplete dehydration and further contribute to inaccurate results.

Therefore, the accidental sealing of the crucible by the lid will introduce errors in the experimental measurements and calculations, leading to an overestimation of the water content in the hydrate sample.

Learn more about kinetics, below:

brainly.com/question/29049197

#SPJ11

Which of the given relationships correctly compares the rates of the reactants and products for the reaction below! 2 NOCHg) - 2 NO(g) + Cl2(g) 02-2A[NOC] _ 24[NO] A[a] on 4 Noa) - NJ ala] Oc_A/NoC) - ANO], [C] 04 Anod) { ANO] 9f02] 0-A[Noa) Ano] A[cat]

Answers

The given reaction is: 2 NOCl(g) → 2 NO(g) + Cl2(g)

To compare the rates of the reactants and products, we can look at the stoichiometric coefficients in the balanced equation.

According to the stoichiometry of the reaction, for every 2 moles of NOCl consumed, 2 moles of NO are produced, and 1 mole of Cl2 is produced.

Based on this information, the correct relationship that compares the rates of the reactants and products is:

A. [NOCl] / Δt = -2 [NO] / Δt = -1/2 [Cl2] / Δt

This relationship indicates that the rate of disappearance of NOCl is

twice the rate of appearance of NO and half the rate of appearance of Cl2.

Therefore, the correct option is A.

To know more about 2 NOCl(g) → 2 NO(g) + Cl2(g) refer here

https://brainly.com/question/30461140#

#SPJ11

a 4.70 ml sample of an h3po4 solution of unknown concentration is titrated with a 1.050×10−2 mnaoh solution. a volume of 7.32 ml of the naoh solution was required to reach the equivalence point.

Answers

From the given information, a 4.70 ml sample of an H3PO4 solution of unknown concentration is titrated with a 1.050×10−2 M NaOH solution. It is stated that a volume of 7.32 ml of the NaOH solution was required to reach the equivalence point.

In a titration, the equivalence point is reached when the moles of the acid and the moles of the base are stoichiometrically balanced. From the volume of NaOH solution required to reach the equivalence point (7.32 ml) and the known concentration of the NaOH solution (1.050×10−2 M), the number of moles of NaOH can be calculated.

Next, using the balanced equation for the reaction between H3PO4 and NaOH, the stoichiometry can be determined. If we assume a 1:1 ratio between H3PO4 and NaOH, the number of moles of H3PO4 in the initial 4.70 ml sample can be calculated.

Finally, with the moles of H3PO4 and the volume of the sample, the concentration of the H3PO4 solution can be determined.

Note: Since the balanced equation for the reaction between H3PO4 and NaOH is not provided, the exact calculation cannot be performed without additional information.

learn more about equivalent point here; brainly.com/question/31671460

#SPJ11

understand the origin of stability of the benzyl group. (benzyl carbanion, benzyl radical, benzylcation), e.g. can you rank order cations of varying stability?

Answers

When considering the stability of benzyl carbanions, radicals, and cations, the resonance effect also plays a significant role. Benzyl carbanions are relatively stable due to the delocalization of the negative charge across the phenyl ring, whereas benzyl radicals are more unstable due to the lack of electron density on the adjacent carbon atom.
The benzyl group, which consists of a phenyl ring attached to a methylene group (-CH2-), is generally considered to be a stabilizing group due to the resonance effect. This effect results in the delocalization of electrons from the lone pair on the adjacent carbon atom to the aromatic ring, making it less reactive towards nucleophiles.

In terms of benzylcation, the stability of the cation is highly dependent on the nature of the substituents on the phenyl ring. For example, a benzylcation with electron-donating substituents on the phenyl ring would be more stable than one with electron-withdrawing substituents.
In terms of ranking benzyl cations of varying stability, those with electron-donating substituents would be the most stable, followed by those with no substituents, and then those with electron-withdrawing substituents. However, it is important to note that this ranking can vary depending on the specific substituents and reaction conditions.

Overall, the stability of the benzyl group and its derivatives can be attributed to the resonance effect, but the specific stability of benzyl carbanions, radicals, and cations depends on the electronic nature of the substituents and the reaction conditions.

To know more about benzyl carbanions visit:

https://brainly.com/question/31040880

#SPJ11

how many grams of potassium chlorate decompose to potassium chloride and 725 ml of o2 at 128c and 780 torr ? round your answer to significant figures.

Answers

Approximately 2.25 grams of potassium chlorate decomposed to produce 725 mL of oxygen gas at 128°C and 780 torr.

To solve this problem, we will use the following balanced chemical equation for the decomposition of potassium chlorate:

2KClO₃(s) → 2KCl(s) + 3O₂(g)

From this equation, we can see that for every 2 moles of potassium chlorate that decompose, we get 3 moles of oxygen gas. We can use the ideal gas law to calculate the number of moles of oxygen gas produced, given the volume, temperature, and pressure:

PV = nRT

where P = 780 torr, V = 725 mL = 0.725 L, T = 128°C + 273.15 = 401.15 K, R = 0.0821 L·atm/(mol·K). Converting torr to atm, we have:

P = 780 torr × 1 atm/760 torr = 1.026 atm

Substituting these values into the ideal gas law and solving for n, we get:

n = PV/RT = (1.026 atm)(0.725 L)/(0.0821 L·atm/(mol·K))(401.15 K) ≈ 0.0276 mol O2

Since we know that 2 moles of potassium chlorate decompose for every 3 moles of oxygen gas produced, we can set up a proportion to find the number of moles of potassium chlorate that decomposed:

2 mol KClO₃/3 mol O₂ = x mol KClO₃0.0276 mol O₂

Solving for x, we get:

x = (2 mol KClO₃/3 mol O₂)(0.0276 mol O₂) ≈ 0.0184 mol KClO₃

Finally, we can convert the number of moles of potassium chlorate to grams using its molar mass:

m = nM

where n = 0.0184 mol and M = 122.55 g/mol (the molar mass of KClO3). Substituting these values, we get:

m = (0.0184 mol)(122.55 g/mol) ≈ 2.25 g

Learn more about potassium chlorate: https://brainly.com/question/31213535

#SPJ11

when a supersaturated solution of sodium acetate ha aodium cetate crystal dropped into the soloution. True or False.

Answers

True. When a supersaturated solution of sodium acetate has a sodium acetate crystal dropped into it, the excess sodium acetate particles will crystallize onto the existing crystal, causing it to grow.

This process is called nucleation and it occurs because the addition of the crystal provides a surface for the excess particles to attach to and form a solid structure. As the crystal grows, it will continue to absorb excess particles until the solution reaches equilibrium and no more sodium acetate can dissolve. This process is commonly used in chemistry to create large, pure crystals from supersaturated solutions.

Your question appears to be asking about the behavior of a supersaturated solution of sodium acetate when a sodium acetate crystal is dropped into it.

True: When a sodium acetate crystal is dropped into a supersaturated solution of sodium acetate, it acts as a seed crystal and triggers rapid crystallization. This process releases heat, making it an exothermic reaction. Supersaturated solutions are unstable, and the addition of a seed crystal helps the excess solute precipitate out, returning the solution to a saturated state.

To know about equilibrium:

https://brainly.com/question/30694482

#SPJ11

which molecule below has a significant band in the ir at 2220 cm-1 (medium)

Answers

acetylene is the answer. This functional group is commonly found in alkynes, such as acetylene (C2H2), which has a strong peak at 2220 cm-1 in its IR spectrum.

The IR spectrum of a molecule is unique and can be used to identify its functional groups. A significant band at 2220 cm-1 (medium) in the IR spectrum suggests the presence of a carbon-carbon triple bond (C≡C).  Other molecules that may exhibit a similar band include some nitriles and isocyanides. However, without more information about the specific molecules you are considering.

to know more about IR spectrum visit:

https://brainly.com/question/29794652

#SPJ11



1. Compare and contrast alpha decay, beta decay, and gamma emission in terms of the particles

involved and the changes they undergo.

Answers

In alpha decay, the core loses two protons. In beta decay, the core either loses a proton or gains a proton.

In gamma decay, no adjustment of proton number happens, so the particle doesn't turn into an alternate component. Chemical reactions take place in radioactive decay.

What are alpha particles beta particles and gamma decay?

The three fundamental forces in the nucleus—the "strong" force, the "weak" force, and the "electromagnetic" force—are the causes of alpha, beta, and gamma decay. In every one of the three cases, the outflow of radiation expands the core soundness, by changing its proton/neutron proportion.

What similarities and differences exist between beta decay and alpha decay?

The release of a helium nucleus, which consists of two protons and two neutrons, is known as alpha decay. The atomic number and total mass are both reduced by 2 as a result. A neutron decay into a proton, which gives off an electron, is known as beta decay. The atomic number is increased by one while the mass remains unchanged.

Learn more about Alpha decay:

brainly.com/question/17145324

#SPJ4

What is observed when an iron bar is
dipped into a solution:
a) of silver nitrate
b) of copper (II) sulfate
c) of aluminium chloride. ​

Answers

The correct option is C,  when an iron bar is dipped into a solution of aluminum chloride ([tex]AlCl_3[/tex]), no significant reaction occurs.

An iron bar is a long, slender piece of metal made primarily from iron. It is typically solid and cylindrical in shape, characterized by its strength and durability. Iron bars are widely used in various industries and applications due to their excellent mechanical properties. They are commonly employed in construction, manufacturing, engineering, and even in household items.

Iron bars are known for their high tensile strength, making them suitable for bearing heavy loads and providing structural support. They are often used as reinforcement in concrete structures, such as bridges and buildings, to enhance their stability and resilience. Iron bars can also be found in the manufacturing of machinery, tools, and equipment where strength and rigidity are essential. They serve as a key component in the fabrication of beams, frames, shafts, and other structural elements.

To know more about Iron Bar refer to-

brainly.com/question/14924092

#SPJ4

the neurotic trend horney called moving toward other people produces the

Answers

The neurotic trend horney called moving toward other people produces the compliant personality

What does Horney have to say about approaching people?

The three distinct neurotic patterns identified by Karen Horney's interpersonal theory of adjustment are compliant (moving towards people), aggressive (moving against people), and detached (moving away from people).

Horney defines "neurotic trends" as perspectives on life that give a sense of peace and protection during times of uncertainty and pain but that eventually stifle growth.

The compliant personality type according to Karen Horney is very relational, acts altruistically, but may also have a tendency to degrade oneself in order to keep a relationship going. This personality type is also referred to as self-effacing or moving towards people.

To learn more about neurotic trends :

https://brainly.com/question/28206107

#SPJ4

A.How many amperes are required to deposit 0.108 grams of zinc metal in 728 seconds, from a solution that contains Zn2+ ions .
___________A
B How many seconds are required to deposit 0.254 grams of zinc metal from a solution that contains Zn2+ ions, if a current of 0.664 A is applied.
_________s
C. How many seconds are required to deposit 0.218 grams of manganese metal from a solution that contains Mn2+ ions, if a current of0.809 A is applied.
______________ s

Answers

A)Approximately 0.434 amperes are required to deposit 0.108 grams of zinc metal in 728 seconds.

B)Approximately 1132 seconds are required to deposit 0.254 grams of zinc metal with a current of 0.664 A.

C)Approximately 950 seconds are required to deposit 0.218 grams of manganese metal with a current of 0.809 A.

What is Faraday's law?

The relationship between the amount of material (in moles) deposited or released at an electrode during an electrolytic reaction and the amount of electricity (in coulombs) transmitted through the electrolyte is described by Faraday's laws of electrolysis. These rules are the cornerstones of electrochemistry and were developed by the English scientist Michael Faraday in the 19th century.

We can use Faraday's equations of electrolysis to calculate how many amperes or how long it will take to deposit a specific amount of metal from an electrolytic solution. The amount of material deposited or released at an electrode is directly proportional to the amount of electricity carried through the electrolyte, according to Faraday's laws.

We must know the molar mass of the metal being deposited and the Faraday's constant, which is 96,485 C/mol, in order to perform the calculations.

A. To figure out how many amps are necessary to deposit 0.108 grammes of zinc metal in 728 seconds:

First, using the molar mass of zinc, which is 65.38 g/mol, we must determine how many moles of zinc there are.

Zn moles are equal to 0.108 g / 65.38 g/mol, or 0.00165 mol.

According to Faraday's rule, 2 moles of electrons are needed to reduce 1 mole of Zn2+ ions into zinc metal.

Therefore, 0.00165 mol of Zn2+ ions must be reduced with a total charge of [tex]2 * (0.00165 mol) * (96,485 C/mol) = 316.04 C.[/tex]

Now, we can use the equation to determine the current (amperes):

Total charge (C) divided by time (s) is 316.04 C/728 s, or 0.434 A, for current.

Therefore, to deposit 0.108 grammes of zinc metal in 728 seconds, approximately 0.434 amperes are needed.

B. To figure out how long it will take to deposit 0.254 grammes of zinc metal with a 0.664-amp current A:

First, determine the zinc's molecular weight:

Zn moles are equal to 0.254 g / 65.38 g/mol, or 0.00388 mol.

Once more, considering that every mole of Zn2+ ions needs two moles of electrons:

Total charge equals [tex]750.94 C (2 * 0.00388 mol * 96,485 C/mol)[/tex]

We rewrite the equation to obtain the time (seconds):

Time is calculated as [tex]Time (s) = Total charge (C) / Current (A) = 750.94 C / 0.664 A = 1132 s.[/tex]

In order to deposit 0.254 grammes of zinc metal at a current of 0.664 A, it takes roughly 1132 seconds.

To calculate the time needed to deposit 0.218 grammes of manganese metal with a 0.809-amp current, choose option C. A:

First, determine the manganese molecular weight:

Mn's molar mass is equal to 0.218 grammes per mole.

Manganese (Mn) has a molar mass of roughly 54.94 g/mol.

Mn moles are equal to 0.218 g / 54.94 g/mol, or 0.00397 mol.

Since two moles of electrons are needed for every mole of Mn2+ ions:

Total charge is equal to [tex]2 * 0.00397 mol * 96,485 C/mol, or 768.47 C.[/tex]

We rewrite the equation to obtain the time (seconds):

Time is calculated as [tex]Time (s) = Total charge (C) / Current (A) = 768.47 C / 0.809 A =950 s[/tex]

In order to deposit 0.218 grammes of manganese metal with a current of 0.809 A, it takes roughly 950 seconds.

Learn more about Faraday's law:

https://brainly.in/question/16354004

#SPJ4

which of the following is not a nucleophile? 5) a) ch3och3 b) febr3 c) br d) e) nh3 2

Answers

A nucleophile is a chemical species that donates a pair of electrons to form a chemical bond. It is typically an electron-rich species that seeks to react with electron-deficient species, such as electrophiles.

Let's analyze each option to determine which one is not a nucleophile:

a) CH3OCH3 (dimethyl ether): This compound contains an oxygen atom with two lone pairs of electrons. Oxygen is electronegative and can donate its lone pairs, making it a nucleophile.

b) FeBr3 (iron(III) bromide): Iron(III) bromide is not a nucleophile. It is an ionic compound consisting of Fe3+ cations and Br- anions. The Fe3+ cations do not possess any lone pairs of electrons and cannot act as nucleophiles.

c) Br (bromine): Bromine, as an atom, does not possess any lone pairs of electrons. Therefore, it cannot act as a nucleophile.

d) NH3 (ammonia): Ammonia is a nucleophile. It contains a central nitrogen atom with a lone pair of electrons, which it can donate to form a chemical bond.

e) 2: It seems that option (e) is incomplete or incorrectly written, as it lacks information to determine whether it is a nucleophile or not.

To summarize, among the given options, the one that is not a nucleophile is (b) FeBr3.

To know more about nucleophile refer here

https://brainly.com/question/10702424#

#SPJ11

how many moles of h c l are in 47.3 ml of a 1.65 m h c l solution? type answer:

Answers

There are 0.0778 moles of HCl in 47.3 ml of a 1.65 M HCl solution.

To determine the number of moles of HCl in the solution, we can use the formula:

moles = concentration (molarity) × volume (in liters)

First, we need to convert the given volume from milliliters to liters:

47.3 ml = 47.3/1000 = 0.0473 L

Now we can calculate the number of moles:

moles = 1.65 M × 0.0473 L = 0.0778 moles

Know more about moles of HCl here:

https://brainly.com/question/30233723

#SPJ11

Which of the following is the best method to make a racemic mixture of 2,3-dibromobutane (CH,CHBECHBECH,). A. photochemical bromination of 2-bromobutane B. addition of HBr to 3-bromo-2-butene (CH,CH-CBCH) C. addition of Br to cis-2-butene (cis-CH,CH-CHCH.) D. addition of Br, to trans-2-butene (trans-CH,CHCHCH)

Answers

The correct answer is D. addition of Br₂ to trans-2-butene (trans-CH₃CH=CHCH₃).

To form a racemic mixture, the starting compound should be an asymmetric molecule or a compound with an asymmetric center. In this case, 2,3-dibromobutane (CH₃CHBrCHBrCH₃) is an asymmetric molecule because it has two different bromine atoms attached to the central carbon.

The addition of bromine (Br₂) to trans-2-butene will result in the formation of 2,3-dibromobutane. Since trans-2-butene is an asymmetric starting material, the addition of bromine from both sides of the double bond will give rise to both possible enantiomers, leading to a racemic mixture.

Option A (photochemical bromination of 2-bromobutane) and option B (addition of HBr to 3-bromo-2-butene) do not involve an asymmetric starting material, so they won't result in a racemic mixture.

Option C (addition of Br₂ to cis-2-butene) also won't give a racemic mixture because cis-2-butene does not have an asymmetric carbon.

Therefore, the best method to make a racemic mixture of 2,3-dibromobutane is option D, the addtion of Br₂ to trans-2-butene.


Learn more about trans-2-butene here:

https://brainly.com/question/31498483

#SPJ11

calculate δs∘rxn for the balanced chemical equation: 2h2s(g) 3o2(g)→2h2o(g) 2so2(g) substance and state s∘[j/(k⋅mol)] h2o(g) 188.8 o2(g) 205 h2s(g) 205.7 so2(g) 248.1

Answers

The standard entropy change (ΔS⦵rxn) for the given chemical equation is -152.6 J/(K⋅mol).

To calculate the standard entropy change (ΔS⦵rxn) for the given balanced chemical equation, we need to determine the difference in entropy between the products and the reactants.

The equation given is: 2H₂S(g) + 3O₂(g) → 2H₂O(g) + 2SO₂(g)

The standard entropy values (S⦵) for the substances involved are as follows:

H₂S(g): 205.7 J/(K⋅mol)

O₂(g): 205 J/(K⋅mol)

H₂O(g): 188.8 J/(K⋅mol)

SO₂(g): 248.1 J/(K⋅mol)

Now, we can calculate ΔS⦵rxn using the following formula:

ΔS⦵rxn = Σn(S⦵ products) - Σm(S⦵ reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively.

ΔS⦵rxn = 2(S⦵ H₂O) + 2(S⦵ SO₂) - 2(S⦵ H₂S) - 3(S⦵ O₂)

       = 2(188.8) + 2(248.1) - 2(205.7) - 3(205)

       = 377.6 + 496.2 - 411.4 - 615

       = -152.6 J/(K⋅mol)

Therefore, the standard entropy change (ΔS⦵rxn) for the given chemical equation is -152.6 J/(K⋅mol).

To know more entropy about  refer here

brainly.com/question/31641539#

#SPJ11

which conformer is at a local energy minimum on the potential energy diagram in the chair-chair interconversion of cyclohexane?

Answers

In the chair-chair interconversion of cyclohexane, the conformer that is at a local energy minimum on the potential energy diagram is the chair conformation itself.

Cyclohexane can exist in two chair conformations, often referred to as the "chair" and the "boat" conformations. The chair conformation is the more stable and lower-energy form compared to the boat conformation.

On the potential energy diagram, the chair conformation will be located at a local energy minimum. This is because the chair conformation has all carbon-carbon bonds in the cyclohexane ring in their optimal positions, resulting in minimal strain and maximum stability.

The boat conformation, on the other hand, is a higher-energy conformation due to increased torsional strain and steric hindrance between the hydrogen atoms. It is typically located at a higher energy level on the potential energy diagram, representing a local energy maximum.

Overall, in the chair-chair interconversion of cyclohexane, the chair conformation is the most stable and energetically favored, representing a local energy minimum on the potential energy diagram.

Learn more about cyclohexane here:

https://brainly.com/question/17019157

#SPJ11

What volume of O2 at 798 mmHg and 33 ∘C is required to synthesize 17.5 mol of NO? Express your answer to three significant figures and include the appropriate units.

Answers

The volume of O2 required to synthesize 17.5 mol of NO at 798 mmHg and 33 °C is approximately 446.96 liters.

To determine the volume of O2 required to synthesize 17.5 mol of NO, we can use the ideal gas law equation:

PV = nRT

Where:

P = pressure, V = volume, n = moles, R = ideal gas constant, T = temperature.

First, we need to convert the given pressure to the appropriate units. 798 mmHg can be converted to atm by dividing by 760 mmHg/atm:

P = 798 mmHg / 760 mmHg/atm = 1.050 atm

Next, we need to convert the temperature from Celsius to Kelvin by adding 273.15:

T = 33 °C + 273.15 = 306.15 K

Now we can rearrange the ideal gas law equation to solve for volume:

V = (nRT) / P

V = (17.5 mol * 0.0821 L·atm/mol·K * 306.15 K) / 1.050 atm

V ≈ 446.96 L

Therefore, the volume of O2 required to synthesize 17.5 mol of NO at 798 mmHg and 33 °C is approximately 446.96 liters.

Learn more about ideal gas law here:

https://brainly.com/question/16561470

#SPJ11

at 298.15 k, the nernst equation can be rewritten to show that the nonstandard cell potential is equal to the standard cell potential minus: select the correct answer below: (0.0257 vn)lnq

Answers

The nonstandard cell potential is equal to the standard cell potential minus (0.0257 V/n) lnQ, where n is the number of electrons transferred in the reaction.

The Nernst equation allows us to calculate the nonstandard cell potential (Ecell) for an electrochemical cell at a given temperature (298.15 K) and under nonstandard conditions.

It relates the cell potential to the standard cell potential (E°cell) and the reaction quotient (Q), which is the ratio of concentrations of products to reactants.

The Nernst equation is given as:

Ecell = E°cell - (RT/nF) * lnQ

Where:

Ecell is the nonstandard cell potential

E°cell is the standard cell potential

R is the gas constant (8.314 J/(mol·K))

T is the temperature in Kelvin

n is the number of electrons transferred in the balanced cell reaction

F is Faraday's constant (96485 C/mol)

ln is the natural logarithm

Q is the reaction quotient

At 298.15 K, the term (RT/nF) equals 0.0257 V, which is obtained by substituting the appropriate values into the equation.

Therefore, the correct answer is:

The nonstandard cell potential is equal to the standard cell potential minus (0.0257 V/n) lnQ, where n is the number of electrons transferred in the reaction.

To know more about potential refer here

brainly.com/question/15570309#

#SPJ11

For some medical procedures, doctors cool the patient's body before beginning. Following the procedure, doctors warm the patient back to normal temperature.

Based on what you learned about reaction rates this unit, explain what purpose changing the temperature of the patient's body serves.

Answers

Changing the temperature of the patient's body affects the reaction rates of the chemical processes occurring in the body. Cooling the body slows down the metabolic processes, which can help to reduce the body's oxygen demand and protect the organs from damage during the medical procedure. Warming the body back to normal temperature after the procedure helps to restore the normal metabolic processes and ensure that the body is functioning properly. By controlling the temperature, doctors can help to optimize the reaction rates and minimize the risk of complications during and after the procedure.

Balance the following redox reaction if it occurs in acidic solution. What are the coefficients in front of Fe and H+ in the balanced reaction? Fe2+(aq) + NH4+(aq) → Fe(s) + NO3-(aq)

Answers

To balance the redox reaction, we need to assign oxidation numbers to each element and then balance the atoms and charges on both sides of the equation.

Let's assign oxidation numbers:

Fe2+(aq) + NH4+(aq) → Fe(s) + NO3-(aq)

Oxidation numbers:

Fe2+(aq): +2

NH4+(aq): +1

Fe(s): 0

NO3-(aq): -1

In the given reaction, Fe2+ is being reduced to Fe, and NH4+ is being oxidized to NO3-.

To balance the reaction, follow these steps:

1. Balance the atoms:

Fe2+(aq) + NH4+(aq) → Fe(s) + NO3-(aq)

There is one Fe on the left side and one Fe on the right side, so the Fe atoms are balanced.

There is one N on the left side and one N on the right side, so the N atoms are balanced.

There are four H atoms on the left side and none on the right side, so we need to add four H+ on the right side.

Fe2+(aq) + NH4+(aq) → Fe(s) + NO3-(aq) + 4H+(aq)

2. Balance the charges:

The total charge on the left side is +2 (from Fe2+) and +1 (from NH4+), totaling +3.

The total charge on the right side is 0 (from Fe(s)) and -1 (from NO3-) and +4 (from 4H+), totaling +3.

Fe2+(aq) + NH4+(aq) → Fe(s) + NO3-(aq) + 4H+(aq)

Therefore, the balanced redox reaction in acidic solution is:

Fe2+(aq) + NH4+(aq) → Fe(s) + NO3-(aq) + 4H+(aq)

The coefficient in front of Fe is 1, and the coefficient in front of H+ is 4.

To know more about  redox reaction refer here

brainly.com/question/13978139#

#SPJ11

4. Picture rain falling on the very northern tip of the watershed in the Francis Marion National Forest.
Follow the path of one of these raindrops all the way to the Atlantic Ocean.
______ → _______ →The "Tee" which connects the East and West Branches of the Cooper River → _____ →_______ → Atlantic Ocean

Answers

The path of the raindrops moves from the drops through a tiny river/creek all the way to the Atlantic.

What is the path?

Raindrop Runs off the surface and into a tiny stream or creek--->  Flows downstream and joins larger tributaries ----> Flows downstream and continues to merge with other streams and rivers  reaches the "Tee" where the Cooper River's East and West Branches meet ---->  continues to follow the Cooper River downstream  where the river joins the ocean, enters the estuary flows with the tides and currents, heading for the coast ----> reaches the Atlantic Ocean at last.

Hence, The exact path and specific waterways may vary depending on the topography, drainage patterns, and specific geography of the Francis Marion National Forest and the Cooper River watershed.

Learn more about Atlantic:https://brainly.com/question/31251342

#SPJ1

a 500.0g sample of an aqueous hydrogen peroxide contains 31.50 hydrogen peroxide by mass find the mass of hydrogen peroxide in the solution find the mass of water in the solution

Answers

Answer:

mass of hydrogen peroxide = 31.50% × 500.0 g = 157.5 g

To find the mass of water in the solution, we can subtract the mass of hydrogen peroxide from the total mass of the sample:

mass of water = total mass of sample - mass of hydrogen peroxide

mass of water = 500.0 g - 157.5 g

mass of water = 342.5 g

Therefore, the mass of hydrogen peroxide in the solution is 157.5 g, and the mass of water in the solution is 342.5 g.

if we add acid to a buffer containing nach3ch2coo and ch3ch2cooh, the acid will react with which of the following? select the correct answer below: nach3ch2coo ch3ch2cooh na no reaction will occur.

Answers

A buffer is a substance that can withstand a pH change when acidic or basic substances are added.

Thus, Small additions of acid or base can be neutralized by it, keeping the pH of the solution largely constant. For procedures and/or reactions that call for particular and stable pH ranges, this is significant.

The pH range and capacity of buffer solutions determine how much acid or base can be neutralized before pH changes and how much pH will vary.

Due to the fact that most biological reactions and enzymes require very particular pH ranges in order to function effectively, buffer solutions are crucial in biology and medicine.

Thus, A buffer is a substance that can withstand a pH change when acidic or basic substances are added.

Learn more about Buffer, refer to the link:

https://brainly.com/question/31847096

#SPJ1

where can a chemicals sds be found select all that apply

Answers

A. Manufacturer's website, B. Chemical supplier or distributor, C. Occupational safety and health administration (OSHA) website, D. Chemical regulatory agencies' websites, E. Workplace safety portals or intranets, F. Online SDS databases, G. Physical copies provided by the manufacturer or supplier.

Manufacturers often provide the SDS for their products on their websites. Chemical suppliers or distributors may also have the SDS available for download or request. Government organizations such as OSHA and chemical regulatory agencies often maintain databases of SDSs that can be accessed online. Workplace safety portals or intranets may provide access to SDSs for employees. Additionally, there are online SDS databases that compile and provide access to a wide range of SDSs. Lastly, physical copies of SDSs may be provided by the manufacturer or supplier, either upon request or included with the shipment of the chemical. In summary, an SDS for a chemical can be found on the manufacturer's website, the website of a chemical supplier or distributor, OSHA and chemical regulatory agencies' websites, workplace safety portals or intranets, online SDS databases, and physical copies provided by the manufacturer or supplier. These sources ensure easy access to crucial safety information regarding the handling and use of chemicals.

Learn more about intranets here: brainly.com/question/13139335

#SPJ11

how many grams of sodium hydroxide is in a 0.00670.0067 m solution that is added to neutralize 35.835.8 ml of a 0.00770.0077 m solution of sulfuric acid?

Answers

To find the mass of NaOH, we need to multiply the moles of NaOH by its molar mass (which is approximately 40.00 g/mol).

mass of NaOH = moles of NaOH × molar mass of NaOH

By substituting the values into the equations, we can calculate the mass of NaOH.

To determine the number of grams of sodium hydroxide (NaOH) in a given solution, we need to use the concentration (molarity) and volume information provided.

Given:

Volume of sulfuric acid solution (H2SO4) = 35.8 mL = 0.0358 L

Molarity of sulfuric acid solution (H2SO4) = 0.0077 M

We can use the stoichiometry of the neutralization reaction between NaOH and H2SO4 to calculate the amount of NaOH required to neutralize the given amount of H2SO4.

The balanced equation for the neutralization reaction is:

H2SO4 + 2NaOH → Na2SO4 + 2H2O

From the equation, we can see that 1 mole of H2SO4 reacts with 2 moles of NaOH.

Using the molarity and volume information of the H2SO4 solution, we can calculate the number of moles of H2SO4:

moles of H2SO4 = Molarity × Volume = 0.0077 M × 0.0358 L

Since the stoichiometry of the reaction is 1:2 (H2SO4:NaOH), the number of moles of NaOH required is twice the moles of H2SO4.

moles of NaOH = 2 × moles of H2SO4

Finally, to find the mass of NaOH, we need to multiply the moles of NaOH by its molar mass (which is approximately 40.00 g/mol).

mass of NaOH = moles of NaOH × molar mass of NaOH

By substituting the values into the equations, we can calculate the mass of NaOH.

Learn more about sodium hydroxide  here:

https://brainly.com/question/10073865

#SPJ11

when 0.755 grams of a protein were dissolved in 34.9 ml of solution at 17.9 degrees c, the osmotic pressure was found to be 0.069 atm. calculate the molar mass of the protein.

Answers

To calculate the molar mass of the protein, we can use the equation for osmotic pressure:π = (n/V)RT, where π is the osmotic pressure, n is the number of moles of solute (in this case, the protein), V is the volume of the solution in liters, R is the ideal gas constant (0.0821 L·atm/(mol·K)), and T is the temperature in Kelvin.

We need to convert the given values to the appropriate units.

Mass of protein = 0.755 grams

Volume of solution = 34.9 mL = 34.9 / 1000 L = 0.0349 L

Temperature = 17.9 degrees Celsius = 17.9 + 273.15 K = 291.05 K

Now, we can rearrange the osmotic pressure equation to solve for the number of moles of solute (n):

n = (πV) / (RT)

Plugging in the values:

n = (0.069 atm * 0.0349 L) / (0.0821 L·atm/(mol·K) * 291.05 K)

Simplifying the expression:

n ≈ 0.000858 mol

Finally, we can calculate the molar mass of the protein using the equation:

Molar mass = Mass of protein / Number of moles

Molar mass = 0.755 g / 0.000858 mol

Calculating this expression, we find:

Molar mass ≈ 880.8 g/mol

Therefore, the molar mass of the protein is approximately 880.8 g/mol.

Learn more about osmotic pressure here ;

https://brainly.com/question/29819107

#SPJ11

what do you think the term polyester fabric refers to

Answers

Polyester fabric refers to a type of synthetic textile material that is made from polyester fibers. Polyester is a polymer, which means it is made up of many repeating units of a single molecule. It is often blended with other fibers, such as cotton or rayon, to create fabrics that are durable, lightweight, and wrinkle-resistant.

Polyester fabric has a number of advantages over natural fibres, including resistance to stretching and shrinking, as well as resistance to wrinkles and creases. It is also relatively easy to care for, as it can usually be machine-washed and dried without any special treatment. Polyester fabric is commonly used in clothing, bedding, and home furnishings, as well as in industrial applications such as filter fabrics and insulation materials.

Learn more about Polyester fabric at https://brainly.com/question/16850410

#SPJ11

Other Questions
T/F:a healthcare provider should be queried when documentation is You have isolated a strain of bacteria which ferment glucose by phosphogluconate pathway and grow it anaerobically with radioactively labelled glucose on carbon -1 and 3. With structures and enzymes and coenzymes, illustrate the fate of the radio actively labelled carbons an individual animal modifying its behaviors as a consequence of previous individual experience provides an example of a. behavioral imprinting. b. learning. c. orienting. d. navigating. e. a fixed action pattern. massive stars explode soon after fusion to iron initiates because (e) the load and source resistance are unknown. design an rlc bandpass filter with -3 db freqs at 545 khz and 1605 khz. Roberto has been working for the same company for 20 years. Every March, he has a yearly review that decides the amount of money that will be included in his yearly bonus, and he makes sure he is working hard around that time.This scenario is an example of the schedule of reinforcement? (fixed interval, variable interval, fixed ratio, variable ratio) 161.Which of the following reflect behavioral aspects of test anxiety?a.excessive worrying, expecting to do poorly, and finding it hard to study in the first placeb.procrastination, avoiding studying, or deficient study skillsc.body tension, difficulty breathing, and sweaty palmsd.anger, depression, and frustration A single mineral may take on multiple crystalline lattice structures.A. True B. False Select the sentence that correctly describes the set of strings accepted by the FSM below:a. The FSM accepts a string x if and only if x contains at least one 0 and at least one 1.b.The FSM accepts a string x if and only if x starts with a 0 and ends with a 1.c.The FSM accepts a string x if and only if the number of 1's in x is odd and the number of 0's in x is odd.d.The FSM accepts a string x if and only if x contains the pattern 101 somewhere in the string. RIPEMD is a suite of cryptographic hash functions developed basing upon:a. SHAb. 3DESc. Blowfishd. MD5e. MD4 wireless audio-output connections typically use bluetooth technology. true or false? a more-primitive characteristic that appeared in common ancestors is called? under the minimax regret approach to decision making, evpi equals the expected regret that is associated with the minimax decision.T/F If the mass of the beam is ignored, the value of the unknown mass is most nearly equal to which of the following? a) 7.5 kg. b) 10 kg. c) 30 kg. d) 160 kg. true or false there are no consistent documented withdrawal symptoms from caffeine. in most systems analysis tasks, time and people are interchangeable. t/f what do you think the term polyester fabric refers to - why did you digest the plasmid with xhoi? what is your expectation if the plasmid is a reclosed vector without an insert? what is your expectation if your plasmid has an insert (how many bands, what are their sizes)? where one or more electric power production sources operate in parallel with a primary source of electricity, the multiple power sources shall be identified by means of . Given l m n, find the value of x.