Answer:
B. Arc blast
Explanation:
Arc blast are as a result of rapid injection of electrical energy into an arc. These shock waves and arc blast pressure wave at low level can lead to damage of eardrums at lower levels and cardiac arrest at high levels.
Strong magnetic fields created by high currents (> 100 kA) can result to equipment destruction. These arc blast hazards are mostly found in high-energy power circuits and large capacitor banks.
Light is one form of energy that travels in electromagnetic waves. This energy is both (1)
and
electrical. There are many different types of electromagnetic (EM) waves. Most of them cannot be seen by humans.
Our eyes see only a small (2)
of EM waves called visible light Visible light is made up of different colors
The colors are red, orange, yellow, green, blue, indigo, and violet. The colors are due to the different (3)
of
light. The (4)
the wavelength, the less energy the wave has. The shorter the wavelength, the more energy
it has. The (5) wavelength of visible light looks red to us the shortest (6)
of visible light looks
vlolet to us
Answer:
Explanation:
Electromagnetic waves are formed by the interference of both electric and magnetic fields. These include: Microwaves, Radio waves, Infrared, Visible, Ultraviolet, X-ray, and gamma rays. These waves can be arranged in a specific order (called spectrum) with respect to their wavelength or frequency. The higher the wavelength, the lower the frequency. And vice versa.
These waves are transverse, and travels at the same speed (speed of light - 3.0 x [tex]10^{8}[/tex] m/s).
In the given question, the answers are:
1 - Magnetic
2 - Region
3 - Refractive indices
4 - Greater
5 - Higher
6 - Wavelength
What happens to cause the tissue around a cut to become swollen, red, and
painful?
A. Fluid and white blood cells move into the tissue from nearby blood
vessels.
B. White blood cells burst and release wastes made by digesting
pathogens.
C. Lymph nodes develop in the tissue and begin trapping pathogens.
D. Chemical messengers released by the tissue cause nearby
muscles to contract and pull on bones.
SUBM
Answer:
The answer is A. Fluid and white blood cells move into the tissue from nearby blood vessels.
Explanation:
Answer:
A is the Answer
Explanation:
I took the test
Objects with different masses have the same gravitational force acting
on them.
TRUE
FALSE
It has been known for many years that ceramics can conduct electricity. In 2008, scientists found a ceramic material that can conduct electricity with no resistance at 133 K. What is the most important significance of this 2008 finding?
This is a lower temperature than Onnes’s experiment, and it will allow for a broader use of superconductors.
This is a higher temperature than Onnes’s experiment, and it will allow for a broader use of superconductors.
Materials that can conduct electricity with no resistance are new and can allow for new materials to be made.
Ceramic materials have been known to be able to conduct electricity prior to year 2008.
Answer:
mercury
Explanation:
edge 2020
the relationship between m2,cm2,mm2 and km2
Answer:
m2
Explanation:
I just knowyyysydyyyyyyyýdydysyydysysydydhdhhdhdhdhxhchxhhxhc
Answer:
Square Meters to Square Centimeters Conversion
1 Square meter (m2) is equal to 10000 square centimeters (cm2). ... For example, to convert 10 m2 to cm2, multiply 10 by 10000, that makes 100000 cm2 is 10 m2.
cm2↔mm2 1 cm2 = 100 mm2.
Calculate the total energy transferred when 200 g of ice cubes at 0°C are changed to steam at 100°C.
Specific heat capacity of water = 4200 J/kg °C
Specific latent heat of fusion = 340 kJ/kg
Specific latent heat of vaporisation = 2260 kJ/kg
Answer:
[tex]604000\ \text{J}[/tex]
Explanation:
m = Mass of ice = 200 g
[tex]\Delta T[/tex] = Temperature change of water = [tex](100-0)^{\circ}\text{C}[/tex]
c = Specific heat capacity of water = 4200 J/kg °C
[tex]L_f[/tex] = Specific latent heat of fusion = 340 kJ/kg
[tex]L_v[/tex] = Specific latent heat of vaporisation = 2260 kJ/kg
Heat required to convert ice to water = [tex]mL_f[/tex]
Heat required to raise the temperature of water to boiling point = [tex]mc\Delta T[/tex]
Heat required to convert water to steam = [tex]mL_v[/tex]
Total heat required
[tex]q=mL_f+mc\Delta T+mL_v\\\Rightarrow q=m(L_f+c\Delta T+L_v)\\\Rightarrow q=0.2(340\times 10^3+4200(100-0)+2260\times 10^3)\\\Rightarrow q=604000\ \text{J}[/tex]
Heat required to convert the given amount of ice to steam at the required temperature is [tex]604000\ \text{J}[/tex].
The moon Phobos orbits Mars
(mass = 6.42 x 1023 kg) at a distance
of 9.38 x 106 m. What is its period of
orbit?
Skip
|?]s
-nte
Answer:
The moon Phobos orbits Mars
(mass = 6.42 x 1023 kg) at a distance
of 9.38 x 106 m. What is its period of
orbit?
Explanation:
Answer: 27.9816 x 10^3 is the period of orbit
Given the distance between the crest of one wave and the crest of the next wave, you can determine the?
help pls physics problem
Answer:
0.4329 seconds
Explanation:
We are given;
Distance; d = 0.635 m
Velocity; v = 3.22 m/s
Angle; θ = 62.9°
To find the time, we have to find the horizontal component of the velocity.
Thus, Vx = 3.22 × cos 62.9
Formula for time is;
t = d/Vx
t = 0.635/(3.22 × cos 62.9)
t = 0.4329 sec
Thus the time he will take to clear the hurdle is 0.4329 sec
At night, within how many feet of approaching a vehicle from the rear must you dim your high beam headlights
Answer: 500 ft
Explanation:
High beam headlights help one to see better at night as the range of vision is greatly expanded. They can however, blind drivers coming on the opposite lane.
It is therefore prudent to ensure that when using high beam headlights, you dim them when a car is coming towards you. The appropriate distance to do so is a minimum of 500 ft from the car.
a car drives at a velocity of 12 [m/s] for 9 [s]. what distance does the car drive?
Answer:
The car drives 108 m
Name ten scalar quantity and explain them
Answer:
A scalar is a quantity that is fully described by a magnitude only. It is described by just a single number. Some examples of scalar quantities include speed, volume, mass, temperature, power, energy, and time.
Examples of scalar quantity are:
Distance.
Speed.
Mass.
Temperature.
Energy.
Work.
Volume.
Area.
Explanation:
please mark me as brainliest thank you
True or false? When a change of state starts to occur, the energy supplied changes the temperature but not the internal energy.
Answer:
True
Explanation:
This heat energy allows the change of state to happen, and the temperature remains constant during the process. The amount of energy required to change the state of a substance depends upon the mass and characteristics of that substance. The energy required to change the state of a material is known as the latent heat. During a change of phase the temperature does not change, but the internal energy does. The internal energy is the sum of the kinetic energy of the molecules and the chemical potential energy of the molecules.
A car’s brakes decelerate it at a rate of -1.70 m/s2. What is the time, in seconds, required to slow the car from 15 m/s to 9.0 m/s?
Answer:
t = 3.52 s
Explanation:
Given that,
The deceleration of a car is, a = -1.7 m/s²
The initial velocity of the car, u = 15 m/s
Final velocity of the car, v = 9 m/s
We need to find the time that is required to slow the car from 15 m/s to 9 m/s. The definition of acceleration is :
[tex]a=\dfrac{v-u}{t}\\\\t=\dfrac{v-u}{a}\\\\t=\dfrac{9-15}{-1.7}\\\\t=3.52\ s[/tex]
So, it will take 3.52 seconds to slow the car from 15 m/s to 9 m/s.
12. A rolling ball has 18 J of kinetic energy and is rolling 3.0 m/s. Find its mass.
Answer:
4g
I hope it will be useful.
Explanation:
KE = (1/2)*m*v^2
Which object has a net force of -68 N?
F = 31 N
F = 89 N
F, = 27 N
F=-53N
F = 53 N F-56N
F = 103 N
F = 34 N
F=-102 N
F = -27 N
F = -74 N
F=-89 N
Answer:third one from the left
Explanation:
The third object from the given problem has a net force of - 68 Newtons because there is no net vertical force action of this object as equal upward and downward forces cancel each other.
What is Newton's second law?Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change of momentum.
F = m*a
The net vertical force = 27 Newtons - 27 Newtons
= 0 Newtons
The net vertical force on the object would be zero.
The net horizontal force acting on the object = - 102 Newtons + 34 Newtons
= -68 Newtons
Hence we can conclude that the net force of - 68 Newton acting on the third object.
Learn more about Newton's second law here, refer to the link;
brainly.com/question/13447525
#SPJ5
Please help as soon as possible!! Please!
The north pole of one bar magnet is near the south pole of another bar
magnet. What happens to the magnets?
A. They twist away from each other.
B. They repel each other
C. They attract each other.
D. They neither attract nor repel each other.
Answer:
I think it could be C.
hope it helps!
a communication satellite is stationed in an orbit high abovr the earth. which of the follwoing will not be exhibeted by communication satellites.
a) rotational motion and periodic motion
b) periodic motion and circular motion
c) rotational motion and rectilinear motion
d) periodic motion and oscillatory motion
i) A and B
ii) B and C
iii) A only
iv) D only
Pls help
Answer:
i think ii)
B and c
i'm note sure though
Which of these materials is not magnetic?'
*
Cobalt
Iron
Copper
Stainless Steel
Answer:
stainless steel is the material which is non magnetic.
What are the units of Mass and Weight in the English System? Explain.
Answer:
I tried...
Explanation:
Assuming the English system of mass and weight is the same as the Imperial system, the measurements are:
• 1 pound (lb) = 16 ounces (oz)
• 2,000 pounds (lbs) = 1 ton (T)
I think that's everything?
In the English system, mass is measured in pounds and weight is also measured in pounds. However, it is important to understand the difference between mass and weight.
Mass is a measure of the amount of matter in an object and is a scalar quantity. It does not change with location or gravitational force. In the English system, mass is typically measured using a scale or balance, which compares the object's mass to a standard mass. The pound (lb.) is the unit of mass in the English system.
Weight, on the other hand, is a measure of the force exerted on an object due to gravity and is a vector quantity. It depends on the object's mass and the gravitational force acting on it. In the English system, weight is typically measured using a spring scale or a balance that incorporates a spring. The pound (lb.) is also used as the unit of weight in the English system.
Weight = Mass x Acceleration due to gravity
Mass is measured in pounds (lb.) and weight is also measured in pounds (lb.).It is important to note that weight can vary depending on the gravitational force acting on an object.
Learn more about weight here:
https://brainly.com/question/28221042
#SPJ2
write the chemical name and chemical formula for four hydrogens and two nitrogen
Answer:
2 moles of H2Nsuperscript(-) or NHsubscript2 , amide group!
I hope it will be useful.
Find the direction cosines of cartesian coordinates (3, -1, 2).
Explanation:
vgfbhhhhhjhbgvbhggy
give reason: the liquid pressure varies with the depth.
can I get the answer fast??
Answer:
This is due to an increase in hydrostatic pressure, the force per unit area exerted by a liquid on an object. The deeper you go under the sea, the greater the pressure of the water pushing down on you.
Uses of Photodiode.State the 8 uses of phototide...................
Answer:
Photodiodes are used in consumer electronics devices such as compact disc players, smoke detectors, medical devices and the receivers for infrared remote control devices used to control equipment from televisions to air conditioners. For many applications either photodiodes or photoconductors may be used.
When a capacitor, in RC circuit, is fully charged, the current through the resistor is Select one: zero if it is the only capacitor, but maximum if there is another capacitor in series with it. At its maximum value. Greater than the current in a resistor that is farther from the battery than the capacitor. Zero. Equal to the current in a resistive circuit in parallel with the capacitor circuit.
Answer:
The correct option is "Zero". A further explanation is given below.
Explanation:
As we know,
The capacitor is given by:
⇒ [tex]Q=C\times V[/tex]
Rate of change with respect to the time will be:
⇒ [tex]\frac{dQ}{dt}=C\times \frac{dV}{dt}[/tex]
Now,
It is mentioned in the question that the capacitor is completely charged, then
⇒ [tex]\frac{dV}{dt}=0[/tex]
i.e.,
⇒ [tex]\frac{dQ}{dt}=0[/tex]
All other choices available aren't related to that same scenario in question. So the answer above is the perfect one.
What is the kinetic energy of a go-kart with a mass of 25 kg and a velocity of 2 m/s?
Answer:
50 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass
v is the velocity
From the question we have
[tex]k = \frac{1}{2} \times 25 \times {2}^{2} \\ = 12.5 \times 4[/tex]
We have the final answer as
50 JHope this helps you
How can speed and velocity be used to describe motion?
Answer:
speed described how fast the object moves velocity describes how fast and in what direction its moved..
How are computers used in education and entertainment? List them.
Answer:
The computers used in education and entertainment are:
Explanation:
Analog computer,Digital COMPUTER,Hybrid Computer
The point of a nail has an area of 0.25cm squared, and an average person has a weight of 700 N. Explain in detail why it is possible to lie on a bed of 4000 nails, but not on one single nail. Thanks
Answer:
It is possible to lie on a bed of 4000 nails, but not on one single nail because a bed of 4000 nails exerts lesser pressure than a bed of one single nail .
Explanation:
Given;
weight of an average person, W = F = 700 N
area of the nail, A = 0.25 cm² = 0.25 x 10⁻⁴ m²
The pressure exerted by a single nail is given as;
P = F / A
P = 700 / (0.25 x 10⁻⁴)
P = 2.8 x 10⁷ N/m²
The pressure exerted by 4000 nails is given as;
Total surface area of 4000 nails = 4000 x 0.25 x 10⁻⁴ m² = 0.1 m²
P = F / A
P = 700 / 0.1
P = 7,000 N / m²
From the calculated values, 4000 nails exerts less pressure on the person than one single nail because pressure decreases with increase in surface area of an object.
Thus, it is possible to lie on a bed of 4000 nails, but not on one single nail because a bed of 4000 nails exerts lesser pressure than a bed of one single nail .