Students were asked to select methods to increase the rate of dissolving a solid. Which methods would increase the rate?
Answers
Increasing the surface area, stirring or agitating the mixture, raising the solvent's temperature, and employing a solvent with a stronger polarity or one that is more similar to the solid's chemical makeup are all ways to speed up the dissolving process.
The methods to increase the rate of dissolving a solid.There are several methods that can increase the rate of dissolving a solid, including:
Increasing the surface area of the solid by crushing, grinding or pulverizing it into smaller pieces.
- Stirring or agitating the mixture, which helps to distribute the solvent and increase contact between the solvent and the solid.
- Increasing the temperature of the solvent, which increases the kinetic energy of the solvent molecules, making them more likely to collide with and dissolve the solid.
- Using a solvent that has a higher polarity or is more similar in composition to the solid, which can increase the attraction between the solvent and the solid and promote faster dissolving.
Therefore, the methods that would increase the rate of dissolving a solid are increasing surface area, stirring or agitating the mixture, increasing the temperature of the solvent, and using a solvent that has a higher polarity or is more similar in composition to the solid.
Learn more on methods to increase the rate of dissolving a solid here: https://brainly.com/question/28850258
#SPJ1
Related Questions
The
of a chemical reaction is the maximum amount of product that can be produced
Answers
Answer= Maximum amount of product that could be obtained under ideal conditions from a given amount of reactants.
Explanation:
The theoretical yields is the ideal maximum amount of a product that can be produced during a chemical reaction while the limiting reactant is the reactant that determines the maximum amount of product that can be formed. mitgliedd1 and 61 more users found this answer helpful.
In a chemical reaction, the reactants (beginning elements or compounds) but have the same number and type of atoms as the products (the new substance created). This is an example of...
a) law of conservation of mass
b) law of conservation of energy
c) covalent bonding
d) product synthesis
Answers
Answer:The law of conservation of matter says that matter cannot be created or destroyed. In chemical equations, the number of atoms of each element in the reactants must be the same as the number of atoms of each element in the products. ... There are two oxygen atoms in the reactants and two atoms of oxygen in the product.
Explanation:
can someone help me figure out what the Lewis structure for NCl2−?
Answers
Answer:
Chlorine is in group 7A, so it has 7 valence electrons
The Lewis structure for the molecule NCl²⁻ with -2 charge is attached in the image below.
What are Lewis structures?Lewis structures are also called as electron dot structures and can be drawn if the molecular formula of a compound is known. It provides information regarding the nature of bond and the position of atoms .
They are also capable of exhibiting the lone pair if any present in a molecule or compound.Lewis defined a base to be an electron pair donor and an acid to be an electron pair acceptor.
They are capable of reflecting electronic structure of elements and even the pairing of electrons . In the diagram, each dot represents an electron while a pair of dots represent a bond between the atoms.It helps in understanding the bonding between the two atoms.
Learn more about Lewis structures,here:
https://brainly.com/question/20300458
#SPJ5
What is a characteristic of asexual reproduction?
Answers
Answer:
Sexual reproduction
what would Sodium+oxygen -> sodium oxide look like in chemical formula?
Answers
4 Na + O2 → 2 Na2O
I think that's it
Bright red color (R) is dominant over grey color (r) in a type of fish , what color is the fish
Answers
For each of the following balanced equations, calculate how many grams of each product would be produced by complete reaction of 15.0 g of the reactant
indicated in boldface. (*)
a. *2BC13(s)* + 3H2(g) -> 2B(s) + 6HCl(g)
b. *2Cu S(s)* + 302(g) → 2Cu2O(s) + 2SO2(g)
C. 2Cu2O(s) + *Cu2S(s)* -> 6Cu(s) + SO2(g)
d. CaCO3(s) + *SiO2(s)* → CaSiO3(s) + CO2(g)
Answers
Answer:
vov-nhmb-snm
come here for study boy were not allowed girl are allowed i am also girl so come for study here we only study goo.gle meet
name three pure elements and three pure compounds
Answers
Answer:
Pure elements:
Hydrogen(H)
Nitrogen(N)
Magnesium (Mg)
Pure Compounds:
Oxygen gas(O2)
Water (H2O)
Ammonia (NH3)
Explanation:
Hope it helps.Please mark me brainliest.^-^
What pattern do we see when looking at the fossil record? *
Organisms became more complex over time
Organisms became simpler over time
Organisms changed very quickly over time
Answers
Answer:
Organisms become more complex over time.
Explanation:
We all evolved from the first bacteria, which was relatively simple. We see over time that things become more adapted, slowly adding eyes, lungs, behavioral patterns, and consciousness.
Which of the following is a part of the kinetic-molecular theory?
(PLEASE HELP)
Your answer:
Most of the volume of a gas is occupied by gas particles.
The particles of a gas are in constant, random motion.
The average kinetic energy of a gas is dependent upon the identity of the gas.
Gases have indefinite shape and indefinite volume.
Attractive forces between gas molecules must be accounted for with a gas law calculation.
Answers
Answer:
2)The particles in a liquid are moving past one another constantly.
3)The particles in gas move freely in all directions.
4)The particles in a solid vibrate in a fixed position.
6)The particles in a gas have few attractions between them.
7)The particles in all states of matter are always moving.
Explanation:
QUICK HURRY FIRST ANSWER GETS BRAINLIST!!!! Why is it important to add coefficients to the
reaction equation to make it balanced? (Hint: your
answer should talk about the law of conservation of mass)
Answers
This is hard, isn't it? please help me though. PLEASE
Answers
will gravitational force change based on a change of mass or a change of distance between objects
Answers
Answer:
The size of the gravitational force is proportional to the masses of the objects and weakens as the distance between them increases.
How many liters of CH4 gas are there in 1.20 moles of CH4 when the gas is held under standard conditions?
Please answer quickly!
Answers
Answer:
26.88 L
Explanation:
When any gas is held under standard conditions, one mol will occupy 22.4 liters.
With the above information in mind, we can calculate how many liters would 1.20 moles of CH₄ gas occupy under standard conditions:
1.20 mol * 22.4 L/mol = 26.88 L
So 1.20 moles of CH₄ would occupy 26.88 liters.
If one mole of nitrogen is used how many liters of hydrogen are needed
Answers
Answer:
300
Explanation:
Thread-like structures that are found in the nucleus of a cell that contains all DNA.
A.) DNA
B.) Genes
C.) Chromosomes
D.) Nucleus
Answers
Explore: Arrange the matter
from largest to smallest.
Organ
Molecule
Organelle
. Atom
Organism
. Cells
. Tissues
Elements
Answers
Answer:
The levels, from smallest to largest, are: molecule, cell, tissue, organ, organ system, organism, population, community, ecosystem, biosphere.
Explanation:
The biological levels of organization of living things arranged from the simplest to most complex are: organelle, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere.
Answer:
the matter
from largest to smallest.
- organism-organ-organelle-tissue-cell-atom-elements-molecule
A container of hydrogen peroxide originally has a mass of 28.96 grams and then completely decomposes into water and oxygen gas. The mass of water produced is 15.33 g. What mass of oxygen gas was also produced?
Answers
Answer:
dhshrvehduvhdhehejieeiie
Which change does not increase the speed of reaction between zinc and hydrochloric acid?
Answers
If you want a more quantitative analysis of reaction rate, you can perform the experiment in a eudiometer tube that is inverted and completely filled with liquid. As the hydrogen gas collects in the tube you can measure its accumulated volume with time. That will allow you to determine an approximate kinetic rate law for the process. The rate law determined in this manner will suffer from error due to temperature and surface area changes as well as gas volume error due to water vapor. But, it is an interesting application of chemical kinetics.
By adding the decreasing the temperature, the speed of the reaction will not be increased.
What is speed of the reaction ?The reaction rate, which is a measure of how quickly reactants are consumed as well as products are created, determines the speed of a reaction.
When the temperature is lowered, the molecules move more slowly and collide less. The reaction's speed is slowed as the temperature drops.
Therefore, by adding the decreasing the temperature, the speed of the reaction will not be increased.
To know more about speed of reaction.
https://brainly.com/question/19267538
#SPJ2
For the balanced equation shown below, how many moles of N2 will react with 0.3034 moles of Mg?
3 Mg + N2 Mg3N2
Round answer to 4 sig-figs.
Answers
Answer:
0.1011 moles of N₂
Explanation:
This is the reaction:
3 Mg + N₂ → Mg₃N₂
3 moles of magnesium can react to 1 mol of nitrogen in order to produce 1 mol of magnesium nitride.
We can solve this by a rule of three:
3 mol of Mg need 1 mol of N₂ for the reaction
Then, 0.3034 moles of Mg may react to (0.3034 . 1) / 3 = 0.1011 moles of nitrogen.
The stoichiometry is 3:1
1. Take a look at all the elements in period 3. What do you notice? *
5 points
A. They have the same number of energy levels
B. The number of energy levels decreases as you go across the period from left to right
C. They have the same number of valence electrons
D. The number of valence electrons decreases as you go across the period from left to right
Answers
Answer:
D
Explanation:
beacause all the elements in period 3 has different valence electrons hence you look at the first element in period 3 is sodium which has a valence electron of 1 when you go across the period to the right their valence electron decreases to be negative
Answer:
D is the correct answer i hope this is correct
why is cardboard, paper, or ceramic a better choice for coffee mugs?
Answers
3. A sample of air in a syringe exerts a pressure of 1.02 atm at 22.0°C. The syringe is placed in a boiling-water bath at 100.0°C. The
pressure is increased to 1.23 atm by pushing the plunger in, which reduces the volume to 0.224ml What was the initial volume?
Answers
Answer:
0.214 mL
explanation:
Ideal Gas law is applied to the ideal gases. The initial volume of air in the syringe when applied pressure and reducing the volume to 0.2234 mL is 0.214 mL.
What is the Ideal Gas Equation ?The equation relating all the characteristics of a gas and behaving or assuming to be ideal is the ideal gas law equation.
pV = nRT
Here, p is the pressure, V is the volume, R is the universal gas constant, n is the number of moles and T is the temperature.
According to the law, the initial and final values of gas are related as
[tex]\dfrac{P_{1} V_{1} }{T_{1} } =\dfrac{P_{2} V_{2} }{T_{2} }[/tex]
The initial pressure P₁ is 1.02 atm and final pressure P₂ is 1.23 atm.
The initial temperature T₁ is (22+273)=295 K and the final temperature (100+273)=373 K
The final volume V₂ given is 0.224 mL
Placing the values into the ideal gas equation and solving, we get the value of initial volume.
V₁= 0.214 mL
The initial volume of air in the syringe when applied pressure and reducing the volume to 0.2234 mL is 0.224 mL.
Learn more about Ideal gas law equation.
https://brainly.com/question/13821925
#SPJ2
If the substance in the diagram was heated to T2, what is happening if the substance is allowed to approach T1?
1.The average kinetic energy is decreasing
2. The average kinetic energy has increased
3. The highest energy level has decreased
4. Fewer molecules would have a lower energy level
5. More molecules have a higher energy level
Answers
Answer:
b
Explanation:
Which statement is true regarding nuclear power plants?
The disposal of radioactive wastes is an intended benefit.
Uranium mining is an intended benefit.
Damage caused to the environment is an unintended consequence.
The creation of large amounts of electricity is an unintended consequence.
Answers
but its c because it dealing with power
Explanation:
How many moles are in 1.7 x 10^50 particles of Al?
Answers
2.8 × 10²⁶ moles Al
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
MolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[Given] 1.7 × 10⁵⁰ particles Al
[Solve] moles Al
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[DA] Set up: [tex]\displaystyle 1.7 \cdot 10^{50} \ particles \ Al(\frac{1 \ mol \ Al}{6.022 \cdot 10^{23} \ particles \ Al})[/tex][DA] Divide [Cancel out units]: [tex]\displaystyle 2.82298 \cdot 10^{26} \ moles \ Al[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
2.82298 × 10²⁶ moles Al ≈ 2.8 × 10²⁶ moles Al
a moon phase that looks like a full circle is called.
Answers
Answer:
a full moon or new moon
Explanation:
Which of the following is an oxidation-reduction reaction?
ZnS(s) + 2O2(g) Right arrow. ZnSO4(s)
CaO(s) + H2O(l) Right arrow. Ca(OH)2(s)
6Li2O(s) + P4O10(g) Right arrow. 4Li3PO4(s)
SO2(g) + H2O(l) Right arrow. H2SO3(aq)
Answers
Answer:
A: ZnS(s) + 2O2(g) --> ZnSO4(s)
Explanation:
;) good luck
Answer:
The answer is A or the first choice
Explanation:
ZnS(s) + 2O2(g) Right arrow. ZnSO4(s)
HAVE A GREAT DAY STAY SAFE
Karen has 21 green blocks. The ratio of green blocks to the yellow blocks she owns is 3:1. How many blocks does she own?
Answers
Answer:
28 blocks
Explanation:
Amount: 21 + y
Ratio: 3:1
Total Ratio: 4
1 = yellow blocks
say if 3 is to 1 then 21 is to how many?
21 ÷ 3
= y = 7
= 21 + 7
= 28 blocks
( or you can use the practical method using your fingers )
Step 4: Model the energy change in the reaction.
a) Create an energy graph that illustrates the energy change in the reaction.
b) Construct your graph on a blank sheet of paper. Be sure to label the axes, provide a title, and
identify the reactants and products on the graph.
Answers
Answer:
Sorry if this is hard to see, this was the best I could do, but the top line says C3H8 + O2, and the bottom line says CO2 + H20, with the heat input being -2043.96 kJ/mol
Explanation:
This is correct for me