Suppose you are performing a titration. At the beginning of the titration, you read the titrant volume as 2.51 mL. After running the titration and reaching the endpoint, you read the titrant volume as 29.95 mL. What volume, in mL, of titrant was required for the titration

Answers

Answer 1

The volume of titrant required for the titration would be 27.44 mL

From the illustration, the initial titrant volume was 2.51 mL. This figure represents the initial reading on the burette.

In the same vein, the final volume of the titrant was 29.95 mL. This figure represents the final reading on the burette.

In order to get the volume of titrant used:

Volume of titrant used = final volume - initial volume

                             = 29.95 - 2.51

                                = 27.44 mL

More on the volume of titrant used in titrations can be found here: https://brainly.com/question/4250180


Related Questions

The metallic character of an element is defined as the properties typical of a metal, especially the tendency to lose electrons in chemical reactions.
Arrange the following elements in order of decreasing metallic character.
P, Zn, Cr, Cs, F, S, Ca
Rank from most to least metallic character. To rank items as equivalent, overlap them.

Answers

Answer:

Rb, Zn, P, S, F, Ca, Co, Cr

Rb, Zn, P, S, F, Ca, Co, Cr elements in order of decreasing metallic character.

What is a metallic character?

The metallic character of an element is defined as the properties typical of metal, especially the tendency to lose electrons in chemical reactions.

Metallic character depends on the ability of an element to lose its outer valence electrons. Examples of properties related to metallic character include thermal and electrical conductivity, metallic lustre, hardness, ductility, and malleability. The most "metallic" element is francium, followed by caesium.

Hence, Rb, Zn, P, S, F, Ca, Co, and Cr elements in order of decreasing metallic character.

Learn more about the metallic character here:

https://brainly.com/question/25500824

#SPJ2

When energy is conserved or transferred some energy becomes unavailable to do useful work what happened to the unavailable energy?
A) It is conducted
B) It is completely destroyed
C) It is given off as the
D) It is given off as microwaves

Answers

Answer:

The answer is C) It is given off as heat

Explanation:

        Definition of unavailable energy : energy that cannot perform work while under the current conditions; see also available energy, energy deterioration, and entropy.

How may energy become scarce?

       Energy can transform from more useful forms into less useful forms, but it cannot be created or destroyed. It turns out that some energy gets transformed into an useless form in every real-world energy transfer or transformation.

    Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or unpredictability since work is produced by organized molecular motion.

   What is Mcq for McVisible Energy? Available energy is the largest portion of low-grade energy (heat) that is available for conversion. The smallest amount of heat that needs to be rejected is referred to as unavailable energy.

     For the system with two heat reservoirs undergoing this irreversible heat transfer, entropy increases. We'll see that this implies that the ability to use the transferred energy for work has been lost. Energy is no longer available to perform work due to the increase in entropy.

To Learn more About unavailable energy, Refer:

https://brainly.com/question/8713296

#SPJ2

A mixture of two or more metals is called: A) Mixture B) Compound C) solution D) alloy

Answers

Answer:

C

Explanation:

Mixture of 2 or more metals is a compound

example is water which is made up of hydrogen and oxygen.

Identify key concepts/terminologies about solutions or concentration of solutions

PLS HELP ASAP!! ​

Answers

Question:

identify keys concepts/terminologies about solutions or concentration of solutions.

Answer:

They are the two basic solution concentration terms that you need to know.We always need to keep an account of the amount of solute in a solution.The amount of solute in the solvent is what is called the concentration of a solution.In chemistry,we define concentration of solution as the amount of solute in a solvent.

Explanation:

Depending upon amount of solute present,it is called a dilute, concentrated or a saturated solution.Different substances in a given solvent have a different solubilities at the same temperature.The most common method for expressing the concentration of a solution is the percentage method

#Carry On Learning :)

Anatomy of the bone. The bone is made up of compact bone, spongy bone, and bone marrow. Compact bone makes up the outer layer of the bone. Spongy bone is found mostly at the ends of bones and contains red marrow. Bone marrow is found in the center of most bones and has many blood vessels. There are two types of bone marrow: red and yellow. Red marrow contains blood stem cells that can become red blood cells, white blood cells, or platelets. Yellow marrow is made mostly of fat
that means what a red bone marrow contains?
_______________________
(the one who gives the correct ans first is the brainliest)​

Answers

Answer:

red bone marrow contains blood stem cells that can become red blood cells ,white blood cells ,or platelets

Explanation:

Hey! Please help. Will mark brainlist if u are right, ty

Answers

Answer:

40 hopefully right

Explanation:

A cylinder contains helium gas with a volume of 2.60 L at 20 C and 768 mm Hg. If the balloon ascends to an altitude where the helium pressure is 614 mm Hg, what is the volume of gas? (Assume the temperature has not changed)

a. 12.2
b. 1.2
c. 20.2
d. 3.2

Answers

Answer: 3.2 [D]

Explanation:

Use Boyles law

(Might want to rotate image, sorry!)

Which statement about petroleum fractions is correct?
A. All petroleum fractions are used as fuels.
B. Gas oil is used to make bottled gas for heating.
C. Hydrocarbons in diesel have higher boiling points than hydrocarbons in
gasoline.
D. Molecules in kerosene are larger than molecules in fuel oil.

Answers

Answer: It is either C. or D.

Explanation: I did some reading about it and it talks about fuel but I know that it didn’t say all of them are used as fuels.  maybe I’m wrong

Petroleum is composed of hydrocarbons of various chain length. Different products can be extracted from petroleum but all products cannot be used as fuel.

Hydrocarbons in diesel have higher boiling point than that of gasoline.

What is petroleum?

Petroleum is a naturally occurring crude liquid mixture of hydrocarbons. Petroleum can be fractionated to different components such as gasoline, kerosene, diesel etc.

Each fraction vary in the number of carbons and hydrogens in it or called the difference in chain length. Kerosene contains 8-16 carbons where as gasoline and diesel have more carbons.

Not all products of petroleum fractionation can be used as fuel. Some of them with effective quality is taken as fuels.

The boiling point of hydrocarbons in diesel is greater (about 130-380 degree Celsius) than the hydrocarbons in gasoline which is having boiling point in he range 30-225 degree Celsius.

Therefore, the statement C is correct.

To learn more about petroleum, find the link below:

https://brainly.com/question/4147953

#SPJ5

plss anwer my question
brainliest for who answers my questions​

Answers

Answer:

13. C
14. B
15. C

Answer:

13.C

14.B

15.C

16.Chemical element

Chemical Element are called substance or element that cannot be decomposed or broken down into simpler substances by ordinary chemical process.

Chemical elements are those elements which cannot be chemically broken down into simpler substances and are primary constituents of all matter. They are fundamental ingredients of all matter in existence which can be combined in reaction to create chemical substance each chemical element in the universe has unique properties that distinguish it from all of the Other chemical elements. For example hydrogen is an element.

Hope that helps

hidrógeno
notacion electronica

Answers

Answer:

Hydrogen

Electronic notation

Explanation:

What is a solution?
A. A mixture of two solids blended together
B. A compound that is in liquid and gas states
C. A liquid with something dissolved in it
OD. A clear liquid with nothing dissolved in it

Answers

a liquid mixture in which the minor component (the solute) is uniformly distributed within the major component (the solvent).

Thermal energy is associated with _____.(1 point)
electric charge
particle motion
bond strength
substance volume

Answers

Answer:

see below

Explanation:

1. particle motion

2. The particles of a liquid can slide past one another.

3. the kinetic energy required to break forces between particles

4. increasing its temperature until it transitions from a solid to a liquid

5. A liquid becomes a gas.

[quizlet: captncrun]

Thermal energy is in the form of heat and light is always associated with the random motion of atoms and molecules. That form of kinetic energy is used to the rise in temperature.

The energy is released from the particles that are heated and collide with each other. This takes place by the particle motion.

Hence the option B is correct.

Learn more about the Thermal energy is associated with.

brainly.com/question/16953428.

Dirty water is a _____.

mixture
or
compound ?

Answers

Answer: mixture

Explanation: they are heterogeneous mixtures not homogeneous

It's Mixture

Reason:- Dirty water is a mixture of dirt and water. Mixture are made up of 2 or more different substance with different characteristics

(e) alkaline earth element with the least massive atoms​

Answers

Hopefully this helps you

The alkaline earth element with the least massive atoms is beryllium (Be). Beryllium, located in Group 2 of the periodic table, possesses the lowest atomic number and atomic mass within the alkaline earth elements.

Among the alkaline earth elements, which are found in Group 2 of the periodic table, beryllium (Be) stands out for having the least massive atoms. The periodic table is organized in a way that elements are ordered by increasing atomic number, which corresponds to the number of protons in an atom's nucleus. For alkaline earth elements, the atomic numbers increase from beryllium (Be) with atomic number 4 to radium (Ra) with atomic number 88.

Atomic mass, on the other hand, takes into account the sum of protons and neutrons in an atom's nucleus, as electrons contribute very little to the overall mass. Since beryllium (Be) has the lowest atomic number in the alkaline earth group, it also has the fewest protons and neutrons among its isotopes, leading to a lower atomic mass compared to other elements in the same group.

To learn more about periodic table

brainly.com/question/28747247

#SPJ3

The volume of a ballon is 2.85L at 1.00 atm. What pressure is required to compress the balloon to a volume of 1.70L?

Answers

Answer:

1.68 atm (if temperature is constant)

Explanation:

p1 * v1 = p2 * v2

1 * 2.85 = p2 * 1.70

2.85 / 1.70 = p2

p2 = 1.6764

There are so many gas laws like Charles's law, Avogadro’s law and many more, out of which Boyle's law is one of the most important law among all gas laws. The pressure is required to compress the balloon to a volume of 1.70L is  1.6764 atm.

What is Boyle's law?

According to Boyle's law pressure is inversely proportional to volume at constant Temperature. It is applicable only on the ideal gases. Since temperature is constant here, we can apply this law.

Mathematically

P₁V₁=P₂V ₂

P₁= initial pressure of balloon =1.0atm

V₁= initial volume balloon =2.85L

P₂=final pressure balloon =?

V ₂=final volume balloon =1.70L

Putting all values

1 × 2.85 = P₂×1.70

2.85÷ 1.70 = P₂

P₂ = 1.6764 atm

Therefore, the pressure is required to compress the balloon to a volume of 1.70L is 1.6764 atm.

To know more about Boyle's law, here:

https://brainly.com/question/1437490

#SPJ2

Think about the parts of an egg, and write down why you think it can act as a model of an animal cell. Also write down your predictions of what will happen when you leave an egg in vinegar for three days.

Answers

Answer:

Explanation:

Determine the treatments you’ll be using on your eggs, and prepare the substances you’ll need. You can make salt-water solutions by dissolving different amounts of table salt in containers of water (e.g. 100g, 200g, 300g of salt (NaCl) per liter). You can make solutions of food coloring by adding a few drops of each color into containers of  

The Eggsperiment with Vinegar solution. The first experiment conducted was the egg placed in vinegar solution which allowed the egg to become soft and bouncy . Vinegar is a weak acid which is 5% acetic acid in water (meaning vinegar is largely just water). The egg has a shell that is made up of calcium carbonate   an air cell forms at the large end of the egg. While the embryo is growing, the shell membranes surround and contain the white or albumen of the egg. The albumen provides the liquid medium in which the embryo develops, and it also contains a large amount of the protein necessary for proper development. I hope this was hopeful

List the metals that form only one type of ion (that is, metals whose charge is invariant from one compound to another). What are the group numbers of these metals

Answers

this question is in reference to the formation and naming of ionic compounds. Specifically, they want you to give examples of three ionic compounds with a metal to nonmetal ratio of 2 to 1. That means we need to have two metal atoms to metal ions, which are typically cat ions for every one non metal atom or an ion. In order for this to occur, we need to have the metal with half the charge of the nonmetal or the non metal with double the charge of the metal. So an example might be something like sodium sulfide. Sodium has one valence electron. It can give up sulfur needs to valence electrons in order to achieve an octet. So we need to. Sodium seems to give up one electron each to total so that sulfide can achieve an octet. Another one might be potassium oxide. Similar scenario. We've got potassium giving up one valence electron oxygen requiring too. So we need to potassium to supply the to valence electrons that oxygen needs to achieve an octet and lithium. Also in Group one A and alkali metal wants to give up just one valence electron to achieve an octet well to achieve, I guess a duet to be more like helium, and so it gives up one. If we have two of them, then we can provide the to valence electrons that sulfur needs. So this is sodium sulfide, potassium oxide and lithium sulfide. Remember when we name Ionic compounds? We named the Cat Ion with the name of the element and the anti on with the name of the Element, but with the ending oven of ID, a suffix of ID because each one of the cat ions donated their valence electrons to the anti on so the an ion could achieve an octet. Then all of the's will have an octet of valence electrons. Sulfur had six sodium had one. There were two of them, so we have a total of eight.

The metals that can form only one type of ion are Li, Al, Ca, Ba, Rb, W,Na, Mg and  Sr. They are called alkali metals.

Cobalt, Co is stable in both +2 and +3 oxidation state. So it can variable.

Lithium, Li only have +1 charge. So it is invariable from one compound to other.

Lead, Pb is variable as it has +2, +4 charge in which it is stable.

Pd has +2, +4 charge in which it is stable. So, It is variable.

Copper, Cu has +1, +2 charge. It is also variable. Potassium, K has only +1 charge. It is invariable. Aluminum, Al has only +3 charge. It is invariable.

Cesium, Cs is only stable in +1 charge. It is invariable. Molybdenum, Mo is stable in +4 and +6. It is variable. Calcium, Ca and Barium Ba are stable in +2 charge. It is invariable.

Rubidium, Rb is stable in +1 charge. It is invariable. Tungsten, W is stable in +6 charge. It is invariable. Iron, Fe is stable in +2, +3 charge. It is variable. Sodium, Na is stable in +1 charge. It is invariable. Mg and Sr are stable in +2 charge. It is invariable. Vanadium, V has +2, +3, +4, +5 charges. So, It is variable.

To know more about alkali metals

https://brainly.com/question/18153051

#SPJ3

Consider the following reaction: 2A + 3B --> 2C If you have 2 moles of A and 6 moles of B, what is the maximum number of moles of C that can be made by the reaction

Answers

Answer:

2 moles of C and no more

Explanation:

Consider the following reaction: 2A + 3B --> 2C If you have 2 moles of A and 6 moles of B, what is the maximum number of moles of C that can be made by the reaction

2A + 3B --> 2C '

2 of A make 2 of C if we have atleast 3 of B.

we ave more than enough B

2 of A will make 2 moles of C and no more

Write the formula of the conjugate base of C6H5SH.

Answers

Answer:

C6H5S^-

Explanation:

This is because you are removing the hydrogen to make it a conjugate base.

The formula for conjugate base of C6H5SH is C6H5S⁻.

What is conjugate base?

Conjugate base is defined as the substance which is formed when an acid liberate its protons.

The acid donate protons and the acid changes into base.

Conjugate acid is defined as the pair of compound that differs by its protons by gaining protons.

Conjugate acid and base are based in acid base theory.

Thus, the formula for conjugate base of C6H5SH is C6H5S⁻.

To learn more about conjugate base, refer to the link below:

https://brainly.com/question/12883745

#SPJ2

How do weak intermolecular bond strengths affect the melting and boiling point of a substance? (Picture is of answers I can choose from)

Answers

B) Both the melting point and boiling point are lower

This is because weak intermolecular forces need less energy for the forces to break compared to strong intermolecular forces. Less energy required means lower temperatures - low melting and boiling points

For a weak intermolecular bond, both the melting point and boiling point are lower.

A lesser energy is required to break bond of weak intermolecular forces while a greater energy is required to break bond of strong intermolecular forces.

E ∝ T

where;

E is the energy required to break the bondT is the temperature

A lesser energy means a lower temperature and a lower temperature will result in lower boiling point and melting point.

Thus, we can conclude that for a weak intermolecular bond, both the melting point and boiling point are lower.

Learn more here:https://brainly.com/question/14719148

(100 POINTS!!!!) In one to two sentences, describe the process by which the ionic compound, LiCl, would dissolve in the polar solvent, CH3COCH3

Answers

Answer:

LICL as an Ionic compounds has covalent ability and they are soluble in polar solvent such as CH3COCH3 but they are insoluble in non-polar solvents. Due to their polarity, CH3COCH3 will decreases the electrostatic forces of attraction thereby resulting in free ions in aqueous solution.

Water is the known as a polar solvent that can dissolve an ionic compounds very easy and as a polar solvent, the arrangement of oxygen and hydrogen atoms in water is in bent shape.

Ionic compounds like LICL that is very polar is soluble in the polar solvent water.

Polar solvents like CH3COCH3 will dissolve polar and ionic solutes because of the attraction of the opposite charges on the solvent and solute particles.

Learn more from

https://brainly.com/question/25422160

Explanation:

People use solution of Na3PO4 to clean walls before putting up wall paper. If the entration is 1.7% (m/v). What mass of Na3PO4 is needed to make 2L of solution? ​

Answers

Answer:

34 grams

Explanation:

Assuming m/v means mass of solute / volume of solvent, then set up the equation:

1.7/100=m/2000, by cross multiplication, m=34 grams

Read the following statement:

The amount of force acting on an object is equal to its mass times its acceleration.

Does the statement describe a scientific law?

No, because it is applicable to all cases in the natural world
Yes, because it is applicable to just a few cases in the natural world
No, because it describes the relationship between force and acceleration
Yes, because it describes how mass and acceleration affect force

Answers

The last one should be right

A chemist makes up a solution by dissolving 42.0 g of Mg(NO3)2 in enough water to produce a final solution volume of 213 mL. To calculate the molarity of the solution, what additional information is needed

Answers

Answer:

the molar mass of Mg(NO3)2

the mass of the water added the density of the Mg(NO3)2

the volume of water used

Calculate the number of moles of Mg(NO3)2 used to make up this solution. 42.0 g of Mg(NO3)2 is equivalent to___ mol Mg(NO3)2.

Now calculate the molarity of the solution, giving your answer to the correct number of significant digits.

Molarity of Mg(NO3)2 = ___M

Balancing Chemical Equations
Based on the chemical equation, use the drop down menu to choose the coefficients that will balance the chemical
equation
(vbo,- (v]),
Will make Brainlyest plzzzz help!!!

Answers

Answer:

3O2→ 2O3

Explanation:

by multiplying 2 by 3 we get 6 on both sides

five differences between true solution and false solution​

Answers

Answer:

k im silly frrr lol have a great day

How many aluminum atoms are there in 3.50 grams of Al2O3?​

Answers

Answer:

Answer:

Aluminium atoms =  4.13 *10^22 aluminium atoms

Explanation:

Explanation:

Step 1: Data given

Mass of Al2O3 = 3.50 grams

Molar mass of Al2O3 = 101.96 g/mol

Number of Avogadro = 6.022 * 10^23 /mol

Step 2: Calculate moles Al2O3

Moles Al2O3 = mass Al2O3 / molar mass Al2O3

Moles Al2O3 = 3.50 grams / 101.96 g/mol

Moles Al2O3 = 0.0343 moles

Step 3: Calculate moles Aluminium

In 1 mol Al2O3 we have 2 moles Al

in 0.0343 moles Al2O3 we have 2*0.0343 = 0.0686 moles Al

Step 4: Calculate aluminium atoms

Aluminium atoms =  moles aluminium * Number of Avogadro

Aluminium atoms =  0.0686 * 6.022 * 10^23

Aluminium atoms =  4.13 *10^22 aluminium atoms

The table shows the boiling points of fluorine, chlorine and bromine.
Element
Boiling point in °C
Fluorine
-186
Chlorine
-34
Bromine
+59
(c) Explain why the boiling points in the table are low.

Answers

Explanation:

the chemicals are group 7 elements and one of their characteristics is that the melting and boiling point increase progressively

Stop asking I don’t know

Calculate the pH at the equivalence point for the following titration: 0.25 M HCOOH versus 0.25 M NaOH.

Answers

The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.

Let's consider the following neutralization reaction.

HCOOH + NaOH ⇒ HCOONa + H₂O

At the equivalence point, 0.25 M HCOOH completely reacted with 0.25 M NaOH to form 0.25 M HCOONa.

HCOONa undergoes hydrolysis. The net ionic equation is:

HCOO⁻(aq) + H₂O(l) ⇄ HCOOH(aq) + OH⁻(aq)

Given the concentration of HCOO⁻ is 0.25 M (Cb) and the basic dissociation constant of HCOO⁻ is 4.8 × 10⁻¹¹ (Kb), we can calculate the concentration of OH⁻ using the following expression.

[tex][OH^{-} ] = \sqrt{Kb \times Cb } = \sqrt{(4.8 \times 10^{-11} ) \times 0.25 } = 3.5 \times 10^{-6} M[/tex]

The pOH of the solution is:

[tex]pOH = -log [OH^{-} ] = -log (3.5 \times 10^{-6} ) = 5.5[/tex]

The pH of the solution is:

[tex]pH = 14 -pOH = 14 -5.5 = 8.5[/tex]

The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.

Learn more: https://brainly.com/question/2728613

He says that because the oxygen atoms are split between two different molecules in the products, the equation does not support the law of conservation of matter. Is your friend right? explain your answer?

Answers

According to conservation of matter, there should be equal amounts of all elements on both the reactant and product side.

Reactant:

1 Ca

1 C

1 O

Product:

1 Ca

1 C

3 O

Therefore, your friend is right because the law of conservation of matter is not followed in this chemical equation.

Other Questions
PLEASE HELP ME ASAP Andre is found murdered in the office of his construction company. His father began the company when Andre was a boy and several of Andre's brothers and cousins work for the company. After a lengthy investigation, detectives uncover evidence that Andre's brother James shot Andre in order to take his place as the manager of the company. Since the perpetrator was a member of Andre's family, what type of homicide would this be classified as? A. friendly homicide B. primary homicide OC. close homicide OD. secondary homicide Which organ is Two tissue what do cecilias represent in the language of flowers? Observa esta imagen y escribe en tu cuaderno otros bocadillos que podran estar diciendo los personajes Find the area of the blue shaded region. Fill in the blank. The blue shaded region is ____ square units 1.Find the missing fraction, decimal, or percent. Reduce fractions to the lowest terms.Question: 93% what is the equivalent fraction and decimal?Hint: separate your answers for the missing information with a comma make sure not to haveadditional spaces in your answers. Ex: 93/100,93 Ex: 93%,.93 Ex: 93/100,93%* The ratio of pages Kim reads tominutes that pass is 10:15. Howmany minutes will pass if Kimreads 40 pages? The graph of an object's position over time is a horizontal line and y is not equal to 0. What must be true aboumotion? (1 point)O The acceleration is constant and non-zero.O The velocity is constant and non-zero.0 The acceleration is negativeO The velocity is zero. band music help someone?? What maps group contacts (personal and professional) identifying who knows each other and who works together? A rope 64 m long is cut into 3 pieces. The second piece is 3 times as long asthe first piece. The third piece is 4 times as long as the second piece. Findthe length of each piece of rope. What did Thomas Jefferson value What is mechanical energy? The energy that is associated with the motion or position of an object The energy that travels in waves from the moon Any energy that travels through a medium like water The stored energy in a substance like oil or gasoline The length of a rectangle is 10 times its width. If the area of the rectangle is 52yd^2, find its approximate width. Han earns $33.00 for babysitting 4 hours. At this rate, how much will he earn if he babysits for 1 hour? HELPPPPPTEACHER:In problem 1 part B is correct. Part A for the estimate was not completed. For problem 2, is GCF or LCM what you would use? I like the problem you made up in problem 3. To solve it would you divide or subtract? Where is United Arab Emirates located The data points in the table show minutes on phone calls Identify the missing values in the table.per day, x, and text messages sent per day, y. The least-squares regression line for the data is j = 100 - 0.5x.Use this table to answer the question.A=B=C =D = Look the picture of the lady describe her what is the greatest number of relative maximum that a polynomial of degree 15 can have? Select the right answer among them 1. 14 2. 6 3. 9 4. 7 5. 4