Swissie Triangular Arbitrage. The following exchange rates are available to you. (You can buy or sell at the stated? rates.) Assume you have an initial SF11,400,000. Can you make a profit via triangular arbitrage? If so, show the steps and calculate the amount of profit in Swiss francs? (Swissies).
Mt. Fuji Bank yen 93.61/$
Mt. Rushmore Bank SF1.08/$
Mt. Blanc Bank yen 88.17/SF
Calculate the first and the second arbitrage opportunity attempt below: (Round to the nearest cent.)

Answers

Answer 1

Answer:

a. Yes. You can make a profit via triangular arbitrage.

b. The steps are:

1. Use the SF11,400,000 to buy yen at Mt. Blanc Bank at yen 88.17/SF.  This will yield yen 1,005,138,000 (SF11,400,000 * yen 88.17).

2. Use the yen purchased above, yen 1,005,138,000, to buy dollars at Mt. Fuji Bank at yen 93.61/$.  This will result to $10,737,506.68 (yen 1,005,138,000 / yen 93.61).

3. Use the dollar $10,737,506.68 to buy swiss francs at Mt. Rushmore Bank at the exchange rate of yen SF1.08/$.  This will yield SF 11,596,507.21 ($10,737,506.68 * SF1.08).

4. The arbitrage gain = SF 196,507.21 (SF 11,596,507.21 - SF 11,400,000).

Explanation:

Triangular arbitrage exists when there are discrepancies in the exchange rates of three countries.  These discrepancies are then taken advantage of by arbitrageurs in order to realize some profits by engaging in currency trading and speculation.  It is legally recognized in the USA as a means of providing liquidity to exchange markets and ensuring market efficiency.


Related Questions

Newhard Company assigns overhead cost to jobs on the basis of 115% of direct labor cost. The job cost sheet for Job 313 includes $15,745 in direct materials cost and $10,700 in direct labor cost. A total of 1,550 units were produced in Job 313. Required: a. What is the total manufacturing cost assigned to Job 313

Required:
What is the total manufacturing cost assigned to Job 313? What is the unit product cost for Job 313?

Answers

Answer:

Results are below.

Explanation:

First, we need to allocate overhead:

Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base

Allocated MOH= 1.15*10,700= $12,305

Now, we can determine the total manufacturing cost:

Total manufacturing cost= 15,745 + 10,700 + 12,305

Total manufacturing cost= $38,750

Finally, the unitary cost:

Unitary cost= 38,750 / 1,550

Unitary cost= $25

Your firm has sales of $47,000, current assets of $5,100, current liabilities of $6,200, net fixed assets of $51,500, and a profit margin of 5 percent. The firm has no long-term debt and does not plan on acquiring any. The firm does not pay any dividends. Sales are expected to increase by 7 percent next year. If all assets, short-term liabilities, and costs vary directly with sales, how much additional equity financing is required for next year

Answers

Answer:

$1,013.50

Explanation:

Projected assets = (Current assets + Fixed assets) * 1.10

Projected assets = ($5,100 + $51,500) * 1.07

Projected assets = $60,562

Projected liabilities = Current liabilities  * 1.07 = $6,200 * 1.07 = $6,634

Current equity = Current assets + Fixed assets - Current liabilities = $5,100 +  $51,500 - $6,200 = $50,400

Projected increase in retained earnings = Sales * 5% * 1.07 = $47,000 * 5% * 1.07 = $2,514.50

Equity funding need = Projected assets  - Projected liabilities  -  Current equity - Projected increase in retained earnings

Equity funding need = $60,562 - $6,634 - $50,400 - 2,514.50

Equity funding need = $1,013.50

So therefore, the equity funding need is $1,013.50

Explain the biggest danger of not recording your transactions in a separate registry

Answers

Answer:

Good records allow you to identify all of your assets, expenses, income, and liabilities. This lets you see your strengths and weaknesses of your business, which will allow you to make much better financial decisions.

The biggest danger of not recording your transactions in a separate registry is that you would not be able to keep accurate records.

This may lead to issues whereby there are inaccurate records. This can impede the growth of your business.

Without proper records, you cannot control your resources and can also stocks and fixed assets could be tampered with.

Read more on https://brainly.com/question/21847128?referrer=searchResults

you lend a friend 10,000 dollars for which your friend will repay you 27,027 dollars at the end of 5 years. What interest rate are you charging your friend?

Answers

Answer:

The interest rate is "21.999%".

Explanation:

The given values are:

Amount lent,

= 10,000

Amount repaid,

= 27,027

Years (n),

= 5

As we know,

⇒  [tex]Amount \ repaid = Amount \ lent\times (1+r)^n[/tex]

On substituting the given values, we get

⇒                [tex]27,027=10,000\times (1+r)^5[/tex]

⇒                  [tex]\frac{27,027}{10,000}=(1+r)^5[/tex]

⇒                 [tex]2.7027=(1+r)^5[/tex]

⇒                 [tex]1+r = (2.7027)^{(1/5)}[/tex]

⇒                 [tex]1+r=1.21999[/tex]

On subtracting "1" from both sides, we get

⇒          [tex]1+r-1=1.21999-1[/tex]  

⇒                      [tex]r=0.21999[/tex]

i.e.,

⇒                      [tex]r=21.999 \ percent[/tex]

You are planning to save for retirement over the next 25 years. To do this, you will invest $820 per month in a stock account and $420 per month in a bond account. The return of the stock account is expected to be 10.2 percent, and the bond account will pay 6.2 percent. When you retire, you will combine your money into an account with a 7.2 percent return. How much can you withdraw each month from your account assuming a 20-year withdrawal period? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)

Answers

Answer:

The withdraw amount is "11,227.42".

Explanation:

The given values are:

In stock account,

PMT = $820

Interest rate = [tex]\frac{10.2 \ percent}{12}[/tex]

N = 300

PV = 0

In Bond account,

PMT = $420

Interest rate = [tex]\frac{6.2 \ percent}{12}[/tex]

N = 300

PV = 0

Now,

By using the FV (Future value) function, the value in Stock account will be:

= [tex]FV(rate,nper,pmt,[pv],[type])[/tex]

= [tex]1,125,795.30[/tex]

By using the FV (Future value) function, the value in Stock account will be:

= [tex]FV(rate,nper,pmt,[pv],[type])[/tex]

= [tex]300,181.3321[/tex]

After 25 years,

The value throughout the account, will be:

= [tex]300,181.3321 + 1,125,795.30[/tex]

= [tex]1,425,976.63[/tex]

By using the PMT function, we can find the with drawling amount. The amount will be:

= [tex]PMT(rate, nper, pv, [fv], [type])[/tex]

= [tex]11,227.42[/tex]

Each week Bill buys exactly 7 bottles of cola regardless of its price. Bill's own price elasticity of demand for cola IN ABSOLUTE VALUE is

Answers

Answer:

0

Explanation:

If he doesn't care about the price then that means that the product is perfectly inelastic AKA it has an elasticity of 0

Harbour Company makes two models of electronic tablets, the Home and the Work. Basic production information follows:
Home Work
Direct materials cost per unit 30 48
Direct labor cost per unit 20 30
Sales price per unit 300 500
Expected production per month 700units 400units
Harbour has monthly overhead of $175,200, which is divided into the following cost pools:
Setup costs $ 68,800
Quality control 58,400
Maintenance 48,000
Total $ 175,200
The company has also compiled the following information about the chosen cost drivers:
Home Work Total
Number of setups 42 58 100
Number of inspections 340 390 730
Number of machine hours 1,700 1,300 3,000
Required:
1. Suppose Harbour uses a traditional costing system with machine hours as the cost driver. Determine the amount of overhead assigned to each product line. (Do not round your intermediate calculations.)
2. Calculate the production cost per unit for each of Harbour’s products under a traditional costing system. (Round your intermediate calculations and final answers to 2 decimal places.)
3. Calculate Harbour’s gross margin per unit for each product under the traditional costing system.(Round your intermediate calculations and final answers to 2 decimal places.)
4. Select the appropriate cost driver for each cost pool and calculate the activity rates if Harbour wanted to implement an ABC system.
5. Assuming an ABC system, assign overhead costs to each product based on activity demands.
6. Calculate the production cost per unit for each of Harbour’s products in an ABC system. (Round your intermediate calculations and final answers to 2 decimal places.)
7. Calculate Harbour’s gross margin per unit for each product under an ABC system. (Round your intermediate calculations and final answers to 2 decimal places.)
8. Compare the gross margin of each product under the traditional system and ABC. (Round your answers to 2 decimal places.)

Answers

Answer:

Harbour Company

1. Overhead rate, using traditional costing system with machine hours as the cost driver:

Predetermined rate = $175,200/3,000 = $58.40

Overhead Cost assigned to each product:

                                      Home            Work

Expected production   1,700              1,300

Cost assigned =         $99,280      $75,920

2. Production cost per unit:

                                              Home                        Work

Expected production            700 units                   400 units

Direct materials cost $21,000 (30 * 700)     $19,200 (48 * 400)

Direct labor cost          14,000 (20 * 700)       12,000 (30 * 400)

Overhead cost            99,280                        75,920

Total costs               $134,280                     $107,120

Cost per unit             $191.83                       $267.80

3. Gross margin per unit:

                                      Home                        Work

Sales price per unit     $300.00                  $500.00

Cost price per unit          191.83                     267.80

Gross margin per unit  $108.17                   $232.20

4. Activity Rates, using ABC system:

Cost Pools:                          Cost Drivers                     Usage     Rates

Setup costs     $ 68,800  Number of setups                   100     $688

Quality control   58,400  Number of inspections           730     $80

Maintenance     48,000   Number of machine hours 3,000     $16

5. Assignment of overhead costs to each product, using ABC:

                                         Rate      Home                        Work

Setup costs     $ 68,800  $688  $28,896 (42* $688) $39,904 (58*$688)

Quality control   58,400  $80       27,200 (340*$80)     31,200 (390*$80)

Maintenance     48,000   $16       27,200 (1,700*$16)    20,800 (1,300*$16)

Total overhead $175,200         $104,096                      $91,904

6. Production costs:

                                              Home                        Work

Expected production            700 units                   400 units

Direct materials cost $21,000 (30 * 700)     $19,200 (48 * 400)

Direct labor cost          14,000 (20 * 700)       12,000 (30 * 400)

Overhead cost          104,096                         91,904

Total costs              $139,096                      $123,104

Cost per unit             $198.71                        $307.76

7. Gross margin per unit:

                                      Home                        Work

Sales price per unit     $300.00                  $500.00

Cost price per unit         198.71                       307.76

Gross margin per unit $101.29                    $192.24

8. Gross margins per unit compared:

                                              Home                        Work

Traditional costing system  $108.17                   $232.20

ABC costing system           $101.29                    $192.24

ABC system looks more equitable than the traditional costing system as the gross margin per unit is reduced for each product line.

Explanation:

a) Data and Calculations:

                                                      Home                Work

Direct materials cost per unit          30                     48

Direct labor cost per unit                 20                     30

Sales price per unit                        300                   500

Expected production per month   700 units          400 units

Monthly overhead costs = $175,200

Cost Pools:                          Cost Drivers

                                                                                     Home      Work    Total

Setup costs     $ 68,800  Number of setups                  42          58       100

Quality control   58,400  Number of inspections         340        390      730

Maintenance     48,000   Number of machine hours 1,700     1,300   3,000

Total             $ 175,200

CMN Inc. uses LIFO and has experienced increasing costs since its founding. CMN disclosed that the LIFO reserve (also known as the LIFO allowance) at the end of 2021 was $3 million. The balance sheet showed ending inventory of $17 million at the end of 2021. What would the ending inventory have been if CMN had always used FIFO

Answers

Answer:

$20 million

Explanation:

FIFO inventory = LIFO inventory + LIFO reserve

FIFO inventory = $17 million + $3 million

FIFO inventory = $20 million

If CMN had always used FIFO,  the ending inventory will have been $20 million.

Carmelita Inc., has the following information available:

Costs from Beginning Inventory Costs from current Period
Direct materials $5,800 $22,200
Conversion costs 6,400 149,800

At the beginning of the period, there were 600 units in process that were 42% complete as to conversion costs and 100% complete as to direct materials costs. During the period, 4,700 units were started and completed. Ending inventory contained 300 units that were 35% complete as to conversion costs and 100% complete as to materials costs. The company uses the FIFO process cost method. Round cost per unit figures to two cents, i.e., $2.22, when calculating total costs.

The total costs that will be transferred into Finished Goods for units started and completed were:________

a. $165,932
b. $111,174
c. $237,666
d. $178,696

Answers

Answer:

Carmelita Inc.

The total costs that will be transferred into Finished Goods for units started and completed were:________

$168,777.00

Explanation:

a) Data and Calculations:

                                       Direct Materials   Conversion

Beginning Inventory              $5,800             $6,400

Costs from current period   22,200             149,800

Total costs of production  $28,000           $156,200

Equivalent units of production:

                                       Units    Direct Materials   Conversion

Beginning Inventory         600                    0                348 (58%)

Started and completed 4,700          4,700 (100%)    4,700 (100%)

Ending Inventory             300              300 (100%)       105 (35%)

Total equivalent units                       5,000               5,153

Cost per equivalent unit:

                                       Direct Materials   Conversion

Total costs of production  $28,000           $156,200

Total equivalent units            5,000                  5,153

Cost per equivalent unit        $5.60               $30.31

Costs assigned to units:

                                       Direct Materials   Conversion        Total

Beginning Work in Process      $0             $10,547.88         $10,547.88

Started and completed      $26,320          142,457.00         168,777.00

Ending Work in Process          1,680              3,182.55            4,862.55

Total costs assigned          $28,000          $156,188           $184,187.43

Journalizing Transactions in Template, Journal Entry Form, and T-Accounts Creative Designs, a firm providing art services for advertisers, began business on June 1, 2015.
The following transactions occurred during the month of June.
June 1: Anne Clem invested $12,000 cash to begin the business in exchange for common stock.
June 2: Paid $950 cash for June rent.
June 3: Purchased $6,400 of office equipment on account.
June 6: Purchased $3,800 of art materials and other supplies; paid $1,800 cash with the remainder due within 30 days.
June 11: Billed clients $4,700 for services rendered.
June 17: Collected $3,250 cash from clients on their accounts.
June 19: Paid $3,000 cash toward the account for office equipment suppliers (see June 3).
June 25: Paid $900 cash for dividends.
June 30: Paid $350 cash for June utilities.
June 30: Paid $2,500 cash for June salaries.
a. Record the below transactions for June using the financial statement effects template.
b. Record the transactions for June in journal entry form.
c. Post the transactions to the appropriate T-accounts. (For each T-account, enter answers in the in the first available space debit or credit space, as appropriate.)
Note: Use negative signs with your answers.

Answers

Answer:

Creative Designs

a. Financial Statement Effects Template:

June 1:

Assets (Cash +$12,000) = Liabilities + Equity (Common Stock +$12,000)

June 2:

Rent Expense $950 Cash $950

Assets (Cash -$950) = Liabilities + Equity (Retained Earnings - $950)

June 3:

Office Equipment $6,400 Accounts Payable $6,400

Assets (Office Equipment +$6,400) = Liabilities (Accounts payable +$6,400) = Equity

June 6:

Art Materials & Other Suppliers $3,800 Cash $1,800 Accounts Payable $2,000

Assets (Supplies +$3,800 Cash -$1,800) = Liabilities (Accounts payable +$2,000) = Equity

June 11:

Accounts Receivable $4,700 Service Revenue $4,700

Assets (Accounts Receivable +$4,700) = Liabilities + Equity (Retained Earnings +$4,700)

June 17:

Cash $3,250 Accounts Receivable $3,250

Assets (Cash +$3,250 Accounts Receivable -$3,250) = Liabilities + Equity

June 19:

Accounts Payable $3,000 Cash $3,000

Assets (Cash -$3,000) = Liabilities (Accounts payable -$3,000) + Equity

June 25:

Dividends $900 Cash $900

Assets (Cash -$900) = Liabilities + Equity (Retained Earnings -$900)

June 30:

Utilities Expense $350 Salaries Expense $2,500 Cash $2,850

Assets (Cash -$2,850) = Liabilities + Equity (Retained Earnings -$2,850)

b. Journal Entries:

June 1:

Debit Cash $12,000

Credit Common Stock $12,000

To record the issuance of common stock.

June 2:

Debit Rent Expense $950

Credit Cash $950

To record the payment of rent expense for the month.

June 3:

Debit Office Equipment $6,400

Credit Accounts Payable $6,400

To record the purchase of office equipment on account.

June 6:

Debit Art Materials & Other Suppliers $3,800

Credit Cash $1,800

Credit Accounts Payable $2,000

To record the purchase of supplies for cash and on account.

June 11:

Debit Accounts Receivable $4,700

Credit Service Revenue $4,700

To record the earning of revenue for services rendered.

June 17:

Debit Cash $3,250

Credit Accounts Receivable $3,250

To record the collection of cash from customers on account.

June 19:

Debit Accounts Payable $3,000

Credit Cash $3,000

To record payment to suppliers on account.

June 25:

Credit Dividends $900

Credit Cash $900

To record the payment of cash dividends.

June 30:

Debit Utilities Expense $350

Debit Salaries Expense $2,500

CreditCash $2,850

To record the payment of expenses.

c. June 1:

Cash

Account Titles        Debit      Credit

Common Stock      $12,000

Rent Expense                         $950

Art Materials & Suppliers       1,800

Accounts receivable 3,250

Accounts Payable                 3,000

Dividends                                900

Utilities Expense                     350

Salaries Expense                 2,500

Common Stock

Account Titles        Debit      Credit

Cash                                    $12,000

June 2:

Rent Expense

Account Titles        Debit      Credit

Cash                      $950

June 3:

Office Equipment

Account Titles        Debit      Credit

Accounts Payable  $6,400

Accounts Payable

Account Titles        Debit      Credit

Office Equipment               $6,400

Art materials & supplies      2,000

Cash                     $3,000

June 6:

Art Materials & Other Suppliers

Account Titles        Debit      Credit

Cash                        $1,800

Accounts Payable   2,000

June 11:

Accounts Receivable

Account Titles        Debit      Credit

Service Revenue $4,700

Cash                                    $3,250

Service Revenue

Account Titles        Debit      Credit

Accounts Receivable          $4,700

June 25:

Dividends

Account Titles        Debit      Credit

Cash                      $900

June 30:

Utilities Expense

Account Titles        Debit      Credit

Cash                     $350

Salaries Expense

Account Titles        Debit      Credit

Cash                     $2,500

Explanation:

a) Data and Calculations:

June Transactions:

June 1:

Cash $12,000 Common Stock $12,000

June 2:

Rent Expense $950 Cash $950

June 3:

Office Equipment $6,400 Accounts Payable $6,400

June 6:

Art Materials & Other Suppliers $3,800 Cash $1,800 Accounts Payable $2,000

June 11:

Accounts Receivable $4,700 Service Revenue $4,700

June 17:

Cash $3,250 Accounts Receivable $3,250

June 19:

Accounts Payable $3,000 Cash $3,000

June 25:

Dividends $900 Cash $900

June 30:

Utilities Expense $350

Salaries Expense $2,500

Cash $2,850

A firm is considering three capacity alternatives: A, B, and C. Alternative A would have an annual fixed cost of $105000 and variable costs of $24 per unit. Alternative B would have annual fixed costs of $126000 and variable costs of $25 per unit. Alternative C would have fixed costs of $82000 and variable costs of $37 per unit. Revenue is expected to be $52 per unit.

a. Which alternative has the lowest break-even quantity?
b. Which alternative will produce the highest profits for an annual output of 10,000 units?
c. Which alternative would require the lowest volume of output to generate an annual profit of $50,000?

Answers

Solution :

                                      Alternative A          Alternative B            Alternative C

Annual fixed cost          105000                  126000                        82000

Variable fixed cost         24                             25                                  37

a). We have to find out the Break even quantity :

   Break Even quantity for A    [tex]$=\frac{\text{annual fixed cost}}{(\text{price - variable cost per unit})}$[/tex]

                                                [tex]$=\frac{105000}{52-24}$[/tex]

                                                = 3750 units

   Break Even quantity for B    [tex]$=\frac{\text{annual fixed cost}}{(\text{price - variable cost per unit})}$[/tex]

                                                [tex]$=\frac{126000}{52-25}$[/tex]

                                                = 4666 units

   Break Even quantity for C    [tex]$=\frac{\text{annual fixed cost}}{(\text{price - variable cost per unit})}$[/tex]

                                                [tex]$=\frac{82000}{52-37}$[/tex]

                                                = 5466 units

Therefore, Alternate A has the lowest Break Even quantity.

b). Now,

[tex]$\text{Profit} = (\text{price - variable cost per unit}) \times \text{units to sell - total fixed cost}$[/tex]

[tex]$\text{Profit of A} = (52 - 24) \times 10000 - 105000$[/tex]

                = 280,000 - 105,000

                = 175,000

[tex]$\text{Profit of B} = (52 - 25) \times 10000 - 126000$[/tex]

                = 270,000 - 126,000

                = 144,000

[tex]$\text{Profit of C} = (52 - 37) \times 10000 - 82000$[/tex]

                = 150,000 - 105,000

                = 45,000  

Thus, alternate A has the highest amount of profit.

c).

[tex]$\text{Units of target profit = break even quantity} + \frac{\text{target profit} }{(\text{price - variable cost per unit })}$[/tex]

Units of the target profit for A  [tex]$=3750 + \frac{50000}{52-24}$[/tex]

                                                 = 5535 units

Units of the target profit for B  [tex]$=4666 + \frac{50000}{52-25}$[/tex]

                                                 = 6517 units

Units of the target profit for C  [tex]$=5466 + \frac{50000}{52-37}$[/tex]

                                                 = 8799 units

Thus Alternative A will require the lowest volume of the output.

Orange Cable TV Company, an accrual basis taxpayer, allows its customers to pay by the year in advance ($600 per year) or two years in advance ($960). In September 2020, the company collected the following amounts applicable to future services:

October 2020-September 2022 services (200 two-year contracts) $192,000
October 2020-September 2021 services (200 one-year contracts) 120,000
Total $312,000

As a result of this, Orange Cable should report as gross income for 2021, the year following receipt:

a. $54,000
b. $78,000
c. $258,000
d. $312.000

Answers

Answer:

Orange Cable TV Company

As a result of this, Orange Cable should report as gross income for 2021, the year following receipt:

$186,000

Explanation:

a) Data and Calculations:

Annual subscriptions = $600 per year

Two-years subscriptions = $960

September 2020 collections:

October 2020-September 2022 services (200 two-year contracts) = $192,000

Monthly subscriptions = $192,000/24 = $8,000

October 2020-September 2021 services (200 one-year contracts) = 120,000

Monthly subscriptions = $120,000/12 = $10,000

Total =  $312,000

Collections for 2021:

a. Monthly subscriptions of $8,000 * 12 = $96,000

b. Monthly subscriptions of $10,000 * 9 =   90,000

Total collections for 2021 = $186,000

Consider the following information:

c is the consumption profile, w is the wage or labor earnings profile, and line a-a is the initial wage profile. Suppose there is an announced change in tax policy of a tax cut, area c, and a tax increase later, area d. What is the impact of this policy on consumption if the change in policy is believed by the consumer at the beginning of their planning horizon?

Answers

Answer:

The individual will plan to spend or consume more of his wages than usual; since he believes there'll be a tax cut.

Explanation:

C = consumption

W = wages

Note: No graph is attached to the question so we can't make use of certain information in the question.

Suppose there is an announced change in tax policy - a tax cut/reduction - and a tax increase later; what is the impact of this policy on consumption if the consumer believes that the policy will be implemented?

Reasoning as an economist, the first reaction of a rational consumer is to begin to consume more since he believes the tax reduction policy will be implemented.

NOTE that sometimes the government or financial ministry in a country intentionally announce policies just so citizens can begin adjusting their consumption and investment patterns in line with them. They do not necessarily follow up with implementation of the policies.

So for a consumer who believes that there'll be a tax cut, he'll be excited and will either consume more of his present wage or consume all and borrow or dissave.

Payment for goods purchased should be vouched with the help of______​

Answers

Answer:

Payment for goods purchased should be vouched with the help of Creditors statement.

Hope this helps you. Do mark me as brainliest.

How should sales promotion decisions be made?

Answers

Answer:

By how they work and how they are in their field

The ledger account balances for Concord Corporation at December 31, 2022 are as follows: Cash $320 Accounts Receivable 700 Prepaid Insurance 88 Supplies 270 Equipment 4800 Accumulated Depreciation, Equipment 770 Accounts Payable 394 Common Stock 1330 Retained Earnings 1560 Service Revenue 3200 Salaries and Wages Expense 2300 Rent Expense 620 If all accounts have normal balances, what would be total debits on the trial balance at December 31, 2022

Answers

Answer:

$9,098

Explanation:

Trial Balance at December 31, 2022

Account Name                           Debit

Cash                                            $320

Accounts receivable                   $700

Prepaid insurance                       $88

Supplies                                       $270

Equipment                                    $4,800

Salaries and wages expense      $2,300

Rent expense                               $620

Total Debits                                  $9,098

Note: All expense and assets have debit balances while all liabilities, revenue and owners equity have credit balance.

What type of risks are considered accidental and unintentional?
a) speculative risks
b) uninsured risks
c) classified risks
d) pure risks

Answers

Answer:

Pure risk

Explanation:

pure risk means it cannot be controlled and has two outcomes, therefore it is accidental and unintentional.

Pure risks is the  type of risks are considered accidental and unintentional. It is inadvertent and unplanned since it cannot be controlled and has two outcomes.

What is pure risk?

Pure risk is an uncontrollable risk with only two outcomes: entire loss or no loss at all. When pure risk is involved, there are no options for gain or profit.

Natural disasters, fires, and death are all instances of situations where there is a high level of risk.

Thus, option D is correct.

For more details about Pure risks, click here

https://brainly.com/question/5307837

#SPJ2

Madison's gross tax liability is $11,450. Madison had $3,030 of tax credits available and she had $10,650 of taxes withheld by her employer. What are Madison's taxes due (or taxes refunded) with her tax return

Answers

Answer:

the madison taxes refunded is -$2,230

Explanation:

The computation of the madison taxes due is shown below:

= Gross tax liability - tax credits available - taxes withheld by the employer

= $11,450 - $3,030 - $10,650

= -$2,230

Hence, the madison taxes refunded is -$2,230

A project has 70% probability of doubling your investment in a year and 30% probability of halving your investment in a year. What is the expected rate of return on this investment

Answers

Answer:

1.55

Explanation:

When the investment is doubled the return would be 100% and when it is halved, the return would be -50%.

Probability Return

70%             2*100 = 200

30%             0.5*100 = 50

Expected Return = Probability of Doubling Investment*Rate of Return on Doubling of Investment + Probability of Halving Investment*Rate of Return on Halving of Investment

Expected Return = 70%*200% + 30%*50%

Expected Return = 0.7*200% + 0.3*50%

Expected Return = 1.4 + 0.15

Expected Return = 1.55

An undergraduate business student has purchased a laptop computer for use during exams. This laptop is perfectly reliable except for two parts: its microchip, which has a failure rate of one in every twenty hours of operation; and its battery, which has a failure rate of one in every ten hours of operation. Also, on average the battery will wear out in five hours, with a standard deviation of 30 minutes. Assuming that a new battery has just been installed, what is the probability that the laptop will perform reliably during a one-hour exam?

Answers

Answer:

probability of a reliable performance = 19/20

Explanation:

If a new battery has just been installed, then the chances of failure are only contributed by the faulty microchip, which has a failure rate of 1 in 20 hours.

Therefore in 1 hour, the probability that the laptop will perform reliably is calculated as follows:

Chances of failure = 1 in 20

20 hours = 1 chance of failure

∴ 1 hour = 1/20 chance of failure

1/20 = 0.05 chance of failure

Now, let us express 0.05 as fraction:

0.05 = 5/100

Therefore in 1 hour, there is a 5 in 100 chances of failure.

But we are asked to find the probability that the laptop will perform reliably. This is simply done by finding the difference between the total chances of occurrence (100)  and the chances of failure (5)

∴ Probability of reliable performance in one hour = (100 - 5) / 100

= 95/100

95/100 = 19/20

If nominal GDP in 2014 is $20,000 billion while real GDP is $16,000 billion, then the GDP deflator in 2014 is

Answers

Answer:

125

Explanation:

Calculation for GDP deflator in 2014

Using this formula

2014 GDP deflator=nominal GDP /real GDP*100

Let plug in the formula

2014 GDP deflator=$20,000 billion/$16,000 billion*100

2014 GDP deflator=125

Therefore GDP deflator in 2014 is 125

On January 1, an investment account is worth 50,000. On May 1, the value has increased to 52,000 and 8,000 of new principal is deposited. At time t, in years, (4/12

Answers

The question is incomplete. The complete question is :

On January 1, an investment account is worth 50,000. On May 1, the value has increased to 52,000 and 8,000 of new principal is deposited. At time t, in years, (4/12 < t < 1) the value of the fund has increased to 62,000 and 10,000 is withdrawn. On January 1 of the next year, the investment account is worth 55,000. The approximate dollar-weighted rate of return (using the simple interest approximation) is equal to the time-weighted rate of return for the year. Calculate t.

Solution :

It is given that :

Worth of investment account on 1st Jan = 50,000

Worth of investment account on 1st Jan next year = 55,000

New principal deposited = 8000

Therefore the interest earned = 55,000 - 50,000 - 8,000 + 10,000

                                                  = 7,000

Therefore,

[tex]$\frac{7000}{\frac{50000+16000}{3-10000(1-t)}}= \frac{52}{50} \frac{62}{60} \frac{55}{52} - 1$[/tex]

                   = 0.13667

7000 = 0.13667(55,333.33 - 10000 + 10000t)

[tex]$t=\frac{7000-0.13667(45333.33)}{1366.7}$[/tex]

    = 0.5885

Thus, time - weighted rate of the return = 0.5885

Grouper Inc. has decided to raise additional capital by issuing $199,000 face value of bonds with a coupon rate of 6%. In discussions with investment bankers, it was determined that to help the sale of the bonds, detachable stock warrants should be issued at the rate of one warrant for each $100 bond sold. The value of the bonds without the warrants is considered to be $179,100, and the value of the warrants in the market is $23,880. The bonds sold in the market at issuance for $200,900.

Required:
a. What entry should be made at the time of the issuance of the bonds and warrants?
b. Prepare the entry if the warrants were nondetachable.

Answers

Answer:

A. Dr Cash 152,000

Dr Discount on bonds payable 40,800

Cr Bond Payable 170,000

Cr Paid-in Capital-Stock Warrants 22,800

B. Dr Cash 152,000

Dr Discount on bonds payable 18,000

Cr Bond Payable 170,000.00

Explanation:

A. Calculation for the Journal entry that should be made at the time of the issuance of both the bonds and warrants

Dr Cash $200,900

Dr Discount on bonds payable $21,735

($199,000 - $177,265)

Cr Bond Payable $199,000

Cr Paid-in Capital-Stock Warrants $23,605

(b) Preparation of the journal entry in a situation were the warrants were nondetachable.

Dr Cash $200,900

Cr Discount on bonds payable $1900

($199,000-$200,900)

Cr Bond Payable $199,000

Workings:

Value assigned to bonds=179,100/($179,100+$23,880)

*$200,900

Value assigned to bonds=179,100/$202,980

*$200,900

Value assigned to bonds=$177,265

Value assigned to warrants=$23,880/$202,980*$200,900

Value assigned to warrants=$23,605

receives feedback from customers about the type of service they received
when they were in the store and compares the feedback to company's goal for
customer service. Which strategic management function is most likely using

Answers

Answer:

Explanation:

Strategic Plan: Product differentiation

Tactical Plan: Increase customer satisfaction

Operational Plan:  Improve customer service with hiring and training program for customer service associates.

Hope this helps!


An increase in the number of consumers in the market for chocolate would ?

Answers

Answer:

lead to more money

Explanation:

Marjorie Knaus, an architect, organized Knaus Architects on January 1, 2018. During the month, Knaus Architects completed the following transactions:

a. Issued common stock to Marjorie Knaus in exchange for $51,000.
b. Paid January rent for office and workroom, $5,100.
c. Purchased used automobile for $33,000, paying $7,700 cash and giving a note payable for the remainder.
d. Purchased office and computer equipment on account, $10,200.
e. Paid cash for supplies, $2,450.
f. Paid cash for annual insurance policies, $3,400.
g. Received cash from client for plans delivered, $12,800.
h. Paid cash for miscellaneous expenses, $1,380.
i. Paid cash to creditors on account, $2,960.
j. Paid installment due on note payable, $410.
k. Received invoice for blueprint service, due in August, $1,700.
l. Recorded fees earned on plans delivered, payment to be received in August, $8,800.
m. Paid salary of assistants, $2,700.
n. Paid gas, oil, and repairs on automobile for July, $660.

Required:
a. Record these transactions directly in the following T accounts, without journalizing: Cash; Accounts Receivable; Supplies; Prepaid Insurance; Automobiles; Equipment; Notes Payable; Accounts Payable; Common Stock; Professional Fees; Salary Expense; Blueprint Expense; Rent Expense; Automobile Expense; Miscellaneous Expense. To the left of the amount entered in the accounts, select the appropriate letter to identify the transaction.
b. Determine account balances of the T accounts. Accounts containing a single entry only (such as Prepaid Insurance) do not need a balance.
c. Prepare an unadjusted trial balance for Knaus Architects as of January 31, 2018.
d. Determine the net income or net loss for January.

Answers

Answer:

Unadjusted Trial Balance $117,590.

Explanation:

Unadjusted Trial Balance of Marjorie Knaus :

Debit

Cash 36,400

Accounts Receivable 20,600

Supplies 2,450

Prepaid Insurance 3,400

Automobiles 33,000

Equipment 10,200

Salary Expense 2,700

Blue Print Expense 1,700

Rent Expense 5,100

Automobile Expense 660

Miscellaneous Expense 1,380

Total 117,590

Credit

Notes Payable 25,300

Accounts Payable 7,240

Common Stock 51,000

Professional Fees 34,050

Total 117,590

Someone whose career is in the Human Services career cluster and who works with children on a daily basis is most likely a...

Science Teacher.
Nanny.
Football Coach.
Librarian.

Answers

My guess would be a Nanny, since they work with children a lot, hope this helped.

Answer: B.) Nanny because that the only person that will mostly take care of the kids.

Cain Components manufactures and distributes various plumbing products used in homes and other buildings. Over time, the production staff has noticed that products they considered easy to make were difficult to sell at margins considered reasonable while products that seemed to take a lot of staff time were selling well despite recent price increases. A summer intern has suggested that the cost system might be providing misleading information. The controller decided that a good summer project for the intern would be to develop,in one self-contained area of the plant, an alternative cost system with which to compare the current system. The intern identified the following cost pools and, after discussion with some plant personnel, appropriate cost drivers for each pool. There were:

Cost Pools Costs Activity Drivers
Receiving $600,000 Direct material cost
Manufacturing 5,500,000 Machine-hours
Machine setup 900,000 Production runs
Shipping $1,000,000 Units shipped

In this particular area, Cain produces two of its many products: Standard and Deluxe.The following are data for production for the latest full year of operations:

Standard Deluxe
Total direct material costs $245,000 $155,000
Total direct labor costs $650,000 $250,000
Total machine-hours 150,000 100,000
Total number of setups 75 125
Total pounds of material 18,000 9,000
Total direct labor-hours 6,000 3,750
Number of units produced and shipped 20,000 5,000

The intern decides to look more closely at the manufacturing activity and determines that it can be broken down into two activities: production and engineering. Production covers the costs of ongoing manufacturing while engineering includes those activities dealing with engineering changes, design modifications, and so on.

The costs attributed to production are $3,300,000 and the costs attributed to engineering are $2,200,000. After discussion with plant engineers, the intern decides that the best cost driver for engineering is setups, because most of the work arises from changes in the way the product is run.

Required:
a. Compute the totals of the cost driver rates.
b. What unit product costs will be reported for the two products if the revised ABC system is used?

Answers

Solution :

                                                       Standard               Deluxe          Total

Total cost of direct material           245000               155000        400000

Total cost of direct labor                650000               250000       900000

Total machine hours                       150000                100000       250000

Total setups                                         75                        125             200

Total material pounds                     18000                  9000            27000

Total direct hours of labor               6000                   3750             9750

No. of units shipped                       20000                    5000            25000

a). Cost drivers rates :

Receiving                               150                    Percentage of materials(dollars)  

                                    [tex]$\left(600000 \times \frac{100}{400000}\right)$[/tex]

Manufacturing                        13.20                Per machine hour

                                              [tex]$\frac{3300000}{250000}$[/tex]

Engineering                          11000                  Per set up

                                              [tex]$\frac{2200000}{200}$[/tex]

Machine set up                        4500                per set up

                                               [tex]$\frac{900000}{200}$[/tex]

Shipping                                     40                   per unit

                                             [tex]$\frac{1000000}{25000}$[/tex]

b). Units product cost

                                         Standard                                      Deluxe

Direct cost                        895000                                      405000

                                (245000+650000)                      (155000+250000)  

Overhead :

Receiving                         367500                                       232500

                                  (245000 x 150%)                         (155000 x 150%)

Manufacturing                1980000                                      1320000

                                   (150000 x 13.2)                             (100000 x 13.2)

Engineering                    825000                                         1375000

                                    (75 x 11000)                                   (125 x 11000)

Machine set up              337500                                           562500

                                     (75 x 4500)                                     (125 x 4500)

Shipping                         800000                                             200000

                                      (20000 x 40)                                   (5000 x 40)

Total costs                   5205000                                             4095000

No of units                     20000                                                5000

Unit cost                       260.25                                                   819

                               (5205000/20000)                               (4095000/5000)

On June 1, 2018, Stellar Company and Pearl Company merged to form Martinez Inc. A total of 733,000 shares were issued to complete the merger. The new corporation reports on a calendar-year basis. On April 1, 2020, the company issued an additional 577,000 shares of stock for cash. All 1,310,000 shares were outstanding on December 31, 2020. Martinez Inc. also issued $600,000 of 20-year, 8% convertible bonds at par on July 1, 2020. Each $1,000 bond converts to 42 shares of common at any interest date. None of the bonds have been converted to date. Martinez Inc. is preparing its annual report for the fiscal year ending December 31, 2020. The annual report will show earnings per share figures based upon a reported after-tax net income of $1,475,000. (The tax rate is 20%.) Determine the following for 2020.

a. The number of shares to be used for calculating:_______
b. The earnings figures to be used for calculating: ________

Answers

Answer:

a. The number of shares to be used for calculating:_______

basic EPS = 733,000 + (577,000 x 9/12) = 1,165,750 sharesdiluted EPS = 1,165,750 + (600,000/1,000 x 42) = 1,190,950  

b. The earnings figures to be used for calculating: ________

basic EPS = net income = $1,475,000diluted EPS = $1,475,000 + ($600,000 x 8%) - (20% x $600,000 x 8%) = $1,475,000 + $48,000 - $9,600 = $1,513,400

Johnson Inc. is a job-order manufacturing company that uses a predetermined overhead rate based on direct labor hours to apply overhead to individual jobs. For the current year, estimated direct labor hours are 95,000 and estimated factory overhead is $617,500. The following information is for September of the current year. Job A was completed during September, and Job B was started but not finished.

September 1 inventories

Material inventory $7500
Work in process inventory (All Job A) $31,200
Finished goods inventory $67,000
Material purchases $104,000
Direct materials requisitioned Job A $65000 Job B $33500
Direct labor hours Job A $4200 Job B $3500
Labor Costs incurred Direct labor($8.50/hour) $65450
Indirect labor $13500
Supervisory salaries $6000
Rental cost Factory $7000
Administrative offices $1800
Total equipment depreciation costs Factory 7500
Administrative office 1600
Indirect material uses 12000

Required:
a. What is the total cost of Job A
b. What is the total factory overhead applied during September?
c. What is the overapplied or underapplied for September?

Answers

Answer:

See below

Explanation:

1. Total cost of job A

Direct materials requisition $65,000

Add direct labor cost $65,450

(4,200 × $8.5)

Add applied overheads

Other Questions
Select all shapes that have a volume of \small 36\pi cubic units. a b c d e f g Help..!!Fill in the blanks with appropriate articles.. Right answers will be marked as brainliest..! Answer all the questions..! What is the value of x? X - 9 = 21 Why does the stomach have three layers of muscle? Write the cautions which are taken to keep the magnetic properties of magnetsa) Dont hammer it b) dont drop it c) dont heat it d) all of thesePLS HELP GUYS ITS URGENTTT!! I AM IN CLASS ...PLEASE!! PLS I NEED HELP THIS IS DUE TODAY What is the area of this rectangle? (help!) What is the relationship between the ratios of the Perimeter and the ratios of the Area?Perimeter Area 2:3 4:9 3:5 9:25 round 8.456 to the nearest tenth They are seldom unjust, and have a greater abhorrence of injustice than any other people. Their sultan shows no mercy to anyone who is guilty of the least act of it. There is complete security in their country. Neither traveler nor inhabitant in it has anything to fear from robbers or men of violence.What is Malis greatest characteristic, according to Ibn Battuta? Meiosis does PMAT twice! That means there is prophase I and prophase II. There is metaphase I and metaphase II. Etc If the cartoon below has chromosomes in the middle of the cell, how would you know whether it was in metaphase I or metaphase II THIS IS A HARRY POTTER QUESTION. 1. HOW DO YOU SPELL LUNA LOVEGOOD'S DAD?2. WHAT ARE HERMIONE'S PARENTS' NAMES?3. WHAT ARE THE 7 HORCRUXESWHOEVER GETS THE ANSWER RIGHT WILL BE MARKED AS BRAINLIEST! Most countries in the world have laws governing email content.Give three examples of these laws. Find the missing value.Hint: Use the number line to find the missing value.a-2=+6-15-10-5051015 A long whip-like tail used to move and/or catch food Pseudopod Cilia Flagellum Qu relacin tienen las Dictadura latinoamericanas con la Guerra Fra y el comercio? 04 What is the pressure 40m under the sea if sea water has a density of 1100kg/m3? (atmospheric pressure is 101kPa) How long will it take for a 1.5A current to coat evenly a layer of copper 0.1mm thick on both sides of a 12cm x 12cm copper plate [e.C.E of copper= 0.00033g/C , density of copper 9g/cm x 9 = 4? I need it for my Math Work 1. Which word goes best with recklessness? Why? 2. Which word goes best with understanding? Why? l 3. Which word goes best with being lost in thought? Why? 4. Which word goes best with a calm personality? Why?word bank: abandonment. vacant. illumination. composed