Tariq bought 3 bags of oranges the mass of watch bag was 3 1/3 kilograms how many kilograms of oranges did Tariq buy

The probability that the sum of the throw is divisible by 4 but greater than 7 is 17 / 36.

There are 36 possible outcomes when two dice are tossed.

The sum of the dice can be any number from 2 to 12. The sum is divisible by 4 when the sum is 4, 8, or 12. The sum is greater than 7 when the sum is 8 , 9 , 10 , 11, or 12.

There are 3 ways to get a sum of 4, 3 ways to get a sum of 8, 2 ways to get a sum of 12, 4 ways to get a sum of 9, 4 ways to get a sum of 10, and 1 way to get a sum of 11.

The probability of getting a sum that is divisible by 4 or greater than 7 is:

= ( 3 + 3 + 2 + 4 + 4 + 1 ) / 36

= 17 / 36

Find out more on probability at https://brainly.com/question/23955312

#SPJ1

1. The value of a.b is -152.2.

2. The value of dot product 3a.2b is 148.

1. First, let us calculate the dot product of the given vectors a and b which is also known as scalar product. So, it is obtained as follows;a.b = (-3 * 12) + (5 * -20) + (-2 * 8)= -36 - 100 - 16= -152

Therefore, the value of a.b is -152.2.

2. Calculation of 3a · 2b

Now, let us calculate the scalar triple product of the given vectors.

3a · 2b = 3[(2 * 5) - (-2 * -20)] + 2[(-3 * 12) - (5 * 8)]+ [(2 * -20) - (5 * -2)]3a · 2b

= 3[50 - (-40)] - 2[36 + 40] - [-40 - (-10)]3a · 2b

= 3[90] - 2[76] - [-30]3a · 2b

= 270 - 152 + 30

= 148

Therefore, the value of 3a · 2b is 148.

The scalar triple product of vectors is used to determine whether the three given vectors are coplanar or not. It is found that if the scalar triple product of three given vectors is equal to zero then the vectors are coplanar; otherwise, they are non-coplanar.

To know more about dot product click on below link:

https://brainly.com/question/23477017#

#SPJ11

Answer: The mid-point of the given line segment is (4,2,10).

Step-by-step explanation: We can find the mid-point of the line segment given to us by using the formula:

x=[tex]\frac{x_{1}+x_{2} }2}[/tex]

y=[tex]\frac{y_{1}+y_{2}}{2}[/tex]

z=[tex]\frac{z_{1}+z_{2}}{2}[/tex]

where x,y, and z are the coordinates of the mid-point of the line segment.

Now, [tex]{x_{1}[/tex]=2,[tex]{x_{2}[/tex]=6,[tex]{y_{1}[/tex]=0,[tex]{y_{2}[/tex]=4,[tex]{z_{1}[/tex]=-6,[tex]{z_{2}[/tex]=26

By substituting the values in the above formula we get,

x=(2+6)/2=4

y=(0+4)/2=2

z=(-6+26)/2=10

Thus, the mid-point of the given line segment is: (4,2,10)

To learn more about coordinate systems:

https://brainly.ph/question/5853904

The size of the interval in the histogram bins is too large.

We know that,

A histogram is defined as a display of statistical data that uses rectangles to indicate the frequency of information items in consecutive numerical intervals of equal size.

Here,

The size of the interval of the histogram's bins is too large. While observing the histogram, from the given information in the histogram, it cannot justify the true information regarding the fuel efficiencies of the trucks.

Thus, the size of the interval in the histogram is too large.

Learn more about histograms here:

brainly.com/question/16819077

#SPJ1

The complete question is attached below:

The values of the missing parts are;

WX = 2.2

<X = 24. 6 degrees

<W = 65.4 degrees

Using the Pythagorean theorem, we have that;

WX² = 2² + 1²

Find the value

WX² = 4 + 1

Add the values

WX = √5

WX = 2.2

Using the sine identity, we get;

sin θ = opposite/hypotenuse

substitute the values

sin W = 2/2.2

Divide the values

sin W = 0. 9090

Find the inverse

W = 65. 4 degrees

Then, we get;

X = 180 - 90 - 65.4

Subtract the values

X = 24. 6 degrees

Learn about triangles at: https://brainly.com/question/14285697

#SPJ1

The given sequent "((P-Q) & (RS)) ⊢ =(P&R) Qvs" is proved.

To prove the sequent ((P-Q) & (RS)) ⊢ =(P&R) Qvs, we will use natural deduction rules.

1. Assume ((P-Q) & (RS)) as the premise.

2. From (1), apply the ∧-elimination rule to get (P-Q).

3. From (1), apply the ∧-elimination rule to get (RS).

4. Assume P as a sub-derivation.

5. From (4), apply the →-intro rule to get (P→R).

6. From (5) and (2), apply the →-Elim rule to get R.

7. From (6), apply the ∧-intro rule to get (P&R).

8. Assume Q as a sub-derivation.

9. From (9) and (3), apply the →-intro rule to get (Q→S).

10. From (10) and (2), apply the →-Elim rule to get S.

11. From (11), apply the ∨-intro rule to get (Qvs).

12. From (7) and (12), apply the =-intro rule to get =(P&R) Qvs.

13. Discharge the assumptions made in steps 4 and 8.

14. Finally, discharge the assumption made in step 1.

Therefore, we have proven the sequent ((P-Q) & (RS)) ⊢ =(P&R) Qvs.

To know more about sequent refer here:

https://brainly.com/question/31967799#

#SPJ11

The points on the given curve x = 2t^3, y = 2 + 16t − 2t^2 on which the tangent line have slope 1 is (16, 24). The two points we're looking for are (2, y1) = (2, y(2)) and (6, y2) =  (432, -40).

From the given equations:

x = 2t^3 --> dx/dt = 6t^2 --> dt/dx = 1/(6t^2)

y = 2 + 16t - 2t^2 --> dy/dt = 16 - 4t

Using the chain rule:

dy/dx = (dy/dt) / (dx/dt) = (16 - 4t) / (6t^2)

We want to find the values of t such that dy/dx = 1:

(16 - 4t) / (6t^2) = 1

Simplifying:

2t^2 - 8t + 8 = 0

Dividing by 2:

t^2 - 4t + 4 = 0

So,

(t - 2)^2 = 0

The only solution is t = 2.

When t = 2:

x = 2(2^3) = 16

y = 2 + 16(2) - 2(2^2) = 24

So the point on the curve where the tangent line has slope 1 is (16, 24).

To find points with smaller and larger x-values, find the values of t that correspond to those x-values. So, we can solve for t using the equation  x = 2t^3:

t = (x/2)^(1/3)

So the two points we're looking for are:

(smaller x-value) = (2^3)^(1/3) = 2

(larger x-value) = (18^3)^(1/3) = 6

Plugging these values of t into the equation for y:

When t = 2, we found that y = 24.

When t = 6, we have:

x = 2(6^3) = 432

y = 2 + 16(6) - 2(6^2) = -40

So the two points we're looking for are (2, y1) = (2, y(2)) and (6, y2) =  (432, -40).

Know more about curve here:

https://brainly.com/question/29364263

#SPJ11

To calculate the limits below, we can use basic limit rules and arithmetic operations.

lim_(x->2) [f(x) + g(x)]

= lim_(x->2) f(x) + lim_(x->2) g(x) (by limit laws)

= 1 + (-4)

= -3

We can use the limit laws to add the limits of f(x) and g(x) since they are both approaching the same point, 2. Then, we can simply add the values of the limits to get the limit of their sum.

lim_(x->2) [g(x) - f(x)h(x)]

= lim_(x->2) g(x) - lim_(x->2) [f(x)h(x)] (by limit laws)

= -4 - [lim_(x->2) f(x)] [lim_(x->2) h(x)] (by limit laws and arithmetic operations)

= -4 - 1(0)

= -4



Again, we can use the limit laws to subtract the limit of f(x) multiplied by h(x) from the limit of g(x). To find the limit of f(x) multiplied by h(x), we can use the product rule for limits and multiply the limits of f(x) and h(x) together.

lim_(x->2) [g(x)/f(x)]

= [lim_(x->2) g(x)] / [lim_(x->2) f(x)] (by limit laws)

= -4 / 1

= -4



We can use the limit laws to divide the limit of g(x) by the limit of f(x) since they are both approaching the same point, 2.



The limits of [f(x) + g(x)], [g(x) - f(x)h(x)], and [g(x)/f(x)] as x approaches 2 are -3, -4, and -4, respectively.

To know more about divide visit :-

https://brainly.com/question/15381501

#SPJ11

Given that x has a normal distribution with mean µ = 100 and standard deviation σ = 18, the probability P(x ≥ 120) is to be determined.

The standardized value of x can be calculated as follows: z = (x - µ) / σHere, x = 120, µ = 100, and σ = 18.∴ z = (120 - 100) / 18 = 1.11From the standard normal distribution table, the probability P(Z ≥ 1.11) = 0.1335 (approx.)Thus, the main answer is option A. 0.1335 Probability P(x ≥ 120) can be calculated by standardizing x as follows: z = (x - µ) / σwhere µ is the mean and σ is the standard deviation.

Here,

we have: µ = 100,

σ = 18, and

x = 120∴

z = (120 - 100) / 18

= 1.11

Now, we can calculate the probability P(x ≥ 120) by using the standard normal distribution table as follows

:P(x ≥ 120)

= P(Z ≥ 1.11)

From the standard normal distribution table, we get:

P(Z ≥ 1.11)

= 0.1335 (approx.)

Therefore, the probability P(x ≥ 120) is 0.1335 (approx.)Thus, the main answer is option A. 0.1335.

To know more about distribution  visit:-

https://brainly.com/question/15090366

#SPJ11

The expected number of students in the selected student's class, E(X), is approximately 21.91.

To find the expected value (E) of the random variable X, which represents the number of students in the selected student's class, we need to calculate the weighted average of X over all possible values of X.

Let's denote the number of students in each class as X1, X2, and X3, where X1 = 20, X2 = 22, and X3 = 25.

The probability of selecting a student from class 1 is P(X = X1) = 20/67, as there are 20 students in class 1 out of a total of 67 students.

Similarly, the probabilities for class 2 and class 3 are P(X = X2) = 22/67 and P(X = X3) = 25/67, respectively.

Now, we can calculate the expected value E(X):

E(X) = X1 * P(X = X1) + X2 * P(X = X2) + X3 * P(X = X3)

= 20 * (20/67) + 22 * (22/67) + 25 * (25/67)

≈ 21.91

Therefore, the expected number of students in the selected student's class, E(X), is approximately 21.91.

Learn more about expected number  here:

https://brainly.com/question/23915989

#SPJ11

The solution to the given mathematical expression 3 7/12 - 1 11/12 is 1 8/12.

In Mathematics and Geometry, a fraction simply refers to a numerical quantity (numeral) which is not expressed as a whole number. This ultimately implies that, a fraction is simply a part of a whole number.

In order to solve the given mathematical expression, we would have to convert the mixed fraction into an improper fraction and then subtract them as follows;

Equation = 3 7/12 - 1 11/12

Equation = 43/12 - 23/12

Equation = (43 - 23)/12

Equation = 20/12

Equation = 1 8/12.

Read more on fraction here: brainly.com/question/29367657

#SPJ1

The volume of the region bounded above by  x² + y² + z² = 12 and bounded below by z=√x² + y² is

Given :

x² + y² + z² = 12 ⇒ z = √(12- (x² + y²))

z=√x² + y²

It is known that :

r = √(x² + y²)

So the z values range from r ≤ z ≤ √(12-r²)

Also 0 ≤ θ ≤ 2π

Setting,

12- (x² + y²) = √x² + y²

r = 12 - r²

r² + r - 12 = 0

(r - 3)(r + 4) = 0

Or r = 3

So the value of r range from 0 to 3.

In the cylindrical coordinates :

Volume = [tex]\int\limits^{2pi}_0 \int\limits^3_0 \int\limits^{12-r^2}_r {dzrdr} \, dtheta[/tex]

Simplifying,

Volume = 99π

Hence the required volume is 99π.

Learn more about Volume here :

https://brainly.com/question/30785714

#SPJ4

No, the data from the University of Illinois study do not provide convincing evidence at the α=0.05 level that the media report's claim is incorrect.

To determine if the University of Illinois study provides evidence against the media report's claim, we need to conduct a hypothesis test. The null hypothesis (H0) would be that the proportion of middle school students who engage in bullying behavior is 75%, as reported by the media. The alternative hypothesis (Ha) would be that the proportion is less than 75%.

Using the sample data from the University of Illinois study, we can calculate the sample proportion of students who admitted to engaging in bullying behavior in the last 30 days:

p^^ = 445/558 = 0.796

To test the hypothesis, we can use a one-sample proportion z-test with a significance level of α=0.05. The test statistic is:

z = (p^^ - p0) / sqrt(p0(1-p0)/n)

where p0 = 0.75 is the hypothesized proportion under the null hypothesis, and n = 558 is the sample size.

Plugging in the values, we get:

z = (0.796 - 0.75) / sqrt(0.75(1-0.75)/558) = 1.86

The critical value for a one-tailed test with α=0.05 is 1.645. Since the calculated z-value is greater than the critical value, we cannot reject the null hypothesis at the α=0.05 level. In other words, the sample data do not provide sufficient evidence to conclude that the proportion of middle school students who engage in bullying behavior is less than 75%, as claimed by the media report.

Therefore, we cannot say with certainty that the media report's claim is incorrect based on the University of Illinois study data alone. It is possible that the true proportion is 75%, but the sample proportion of 79.6% was due to chance variation. Alternatively, the true proportion could be slightly lower than 75%, but the sample size was not large enough to detect a significant difference. Further research is needed to confirm or refute the media report's claim.

To learn more about sample data click here, brainly.com/question/29453029

#SPJ11

Rounding to three decimal places, the correlation coefficient between cost and miles is approximately -0.398.

To calculate the correlation coefficient between cost and miles, we need to first calculate the mean of the cost and miles, as well as the standard deviations of each variable. Then we can use the formula for the correlation coefficient, which is:

correlation coefficient (r) = Σ((x_i - x_mean) * (y_i - y_mean)) / (n * x_std * y_std)

Let's calculate it step by step:

Calculate the mean of cost (x) and miles (y):

x_mean = (171 + 397 + 270 + 88 + 438) / 5 = 272.8

y_mean = (941 + 3093 + 2003 + 433 + 3019) / 5 = 1581.8

Calculate the standard deviation of cost (x) and miles (y):

x_std = sqrt(((171 - 272.8)^2 + (397 - 272.8)^2 + (270 - 272.8)^2 + (88 - 272.8)^2 + (438 - 272.8)^2) / 5) ≈ 131.150

y_std = sqrt(((941 - 1581.8)^2 + (3093 - 1581.8)^2 + (2003 - 1581.8)^2 + (433 - 1581.8)^2 + (3019 - 1581.8)^2) / 5) ≈ 968.294

Calculate the correlation coefficient (r):

r = ((171 - 272.8) * (941 - 1581.8) + (397 - 272.8) * (3093 - 1581.8) + (270 - 272.8) * (2003 - 1581.8) + (88 - 272.8) * (433 - 1581.8) + (438 - 272.8) * (3019 - 1581.8)) / (5 * 131.150 * 968.294)

r ≈ -0.398

Rounding to three decimal places, the correlation coefficient between cost and miles is approximately -0.398.

After performing the calculations, we find that the correlation coefficient between cost and miles is approximately -0.398. This means that there is a weak negative correlation between the cost of flights and the distance in miles. In other words, as the distance increases, the cost tends to slightly decrease.

Learn more about Costs

at brainly.com/question/31259207

#SPJ11

Given vectors [tex]`u = [6 -3 0]` and `v = [1 4 -5]`[/tex]and we have to find the vector [tex]`w = 7ũ - 40`[/tex] and its additive inverse. Solution: The vector `w = 7ũ - 40` can be obtained as follows:
[tex]`w = 7u - 40 = 7[6 -3 0] - 40 = [42 -21 0] - [40 40 40] = [42 -21 -40]`[/tex]The additive inverse of vector w is `-w` which can be obtained by changing the signs of all the entries of `w[tex]`. So, `-w = [-42 21 40]`[/tex]Therefore, the required vectors are:
[tex]`w = [42 -21 -40]` and `-w = [-42 21 40]`[/tex]

To know more about vectors visit:

brainly.com/question/14447709

#SPJ11

The series   [tex]$\sum_{n=1}^{\infty} \frac{n^2 + 1}{n^{10}}$[/tex] converges. The given series converges.

To test this series for convergence  [tex]$\sum_{n=1}^{\infty} \frac{n^2 + 1}{n^{10}}$[/tex] You could use the Limit Comparison Test, comparing it to the series

[tex]$\sum_{n=1}^{\infty} \frac{1}{n}$[/tex]  

where [tex]p=1 > 0$.[/tex]

Now, we will use the Limit Comparison Test to determine if the given series converges or diverges.According to the Limit Comparison Test,

if [tex]$\lim_{n\to\infty} \frac{a_n}{b_n}[/tex]  =[tex]c$[/tex] where [tex]$c > 0$[/tex],

then both [tex]$\sum_{n=1}^{\infty} a_n$[/tex]

and [tex]$\sum_{n=1}^{\infty} b_n$[/tex] converge or both diverge.

That is  , [tex]$\bullet$[/tex] If  [tex]$\sum_{n=1}^{\infty} b_n$[/tex] converges,

then  [tex]$\sum_{n=1}^{\infty} a_n$[/tex]  converges[tex].$\bullet$[/tex]

If [tex]$\sum_{n=1}^{\infty} b_n$[/tex] diverges,

then [tex]$\sum_{n=1}^{\infty} a_n$[/tex]  diverges.

Let [tex]$a_n = \frac{n^2 + 1}{n^{10}}$[/tex] and

[tex]$b_n = \frac{1}{n}$[/tex]

Then, [tex]$\lim_{n\to\infty} \frac{a_n}{b_n}[/tex] =  [tex]\lim_{n\to\infty} \frac{n^2 + 1}{n^{10}} \cdot \frac{n}{1}[/tex]

= [tex]\lim_{n\to\infty} \frac{n^3 + n}{n^{10}}[/tex]

=[tex]\lim_{n\to\infty} \frac{1}{n^6}+ \lim_{n\to\infty} \frac{1}{n^9}[/tex]

=[tex]0$.[/tex]

Since [tex]\lim_{n\to\infty} \frac{a_n}{b_n} = 0$,[/tex]

which is a finite positive number.

To know more about series convergence visit:

https://brainly.com/question/29258536

#SPJ11

The limit of a(n) / b(n) is infinity, and b(n) is a known convergent series, we can conclude that the original series [tex]\sum (1/n^2 + 1/n)[/tex] also converges. The statement "Converges" is the correct answer.

To test the series [tex]\sum(1/n^2 + 1/n)[/tex] for convergence, we can use the Limit Comparison Test.

We will compare it to the series Σ(1/n),

which is a known series that converges.

Let's denote the original series as [tex]a(n) = 1/n^2 + 1/n[/tex],

and the comparison series as b(n) = 1/n.

We need to calculate the limit of the ratio of the terms of the two series as n approaches infinity:

[tex]\lim_{n \to \infty} a(n)/b(n)\\ \\ \lim_{n \to \infty} [(1/n^2 + 1/n) / (1/n)]\\\\ \lim_{n \to \infty} (n+1)[/tex]

As n approaches infinity, the limit of (n + 1) is infinity.

Since the limit of a(n) / b(n) is infinity, and b(n) is a known convergent series, we can conclude that the original series [tex]\sum(1/n^2 + 1/n)[/tex] also converges.

Therefore, the statement "Converges" is the correct answer.

To know more about convergent series, visit:

https://brainly.com/question/32549533

#SPJ11

If deviations are positive, it means that the observations are above the mean. This is option 1.

Positive deviations indicate that the individual observations are greater than the mean of the dataset. Deviation is a measure of how far each observation deviates from the mean. When the deviations are positive, it implies that the observations are higher than the average or central value represented by the mean.

Linear regression is a statistical technique used to model the relationship between variables. It is not directly related to the sign of deviations. Therefore, option 2 is incorrect.

Option 3, which states that positive deviations indicate that observations are below the mean, is incorrect. Positive deviations indicate observations above the mean, not below.

Option 4, stating that SSE (Sum of Squared Errors) will be negative, is not necessarily true. SSE is a measure of the discrepancy between the observed values and the values predicted by a regression model. It is calculated by summing the squared differences between the observed and predicted values. The SSE can be positive or zero, but it cannot be negative.

In summary, when deviations are positive, it indicates that the observations are above the mean, not below. The statement that SSE will be negative is incorrect.

To learn more about Linear regression : brainly.com/question/13328200

#SPJ11

The value of d is 8 units.

Given is a setup of a circular wheel with radius AC of 5 units and a tangent AB of 12 units, we need to find the value of d,

We know that the tangents are perpendicular to the circle,

So, ΔCAB is a right triangle, using the Pythagoras theorem,

BC² = AB² + AC²

BC² = 5² + 12²

BC² = 169

BC = 13

d = 13-5

d = 8

Hence the value of d is 8 units.

Learn more about tangent click;

https://brainly.com/question/30951227

#SPJ1

Answer: Andiswa is 14 and Jonas is 11

Answer:

Heya Let's Calculate.

Step-by-step explanation:

Let's form equation.

Let the age of Jonas be x.

Then, the age of Andiswa is x+3

Equation=

x+x+3=25

⇒2x+3=25

⇒2x=25-3

⇒x=25/5

x=5

The best description for the solution to the given set of equations is "no solution" or "inconsistent."

The given set of equations consists of two linear equations in the form of y = mx + c, where m represents the slope and c represents the y-intercept.

Equation C: y = 4x + 8

Equation D: y = 4x + 2

Comparing the equations, we can see that both equations have the same slope, which is 4. However, their y-intercepts differ.

For Equation C, the y-intercept is 8, while for Equation D, the y-intercept is 2.

Since the slopes are the same, these equations represent parallel lines. Parallel lines never intersect, which means there is no solution to this set of equations.

Therefore, the best description for the solution to the given set of equations is "no solution" or "inconsistent."

For such more questions on set of equations

https://brainly.com/question/25976025

#SPJ11

The expected number of times one needs to flip a fair coin to get two consecutive heads is 6.

To find the expected number of times one needs to flip a fair coin to get two consecutive heads, we can use the concept of conditional probability.

Let E be the expected number of flips needed to get two consecutive heads.

On the first flip, there is a probability of 1/4 of getting two consecutive heads. If this does not happen, we have to start over and flip the coin again.

On the second flip, there is a probability of 1/4 of getting two consecutive heads, but we have already used one flip, so the expected number of additional flips needed is E.

Therefore, we can write the following equation:

E = (1/4)2 + (1/2)(E+1) + (1/4)(E+2)

E = (1/2)( 1 + E + 1 + E/2 + 1)

E = (1/2)(3 + 3E/2)

E = 3/2 + 3E/4

E/4 = 3/2

E = 6

Therefore, the expected number of times one needs to flip a fair coin to get two consecutive heads is 6.

Learn more about consecutive heads here

https://brainly.com/question/28453685

#SPJ4

The surface S has zero normal vector, and hence, it does not have a well-defined orientation. As a result, the flux of the vector field across the surface cannot be computed using the surface integral ∬S F · dA.

To find the flux of the vector field F across the surface S, we need to evaluate the surface integral ∬S F · dA, where F is the vector field and dA is the vector differential area.

In this case, the vector field F = 2x^2 j - z^4 k and the surface S is the portion of the parabolic cylinder y = 2x^2.

To compute the flux, we first need to parameterize the surface S. Since the surface S is defined by the equation y = 2x^2, we can express it in terms of two parameters u and v as follows:

x = u,

y = 2u^2,

z = v.

The parameter u ranges over the interval [-a, a] and the parameter v ranges over the interval [c, d], where a, c, and d are appropriate values that define the portion of the parabolic cylinder we are interested in.

Next, we compute the cross product of the partial derivatives of the parameterization:

∂r/∂u = i + 4u j,

∂r/∂v = 0 k,

where r = xi + yj + zk is the position vector.

Taking the cross product, we get:

∂r/∂u x ∂r/∂v = (4u) j x 0 k = 0.

Since the cross product is zero, this indicates that the surface S has zero normal vector, and hence, it does not have a well-defined orientation. As a result, the flux of the vector field across the surface cannot be computed using the surface integral ∬S F · dA.

In conclusion, due to the nature of the surface S, which does not have a well-defined normal vector, we cannot compute the flux of the vector field F across the surface S using the given surface integral.

Learn more about normal vector here

https://brainly.com/question/31476693

#SPJ11

The frequency distribution of Charlotte's root causes of tardiness is as follows:20 times for talking to her rival roommates for too long10 times for eating her breakfast or lunch for too long25 times for waking up too late45 times for spending too much time with her crush.

The total number of times Charlotte was late is:

20 + 10 + 25 + 45 = 100.

To estimate the probability of Charlotte arriving late due to talking to her rival roommates for too long, divide the number of times she was late due to this cause by the total number of times she was late.

P(Talking too long) = Number of times talking too long/ Total number of times

she was late P(Talking too long) = 20/100P(Talking too long) = 0.2

Therefore, the main answer is 0.20.

To know more about roommates visit:-

https://brainly.com/question/13522425

#SPJ11

The direction of the rescue boat, obtained by representing the location of the sailboat using vectors is N 8.7° E

A vector is a quantity that posses the properties magnitude and direction.

The vector form of the motion of the sailboat can be presented as follows;

d = 8 × sin(12)·i + 8 × cos(18)·j

The next direction of the sailboat = 3 miles south = -3 j

Therefore, the distance and direction of the sailboat is; 8 × sin(12)·i + 8 × cos(18)·j + -3 j

The direction the rescue boat has to leave from the dock in order to intercept the sailboat is; arctan(3 + 8 × cos(18))/( 8 × sin(12)) ≈ 81.26°

The direction relative to the North = 90° - 81.26° ≈ 8.7°

The direction of the rescue both is N 8.7° E

Learn more on the vectors here: https://brainly.com/question/30216531

#SPJ1

The area of given regular hexagon is  509.22   square units.

For the given polygon,

Number of sides = 6

Since we know that,

A regular hexagon is a polygon with six equal sides and six equal angles. All of the sides and angles of a regular polygon are equal. A regular pentagon, for example, has 5 equal sides, whereas a regular octagon has 8 equal sides. When such prerequisites are not satisfied, polygons can take on the appearance of a variety of irregular forms. When six equilateral triangles are placed side by side, a regular hexagon is formed. The area of the regular hexagon is thus six times the size of the identical triangle.

Therefore,

It is called regular hexagon.

Since we know that,

Area of regular hexagon = (3√3/2)a²

Here we have a = 14

Therefore,

Area of given hexagon = (3√3/2)14²

                                       = 509.22   square units.

To learn more about polygons visit:

https://brainly.com/question/23846997

#SPJ1

The factored form of the quadratic equation 4x²+ 100x + 255 = 0 is (2x + 17)(2x + 15) = 0.

We have the equation:

4x² + 100x + 255 = 0

Now, factorizing

4x² + 34x + 30x + 255 = 0

Now, we group the terms and factor by grouping:

(4x² + 34x) + (30x + 255) = 0

2x(2x + 17) + 15(2x + 17) = 0

(2x + 17)(2x + 15) = 0

Now, we set each factor equal to zero and solve for x:

2x + 17 = 0 --> 2x = -17 --> x = -17/2

2x + 15 = 0 --> 2x = -15 --> x = -15/2

The factored form of the quadratic equation 4x²+ 100x + 255 = 0 is (2x + 17)(2x + 15) = 0 and the solutions for x are x = -17/2 and x = -15/2.

Learn more about Equation here:

https://brainly.com/question/29657983

#SPJ1

Answer:

Slope of WV-

The slope of WV can be found using the two points V(1,-4) and W(6,0):

Slope of WV = (0 - (-4)) / (6 - 1) = 4/5

Slope of WX-

The slope of WX can be found using the two points W(6,0) and X(2,5):

Slope of WX = (5 - 0) / (2 - 6) = -5/4

Slope of XY

The slope of XY can be found using the two points X(2,5) and Y(-3,1):

Slope of XY = (1 - 5) / (-3 - 2) = 4/5

Slope of VY-

The slope of VY can be found using the two points V(1,-4) and Y(-3,1):

Slope of VY = (1 - (-4)) / (-3 - 1) = -5/4

Length of WV-

The length of WV can be found using the distance formula:

Length of WV = sqrt((6-1)^2 + (0-(-4))^2) = sqrt(25 + 16) = sqrt(41)

Length of WX-

The length of WX can be found using the distance formula:

Length of WX = sqrt((2-6)^2 + (5-0)^2) = sqrt(16 + 25) = sqrt(41)

Length of XY-

The length of XY can be found using the distance formula:

Length of XY = sqrt((-3-2)^2 + (1-5)^2) = sqrt(25 + 16) = sqrt(41)

Length of VY-

The length of VY can be found using the distance formula:

Length of VY = sqrt((-3-1)^2 + (1-(-4))^2) = sqrt(16 + 25) = sqrt(41)

Based on the given information, the quadrilateral formed by the points V(1,-4), W(6,0), X(2,5), and Y(-3,1) is a parallelogram. A parallelogram is a quadrilateral with two pairs of parallel sides. The slopes of opposite sides are equal, and the lengths of opposite sides are equal as well. In this case, the opposite sides WV and XY have equal slopes and equal lengths, as do the opposite sides WX and VY. Therefore, the quadrilateral is a parallelogram.

Learn more about Quadrilaterals here:

https://brainly.com/question/12131358

#SPJ12

To find an orthonormal basis of the nullspace of A, we first need to find the nullspace of A. The nullspace of a matrix A consists of all vectors x such that Ax = 0. We can find the nullspace of A by solving the system of linear equations Ax = 0.

Using row operations, we can reduce A to row echelon form:

[ 1 0 1 1 0 -1 6 4 ] -> [ 1 0 1 1 0 -1 0 1 ]

The pivot variables are x1, x3, and x4. We can express the non-pivot variables in terms of the pivot variables:

x2 = -x1

x5 = -x1 + x7

x6 = x1 - 6x7

Thus, the general solution to Ax = 0 is:

[ x1, -x1, x3, x4, -x1 + x7, x1 - 6x7, x7 ]

To find an orthonormal basis, we need to orthogonalize this set of vectors and then normalize them. One way to do this is to use the Gram-Schmidt process.

Using the Gram-Schmidt process, we can orthogonalize the set of vectors by subtracting their projections onto previously orthogonalized vectors. We can start by normalizing the first vector:

v1 = [ 1, 0, 1, 1, 0, -1, 0, 0 ] / sqrt(3)

Next, we can subtract the projection of the second vector onto v1:

v2 = [ 0, -1, 0, 0, 1, -6, 1, 0 ] - proj[0,-1,0,0,1,-6,1,0]v1

v2 = [ 0, -1, 0, 0, 1, -6, 1, 0 ] + [ 0, 1/sqrt(3), 0, 0, -1/sqrt(3), 2/sqrt(3), -1/sqrt(3), 0 ]

v2 = [ 0, -1/sqrt(3), 0, 0, 1/sqrt(3), -4/sqrt(3), 2/sqrt(3), 0 ]

Finally, we can normalize v2:

v2 = [ 0.41, -0.41, 0, 0, 0.41, -0.82, 0.41, 0 ]

Thus, the columns of the matrix [ 0.41, 0, -0.41, 0.82, -1, 0, 0, 0 ] form an orthonormal basis of the nullspace of A.

To learn more about row echelon form : brainly.com/question/30403280

#SPJ11

A model is a representation of reality or a real-life situation. The correct answer is E.

The correct answer is "model."A model is a representation of reality or a real-life situation. It can be used to simulate or describe the behavior of a system, process, or phenomenon.

Models are often used in various fields such as science, engineering, economics, and computer science to understand and analyze complex systems or make predictions about real-world scenarios.

A model is a simplified or abstract representation of a real-life situation or system. It captures the essential features or characteristics of the system while ignoring or simplifying irrelevant details. Models can be physical, conceptual, or mathematical in nature.

Learn more about model at https://brainly.com/question/14638586

#SPJ11

answer is option C

AC =~= BD

Answer: AC = BD this is because these two are of the same and exact equal lengths