The angle turns through 5/6 of the circle The angle measures of 5/6 of the circle the answer is?

Let's denote the width and length of the pool by “w” and “l” respectively. Then, the width of the pool and deck combined would be:So the equation that represents the total area of the pool and deck as binomials is [tex]: A = 2(L + 8)(2L + 8)[/tex]

Let's start by drawing a diagram of the rectangular pool and the surrounding deck:

 ___________  Pool Length (L)

|           |

|           |

|           |

|           |

W|___________|

| Deck Width|

|    = 4ft  |

|___________|

We know that the width of the pool (W) is twice its length (L), so we can write:

[tex]W = 2L[/tex]

We also know that the deck is 4ft wide on each side, so the total width of the pool and deck is:

[tex]W_total = W + 8 = 2L + 8[/tex]

And the total length of the pool and deck is:

[tex]L_total = L + 8[/tex]

The total area of the pool and deck can be found by multiplying the total width by the total length:

[tex]A = W_total \times L_total[/tex]

Substituting our expressions for W_total and L_total, we get:

[tex]A = (2L + 8) * (L + 8)[/tex]

Expanding the brackets, we get:

[tex]A = 2L^2 + 24L + 64[/tex]

So the equation that represents the total area of the pool and deck is:

2L^2 + 24L + 64

To represent the sides of the shape as binomials, we can factor out a common factor of 2 from the quadratic expression:

[tex]A = 2(L^2 + 12L + 32)[/tex]

Then we can write the sides of the shape as:

[tex]L + 8[/tex]   and [tex]2L + 8[/tex]

Therefore, So the equation that represents the total area of the pool and deck as binomials is: [tex]A = 2(L + 8)(2L + 8)[/tex]

Learn more about binomials here:

https://brainly.com/question/13870395

#SPJ1

An [tex]11[/tex]-vertex full graph has around [tex]19,958,931,200[/tex] Hamiltonian circuits in a complete graph.

At one vertex, the Hamiltonian route begins, and at another, it finishes. Yet, when following a Hamiltonian route, every vertex is encountered. At the same vertex, the Hamiltonian circuit begins and terminates. For instance, if a Hamiltonian circuit's path began at vertex 1, the loop will also conclude at that vertex.

Single circuit is the sole trip a Hamiltonian circuit makes to each vertex. It must begin and terminate at same vertex since it is a circuit. A Hamiltonian route does not start and end in a single location, but it does visit each vertex just once with no repetitions.

We have to divide by [tex]2(n-2)[/tex]

[tex]11!/(2(11-2)!) = 11!/2,520[/tex] Hamiltonian circuits we get:

[tex]11!/2,520 = 19,958,931,200[/tex]

Therefore, there are approximately [tex]19,958,931,200[/tex] Hamiltonian circuits in a complete graph with [tex]11[/tex] vertices.

To know more about Hamiltonian circuits visit:

https://brainly.com/question/24103350

#SPJ1

The probability of rolling a number 10 or less is 1, and the probability of rolling a number greater than 10 is 0.

The 10-sided die has 10 faces, each marked with a unique number from 1 to 10. When we talk about the probability of rolling a particular number, we're asking what the chances are of that number coming up when the die is rolled.

In this case, the question asks for the probability of rolling a number 10 or less, which means we're interested in the probability of rolling any number from 1 to 10. Since all the possible outcomes are numbers from 1 to 10, the probability of rolling a number 10 or less is certain, or 1.

This is because the sum of probabilities of all possible outcomes of an experiment is always 1.

Similarly, the probability of rolling a number greater than 10 is impossible, or 0. This is because there are no possible outcomes greater than 10 on the 10-sided die. In general, the probability of an event that cannot occur is always 0.

So, the probability of rolling a number 10 or less is 1, and the probability of rolling a number greater than 10 is 0.

To know more about probability refer here:

https://brainly.com/question/11234923#

#SPJ11

a) r = 30 cm

b) The angle AOC is 0.523598775 radian

c) The area of the shaded region is 541.9 cm²

d) The perimeter of the shaded region is 106.8 cm.

The area of a circle is a measure of the size of the surface of the circle. It is calculated by multiplying the radius of the circle (the length from the center of the circle to its edge) by itself, and then multiplying the result by the constant pi (3.14). The formula for calculating the area of a circle is A = πr2, where “A” represents the area, “π” is pi, and “r” is the radius of the circle.

The radius of the circle, r, can be determined by the Pythagorean theorem. Since AC = 36 cm and AP = 6 cm, the hypotenuse of the right triangle formed by AC and AP is the radius of the circle, r. By applying the Pythagorean theorem, we get:

r² = 362 + 62

r² = 1296

r = √1296

r = 36 cm

b) The angle AOC is 0.523598775 radians

The angle AOC can be determined using the formula for arc length. The arc length of ABC is 36 cm and the radius of the circle is 30 cm. Therefore, the angle AOC is:

AOC = 36/30

AOC = 1.2 radians

c) The area of the shaded region is 541.9 cm²

The area of the shaded region can be determined using the formula for the area of a sector. The angle AOC is 1.2 radians and the radius of the circle is 30 cm. Therefore, the area of the shaded region is:

Area = (1.2)(30)(30)/2

Area = 541.9 cm²

d) The perimeter of the shaded region is 106.8 cm

The perimeter of the shaded region can be determined using the formula for the circumference of a circle. The radius of the circle is 30 cm. Therefore, the perimeter of the shaded region is:

Perimeter = 2π(30)

Perimeter = 106.8 cm

For more questions related to perimeter

https://brainly.com/question/19819849

#SPJ1

The mode of this data set is 3 inches.

In the given data set, the values of rainfall in inches for each week are as follows:

Week 1: 2 inches

Week 2: 3 inches

Week 3: 1 inch

Week 4: 3 inches

Week 5: 5 inches

Week 6: 4 inches

The mode is the value that appears most frequently, which in this case is 3 inches. Therefore, the mode of this data set is 3 inches.

Note that a data set can have more than one mode if there are two or more values that appear with the same frequency and are more frequent than any other value in the data set.

However, in this data set, there is only one mode, which is 3 inches.

To learn more about the mode;

https://brainly.com/question/30891252

#SPJ1

The variance of the set of data is 10. Option A

Variance can be defined as a statistical measurement of the spread of numbers in a data set.

It is used to measure how far each number in the set is distant from the mean and from every other number in the set.

It is sometimes described as the measure of variability.

It is denoted with the mathematical symbol,'σ²'

The formula for calculating the variance of a set of data is;

Variance = ∑(x-x⁻)²/n - 1

Substitute the values, we have;

Variance = 16 + 4 + 4 + 16 + 0/5 - 1

Add the values

Variance = 40/4

Divide the values

Variance = 10

Learn about variance at: https://brainly.com/question/15858152

#SPJ1

In circle S with m∠RST= 56 and RS = 19 units, the length of arc RT ≈ 8.87 units (rounded to two decimal places).

An arc of a circle is a portion of the circumference of the circle. It is defined by two endpoints and the collection of all points on the circle's circumference that lie between these endpoints. The length of an arc is proportional to the measure of its corresponding central angle. The formula to find the length of an arc of a circle is L = (m/360) x 2πr, where L is the length of the arc, m is the measure of the central angle, and r is the radius of the circle. The symbol for an arc is a segment of the circle with a curved line over it.

We know that in a circle with radius r, the measure of the arc of a central angle with measure θ degrees is (θ/360) × 2πr units.

In circle S with center S, we are given that RS = ST = r (say) and m∠RST = 56 degrees. So, the measure of minor arc RT is also 56 degrees.

Therefore, the length of arc RT = (56/360) × 2πr = (7/45) × 2πr.

We are also given that RS = 19 units. Since RS = ST = r, we have r = 19 units.

Substituting this value of r, we get:

Length of arc RT = (7/45) × 2πr = (7/45) × 2π(19) ≈ 8.87 units (rounded to two decimal places).

To know more about radius visit:

https://brainly.com/question/15448382

#SPJ1

Answer:

RT= 18.57

Step-by-step explanation:

TRUST THE PROCESS

Therefore, the correct answer is: The range is the best measure of variability, and it equals 78.

Range is a measure of variability that represents the difference between the maximum and minimum values in a dataset. It gives an indication of how spread out the data is. To find the range of a dataset, you simply subtract the minimum value from the maximum value. Range is often used as a quick and simple measure of variability, but it can be sensitive to outliers and extreme values.

Here,

1. For question 5, the appropriate measure of variability for the given data set is the range, which is the difference between the maximum value and the minimum value in the data set.

To find the maximum and minimum values from the given stem-and-leaf plot, we can look at the highest and lowest digits in each row. The highest value is 83 and the lowest value is 5, so the range is:

Range = 83 - 5 = 78

2. For question 6, the appropriate measure of center to represent the data in the given line plot is the median, because the data is skewed to the right and there are outliers present. The median is less sensitive to outliers than the mean.

Therefore, the correct answer is: The median is the best measure of center because there are outliers present.

To know more about range,

https://brainly.com/question/16664109

#SPJ1

The central limit theorem is a statistical theory that specifies the probability distribution of a sum or average of several random variables whose distribution is not known.

It is an important theorem since it is utilized to help forecast or estimate the behavior of a specific set of data.

This theorem holds that when you take repeated samples of the same size from a population with a finite standard deviation, the means of those samples will be normally distributed, with a mean equal to the population mean and a standard deviation equal to the population standard deviation divided by the square root of the sample size.

Further more, the theorem indicates that the larger the sample size, the more closely the sample mean distribution will approximate a normal distribution.

This is why it is vital in the development and use of statistical quality control techniques, since they rely on correct assumptions about the population’s normality.

For similar question on probability.

https://brainly.com/question/30330068

#SPJ11

The probability that by the time the sum has been even three times, the sum has already been 7 twice is 1/36.

This is because the total number of possible combinations of two dice is 36, and only one combination, (3,4), has the sum of 7 and is also an even number.

Suppose you roll a pair of fair dice repeatedly : https://brainly.com/question/31079082

#SPJ11

The solution to the conversion of units are:

iii) 1 km 200 m - 500 m = 700 m

iv) 876 m + 1 km 500 m = 2km 376 m

v) 2 km 50 m - 950 m = 1 km 100 m

iii) We want to solve:

1 km 200 m - 500 m

From conversion factors, we know that:

1 km = 1000 m

Thus:

1 km 200 m = 1000m + 200 m = 1200 m

Thus:

1 km 200 m - 500 m = 1200 m - 500 m

= 700 m

iv) We want to solve:

876 m + 1 km 500 m

From conversion factors, we know that:

1 km = 1000 m

Thus:

876m = 0.876 km

1 km 500 m = 1.5 km

Thus:

876 m + 1 km 500 m = 0.876 km + 1.5 km

= 2.376 km or 2km 376 m

v) We want to solve:

2 km 50 m - 950 m

From conversion factors, we know that:

1 km = 1000 m

Thus:

2 km 50 m = 2.05 km

950m = 0.95 km

Thus:

2 km 50 m - 950 m = 2.05 km - 0.95 km

= 1.1 km or 1 km 100 m

Read more about Conversion of Units at: https://brainly.com/question/9032119

#SPJ1

p(x)= (x-4)²-(x-6)². ... 4X - 20 = 0 => X = 20/4 => X= 5.

out of the families that have DS, 20 have both, so subtract them from the absolute to get 124 - 20 = 104.

out of the families that have WII, 20 have both, so subtract them from the all-out to get 186 - 20 = 166.

you presently have 3 classifications that are unadulterated.

104 own DS in particular.

266 own WII in particular.

20 own both.

the complete that possesses either a DS or a WII however not both is equivalent to 104 + 266 = 370.

you need to subtract 20 from every classification since it is remembered for both.

it is remembered for DS and it is remembered for WII.

Market surveys are apparatuses to straightforwardly gather criticism from the interest group to grasp their qualities, assumptions, and prerequisites. Marketers foster previously unheard-of techniques for impending items/benefits however there can be no affirmation about the outcome of these methodologies.

to know more about the market survey click here:

https://brainly.com/question/30194160

#SPJ4

the complete question is:

A company conducted a marketing survey for families with young children and found that 124 families own a Nintendo DS and 186 families own a Nintendo Wii. If 20 own a Wii and a DS, how many own either a Wii or DS, but not both?

The option that best describes the reason for the change in Milwaukee's average high temperature in the summer is:

"Milwaukee is beside a lake."

The normalised high or low temperature for at least a 30 year period is the average high or low temperature. As a result, a statistical average is a mean high or low. The statistical significance of an average high or low temperature depends on the length of the records, which must be at least 30 years.

One of the Great Lakes of North America, Lake Michigan, has Milwaukee situated on its western side. The lake's existence influences the climate in a moderating way, especially in the summer when it serves as a "cooling" agent. Milwaukee's July high average is consequently lower than that of comparable cities at the same latitude that are not situated close to significant bodies of water.

The other possibilities don't offer a convincing justification for the observed temperature difference. The temperature of cities at the same latitude would not necessarily change because of Sioux Falls' closeness to mountains or deserts because temperature is impacted by a number of factors, including latitude, elevation, ocean currents, prevailing winds, and more. Milwaukee also doesn't have any notable mountains nearby, and Sioux Falls isn't any closer to a desert than Milwaukee is.

To know more about Average Temperature visit:

https://brainly.com/question/29466218

#SPJ1

Answer:

(a) To find the value of a and d, we use the formula for the sum of first n terms of the arithmetic series A which is given by:Sn = n/2[2a + (n-1)d]We are also given that Sn = 15 + 2n. So we can equate these two expressions to get:15 + 2n = n/2[2a + (n-1)d]Multiplying both sides by 2 and simplifying, we get:30 + 4n = n[2a + (n-1)d]Expanding the brackets and simplifying, we get:2an + nd - d + 30 = 2n^2Rearranging terms, we get:2a = 2n^2 - nd + d - 30Now we also know that the first term of the series A is a. So we can substitute this value of a in the formula above to get:a = (2n^2 - nd + d - 30)/2Simplifying, we get:a = n^2 - (n-1)d - 15Therefore, we have found the values of a and d in terms of n. (b) To find the 20th term of A, we use the formula for the nth term of an arithmetic series which is given by:an = a + (n-1)dSubstituting the value of a and d that we found in part (a) we get:a20 = (20^2 - 19d - 15) + 19dSimplifying, we get:a20 = 391 - dTherefore, the 20th term of A is given by a20 = 391 - d.(c) Given that S2p - 2Sp = 1 + S(p-1), we can use the formula for the sum of first n terms of an arithmetic series which we used in part (a) to get:2p/2[2a + (2p-1)d] - 2p/2[2a + (p-1)d] = 1 + p/2[2a + (p-2)d]Simplifying, we get:2apd = d(p^2 - 3p + 2)Dividing both sides by d and simplifying, we get:2ap = p^2 - 3p + 2Rearranging terms, we get:p^2 - 3p + (2-2ap) = 0This is a quadratic equation with coefficients a=1, b=-3, and c=2-2ap. We can use the quadratic formula to solve for p:p = [3 ± sqrt(9 - 4(1)(2-2ap))]/2Simplifying, we get:p = [3 ± sqrt(4ap + 1)]/2Therefore, we have found the value of p in terms of a.

Answer:

∠D, ∠C, ∠E

Step-by-step explanation:

"The angle opposite to the shortest side is the smallest angle and the side opposite to the longest side is the largest angle."

Therefore , the solution of the given problem of unitary method comes out to be the parking lot has 60 trucks.

It is possible to accomplish the objective by using this widespread convenience, pre-existing variables, or all significant components from the initial Diocesan adaptable survey that adhered to a specific methodology. If it doesn't, both of the essential components of a term confirmation outcome will undoubtedly be lost, but if it is, there is going to be another opportunity to contact the entity.

Here,

Let's begin by giving the unknowns variables:

x = number of vehicles

Van count = 4 times

Since there are 205 cars overall, the number of lorries is equal to (205 - 11x).

The value of x can be determined using the second bit of knowledge:

=> 4x/3 = (205 - 11x)/2

When we simplify this solution, we obtain:

=> 8x = 3(205 - 11x)

=> 8x = 615 - 33x

=> 41x = 615

=> x = 15

We can now determine the quantity of vans:

Van count = 4x = 4(15) = 60

Consequently, the parking lot has 60 trucks.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

the concentrations of nitrogen, phosphate, and potassium in the mixture are 13.33%, 13.67%, and 8%, respectively. To find the concentrations of nitrogen, phosphate, and potassium in the mixture, we need to calculate the total amount of each nutrient in the two bags and then divide by the total weight of the mixture.

First, let's calculate the amount of each nutrient in the 10 pound bag of 12-12-12:

Nitrogen: 12% of 10 pounds = 1.2 pounds

Phosphate: 12% of 10 pounds = 1.2 pounds

Potassium: 12% of 10 pounds = 1.2 pounds

Next, let's calculate the amount of each nutrient in the 5 pound bag of 16-17-0:

Nitrogen: 16% of 5 pounds = 0.8 pounds

Phosphate: 17% of 5 pounds = 0.85 pounds

Potassium: 0% of 5 pounds = 0 pounds

Now, let's add up the total amount of each nutrient in the two bags:

Nitrogen: 1.2 + 0.8 = 2 pounds

Phosphate: 1.2 + 0.85 = 2.05 pounds

Potassium: 1.2 + 0 = 1.2 pounds

Finally, let's divide the total amount of each nutrient by the total weight of the mixture (10 + 5 = 15 pounds) and express the answers as percentages:

Nitrogen: (2 / 15) x 100% = 13.33%

Phosphate: (2.05 / 15) x 100% = 13.67%

Potassium: (1.2 / 15) x 100% = 8%

Therefore, the concentrations of nitrogen, phosphate, and potassium in the mixture are 13.33%, 13.67%, and 8%, respectively.

To know more about percentages: click here:

brainly.com/question/29306119

#SPJ4

Let Y have a distribution function given by 0, Fly) = y <0 y 20.

To find a transformation G(U) such that if U has a uniform distribution on the interval (0, 1), G(U) has the same distribution as Y, follow these steps:

1. Identify the distribution function of Y:

F(y) = 0 for y < 0, and F(y) = 1 - e^(-y) for y ≥ 0.
2. Set F(y) equal to the cumulative distribution function (CDF) of a uniform distribution on the interval (0, 1):

F(y) = U.
3. Solve for y in terms of U to obtain the transformation G(U).

So, for y ≥ 0,
1 - e^(-y) = U

Now, solve for y:
e^(-y) = 1 - U
-y = ln(1 - U)
y = -ln(1 - U)

Therefore, the transformation G(U) is given by G(U) =. ln(1 - U)

To know more about distribution:

https://brainly.com/question/8325317

#SPJ11

To solve triangle ABC, we can use the Law of Cosines, which states that for any triangle with sides a, b, and c and opposite angles A, B, and C, respectively:

c^2 = a^2 + b^2 - 2ab*cos(C)

We are given B, a, and b, so we can solve for c as follows:

c^2 = 25^2 + 41^2 - 2(25)(41)cos(64)

c^2 = 625 + 1681 - 2135cos(64)

c^2 = 1829 - 2135*cos(64)

c^2 = 311.90

Taking the square root of both sides, we get:

c ≈ 17.7

So the length of side c is approximately 17.7 units.

To find the measures of angles A and C, we can use the Law of Sines, which states that for any triangle with sides a, b, and c and opposite angles A, B, and C, respectively:

a/sin(A) = b/sin(B) = c/sin(C)

We know a, b, and c, and we just solved for c, so we can use the Law of Sines to solve for angles A and C:

a/sin(A) = c/sin(C)

sin(A) = asin(C)/c

A = sin^{-1}(asin(C)/c)

A = sin^{-1}(25*sin(C)/17.7)

Similarly,

b/sin(B) = c/sin(C)

sin(B) = bsin(C)/c

B = sin^{-1}(bsin(C)/c)

B = sin^{-1}(41*sin(C)/17.7)

To find angle C, we can use the fact that the sum of the angles in a triangle is 180 degrees:

C = 180 - A - B

Using a calculator, we get:

A ≈ 41.6 degrees

B ≈ 74.1 degrees

C ≈ 64.3 degrees

Therefore, the measures of the angles in triangle ABC are approximately:

A ≈ 41.6 degrees

B = 64 degrees

C ≈ 64.3 degrees

And the lengths of the sides are approximately:

a = 25

b = 41

c ≈ 17.7

To calculate the percent yield of copper (II) oxide, you need to have the actual yield and the theoretical yield. The percent yield can be calculated using the following formula: Percent Yield = (Actual Yield / Theoretical Yield) * 100

1. Obtain the actual yield: This is the amount of copper (II) oxide produced in your experiment or reaction, typically measured in grams.
2. Calculate the theoretical yield: Use the balanced chemical equation and the stoichiometry of the reaction to determine the maximum amount of copper (II) oxide that could be produced from the given reactants.
3. Plug the values into the formula: Divide the actual yield by the theoretical yield and multiply the result by 100 to get the percent yield.
If you obtained a yield different than the expected or theoretical yield, there could be several reasons, including experimental errors, impure reactants, or side reactions occurring during the process. These factors can cause the actual yield to be higher or lower than the theoretical yield.

Learn more about percent yield here, https://brainly.com/question/11963853

#SPJ11

The total number of biscuits the baker should place into each, according to the declaration, is 12.

The mathematical expressions consist of at least a couple of integers or issues, no fewer than one math procedure, and a sentence. It's achievable to multiply, divide, add, or remove with this algebraic method. An expression's form is as follows: Expression: (Math Operator, Number/Variable, Arithmetic Operator)

The total number of cookies in both batches is:

36 + 48 = 84

To divide the cookies into seven equal groups, we need to divide the total number of cookies by 7:

84 / 7 = (12 x 7) / 7 = 12

So the baker should put 12 cookies into each of the seven groups.

A numerical expression that shows how to determine the total number of cookies the baker should put into each group with parentheses is:

(36 + 48) / 7 = (84) / 7 = 12

To know more about Expression visit:

https://brainly.com/question/1859113

#SPJ1

Answer: 21

Step-by-step explanation:because 21 savage is #1

Answer:

Step-by-step explanation:

Answer: 0.0625 g/cm^3

Formula for density: d= mass/volume

we have mass m=50g

volume of rectangular prism = length x height x width

volume of book = 5cm x 16cm x 10cm = 800cm^3

density = mass / volume

density = 50g/800cm^3

density = 0.0625 g/cm^3

The required number of multiplications using a single composite transformation matrix for k transformations of n points is n × k.

In computer graphics, composite transformation matrices are used to transform points and shapes. These matrices are created by combining multiple transformations into a single matrix, allowing for efficient processing of large amounts of data. The number of multiplications required to perform a composite transformation depends on the number of points being transformed and the number of transformations being applied.

If there are n points and k transformations, then the required number of multiplications is n × k.

This is because each point needs to be multiplied by the composite transformation matrix k times.

Therefore, the total number of multiplications is n × k.

To learn more about “transformation matrices” refer to the https://brainly.com/question/20366660

#SPJ11

The speed of the boat in still water is 5 km/h.

Let's denote the speed of the boat in still water as "v" (in km/h). Since the boat travels 2 km upstream and 2 km downstream, we know that the total distance traveled is 4 km.

Let's first calculate the time taken to travel 2 km upstream. We know that the current is flowing at 2 km/h, so the effective speed of the boat relative to the river is (v - 2) km/h (since it is going against the current). Therefore, the time taken to travel 2 km upstream is

time taken = distance / speed = 2 / (v - 2) hours

Similarly, the time taken to travel 2 km downstream is

time taken = distance / speed = 2 / (v + 2) hours

The total time taken for the round trip (2 km upstream and 2 km downstream) is given as 11 minutes, which is equivalent to (11/60) hours. Therefore, we can write

2 / (v - 2) + 2 / (v + 2) = 11/60

Multiplying both sides by (v - 2)(v + 2) gives

2(v + 2) + 2(v - 2) = (v - 2)(v + 2)(11/60)

Simplifying the right-hand side gives

(v - 2)(v + 2)(11/60) = (11/3)v^2 - 44/3

Substituting this expression into the previous equation and simplifying gives

22v = (11/3)v^2 - 44/3

Multiplying both sides by 3 gives

66v = 11v^2 - 44

Rearranging and solving for v using the quadratic formula gives

v = (11 ± √(11^2 + 4×44))/22

Taking the positive solution (since v must be positive) gives

v = 5 km/h

Learn more about speed here

brainly.com/question/15147118

#SPJ4

The length of Tanya's mural is 28 feet.

A rectangle is a 2-dimensional shape with parallel opposite sides equal to each other and four angles are right angles.

Area of a rectangle is expressed as;

Area = length × width

We know that the area of Tanya's mural is 224 square feet, and the height of the mural is 8 feet.

So we can use these values to find the length of the mural:

Area = length × width

224 = length × 8

To solve for the length, we can divide both sides of the equation by 8:

length = 224 ÷ 8

length = 28 feet

Therefore, the dimension of the length is 28 feet.

Learn more about area of rectangle here: https://brainly.com/question/27612962

#SPJ1

The equation of the line is y = 3x/2 - 8 and can be rewritten using function notation as f(x) = 3x/2 - 8

The slope-intercept form of a line is given by

                   y = mx + c

Where 'm' is slope and c in y-intercept

Here we have

The coordinate of points (0, -8) and slope (m) = 3/2

As we know the formula for slope intercept form is  y = mx + c

Where 'm' is the slope

=> y = (3/2)x + c

=> -8 = 3/2(0) + c

=> c = - 8

Hence, Equation of the line is y = 3/2(x) + (-8)

=> y = 3x/2 - 8

The equation can be rewritten using function notation as follows

=> f(x) = 3x/2 - 8

Therefore,

The equation of the line is y = 3x/2 - 8 and can be rewritten using function notation as f(x) = 3x/2 - 8

Learn more about Slope at

https://brainly.com/question/17573802

#SPJ1

Answer:

500 vehicles

Step-by-step explanation:

let t represent number of tolls and v represent number of vehicles.

given that t varies directly with v then the equation relating them is

t = kv ← k is the constant of variation

to find k use the condition t = 129 from v = 20 , then

129 = 20k ( divide both sides by 20 )

6.45 = k

t = 6.45v ← equation of variation

when t = 3225 , then

3225 = 6.45v ( divide both sides by 6.45 )

500 = v

the number of vehicles is 500

Answer:

measure of angle MPQ is 125

Step-by-step explanation:

1) Corresponding angles are congruent

5x=3x+50

2x=50

x=25

2) Substitute back into the equation

3(25)+50 = 125