The blending of one s atomic orbital and three p atomic orbitals produces ________.

A three sp3
B four sp3
C three sp
D four sp2
E four sp

Answer:

The balanced equation is: Zn(s) + 2H⁺(aq) → Zn²⁺(aq) + H₂(g)

Explanation:

Zn(s) is a simple substance (its oxidation number is zero) and it is oxidized to Zn²⁺. It loses two electrons, so the half reaction is the following:

Zn(s) → Zn²⁺(aq) + 2 e-   (oxidation reaction)

Hydrogen ion (H⁺) is reduced to hydrogen gas (H₂). The oxidation number is decreased from +1 to 0 (because H₂ is a simple substance). H⁺ gains 1 electron per H atom, so the half reaction is the following:

2H⁺(aq) + 2 e- → H₂(g) (reduction reaction)

We obtain the overall reaction from the addition of the two half reactions. We write the reduction reaction first and then the oxidation reaction, as follows:

2H⁺(aq) + 2 e- → H₂(g)

+

Zn(s) → Zn²⁺(aq) + 2 e-

---------------------------------

Zn(s) + 2H⁺(aq) → Zn²⁺(aq) + H₂(g)

The two electrons at both sides of the equation (2 e-) are canceled. The overall reaction is in acidic solution due to the presence of H⁺ ions. The net charge at both sides is the same : +2, so the mass and the charge are balanced.

Answer:

20.0

Explanation:

NaOH = (25.0) (0.100m) \ 0.125M = 20.0mL

Answer:

How the chemical reacts

Explanation:

Answer:

Explanation:

A nonpolar molecule has no separation of charge, so no positive or negative poles are formed. In other words, the electrical charges of nonpolar molecules are evenly distributed across the molecule. Nonpolar molecules tend to dissolve well in nonpolar solvents, which are frequently organic solvents. The answer is hydrogen cyanide.

Answer

Hello

I think the reaction is like this FeO+OFe²O³

And the balance reaction is 2Fe+OFe²O³

Explanation:

At first we should find sth that has more atoms than the other then for example we realized that we have two atoms of Fe in Fe²O³ then put 2 before FeO and now we have 2 atoms of Fe in right side and 2 atoms of Fe in left then Oxygen in FeO change to 2 atoms of Oxygen and we have an other one in right side that they become 3 atoms of Oxygen and now we have 3 atoms of Oxygen in both right and left side.

Finally our reaction balanced.

Good luck

Answer:

The mass of the element is 141.03701 amu

Explanation:

The catch here is that it notes a " newly found element. " Otherwise you could just refer to the average atomic mass of the element in the periodic table, and receive your solution in a much faster way.

The first isotope has an atomic mass of 139.905 amu, and a respective percent abundance of 37.25%. The second isotope has an atomic mass of 141.709 amu, and the remaining percent abundance, 100% - 37.25% = 62.75% ( given ). We can calculate the mass of the unknown element by associating each percentage with the mass of their respective isotope, over 100%.

Mass = ( ( 139.905 amu )( 37.25% ) + ( 141.709 amu )( 62.75% ) )/ 100,

Mass = ( ( 5211.46125 ) + ( 8892.23975 ) ) / 100,

Mass = ( 14103.701 ) / 100 = 141.03701 amu

Answer:

0.89kg

Explanation:

Q=mL L=specific latent heat

Q=energy required in J

m=mass in Kg

Q=mL

m=Q/L

m=2000000J/2.25 x 10^6 J kg-1

m=0.89kg

Answer:

The answers to your questions are given below

Explanation:

The following data were obtained from the question:

CH3COOH → CH3C00^- + H^+

Equilibrium constant, Ka = 1.8 x 10^-5

AgCl → Ag^+ + Cl^-

Equilibrium constant, Ksp = 1.6 x 10^-10

Al(OH)3 → Al^3+ + 3OH^-

Equilibrium constant, Ksp = 3.7 x 10^-15

A+B → C

Equilibrium constant, K = 4.9 x 10^3

When the value of the equilibrium constant is grater than 1, it shows that the concentration of product is higher than that of the reactant and it implies that the forward reaction is favored.

When the value of the equilibrium constant is 1, it shows that the the concentration of the product and reactant are the same. Therefore neither the forward nor the reverse reaction is favored.

When the value of the equilibrium constant is lesser than 1, it shows that the concentration of the reactant is higher than the concentration of the product. Therefore, the reversed reaction is favored.

Now, we shall the question given above as follow:

A. CH3COOH → CH3C00^- + H^+

Equilibrium constant, Ka = 1.8 x 10^-5

Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.

B. AgCl → Ag^+ + Cl^-

Equilibrium constant, Ksp = 1.6 x 10^-10

Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.

C. Al(OH)3 → Al^3+ + 3OH^-

Equilibrium constant, Ksp = 3.7 x 10^-15

Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.

D. A+B → C

Equilibrium constant, K = 4.9 x 10^3

Since the value of the equilibrium constant is greater than 1, it means that the forward reaction is favored.

The reaction conditions are:

A. The reverse reaction is favored.

B. The reverse reaction is favored.

C. The reverse reaction is favored.

D. The forward reaction is favored.

Chemical reaction:

A. [tex]CH_3COOH[/tex] → [tex]CH_3COO^- + H^+[/tex]

Equilibrium constant, Ka = [tex]1.8 * 10^{-5}[/tex]

B. [tex]AgCl[/tex] → [tex]Ag^+ + Cl^-[/tex]

Equilibrium constant, Ksp = [tex]1.6 * 10^{-10}[/tex]

C. [tex]Al(OH)_3[/tex] → [tex]Al^{3+} + 3OH^-[/tex]

Equilibrium constant, Ksp = [tex]3.7 * 10^{-15}[/tex]

D. A+B → C

Equilibrium constant, K = [tex]4.9 * 10^3[/tex]

When the value of the equilibrium constant is greater than 1, it shows that the concentration of product is higher than that of the reactant and it implies that the forward reaction is favored.

When the value of the equilibrium constant is 1, it shows that the the concentration of the product and reactant are the same. Therefore neither the forward nor the reverse reaction is favored.

When the value of the equilibrium constant is lesser than 1, it shows that the concentration of the reactant is higher than the concentration of the product. Therefore, the reversed reaction is favored.

Thus, the reactions will be:

A. The reverse reaction is favored.

B. The reverse reaction is favored.

C. The reverse reaction is favored.

D. The forward reaction is favored.

Find  more information about Equilibrium constant here:

brainly.com/question/12858312

Answer:

1.55 × 10²⁵ atoms of H  

Explanation:

3.21mol C₃H₈ × 8mol H × (6.022×10²³)

Answer:

The Lewis structure is attached with the answer -

Explanation:

Lewis structure or Lewis dot diagram are diagrams or representation of showing the bonding between different or same atoms of a molecule in any and also shows lone pairs of electrons that may exist in the molecule as dots.

HBrO₄ is bromine oxoacid which is also known as perbromic acid. It is a unstable inorganic compound.

The Lewis structure is attached in form of image with representation of lone pairs of electrons.

Answer:

The side chains of the amino acids alternate above and below the sheet

Explanation:

Hydrogen bonds are formed between the amine and carbonyl groups across strands. ... Antiparallel ß sheets are slightly more stable than parallel ß sheets because the hydrogen bonding pattern is more optimal.

Answer:

Ksp = 2.06x10⁻¹⁰

Explanation:

For AB₂. solubility product constant, Ksp, is written as follows:

AB₂(s) ⇄ A²⁺ + 2Br⁻

Ksp = [A²⁺] [Br⁻]²

Molar solubility represents how many moles of AB₂ are soluble per liter of solution. and is obtained from Ksp:

AB₂(s) ⇄ A²⁺ + 2Br⁻

AB₂(s) ⇄ X + 2X

where X are moles that are soluble (Molar solubility)

Ksp = [X] [2X]²

As molar solubility of the salt is 3.72x10⁻⁴M:

Ksp = 4X³

Ksp = 4(3.72x10⁻⁴)³

Answer:

35%

Explanation:

Percentage yield = actual yield / theoretical yield × 100.

Given:

Actual yield = 63.07g

Theoretical yield = ?

Mole ratio of C7H6O3 to C4H6O3 = 1 : 1

1 mole of C7H6O3 - 138.1g

Which implies that only 1 mole s[tex]\frac{63.07}{180.2} * 100[/tex]hould be used up in the reaction, yielding 180.2 g of C9H8O4. ⇒ Theoretical yield = 180.2g

∴ % Yield = [tex]\frac{63.07}{180.2} * 100[/tex]

= 35% yield.

Let me know if you found this easy to understand.

Answer:   3.87M  of HI remains after 27.3 s

Explanation:

Using the Second order decomposition equation of

1/[H]t =K x t +1/[A]o

Given initial concentration ,[A]o = 4.78M

time, t = 27.3 s

rate of constant , k= 1.80 x 10^-3 M-1s-1

1/[H] t= 1/[A] t= concentration after time, t=?

SOLUTION

1/[A] t =kt +1/[A]o

1/[A] t =(1.80 x 10^-3 (27.3)+1/4.78

0.04914+0.2092=0.2583

1/[A] t =0.2583

[A] t =1/0.2583= 3.87M

Answer:

See explanation

Explanation:

In this case, we have to keep in mind the valence electrons for each atom:

N => 5 electrons

O => 6 electrons

If the formula is [tex]N_2O_4[/tex], we will have in total:

[tex](5*2)+(6*4)=34~electrons[/tex]

Additionally, we have to remember that each atom must have 8 electrons. So, for oxygens 5 and 3 we will have 3 lone pairs and 1 bond (in total 8 electrons. For oxygens, 6 and 4 we will have 2 lone pairs and 2 bonds (in total 8 electrons) and for nitrogens 1 and 2 we will have 4 bonds (in total 8 electrons).

To find the hybridization, we have to count the atoms and the lone pairs around the nitrogen. We have 3 atoms and zero lone pairs. If we take into account the following rules:

[tex]Sp^3~=~4[/tex]

[tex]Sp^2~=~3[/tex]

[tex]Sp~=~2[/tex]

With this in mind, the hybridization of nitrogen is [tex]Sp^2[/tex].

See figure 1

I hope it helps!

The central nitrogen atoms in N2O4 are both sp2 hybridized.

The Lewis structure shows the number of electron pairs that surround the atoms in a molecule as dots. It is quite easy to determine the number of valence electrons in a molecule simply by observing its Lewis dot structure.

The molecule N2O4 has 34 valence electrons as shown in its dot electron structure. The central nitrogen atoms in N2O4 are both sp2 hybridized as shown. The formal charges on each atom in N2O4 are also shown.

Learn more:

Answer:

Combination of H2N(CH2)8NH2 and HOOC(CH2)6COOH leads to the loss of water molecules at each linkage position.

Explanation:

A condensation polymer is a polymer formed when two monomers combine with the elimination of a small molecule such as water. The removal of the small molecule occurs at the point where the two monomers are joined to each other.

Nylon is known to form condensation polymers. This is because it involves the linkage of an -OH group to an -NH2 group. Water is eliminated in the process.

In the case of H2N(CH2)8NH2 and HOOC(CH2)6COOH, linkage of the both monomers at the 8 position of each chain leads to the formation of nylon- 8,8 with loss of water molecules at each linkage position. This stepwise loss of water molecules at each linkage makes it a condensation polymer.

Answer:

Ethane would have a higher boiling point.

Explanation:

In this case, for the lewis structures, we have to keep in mind that all atoms must have 8 electrons (except hydrogen). Additionally, each carbon would have 4 valence electrons, with this in mind, for methane we have to put the hydrogens around the carbon, and with this structure, we will have 8 electrons for the carbon. In ethane, we will have a bond between the carbons, therefore we have to put three hydrogens around each carbon to obtain 8 electrons for each carbon.

Now, the main difference between methane and ethane is an additional carbon. In ethane, we have an additional carbon, therefore due to this additional carbon, we will have more area of interaction for ethane. If we have more area of interaction we have to give more energy to the molecule to convert from liquid to gas, so, the ethane will have a higher boiling point.

I hope it helps!

The Lewis structure shows the valence electrons in a molecule. Ethane will have a higher boiling point than methane.

We can deduce the number of valence electrons in a molecule by drawing the Lewis structure of the molecule. The Lewis structure consists of the symbols of elements in the compound and the valence electrons in the compound.

We know that the higher the molar mass of a compound the greater its boiling point. Looking at the Lewis structures of methane and ethane, we cam see that ethane has a higher molecular mass (more atoms) and consequently a higher boiling point than methane.

Learn more: https://brainly.com/question/2510654

Answer:

- Pressure in St. Paul, Minnesota

- Temperature in St. Paul, Minnesota

Explanation:

22.4 L or dm³ is the volume for a gas under Standard pressure and temperature conditions.

It is logically to say, that tempereature value at the day of the experiment was not 273.15 K, which is 32°F

We can say, that the pressure was not 1 atm. St Paul Minnesota has  a minimum, but a little height, so the pressure differs by few figures from the standard pressure values.

We also have to mention, that 22.4 L is the value for the Ideal gases at standards conditions. Ideal gases does not exisist on practice, we always talk about real gases. Don't forget the Ideal Gases Law equation:

P . V = n . R . T

Pressure . Volume = number of moles . 0.082 L.atm /mol. K  . 273.15K

Number of moles must be 1 at STP, to determine a volume of 22.4L

Answer:

The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]

Explanation:

Henry's Law indicates that the solubility of a gas in a liquid at a certain temperature is proportional to the partial pressure of the gas on the liquid.

C = k*P

where C is the solubility, P the partial pressure and k is the Henry constant.

So, being the concentration [tex]C=\frac{ngas}{V}[/tex]  

where ngas is the number of moles of gas and V is the volume of the solution, you must calculate the number of moles ngas. This is determined by the Ideal Gas Law: P*V=n*R*T where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. So [tex]n=\frac{P*V}{R*T}[/tex]

In this case:

Then:

[tex]n=\frac{1 atm*5.16*10^{-2} L}{0.082 \frac{atm*L}{mol*K} *298K}[/tex]

Solving:

n= 2.11 *10⁻³ moles

So: [tex]C=\frac{ngas}{V}=\frac{2.11*10^{-3} moles}{1 L} =2.11*10^{-3} \frac{moles}{L}= 2.11*10^{-3} M[/tex]

Using Henry's Law and being C=CAr and P =PAr:

2.11*10⁻³ M= k* 1 atm

Solving:

[tex]k=\frac{2.11*10^{-3} M}{1 atm}[/tex]

You get:

[tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]

The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]

The Henry's law constant for argon gas in 1 litre of water is 2.1 × 10⁻³M/atm.

Henry's law of gas states that solubility of a gas in any liquid at particular temperature is directly proportional to the partial pressure of the gas.

C∝P

C = kP, where

k = Henry's constant

P = partial pressure of gas

C is the solubility and it is present in the form of concentration and will be calculated as:
C = n/V

n = no. of moles

V = volume

And moles of the gas will be calculated by using the ideal gas equation as:

PV = nRT

n = (1)(5.16×10⁻²) / (0.082)(298) = 2.1 × 10⁻³ moles

And Concentration in liquid will be:

C = 2.1 × 10⁻³mol / 1L = 2.1 × 10⁻³ M

Now we put all these values in the first equation to calculate the value of k as:

k = (2.1 × 10⁻³M) / (1atm) = 2.1 × 10⁻³M/atm

Hence required value of k is 2.1 × 10⁻³M/atm.

To know more about Henry's law, viist the below link:

https://brainly.com/question/12823901

Answer:

Molecule C

Explanation:

In this case, on the first reaction, we will have the production of a Grignard reagent. This molecule will react with [tex]D_2O[/tex] and a deuterium atom will be transferrred to the benzene ring. Then at the top of the molecule, we will have an acetal structure. This acetal can be broken by the action of the acid [tex]DCl[/tex], In the mechanism at the end, we will obtain a carbonyl group bonded to a hydrogen atom. Therefore we will have in the final product the aldehyde group. See figure 1 to further explanations.

I hope it helps!

Answer:

[tex]7.48X10^3~mL[/tex]

Explanation:

For this question we have:

-) A solution NaOH 0.25 M

-) 500 g of glyceryl tripalmitoleate (tripalmitolein)

We can start with the reaction between NaOH and tripalmitolein. NaOH is a base and tripalmitolein is a triglyceride, therefore we will have a saponification reaction. The products of this reaction are glycerol and (E)-hexadec-9-enoate.

Now, with the reaction in mind, we can calculate the moles of NaOH that we need if we use the molar ratio between NaOH and tripalmitolein (3:1) and the molar mass of tripalmitolein (801.3 g/mol). So:

[tex]500~g~tripalmitolein\frac{1~mol~tripalmitolein}{801.3~g~tripalmitolein}\frac{3~mol~NaOH}{1~mol~tripalmitolein}=1.87~mol~NaOH[/tex]

With the moles of NaOH we can calculate the volume (in litters) if we use the molarity equation and the Molarity value:

[tex]M=\frac{mol}{L}[/tex]

[tex]0.25~M=\frac{1.87~mol~NaOH}{L}[/tex]

[tex]L=\frac{1.87~mol~NaOH}{0.25~M}[/tex]

[tex]L=7.48[/tex]

Now we can do the conversion to mL:

[tex]7.48~L~\frac{1000~mL}{1~L}=~7.48X10^3~mL[/tex]

I hope it helps!

Answer:

2-ethoxy-2-methylpropan-1-ol

Explanation:

On this reaction, we have an "epoxide" (2-methyl-1,2-epoxypropane). Additionally, we have acid medium (due to the sulfuric acid [tex]H_2SO_4[/tex]). The acid medium will produce the hydronium ion ([tex]H^+[/tex]). This ion would be attacked by the oxygen of the epoxide. Then a carbocation would be produced, in this case, the most stable carbocation is the tertiary one. Then an ethanol molecule acts as a nucleophile and will attack the carbocation. Finally, a deprotonation step takes place to produce 2-ethoxy-2-methylpropan-1-ol.

See figure 1

I hope it helps!

Answer:

ΔH = [tex]q_{p}[/tex]

Explanation:

In a calorimeter, when there is a complete combustion within the calorimeter, the heat given off in the combustion is used to raise the thermal energy of the water and the calorimeter.

The heat transfer is represented by

[tex]q_{com}[/tex] = [tex]q_{p}[/tex]

where

[tex]q_{p}[/tex] = the internal heat gained by the whole calorimeter mass system, which is the water, as well as the calorimeter itself.

[tex]q_{com}[/tex]  = the heat of combustion

Also, we know that the total heat change of the any system is

ΔH = ΔQ + ΔW

where

ΔH = the total heat absorbed by the system

ΔQ = the internal heat absorbed by the system which in this case is [tex]q_{p}[/tex]

ΔW = work done on the system due to a change in volume. Since the volume of the calorimeter system does not change, then ΔW = 0

substituting into the heat change equation

ΔH = [tex]q_{p}[/tex] + 0

==> ΔH = [tex]q_{p}[/tex]

Answer:

1. Na + O2 → Na2O (Balanced)

2. 4Al + 3O2 → 2(Al2O3) (Balanced)

3. H2 + i2 → 2HI (Balanced)

4. Mg + 2H2O → Mg(OH)2+ H2 (Balanced)

5. 2Ca +O2 → 2CaO (Balanced)

Answer:

D) 1 iron(II), 2 chloride

Explanation:

Iron II chloride is the compound; FeCl2. It is formed as follows, ionically;

Fe^2+(aq) + 2Cl^-(aq) -----> FeCl2

The formation of one mole of FeCl2 involves the reaction one mole of iron and two moles of chloride ions. This means that in FeCl2, the ratio of iron to chlorine is 1:2 as seen above.

Therefore there is one iron II ion and two chloride ions in each mole of iron II chloride, hence the answer.

Answer: b. HSO4-

Explanation:

H2SO4 (sulfuric acid) will donate a hydrogen ion in solution to form H3O+(hydronium). The remaining HSO4- would be the conjugate base of this dissociation.

A conjugate base contains one less H atom and one more - charge than the acid that formed it.

A conjugate acid contains one more H atom and one more + charge than the base that formed it.

Answer:

I think its B

Explanation:

Precipitation reactions leave a solid behind. The solid is called a precipitate.

Answer:

B

Explanation:

An insoluble solid will form when ions in dissolved compounds switch places.

Answer:

A) Chlorine (Cl)

B) Cobalt (Co)

C) Caesium (Cs)

Hope this helps.

The abbreviated electron configurations that was given in the question belongs to

Chlorine (Cl)

Cobalt (Co)

Caesium (Cs) respectively.

Therefore, electron configurations  explain orbitals of an atom when it is in it's ground state.

Learn more at:https://brainly.com/question/21940070?referrer=searchResults

Answer:

E. Q < K and reaction shifts right

Explanation:

Step 1: Write the balanced equation

A(s) + 3 B(l) ⇄ 2(aq) + D(aq)

Step 2: Calculate the reaction quotient (Q)

The reaction quotient, as the equilibrium constant (K), only includes aqueous and gaseous species.

Q = [C]² × [D]

Q = 0.64² × 0.38

Q = 0.15

Step 3: Compare Q with K and determine in which direction will shift the reaction

Since Q < K, the reaction will shift to the right to attain the equilibrium.

Answer:

0.36 g of N2.

Explanation:

The following data were obtained from the question:

Temperature (T) = 25 °C

Volume (V) = 340 mL

Measured pressure = 730 torr

Vapour pressure = 23.76 torr

Mass of N2 =..?

First, we shall determine the true pressure of N2. This can be obtained as follow:

Measured pressure = 730 torr

Vapor pressure = 23.76 torr

True pressure =..?

True pressure = measured pressure – vapor pressure

True pressure = 730 – 23.76

True pressure = 706.24 torr.

Converting 706.24 torr to atm, we have:

760 torr = 1 atm

Therefore,

706.24 torr = 706.24 / 760 = 0.929 atm

Next, we shall convert 340 mL to L. This is illustrated below:

1000 mL = 1 L

Therefore,

340 mL = 340/1000 = 0.34 L

Next, we shall convert 25 °C to Kelvin temperature. This is illustrated below:

Temperature (K) = Temperature (°C) + 273

T(K) = T (°C) + 273

T (°C) = 25 °C

T(K) = 25 °C + 273

T (K) = 298 K

Next, we shall determine the number of mole of N2. This can be obtained as follow:

Pressure (P) = 0.929 atm

Volume (V) = 0.34 L

Temperature (T) = 298 K

Gas constant (R) = 0.0821 atm.L/Kmol

Number of mole (n) =...?

PV = nRT

0.929 x 0.34 = n x 0.0821 x 298

Divide both side by 0.0821 x 298

n = (0.929 x 0.34 ) /(0.0821 x 298)

n = 0.0129 mole

Finally, we shall determine the mass of N2 as shown below:

Mole of N2 = 0.0129 mole

Molar mass of N2 = 2x14 = 28 g/mol

Mass of N2 =.?

Mole = mass /Molar mass

0.0129 = mass of N2/ 28

Cross multiply

Mass of N2 = 0.0129 x 28

Mass of N2 = 0.36 g

Therefore, 0.36 g of N2 was collected.