Answer:
D. Refrigerants
Explanation:
In the United States of America, the agency which was established by US Congress and saddled with the responsibility of overseeing all aspects of pollution, environmental clean up, pesticide use, contamination, and hazardous waste spills is the Environmental Protection Agency (EPA). Also, EPA research solutions, policy development, and enforcement of regulations through the resource Conservation and Recovery Act .
The Clean Air Act Amendments of 1990 prohibit service-related releases of all refrigerants such as R-12 and R-134a. This ban became effective on the 1st of January, 1993.
Refrigerants refers to any chemical substance that undergoes a phase change (liquid and gas) so as to enable the cooling and freezing of materials. They are typically used in air conditioners, refrigerators, water dispensers, etc.
Answer:
D
Explanation:
when you look directly at a camera lens, it may seen like there is only one lens, but entering light actually passes through a series of lenses, or_____, that bend the light and send it on its way to be focused on the film or digital. chip
Frame
Optics
Flash
SD cARD
Answer:
The answer should be optics...
Explanation:
If aa person is known to have look at a camera lens straight and light passes via a number of lenses, or Optics.
What is Optics?This is known to be an aspect of physics that looks at the attributes and properties of light, such as its relationship with matter, etc.
Therefore, If a person is known to have look at a camera lens straight and light passes via a number of lenses, or Optics.
Learn more about Optics from
https://brainly.com/question/18300677
#SPJ9
What is the relationship between an object and class in an OOP program?
The object contains classes.
The object and class are the same thing.
The object is used to create a class.
The object in a program is called a class.
Answer:
D. The object in a program is called a class.
Explanation:
Java is a object oriented and class-based programming language. It was developed by Sun Microsystems on the 23rd of May, 1995. Java was designed by a software engineer called James Gosling and it is originally owned by Oracle.
In object-oriented programming (OOP) language, an object class represents the superclass of every other classes when using a programming language such as Java. The superclass is more or less like a general class in an inheritance hierarchy. Thus, a subclass can inherit the variables or methods of the superclass.
Basically, all instance variables that have been used or declared in any superclass would be present in its subclass object.
Hence, the relationship between an object and class in an OOP program is that the object in a program is called a class.
For example, if you declare a class named dog, the objects would include barking, color, size, breed, age, etc. because they are an instance of a class and as such would execute a method defined in the class.
Draw TOUT Uw Use the space below to draw your own image with the shapes. Then see if you can communicate it to your partner to draw using the shape drawing tool in Game Lab. You can also give your drawing to another group to use as a challenge 0 50 100 150 200 250 300 350 400 Shape Size These shapes are the correct size 50 100 Pattern Reference If you don't have red, green, or blue to draw with fill in the patterns or colors you'll use instead 150 200 Red 250 Green 300
Answer:
um
Explanation:
Consider the following method.
public int locate(String str, String oneLetter)
{
int j = 0;
while(j < str.length() && str.substring(j, j+1).compareTo*oneLetter < 0)
{
j++;
}
return j;
}
Which of the following must be true when the while loop terminates?
a. j == str.length()
b. str.substring(j, j+1) >= 0
c. j <= str.length() || str.substring(j, j+1).compareTo(oneLetter) > 0
d. j == str.length() || str.substring(j, j+1).compareTo(oneLetter) >= 0
e. j == str.length() && str.substring(j, j+1).compareTo(oneLetter) >= 0
Answer:
All
Explanation:
From the available options given in the question, once the while loop terminates any of the provided answers could be correct. This is because the arguments passed to the while loop indicate two different argument which both have to be true in order for the loop to continue. All of the provided options have either one or both of the arguments as false which would break the while loop. Even options a. and b. are included because both would indicate a false statement.
Write a function called is_present that takes in two parameters: an integer and a list of integers (NOTE that the first parameter should be the integer and the second parameter should be the list) and returns True if the integer is present in the list and returns False if the integer is not present in the list. You can pick everything about the parameter name and how you write the body of the function, but it must be called is_present. The code challenge will call your is_present function with many inputs and check that it behaves correctly on all of them. The code to read in the inputs from the user and to print the output is already written in the backend. Your task is to only write the is_present function.
Answer:
The function in python is as follows
def is_present(num,list):
stat = False
if num in list:
stat = True
return bool(stat)
Explanation:
This defines the function
def is_present(num,list):
This initializes a boolean variable to false
stat = False
If the integer number is present in the list
if num in list:
This boolean variable is updated to true
stat = True
This returns true or false
return bool(stat)
What is media framing?
Answer:
media frame all news items by specific values, facts, and other considerations, and endowing them with greater apparent for making related judgments
Explanation:
Computing devices translate digital to analog information in order to process the information
Computing devices are electronic.
The CPU processes commands.
The memory uses binary numbers
Complete Question:
Which of the following about computers is NOT true?
Group of answer choices.
A. Computing devices translate digital to analog information in order to process the information.
B. Computing devices are electronic.
C. The CPU processes commands.
D. The memory uses binary numbers
Answer:
A. Computing devices translate digital to analog information in order to process the information.
Explanation:
Computing is the process of using computer hardware and software to manage, process and transmit data in order to complete a goal-oriented task.
The true statements about computers are;
I. Computing devices are electronic: the components and parts which makes up a computer system are mainly powered by a power supply unit and motherboard that typically comprises of electronic components such as capacitors, resistors, diodes etc.
II. The CPU processes commands: the central processing unit (CPU) is responsible for converting or transforming the data from an input device into a usable format and sent to the output device.
III. The memory uses binary numbers: computer only understand ones and zeros.
Mark is a stockbroker in New York City. He recently asked you to develop a program for his company. He is looking for a program that will calculate how much each person will pay for stocks. The amount that the user will pay is based on:
The number of stocks the Person wants * The current stock price * 20% commission rate.
He hopes that the program will show the customer’s name, the Stock name, and the final cost.
The Program will need to do the following:
Take in the customer’s name.
Take in the stock name.
Take in the number of stocks the customer wants to buy.
Take in the current stock price.
Calculate and display the amount that each user will pay.
A good example of output would be:
May Lou
you wish to buy stocks from APPL
the final cost is $2698.90
ok sorry i cant help u with this
The Fast as Light Shipping company charges the following rates. Weight of the item being sent Rate per 100 Miles shipped 2kg or less. $0.25 Over than 2 kg but not more than 10 kg $0.30 Over 10 kg but not more than 20 kg. $0.45 Over 20 kg, but less than 50kg. $1.75 Write a program that asks for the weight of the package, and the distance to be sent. And then displays the charge.
Answer:
weight = float(input("Enter the weight of the package: "))
distance = float(input("Enter the distance to be sent: "))
weight_charge = 0
if weight <= 2:
weight_charge = 0.25
elif 2 < weight <= 10:
weight_charge = 0.3
elif 10 < weight <= 20:
weight_charge = 0.45
elif 20 < weight <= 50:
weight_charge = 1.75
if int(distance / 100) == distance / 100:
d = int(distance / 100)
else:
d = int(distance / 100) + 1
total_charge = d * weight_charge
print("The charge is $", total_charge)
Explanation:
*The code is in Python.
Ask the user to enter the weight and distance
Check the weight to calculate the weight_cost for 100 miles. If it is smaller than or equal to 2, set the weight_charge as 0.25. If it is greater than 2 and smaller than or equal to 10, set the weight_charge as 0.3. If it is greater than 10 and smaller than or equal to 20, set the weight_charge as 0.45. If it is greater than 20 and smaller than or equal to 50, set the weight_charge as 1.75
Since those charges are per 100 miles, you need to consider the distance to find the total_charge. If the int(distance / 100) is equal to (distance / 100), you set the d as int(distance / 100). Otherwise, you set the d as int(distance / 100) + 1. For example, if the distance is 400 miles, you need to multiply the weight_charge by 4, int(400/100) = 4. However, if the distance is 410, you get the int(400/100) = 4, and then add 1 to the d for the extra 10 miles.
Calculate the total_charge, multiply d by weight_charge
Print the total_charge
What are the two basic functions (methods) used in classical encryption algorithms?
substitution and transport
You can expect to see
Answer:
what?ㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ
Answer:
D
Explanation:
You can expect to see ________.
A. STOP signs or traffic lights on limited access highways
B. only traffic lights on limited access highways
C. only STOP signs on limited access highways
D. no STOP signs or traffic lights on limited access highways
In which cloud service model, virtual machines are provisioned? Iaas
Answer:
SaaS is the cloud service in which virtual machines are provisioned
During TCP/IP communications between two network hosts, information is encapsulated on the sending host and decapsulated on the receiving host using the OSI model. Match the information format with the appropriate layer of the OSI model.
a. Packets
b. Segments
c. Bits
d. Frames
1. Session Layer
2. Transport Layer
3. Network Layer
4. Data Link Layer
5. Physical Layer
Answer:
a. Packets - Network layer
b. Segments - Transport layer
c. Bits - Physical layer
d. Frames - Data link layer
Explanation:
When TCP/IP protocols are used for communication between two network hosts, there is a process of coding and decoding also called encapsulation and decapsulation.
This ensures the information is not accessible by other parties except the two hosts involved.
Operating Systems Interconnected model (OSI) is used to standardise communication in a computing system.
There are 7 layers used in the OSI model:
1. Session Layer
2. Transport Layer
3. Network Layer
4. Data Link Layer
5. Physical Layer
6. Presentation layer
7. Application layer
The information formats given are matched as
a. Packets - Network layer
b. Segments - Transport layer
c. Bits - Physical layer
d. Frames - Data link layer
According to the vulnerability assessment methodology, vulnerabilities are determined by which 2 factors?
Answer:
3 and 60!
Explanation:
g n this program, you will prompt the user for three numbers. You need to check and make sure that all numbers are equal to or greater than 0 (can use an if or if/else statement for this). You will then multiply the last two digits together, and add the result to the first number. The program should then start over, once again asking for another three numbers. This program should loop indefinitely in this way. If the user enters a number lower than 0, remind the user that they need to enter a number greater than or equal to 0 and loop the program again.
Answer:
In Python:
loop = True
while(loop):
nm1 = float(input("Number 1: "))
nm2 = float(input("Number 2: "))
nm3 = float(input("Number 3: "))
if (nm1 >= 0 and nm2 >= 0 and nm3 >= 0):
result = nm2 * nm3 + nm1
print("Result: "+str(result))
loop = True
else:
print("All inputs must be greater than or equal to 0")
loop = True
Explanation:
First, we set the loop to True (a boolean variable)
loop = True
This while loop iterates, indefinitely
while(loop):
The next three lines prompt user for three numbers
nm1 = float(input("Number 1: "))
nm2 = float(input("Number 2: "))
nm3 = float(input("Number 3: "))
The following if condition checks if all of the numbers are greater than or equal to 0
if (nm1 >= 0 and nm2 >= 0 and nm3 >= 0):
If yes, the result is calculated
result = nm2 * nm3 + nm1
... and printed
print("Result: "+str(result))
The loop is then set to true
loop = True
else:
If otherwise, the user is prompted to enter valid inputs
print("All inputs must be greater than or equal to 0")
The loop is then set to true
loop = True
most of the answers for this test is wrong.
b) Develop a truth table for expression AB+ C.
Consider an entity set Person, with attributes social security number (ssn), name, nickname, address, and date of birth(dob). Assume that the following business rules hold: (1) no two persons have the same ssn; (2) no two persons have he same combination of name, address and dob. Further, assume that all persons have an ssn, a name and a dob, but that some persons might not have a nickname nor an address.
A) List all candidate keys and all their corresponding superkeys for this relation.
B) Write an appropriate create table statement that defines this entity set.
Answer:
[tex]\pi[/tex]
Explanation:
In what way can an employee demonstrate commitment?
Answer:
Come to work on time ready to work. Always work above and beyond. ... Come to work on time, follow all rules, do not talk about people, and be positive get along with coworkers.
Explanation:
An employee can demonstrate commitment to their job and organization in several ways.
First and foremost, they show dedication and enthusiasm by consistently meeting deadlines, going above and beyond to achieve goals, and taking ownership of their responsibilities.
Being punctual and reliable also reflects commitment. Employees who actively participate in team efforts, support colleagues, and offer innovative ideas exhibit their dedication to the company's success.
Demonstrating a willingness to learn and grow by seeking additional training or taking on new challenges further showcases commitment.
Ultimately, a committed employee is driven by a genuine passion for their work, a strong work ethic, and a sense of loyalty to their organization's mission and values.
Know more about employee commitment:
https://brainly.com/question/34152205
#SPJ6
Write a program that will perform a few different String operations. The program must prompt for a name, and then tell the user how many letters are in the name, what the first letter of the name is, and what the last letter of the name is. It should then end with a goodbye message. A sample transcript of what your program should do is below:
Enter your name: Jeremy
Hello Jeremy!
Your name is 6 letters long.
Your name starts with a J.
Your name ends with a y.
Goodbye!
Answer:
Follows are the code to this question:
import java.util.*;//import package for user input
public class Main//defining a class Main
{
public static void main(String[] asp)//main method
{
String n;//defining String variable
Scanner oxr=new Scanner(System.in);//creating Scanner class Object
System.out.print("Enter your name: ");//print message
n=oxr.next();//input value
System.out.println("Hello "+n+"!");//print message with value
System.out.println("Your name is "+n.length()+" letters long.");//print message with value
System.out.println("Your name starts with a "+n.charAt(0)+".");//print message with value
System.out.println("Your name ends with a "+n.charAt(n.length()-1)+".");//print message with value
System.out.print("Goodbye!");//print message
}
}
Output:
Please find the attached file.
Explanation:
In the above-given code, A string variable "n" is declared, that uses the Scanner class object for input the value from the user-end.
In the next step, the multiple print method has used, which calculates the length, first and the last latter of the string value, and uses the print method to print the calculated value with the given message.
Please select the word from the list that best fits the definition Asking for review material for a test
Answer:
B
Explanation:
Answer:
B is the answer
Explanation:
In this programming assignment, you will write a simple program in C that outputs one string. This assignment is mainly to help you get accustomed to submitting your programming assignments here in zyBooks. Write a C program using vim that does the following. Ask for an integer input from the user. Do not print any prompt for input. If the number is divisible by 3, print the message CS If the number is divisible by 5, print the message 1714 If the number is divisible by both 3
Answer:
In C:
#include <stdio.h>
int main() {
int mynum;
scanf("%d", &mynum);
if(mynum%3 == 0 && mynum%5 != 0){
printf("CS"); }
else if(mynum%5 == 0 && mynum%3 != 0){
printf("1714"); }
else if(mynum%3 == 0 && mynum%5 == 0){
printf("CS1714"); }
else {
printf("ERROR"); }
return 0;
}
Explanation:
This declares mynum as integer
int mynum;
This gets user input
scanf("%d", &mynum);
This condition checks if mynum is divided by 3. It prints CS, if true
if(mynum%3 == 0 && mynum%5 != 0){
printf("CS"); }
This condition checks if mynum is divided by 5. It prints 1714, if true
else if(mynum%5 == 0 && mynum%3 != 0){
printf("1714"); }
This condition checks if mynum is divided by 3 and 5. It prints CS1714, if true
else if(mynum%3 == 0 && mynum%5 == 0){
printf("CS1714"); }
This condition checks if num cannot be divided by 3 and 5. It prints ERROR, if true
else {
printf("ERROR"); }
You've created a new programming language, and now you've decided to add hashmap support to it. Actually you are quite disappointed that in common programming languages it's impossible to add a number to all hashmap keys, or all its values. So you've decided to take matters into your own hands and implement your own hashmap in your new language that has the following operations:
insert x y - insert an object with key x and value y.
get x - return the value of an object with key x.
addToKey x - add x to all keys in map.
addToValue y - add y to all values in map.
To test out your new hashmap, you have a list of queries in the form of two arrays: queryTypes contains the names of the methods to be called (eg: insert, get, etc), and queries contains the arguments for those methods (the x and y values).
Your task is to implement this hashmap, apply the given queries, and to find the sum of all the results for get operations.
Example
For queryType = ["insert", "insert", "addToValue", "addToKey", "get"] and query = [[1, 2], [2, 3], [2], [1], [3]], the output should be hashMap(queryType, query) = 5.
The hashmap looks like this after each query:
1 query: {1: 2}
2 query: {1: 2, 2: 3}
3 query: {1: 4, 2: 5}
4 query: {2: 4, 3: 5}
5 query: answer is 5
The result of the last get query for 3 is 5 in the resulting hashmap.
For queryType = ["insert", "addToValue", "get", "insert", "addToKey", "addToValue", "get"] and query = [[1, 2], [2], [1], [2, 3], [1], [-1], [3]], the output should be hashMap(queryType, query) = 6.
The hashmap looks like this after each query:
1 query: {1: 2}
2 query: {1: 4}
3 query: answer is 4
4 query: {1: 4, 2: 3}
5 query: {2: 4, 3: 3}
6 query: {2: 3, 3: 2}
7 query: answer is 2
The sum of the results for all the get queries is equal to 4 + 2 = 6.
Input/Output
[execution time limit] 4 seconds (py3)
[input] array.string queryType
Array of query types. It is guaranteed that each queryType[i] is either "addToKey", "addToValue", "get", or "insert".
Guaranteed constraints:
1 ≤ queryType.length ≤ 105.
[input] array.array.integer query
Array of queries, where each query is represented either by two numbers for insert query or by one number for other queries. It is guaranteed that during all queries all keys and values are in the range [-109, 109].
Guaranteed constraints:
query.length = queryType.length,
1 ≤ query[i].length ≤ 2.
[output] integer64
The sum of the results for all get queries.
[Python3] Syntax Tips
# Prints help message to the console
# Returns a string
def helloWorld(name):
print("This prints to the console when you Run Tests")
return "Hello, " + name
Answer:
Attached please find my solution in JAVA
Explanation:
long hashMap(String[] queryType, int[][] query) {
long sum = 0;
Integer currKey = 0;
Integer currValue = 0;
Map<Integer, Integer> values = new HashMap<>();
for (int i = 0; i < queryType.length; i++) {
String currQuery = queryType[i];
switch (currQuery) {
case "insert":
HashMap<Integer, Integer> copiedValues = new HashMap<>();
if (currKey != 0 || currValue != 0) {
Set<Integer> keys = values.keySet();
for (Integer key : keys) {
copiedValues.put(key + currKey, values.get(key) + currValue);
}
values.clear();
values.putAll(copiedValues);
currValue = 0;
currKey = 0;
}
values.put(query[i][0], query[i][1]);
break;
case "addToValue":
currValue += values.isEmpty() ? 0 : query[i][0];
break;
case "addToKey":
currKey += values.isEmpty() ? 0 : query[i][0];
break;
case "get":
copiedValues = new HashMap<>();
if (currKey != 0 || currValue != 0) {
Set<Integer> keys = values.keySet();
for (Integer key : keys) {
copiedValues.put(key + currKey, values.get(key) + currValue);
}
values.clear();
values.putAll(copiedValues);
currValue = 0;
currKey = 0;
}
sum += values.get(query[i][0]);
}
}
return sum;
}