The combustion of 136 g of methane (CH₄) in the presence of excess oxygen gas produces 353 g of carbon dioxide. [CH₄ + 2O₂ --> CO₂ + 2H₂O; C = 12.01 g/mol, H = 1.01 g/mol, O = 16.0 g/mol]

What is the percent yield?

a.)
0.385
b.)
0.026
c.)
0.947
d.)
0.00946

The standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.

What is standard change?

To find the standard change in Gibbs free energy of the reaction, we need to use the following equation:

ΔG° = -RT ln(K)

where ΔG° is the standard change in Gibbs free energy, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (25 °C = 298 K), and K is the equilibrium constant.

To find K, we need to use the equilibrium partial pressures:

K = (PC × PD) / (PA × PB²)

where PA, PB, PC, and PD are the equilibrium partial pressures of A, B, C, and D, respectively.

Substituting the values, we get:

K = (5.47 atm × 5.63 atm) / (5.63 atm × (5.00 atm)²)

K = 0.6176

Now we can calculate the standard change in Gibbs free energy:

ΔG° = -RT ln(K)

ΔG° = -(8.314 J/mol·K) × (298 K) × ln(0.6176)

ΔG° = -1,690 J/mol or -1.69 kJ/mol

Therefore, the standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.

What is free energy?

Free energy, also known as Gibbs free energy, is a thermodynamic quantity that represents the amount of energy in a system that is available to do work at a constant temperature and pressure. It is denoted by the symbol G and is expressed in units of joules (J) or calories (cal).

In simple terms, free energy is the energy that can be used to do work. It is defined by the equation:

ΔG = ΔH - TΔS

where ΔH is the change in enthalpy (heat content) of the system, ΔS is the change in entropy (disorder) of the system, and T is the absolute temperature in Kelvin.

If ΔG is negative, the reaction is spontaneous and can proceed without the input of external energy. If ΔG is positive, the reaction is non-spontaneous and requires energy input to proceed. If ΔG is zero, the system is at equilibrium.

To know more about free energy, visit:

https://brainly.com/question/14150518

#SPJ1

5,250. The number was rounded up from 5,249 because the last digit, 9, is greater than or equal to 5.

Rounding up is a mathematical operation that involves increasing a number to its nearest whole number. It is commonly used when dealing with money, measurements, or statistics. When rounding up, the number is increased to the next highest whole number. For example, if a number is 6.7, it would be rounded up to 7. Rounding up is often used when dealing with exact measurements or estimates to simplify the calculations. It can also be used to make the results of a calculation easier to understand. In the case of money, rounding up can be used to round a number to the nearest dollar. This prevents dealing with fractional amounts of money. Rounding up can also be utilized in statistical analysis, such as in the calculation of mean or median. This simplifies the data and prevents dealing with fractions or decimals.

To learn more about  rounded up

https://brainly.com/question/17396482

#SPJ9

The elements that have an outer electron configuration of ms2nd2 are located in the d-block of the periodic table and include some of the transition metals and lanthanides.

To determine which elements in the periodic table have this outer electron configuration, you can look at the position of the d-block elements in the table. The d-block elements are located in the middle of the table and include the transition metals. These elements have partially filled d orbitals, which can accommodate up to 10 electrons.

Elements in the d-block with an atomic number of 21 through 30 (scandium through zinc) have an outer electron configuration of d10s2 and do not fit the ms2nd2 configuration. However, elements in the d-block with an atomic number of 39 through 48 (yttrium through cadmium) have an outer electron configuration of d10s2p1 and can have the ms2nd2 configuration by removing the single electron in the p orbital. Elements in the d-block with an atomic number of 57 through 80 (lanthanum through mercury) also have the possibility of having an outer electron configuration of ms2nd2.

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution.

(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:

[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M

The acid dissociation constant (Ka) can then be calculated using the equation:

Ka = [H+][A-]/[HA]

where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:

α = [A-]/[HA]

Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:

[A-] ≈ 0.500α

[HA] ≈ 0.500 - 0.500α

Substituting these expressions into the equation for Ka, we get:

Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α

≈ ([H+]/Ka)(0.500α)/(1-α)

Solving for Ka, we get:

Ka ≈ H+/0.500α

Substituting the values we have calculated, we get:

Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)

Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).

(b) To find the percentage of acid that is ionized in the solution, we can use the equation:

α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))

where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:

α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008

Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.

Learn more about dissociation constant from

https://brainly.com/question/30930515

#SPJ1

To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution.

(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:

[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M

The acid dissociation constant (Ka) can then be calculated using the equation:

Ka = [H+][A-]/[HA]

where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:

α = [A-]/[HA]

Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:

[A-] ≈ 0.500α

[HA] ≈ 0.500 - 0.500α

Substituting these expressions into the equation for Ka, we get:

Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α

≈ ([H+]/Ka)(0.500α)/(1-α)

Solving for Ka, we get:

Ka ≈ H+/0.500α

Substituting the values we have calculated, we get:

Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)

Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).

(b) To find the percentage of acid that is ionized in the solution, we can use the equation:

α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))

where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:

α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008

Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.

Learn more about dissociation constant from

brainly.com/question/30930515

#SPJ1

A concentrated saltwater solution weighing 29.97 g and fitting into a flask to the mark of 25.0 ml has a density of about 1199.2 g/L.

By dividing the solution's mass by its volume, we may get its density: density = mass/volume

We need to know the density of water at the solution's temperature as well as the capacity of the flask up to the 25.0 ml level in order to calculate the volume of the solution.

Since 1 mL = 0.001 L, volume is equal to 25.0 mL, or 0.0250 L.

Now, we may determine the solution's density as follows:

1199.2 g/L or 29.97 g/0.0250 L is what is referred to as density.

To learn more about density visit:

brainly.com/question/26279986

#SPJ9

The molality of the solution is 1.080 mol/kg of a 48 grams of MgCl2 is dissolved in 500g of water, density of water = 1 kg/1L.

Taking the moles of solute and dividing it by the kilograms of solvent yields the molality of a solution.

Molality is calculated as follows: kg of solvent/kg of solute

500 g, or 0.500 kg, is the mass of the solvent.

MgCl2 molecular weight divided by its mass gives the amount of moles.

48 g / 95.2 g m o l 1 equals the quantity of moles of magnesium chloride.

0.504 moles of MgCl2 are present in one mole.

Molality is calculated as 0.504moles per kilogram.

Molality is equal to 1.080 mol k g 1.

As stated in the definition, molality is the "total moles of a solute contained in a kilogram of a solvent." The terms "molality" and "molal concentration" are synonymous. It is a measurement of a solvent.

For more information on molality kindly visit to

https://brainly.com/question/26921570

#SPJ1

The mass of calcium in the original urine sample would be 0.0140 g.

First, we need to find the masses of calcium and magnesium oxalates in the original sample. Let x be the mass of calcium oxalate and y be the mass of magnesium oxalate. Then we have:

x + y = mass of the mixed oxalate precipitate

Next, we need to use the information given to find the mass of calcium in the original sample. The mass of calcium oxide formed after ignition is equal to the mass of calcium oxalate in the original sample. We can calculate the mass of calcium oxide using the mass of calcium carbonate formed and the molar mass ratio of calcium carbonate to calcium oxide.

The balanced chemical equations for the reactions are:

CaC2O4 -> CaCO3 + CO2

CaCO3 -> CaO + CO2

The molar mass of CaCO3 is 100.09 g/mol, and the molar mass of CaO is 56.08 g/mol.

From the given information, we have:

0.0433 g = (x + y)(100.09 g/mol + 80.15 g/mol) / (128.10 g/mol + 80.15 g/mol)

0.0285 g = x(56.08 g/mol) + y(40.31 g/mol)

Solving these equations simultaneously, we get:

x = 0.0140 g

y = 0.0053 g

Therefore, the mass of calcium in the original sample (which is equal to the mass of calcium oxide formed after ignition) is:

0.0140 g

So the mass of calcium in the original sample is 0.0140 g.

More on stoichiometric problems can be found here: https://brainly.com/question/29775083

#SPJ1

Enantiomers rotate the plane of polarized light in opposite directions, and this property is used to distinguish between them in a process called optical rotation.

Enantiomers are pairs of molecules that are non-superimposable mirror images of each other.

They are isomers, meaning they have the same molecular formula and connectivity but differ in their three-dimensional arrangement of atoms in space.

Enantiomers exhibit identical physical and chemical properties, except for their interaction with plane-polarized light (a type of light that oscillates in a single plane).

Learm= more about enantiomers at: https://brainly.com/question/30216513

#SPJ1

The sandwich contains approximately 71.25 grams of carbohydrates.

Calories are a unit of measurement used to quantify the amount of energy contained in food and beverages. The number of calories in a particular food is determined by the amounts of carbohydrates, fats, proteins, and other nutrients it contains.

To determine the number of grams of carbohydrates in the sandwich, we need to use the fact that carbohydrates, fats, and proteins have different calorie densities. Specifically, carbohydrates and proteins each contain about 4 calories per gram, while fats contain about 9 calories per gram.

First, let's calculate the total number of calories coming from the fat and protein in the sandwich:

Total calories = calories from carbohydrates + calories from fat + calories from protein

475 Calories = calories from carbohydrates + 10g x 9 Calories/g + 25g x 4 Calories/g

475 Calories = calories from carbohydrates + 90 Calories + 100 Calories

475 Calories - 190 Calories = calories from carbohydrates

285 Calories = calories from carbohydrates

Now that we know the number of calories from carbohydrates, we can use the calorie density of carbohydrates to determine the number of grams of carbohydrates:

285 Calories = carbohydrates in grams x 4 Calories/g

71.25 g = carbohydrates in grams

Therefore, the sandwich contains approximately 71.25 grams of carbohydrates.

Learn more about calories here:

https://brainly.com/question/22374134

#SPJ9

463.5 grams of HCl are required to react with 6.35 moles of CaCO₃.

Mass of one mole of substance is referred to as the molar mass. The molar mass of a substance can be calculated by adding up the atomic masses of all the atoms in a molecule.

Balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is: CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂

6.35 mol CaCO₃ * 2 mol HCl / 1 mol CaCO₃ = 12.7 mol HCl

Now, we use the molar mass of HCl (36.46 g/mol) to convert from moles to grams: 12.7 mol HCl * 36.46 g/mol = 463.5 g HCl

Therefore, 463.5 grams of HCl are required to react with 6.35 moles of CaCO₃.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ1

Answer:

Explanation:

dilute solutions of hydrochloric acid (HCl), sulphuric acid (H₂SO₄), and nitric acid (HNO₃) react with active metals to produce a salt and hydrogen gas.

Active metals react strongly and quickly with other elements and compounds due to the electrons in its structure and its ease of sharing the electrons with other elements.

The most active metals are found in Groups 1  and 2 of the Periodic Table (i.e. the left side), and include lithium, potassium, magnesium, and calcium. Metals such as aluminium, lead, and zinc, are less active than magnesium or calcium, but are generally still labelled as 'active'. Metals such as copper, gold, or silver are inactive and will not react.

Therefore, in the provided question, all the metals listed, except for copper, will produce a metal salt + hydrochloric acid. Copper will not react.

In general:

The correct answer that represents beta decay is

In beta decay, a neutron in the nucleus is converted into a proton, and an electron (or beta particle) and an antineutrino are emitted from the nucleus.

In this case, a neutron in the 164Gd nucleus is converted into a proton, and an electron is emitted from the nucleus, resulting in the production of 164Tb.

Option A is not a valid representation of any known type of radioactive decay.

Option B represents alpha decay, in which an alpha particle is emitted from the nucleus.

Option C represents electron capture, in which an electron is captured by the nucleus.

Learn more about beta decay at

https://brainly.com/question/27770519

#SPJ1

40 grams of KCl are dissolved in 100 mL of water at 45C. 5g of  additional grams of KCI are needed to make the solution saturated at 80 C as the solubility of KCl is 45g/ml

A uniform combination of a number of solutes within a solvent is referred to as a solution. One frequent illustration of a Solution is adding sugar cubes into your cup of tea and coffee. Solubility is the quality that makes sugar molecules more soluble.

In water, potassium chloride (KCl) dissolves. Its water solubility, like that of all other solutes, depends on temperature. The solubility of a salt increases as the solvent's temperature rises. This is fairly simple to experience with sugar. 40 grams of KCl are dissolved in 100 mL of water at 45C. 5g of  additional grams of KCI are needed to make the solution saturated at 80 C as the solubility of KCl is 45g/ml.

To know more about solubility, here:

https://brainly.com/question/29661360

#SPJ1

3.0 moles of [tex]Al[/tex] can fully react with hydrogen chloride to produce 4.5 moles of [tex]H_{2}[/tex]. Thus, 0.93 moles will be produced by 0.62 moles of [tex]Al[/tex].

For more information on stoichiometry kindly visit to

https://brainly.com/question/19484482

#SPJ1

The maximum mass of carbon dioxide that could be produced from 6.9 g of octane and 42.2 g of oxygen is 21.3 g, rounded to 2 significant digits.

What is Octane?

Octane is a hydrocarbon with the chemical formula [tex]C_{8} H_{18}[/tex] It is an organic compound belonging to the alkane group, which means it consists of only carbon (C) and hydrogen (H) atoms bonded together by single covalent bonds. Octane is a colorless liquid with a molecular weight of approximately 114 g/mol and is commonly used as a component in gasoline or fuel for internal combustion engines.

From the balanced equation, we know that 1 mole of octane reacts with 12.5 moles of oxygen to produce 8 moles of carbon dioxide. Therefore, 0.0605 mol of octane would require 0.0605 mol x 12.5 = 0.75625 mol of oxygen to fully react.

Since we have only 1.32 mol of oxygen, which is in excess compared to the 0.75625 mol required by octane, oxygen is the excess reactant, and octane is the limiting reactant.

Now, we can use the stoichiometry of octane to carbon dioxide to calculate the maximum mass of carbon dioxide produced:

From the balanced equation, we know that 1 mole of octane produces 8 moles of carbon dioxide.

Molar mass of carbon dioxide (CO2) = 44.01 g/mol

Maximum moles of carbon dioxide produced from octane = 0.0605 mol x 8 = 0.484 mol

Maximum mass of carbon dioxide produced from octane = 0.484 mol x 44.01 g/mol = 21.3 g

Remember to round the final answer to 2 significant digits as requested.

Learn more about Octane from the given link

https://brainly.com/question/28469125

#SPJ1

Answer:

strength in ionic compounds.

Explanation:

:)

Lattice energy is an estimate of the bond of strength. It denotes the amount of energy required to break down one mole of a solid ionic compound into its constituent gaseous ions.

The strength of an ionic compound's ionic bonds is measured by lattice energy. It explains several properties of ionic solids, including their volatility, solubility, and hardness. An ionic solid's lattice energy cannot be measured directly.

The higher an ionic compound's lattice energy, the more difficult it is to disassemble the crystal lattice structure and dissolve it in water. As a result, compounds with high lattice energies are less soluble in water than those with low lattice energies.

The value of lattice energy is determined by the charges on the two ions as well as the distance between them. The distance between the ions is directly proportional to their size.

To know more about Lattice Energy visit:

https://brainly.com/question/20590677

#SPJ1

Complete question:

Lattice energy is an estimated bond of the bond:

A. conductivity

B. group

C. length

D. strength

Choose the correct option.

The amount that would remain, given that 3 half-lives has pass when you started with 20.0 g is 2.50 grams (1st option)

The following data were obtained from the question:

The amount remaining can be obtained as shown below:

N = N₀ / 2ⁿ

N = 20 / 2³

N = 20 / 8

N = 2.50 grams

Thus, we can conclude from the above calculation that the amount that would remain after 3 half-lives to pass is 2.50 grams (1st option)

Learn more about amount remaining:

https://brainly.com/question/28440920

#SPJ1

Answer:

2.50g

Explanation:

Answer:

Molecules in the skin are moving faster than molecules in the glass.

Explanation:

Put it in your own words.

Answer:

The energy from the ice transferred to the glass.

Answer: The units for molarity are moles/liter.

Similarly, the equation to find molarity is moles divided by liters.

Explanation:  

mol / L is a unit of molar concentration. These are the number of moles of dissolved material per liter of solution. 1 mol / L is also called 1M or 1molar. Mol / m3 is also a unit of molar concentration.

Molarity is expressed in units of moles per liter (mol / L). This is a very common unit, so it has its own symbol, which is the uppercase M. A solution with a concentration of 5 mmol / l is called a 5 M solution or has a concentration value of 5 mol.

The molar concentration of the solution is equal to the number of moles of the solute divided by the mass of the solvent (kilogram), and the molar concentration of the solution is equal to the number of moles of the solute divided by the volume of the solution (liter). increase.

The direction of the reaction, as written, spontaneous at 25 ∘C and standard pressure is reverse.

To calculate the value of Δ∘rxn at 25.0 ∘C, we can use the equation:

Δ∘rxn(T2) = Δ∘rxn(T1) + ΔH∘(products) - ΔH∘(reactants)

where;

Using the data from the table of thermodynamic properties, we can look up the enthalpy change of formation values for C2H4(g), H2O(l), and C2H5OH(l):

ΔH∘f(C2H4(g)) = 52.26 kJ/mol

ΔH∘f(H2O(l)) = -285.83 kJ/mol

ΔH∘f(C2H5OH(l)) = -277.69 kJ/mol

Substituting these values into the equation, we get:

Δ∘rxn(25.0 ∘C) = -44.2 kJ + (-277.69 kJ/mol) - (-52.26 kJ/mol)

Δ∘rxn(25.0 ∘C) = -44.2 kJ - (-277.69 kJ/mol) + 52.26 kJ/mol

Δ∘rxn(25.0 ∘C) = -44.2 kJ + 277.69 kJ/mol + 52.26 kJ/mol

Δ∘rxn(25.0 ∘C) = 233.23 kJ/mol

So the value of Δ∘rxn at 25.0 ∘C is 233.23 kJ/mol.

In which direction is the reaction, as written, spontaneous at 25 ∘C and standard pressure?

Since the value of Δ∘rxn at 25.0 ∘C is positive (233.23 kJ/mol), the reaction as written is not spontaneous at this temperature and standard pressure. The correct answer is "reverse."

Learn more about enthalpy change here: https://brainly.com/question/16387742

#SPJ1

To convert to Celsius, we subtract 273.15 from the Kelvin temperature, giving us a final answer of 42.1°C.

Temperature is a physical quantity that measures the average kinetic energy of the particles in a system. It is an important parameter for understanding the behavior of matter and the underlying physical processes at work. Temperature is measured in units such as degrees Celsius (°C), Fahrenheit (°F), Kelvin (K), or Rankine (°R). Temperature affects the rate at which chemical reactions occur and the movement of particles in solids, liquids, and gases.

The ideal gas law states that PV = nRT,
where n is the number of moles,
P is the pressure,
V is the volume, R is the ideal gas constant (8.314 J/molK), and
T is the temperature in Kelvin.
Rearranging the equation, we get T = (PV)/(nR).
Plugging in our values, we get T = (89.9 atm * 4191 mL)/(2.6 mol * 8.314 J/molK) = 115.2 K.
To convert to Celsius, we subtract 273.15 from the Kelvin temperature, giving us a final answer of 42.1°C.

To learn more about temperature
https://brainly.com/question/27988898
#SPJ1

The molecular formula of the compound, given that it contains 51.39% carbon, 8.64% hydrogen, and 39.97% nitrogen is C₆H₁₂N₄

To obtain the molecular formula, we must first determine the empirical formula. Details on how to obtain the empirical formula is given beloww:

Divide by their molar mass

C = 51.39 / 12 = 4.283

H = 8.64 / 1 = 8.64

N = 39.97 / 14 = 2.855

Divide by the smallest

C = 4.283 / 2.855 = 1.5

H = 8.64 / 2.855 = 3

N = 2.855 / 2.855 = 1

Multiply through by 2 to express in whole number

C = 1.5 × 2 = 3

H = 3 × 2 = 6

N = 1 × 2 = 2

Thus, we can conclude that the empirical formula is C₃H₆N₂

Finally, we shall determine the molecular formula. Details below

Molecular formula = empirical × n = mass number

[C₃H₆N₂]n = 140.22

[(12×3) + (1×6) + (14×2)]n = 140.22

70n = 140.22

Divide both sides by 70

n = 140.22 / 70

n = 2

Molecular formula = [C₃H₆N₂]n

Molecular formula = [C₃H₆N₂]₂

Molecular formula = C₆H₁₂N₄

Learn more about molecular formula:

https://brainly.com/question/21568927

#SPJ1

Answer:

The answer is B: 0.0025 M

According to molar concentration and dilution concept, the  [H₃O+] in the final solution is closest to 0.05 M.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions concentrated and diluted it is calculated as, M₁V₁=M₂V₂ substitution gives M₂=0.25×100/500=0.05

Learn more about molar concentration,here:

https://brainly.com/question/15532279

#SPJ2