the coordinates of three points are (2, 2), (4, 2), and (3, 3). what is the area of the triangle formed by connecting these three points?

The proper interpretation of the slope coefficient b1 in a linear regression line is that, on average, a 1 unit increase in the explanatory variable causes a b1 increase in the response is true since slope is change in dependent variable.

The slope coefficient, bi, for independent variable Xi (where i can be 1, 2, 3, …, k) can be interpreted as the change in the probability that Y equals 1 resulting from a unit increase in Xi when the remaining independent variables are held constant.

The parameters or unknowns in the line are B1 and Bo. The value of y at x=0, or the y-intercept, is called Bo. B1 is the slope, or how much y shifts as x increases by one unit.

The estimated regression coefficient b1 in the multiple linear regression equation measures the relationship between risk factor X1 and outcome after adjusting for X2 (b2 is the estimated regression coefficient that quantifies the association between the potential confounder and the outcome).

To learn more about linear regression visit : brainly.com/question/29665935

#SPJ4

The value of x is for the given polygons is 5.

In the given figure it is given that both the polygons are similar . They are just looking different. We can say that they are equivalent quadrilaterals.

From the figure , we can see that SR is equivalent to TW and PQ is equivalent to UV. Side PS is equivalent to TU and RQ is equivalent to WV.

So the the ration of the sides of length will also be equal.

∴ SR/PQ = TW/UV

⇒ x+1/ (10/3) = 9/5

⇒ x+1= 6

⇒x=5

Therefore, The value of x is for the given polygons is 5.

Learn more about polygons here:

https://brainly.com/question/1592456

The correct question is:

Find the value of x for the given polynomials. It is given that both polynomials are similar.

The required scale factor for the resized image is 110.25:1.

The scale factor is defined as the ratio of the modified change in length to the original length.

Here,
The original photo is 4 inches by 6 inches.
The dimensions of the resized image is 3.5 ft by 5.25 ft,
1 feet = 12 inches

As of the definition mentioned above

Scale factor = 3.5 × 12 × 5.25 × 12 / 4×6
Scale factor = 110.25:1

Thus, the required scale factor for the resized image is 110.25:1.

Learn more about Scale factors here:

https://brainly.com/question/22312172

#SPJ1

Answer:

3x = 42

Step-by-step explanation:

The correct equation is

3x = 42

However, because your formatting has been scrambled, I cannot tell you which choice it is

Compare this equation with your original question and see which is the correct choice

3x = 42 means

each kite = 42/3 = $14
but the question is only asking for the equation not the solution

You can mail the cookie to brainly :)

Answer:

Good luck

:/ :/ :/ :/ :/ :/ :/

Answer:

Step-by-step explanation:

just look at its last number

The value of x is -6.05 so that the expression (2.1 - 0.7) + (x + 3.4) is equivalent to -3.95 + 2.7.

We determine the value of x by solving the expression.

In the question;

(2.1 - 0.7) + (x + 3.4) is equivalent to -3.95 + 2.7

Finding the value of the variable is part of solving an algebraic expression. We must perform certain algebraic operations to determine the value of one of the variables in the linear equations before we can substitute that value to determine the value of another variable.

We can write it as

(2.1 - 0.7) + (x + 3.4) = -3.95 + 2.7

Simplify the expression

1.4 + x + 3.4 = -1.25

x + 4.8 = -1.25

Subtract 4.8 on both side, we get

x = -6.05

To learn more about solving the expression link is here

brainly.com/question/15005607

#SPJ4

The complete equation is:

Enter the value of x so that the expression

(2.1 - 0.7) + (x + 3.4) is equivalent to -3.95 + 2.7.

A cubic centimeter is 1000 times larger than a cubic millimeter because 1 centimeter equals 10 millimeters, and a volume is calculated by multiplying the length.

Width and height, so 1cm x 1cm x 1cm = 1cm3 and 0.1mm x 0.1mm x 0.1mm = 0.001mm3. A measure of volume in the metric system. One thousand boxy centimeters equal one liter. Also called cc, milliliter, and mL.  

A cubic centimeter ( symbol cm ³ or cc)(U.S. spelling boxy centimeter) is a generally used unit of volume extending the deduced SI-unit boxy meter. It corresponds to the volume of a  cell measuring 1 cm × 1 cm × 1 cm.

To learn more about cubic centimeters, visit here

https://brainly.com/question/9740005

#SPJ4

A cubic centimetre is 1000 times greater than a cubic millimetre.

A volume is derived by multiplying the length, width and height.

As we know.

1 centimetre equals 10 millimetres.

Therefore 0.1mm x 0.1mm x 0.1mm = 0.001mm^3

And 1cm x 1cm x 1cm = 1cm^3.

A volumetric measurement using the metric system.

One litre is equivalent to one thousand boxy centimetres. Also known as cc, mL, and millilitre.

A cubic centimetre, often known as a boxy centimetre in the United States, is a commonly used volume measurement unit that extends the SI unit boxy metre. It is equivalent to the volume of a cell with dimensions of 1cm x 1cm x 1cm

For more questions on boxy centimetre

https://brainly.com/question/11055519

#SPJ4

The coordinates of point A are given as follows:

A(19, 23).

The coordinates of point A are obtained applying the proportions in the context of this problem.

The segment AB is represented as follows:

AB = B - A.

Hence the segment 5AB is given as follows:

5AB = 5(B - A) = 5B - 5A.

Then the x-coordinate of A is obtained as follows:

5(16) - 5A = -15

5A = 95

A = 19.

The y-coordinate of A is obtained as follows:

5(30) - 5A = 35

5A = 115

A = 23.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

Answer: Jayda finishes 39 pages in 1 hour

Step-by-step explanation:

156/4 gives us her rate since we have to find 1 hour, not 4 hours.
This is 39

I hope this way able to help you :D

Answer: 0.3

Step-by-step explanation: 4+5=9. 3/9 times you will pull out grey socks. 3 Divided by 9 is .3333(forever). which is just .3 I think.

Lower class limits are 15, 25, 35, 45, 55, 65, 75, Upper class limits are 24, 34, 44, 54, 64, 74, 84, Class width are 10 (all classes have a width of 10), Class midpoints are 19.5, 29.5, 39.5, 49.5, 59.5, 69.5, 79.5, Class boundaries are [15, 25), [25, 35), [35, 44), [45, 54), [55, 64), [65, 74), [75, 84) and Number of individuals included in the summary is 76.

Here are the details for the given frequency distribution:

Lower class limits are the least number among the pair

Here, Lower class limits are 15, 25, 35, 45, 55, 65, 75 respectively.

Upper class limits are the greater number among the pair

Here, upper limit class are 24, 34, 44, 54, 64, 74, 84 respectively.

Class width is the difference between the Lower class limits and Upper class limits which is 10 (all classes have a width of 10).

Class midpoints is the middle point of the lower class limits and Upper class limits which is 19.5, 29.5, 39.5, 49.5, 59.5, 69.5, 79.5 respectively.

Class boundaries are the extreme points of the classes which are  [15, 25), [25, 35), [35, 44), [45, 54), [55, 64), [65, 74), [75, 84) respectively.

Number of individuals = 27 + 33 + 14 + 4 + 6 + 1 + 1

                                     = 76

To learn more about Lower class limits here:

https://brainly.com/question/29027902

#SPJ4

A zero correlation indicates that there is no relationship between 2 variables.

The relationship between variables is described by correlation. It can be either strong or weak, as well as positive or negative. Correlation is a statistical measure that expresses how closely two variables are related linearly (meaning they change together at a constant rate). It's a common tool for describing simple relationships without stating a cause and effect relationship. A correlational study can yield three outcomes: a positive correlation, a negative correlation, or no correlation. A positive correlation is a two-variable relationship in which both variables move in the same direction.

Here,

A correlation of zero indicates that no relationship exists between two variables.

To know more about correlation,

https://brainly.com/question/30016867

#SPJ1

The 2 digit number is 45 which becomes 5/6th of itself when its digits reversed.

A number is a numerical unit of measurement and labelling in mathematics. The natural numbers 1, 2, 3, 4, and so on are the first examples.

Let the two digits of the number are x and y.

So, the number is 10x + y.

When its digits reversed: the number becomes: (10y + x)

According to the question:

(10y + x) = 5/6 (10x + y)

60y + 6x = 50x + 5y

60y - 5y = 50x - 6x

55x = 44y

x/y = 44/55

x/y = 4/5

Hence, the two digits of the number are 4 and 5 and the number is 45.

Learn more about number here:

https://brainly.com/question/17429689

#SPJ1

The answer to the above graphing problem is that we can easily infer that the graph will initially begin to decline before quickly increasing.

A graph is a mathematical structure that joins a number of points together to represent a certain function. It establishes a pairwise link between the things. The vertices of a network, also known as its nodes, are the edges that link them (lines).

The graph's objective is to graphically portray numerical data for rapid, easy, and clear comprehension. Consequently, graphs are visual representations of data. Data can also be presented as a table, despite the fact that a graphical depiction is simpler to grasp.

Here,

If she first moves in the direction of the petrol station, the graph will be lowering.

As she fills her tank at the gas station, the graph moves upward.

As she approaches the market, the graph will eventually start to decline.

In light of the information,

We can easily deduce that the graph will start out falling, quickly climb, and then keep falling until we reach our target.

As a result, we can quickly deduce that the graph will rapidly increase after initially dropping as the answer to the given graph problem.

Learn more about Graph click here:

brainly.com/question/26865

#SPJ1

Answer:

Multiplying by 10 would be the inverse operation

Answer:

Multiplication

Step-by-step explanation:

The inverse operation of division is multiplication and vice versa.

:)

1.6% change in the level of oxygen for each 1000 feet of level change.

let the oxygen level at ground be x

so the oxygen level at 2000 feet above sea level is 0.18x

ans the oxygen level at 4500 feet above sea level is 0.14x

so total change = 0.04x for 2500 feet

so per feet height change  = 0.04x/2500

for every 1000 feet of elevation change the percentage change is given by  = (0.04*1000)/2500

=> 0.016x

so percentage change = 0.016x/x * 100

=> 1.6 %

so for every 1000 feet 1.6% change in the oxygen level is observed at that elevation.

To know more about  percentage click on below link:

https://brainly.com/question/29306119#

#SPJ4

For every 1000 feet of elevation variation, the oxygen level changes by 1.6%.

In most cases, elevation is used to describe locations on the surface of the Earth, whereas altitude or geopotential height is used to describe locations above the surface, such as those of flying airplanes or orbiting satellites, and depth is used to describe locations below the surface.

Let the ground's oxygen level be x.

the oxygen concentration is 0.18x at 2000 feet above sea level.

ans the oxygen concentration is 0.14x at 4500 feet above sea level.

hence the overall change for 2500 feet is 0.04x.

as a result, per foot height change, 0.04x/2500

The formula is (0.04*1000)/2500, where 1000 feet of elevation change equals 1000 feet of change in percentage.

=> 0.016x

Consequently, % change = 0.016x/x * 100.

=> 1.6 %

Therefore, at that elevation, there is a 1.6% variation in the oxygen level for every 1000 feet.

To know more about  percentage elevation click on below link:

brainly.com/question/29306119#

#SPJ4

The practical range of the function is between $100 and $625.

This can be calculated using the formula y=10x, where x is the number of subscriptions sold each week and y is the amount of money earned. To calculate the amount of money earned for selling t subscriptions each week, we can use the formula y = 10t. This can be interpreted as saying the amount of money (y) is equal to 10 times the number of subscriptions sold (t). For example, if Clarence sells 15 subscriptions each week, then we can calculate the amount of money he earns by plugging in t = 15. y = 10(15) = 150. This means Clarence earns $150 each week by selling 15 subscriptions. For example, if Clarence sells 10 subscriptions each week, he would earn $100 (10 x 10 = 100). If he sells 25 subscriptions each week, he would earn $625 (25 x 25 = 625). The practical range of the function is therefore $100 to $625.

Learn more about range of the function here:

https://brainly.com/question/21027387

#SPJ4

The points with integer coordinates in this rectangular region will be above 50.

You must use graph paper and draw the rectangle. You must draw the picture in order to solve the problem. It is not easy to visualize the rectangle, the coordinates and count the points inside it all at the same time without a picture to help you. You must draw it.


Once you draw it, the vertices are (5,4), (5,-4), (-5,-4) and (-5,4) in the clockwise directions starting from the upper left corner.

Since we are interested in points that are strictly inside the rectangle -4 < y < 4 and -5 < x < 5;
That is y = -3,-2,-1,0,1,2,3 and x = -4,-3,-2,-1,0,1,2,3,4


The points with integer coordinates that are strictly inside the rectangle are then:



(-4,3)   (-3,3),   (-2,3),   (-1,3),   (0,3),   (1,3),   (2,3),   (3,3),  (4,3)
(-4,2)   (-3,2),   (-2,2),   (-1,2),   (0,2),   (1,2),   (2,2),   (3,2),  (4,2)
(-4,1)   (-3,1),   (-2,1),    (-1,1),  (0,1),   (1,1),    (2,1),  (3,1),  (4,1)
(-4,0)   (-3,0),   (-2,0),    (-1,0)   (0,0),   (1,0),    (2,0),   (3,0),  (4,0)
(-4,-1)  (-3,-1),  (-2,-1),  (-1,-1), (0,-1),  (1,-1),  (2,-1),  (3,-1), (4,-1)
(-4,-2) (-3,-2),   (-2,-2), (-1,-2),  (0,-2),  (1,-2),  (2,-2),  (3,-2), (4,-2)
(-4,-3) (-3,-3),   (-2,-3), (-1,-3),  (0,-3),  (1,-3),   (2,-3), (3,-3), (4,-3)

So, The points with integer coordinates in this rectangular region will be above 50.

To learn more about coordinates, visit;

brainly.com/question/17154394

#SPJ4

The points with integer coordinates in this rectangular region will be above 50.

You must use graph paper and draw the rectangle. You must draw the picture in order to solve the problem. It is not easy to visualize the rectangle, the coordinates and count the points inside it all at the same time without a picture to help you. You must draw it.

Once you draw it, the vertices are (5,4), (5,-4), (-5,-4) and (-5,4) in the clockwise directions starting from the upper left corner.Since we are interested in points that are strictly inside the rectangle -4 < y < 4 and -5 < x < 5;

That is y = -3,-2,-1,0,1,2,3 and x = -4,-3,-2,-1,0,1,2,3,4

The points with integer coordinates that are strictly inside the rectangle are then:

(-4,3)   (-3,3),   (-2,3),   (-1,3),   (0,3),   (1,3),   (2,3),   (3,3),  (4,3)

(-4,2)   (-3,2),   (-2,2),   (-1,2),   (0,2),   (1,2),   (2,2),   (3,2),  (4,2)

(-4,1)   (-3,1),   (-2,1),    (-1,1),  (0,1),   (1,1),    (2,1),  (3,1),  (4,1)

(-4,0)   (-3,0),   (-2,0),    (-1,0)   (0,0),   (1,0),    (2,0),   (3,0),  (4,0)

(-4,-1)  (-3,-1),  (-2,-1),  (-1,-1), (0,-1),  (1,-1),  (2,-1),  (3,-1), (4,-1)

(-4,-2) (-3,-2),   (-2,-2), (-1,-2),  (0,-2),  (1,-2),  (2,-2),  (3,-2), (4,-2)

(-4,-3) (-3,-3),   (-2,-3), (-1,-3),  (0,-3),  (1,-3),   (2,-3), (3,-3), (4,-3)

So, The points with integer coordinates in this rectangular region will be above 50.

To learn more about coordinates visit;

brainly.com/question/15397697

#SPJ4

The correct statement is C. The angular acceleration of each of the wheels is 4 (rad/s)^2.

The car has a uniform acceleration from 10 m/s to 20 m/s, so the average speed is (10 m/s + 20 m/s) / 2 = 15 m/s. The time it takes to travel the 150-metre-long track at this average speed can be found using the equation:

distance = speed x time

time = distance / speed = 150 m / 15 m/s = 10 s

The linear acceleration of a point on each wheel can be found using the equation:

a = (vf - vi) / t = (20 m/s - 10 m/s) / 10 s = 1 m/s^2

The angular acceleration of each wheel can be found using the equation:

alpha = a / r = 1 m/s^2 / 0.25 m = 4 rad/s^2

The initial angular velocity of each wheel is not given in the problem, so statement D is not necessarily true.

The value of side length PS is found as 4 units for the given right angled triangles.

For the stated question:

PQ = 3x - 3

QR = 6x - 9

PS = 5x - 6

As, Q is the mid point of PR.

PQ = QR

3x - 3 =  6x - 9

On solving.

x = 2

Then,

PS = 5*2 - 6

PS = 4

Thus, the value of side length PS is found as 4 units for the given right angled triangles.

To know more about the congruent triangles, here

https://brainly.com/question/29789999

#SPJ1

The correct question is attached.

The statements that are true about quadrilaterals are:

Parallelograms lack right angles, not all of them can be rectangles. There must be right angles for a parallelogram to be considered a rectangle.

Not every parallelogram has a rectangular component. A rhombus is not a square since its angles are not 90 degrees, yet a square is a rhombus. In a parallelogram, the opposing angles are equal (or congruent) The complementary angles to each other are consecutive angles (that means they add up to 180 degrees).A parallelogram's diagonals cut each other in half.

Therefore, option A,C and F are correct.

Learn more about quadrilaterals at:

https://brainly.com/question/10388790

#SPJ1

The inventory at the beginning of the day, given that 18 were sold earlier that day, is 70 units

The inventory at the beginning of the day can be found by the formula:

= Closing store inventory for the day + Inventory sold during the day

Closing store inventory for the day = 52 units

Inventory sold earlier that day = 18 units

The inventory at the beginning is therefore:

= 52 + 18

= 70 units

In conclusion, the inventory at the beginning of the day was 70 units.

Find out more on beginning inventory at https://brainly.com/question/28894250

#SPJ1

Answer:

Step-by-step explanation:

0.66 litres will be used if she wants to use equal amounts of the solution in 3 experiments.

In mathematics, division is the process of breaking a number into equal parts and determining how many equal parts can be made. For example, dividing 15 by 3 divides 15 into three equal groups of five.

The symbol '÷' or '/' is used to represent division.

Any positive number with no decimal or fractional part is referred to as a whole number. Because these criteria are met, the numbers 1,2,15,500, and 1546 are all whole numbers.

Children will practise dividing whole numbers as they begin to learn their multiplication tables. This is due to the fact that all of the numbers in the times tables are whole numbers!

They will also learn that division is the inverse operation to multiplication, which simply means that division and multiplication perform opposite functions in mathematics.

We have 2 litres of saline water

and want to divide them in 3 experiment equally, i.e.

2 ÷ 3 = 0.6667

Learn more about division

https://brainly.com/question/21416852

#SPJ1

The two solutions of the system of equations are (4, -1) and (-1, 4).

Here we want to solve the system of equations below:

x + y = 3

x^2 + y^2 = 17

We can isolate x on the first equation to get:

x = 3 - y

And replace that in the other equation to get:

(3 - y)^2 + y^2 = 17

9 - 6y  + y^2 + y^2 = 17

2y^2 - 6y + 9 - 17 = 0

2y^2 - 6y - 8 = 0

y^2 - 3y -4 = 0

Using the quadratic formula we will get the solutions:

[tex]y = \frac{3 \pm \sqrt{(-3)^2 - 4*1*(-4)} }{2} \\\\y = \frac{3 \pm5 }{2}[/tex]

So the two solutions are:

y = (3 + 5)/2 = 4

y = (3 - 5)/2 = -1

The correspondent values of x are given by evaluating the line.

x + 4 = 3

x = 3 - 4 = -1

So we have the point (-1, 4)

x - 1 = 3

x = 3 + 1

x = 4

So we have the point (4, -1)

Learn more about systems of equations at:

https://brainly.com/question/13729904

#SPJ1

Answer:

(-4)^12

Step-by-step explanation:

Hello!

We can use exponent rules to rewrite the equation.

a^b * a^c = a^(b+c)

The value of the equation can be calculated by (-4)^12.

[tex](-4)^{12}[/tex]Answer:

Step-by-step explanation:

using the rule of exponents

[tex]a^{m}[/tex] × [tex]a^{n}[/tex] = [tex]a^{(m+n)}[/tex] , then

[tex](-4)^{5}[/tex] × [tex](-4)^{7}[/tex]

= [tex](-4)^{(5+7)}[/tex]

= [tex](-4)^{12}[/tex]

The system of equation: 3(2x-5)=28 represent the dimensions of the play area.

As per the data given,

We have, the width of a rectangle play area is 5 meters less than the length.

Let us assume that the length of the rectangular field = x

So, the value of the width of the rectangular field will be = (x-5)

As we know,

The Perimeter of the rectangular field can be determined by using formula:

Perimeter = 2l+2b, where, l = length of the rectangle, while b = breadth of the rectangle.

From question,

We have a value of the rectangle as 38 m

So, writing the above in form of the equation,

We can write the above as:

2(length + breadth) = 38

=> 3(x+ (x-5) =38

=> 3(x+x-5) =28

=>3(2x+5)=28

For more questions on Perimeter of Rectangle

https://brainly.com/question/19819849

#SPJ4

[tex]0.5x > 4.5[/tex]

Divide both sides by 0.5:

[tex]\dfrac{0.5x}{0.5} > \dfrac{4.5}{0.5}[/tex]

Answer:

[tex]x > 9[/tex]

the domain, range, and x-intercept of the function g(x) = − 4x + 8 are Domain: −∞ < x < ∞; Range: −∞ < y < ∞; x-intercept (2, 0) that is the first option.

A relationship between a group of inputs and one output is referred to as a function. In plain English, a function is an association between inputs in which each input is connected to precisely one output. A domain, codomain, or range exists for every function. Typically, f(x), where x is the input, is used to represent a function.

Given a function  g(x) = − 4x + 8

The domain of a function means all possible inputs or all the numbers that can be put in place of x to get some output

The range of a function means all possible outputs or all the numbers that are the result of all the inputs or values of y

Intercept is the point on a graph whose one coordinate is zero. There are two types of intercepts - X intercept where the y coordinate is zero and Y-intercept where the value of the x coordinate is zero

The domain of the given function is all real numbers or - infinite < x< infinite

The range of the given function is all real numbers or - infinite < x< infinite

The x-intercept of the given function is where y = 0

so,  0 = -4x + 8

-8 = -4x

x = 2

The x-intercept is (2,0)

Therefore, the domain, range, and x-intercept of the function g(x) = − 4x + 8 are Domain: −∞ < x < ∞; Range: −∞ < y < ∞; x-intercept (2, 0) that is the first option.

Learn more about function here:

https://brainly.com/question/29633660

#SPJ1