Answer:
d) Non-polar solvents
9.23 x 10^23 Au atoms= moles Au
Answer:
1.533 moles Au
Explanation:
To find the moles from atoms, you just use Avogadro's number (6.02214076×10^23 mol^-1) and divide by it. Hope this helped!
Answer:
[tex]\boxed {\boxed {\sf 1.53 \ mol \ Au}}[/tex]
Explanation:
We are asked to find how many moles of gold are in 9.23 *10²³ atoms of gold.
Avogadro's Number or 6.022 *10²³ is used to convert atoms to moles. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this case, the particles are atoms of gold.
We convert using dimensional analysis. Set up a conversion factor using Avogadro's Number.
[tex]\frac {6.022 \times 10^{23} \ atoms \ Au}{ 1 \ mol \ Au}[/tex]
We are converting 9.23 * 10²³ atoms of gold to moles, so we multiply by this value.
[tex]9.23 \times 10^{23} \ atoms \ Au *\frac {6.022 \times 10^{23} \ atoms \ Au}{ 1 \ mol \ Au}[/tex]
Flip the conversion factor so the units of atoms of gold cancel.
[tex]9.23 \times 10^{23} \ atoms \ Au *\frac { 1 \ mol \ Au}{6.022 \times 10^{23} \ atoms \ Au}[/tex]
[tex]9.23 \times 10^{23} *\frac { 1 \ mol \ Au}{6.022 \times 10^{23}}[/tex]
[tex]\frac {9.23 \times 10^{23} }{6.022 \times 10^{23} } \ mol \ Au[/tex]
[tex]1.53271338426 \ mol \ Au[/tex]
The original measurement of atoms has 3 significant figures, so our answer must have the same. For the number we found, that is the hundredth place. The 2 in the thousandth place tells us to leave the 3.
[tex]1.53 \ mol \ Au[/tex]
9.23 *10²³ atoms of gold is equal to approximately 1.53 moles of gold.
When Zinc-67 is bombarded with a neutron, a gamma ray is emitted. What radioactive isotope is produced?
Answer:16/29
Explanation:
1. Here is a chemical equation: C2H2 + O2 → CO2 + H2O
• A Balance this chemical equation.
• B State what type of chemical reaction this is.
• C What will happen during this reaction besides just CO2 and H2O being released.
• D Discuss how your balanced chemical equation agrees with the law of conservation of mass.
2. Balance each of the reactions listed below. What type of reactions are they? Single-displacement, double-displacement, synthesis, decomposition, or combustion reaction.
• A Na + Cl2 → NaCl
• B Fe + O2 → FeO
Answer:
1) a) 2 C2H2 + 3O2 --> 2CO2 + 2H2O
b) Combustion Reaction
c) Bonds will be broken on the reactant side which will require energy.
d) It agrees with the law of conservation of mass because there are the same amount of molecules of each element on both sides of the equation, meaning mass was not created nor destroyed.
2) a) 2Na + Cl2 --> 2NaCl
Synthesis
b) 2Fe + O2 --> 2FeO
Synthesis
Hope this helps!
Explanation:
To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the balanced equation is
2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O
What is Balanced equation?Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
a) 2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O is the balanced equation
b)Reaction is a Combustion Reaction
c) energy is required for the breaking of bond.
d) It agrees with the law of conservation of mass as the number of atoms of each element on reactant and product side is same.
Therefore, the balanced equation is
2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O
Learn more about the balanced equation, here:
https://brainly.com/question/7181548
#SPJ2
In one to two sentences, describe an experiment that would show that intramolecular forces (attractions between atoms within molecules) are stronger than intermolecular forces (attractions between molecules).(2 points)
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
Intramolecular forces are the forces of attraction that hold atoms together within a molecule. Intramolecular forces require a high amount of energy to splits atoms or molecules in a chemical bonding.
Intermolecular forces are weaker forces of attraction that occur between molecules. They require lesser energy to splits molecules compared to intramolecular forces.
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
In the process, the energy required to change the state from ice to steam water is more than intermolecular forces.
Thus, we can conclude that this experiment shows that the intramolecular forces are stronger than the intermolecular forces.
Learn more about Intramolecular forces here:
https://brainly.com/question/13588164
Calculate the oxidation number for carbon in CH4
Answer:
+4
Explanation:
Oxidation number of neutral compound is 0
Oxidation number of hydrogen in methane is -1
C + (-1×4) = 0
C - 4 = 0
C = 4
Explain why aluminum does not react with potassium nitrate (KNO3) although it reacts with copper nitrate
Answer:
Potassium is more reactive than aluminium, so no reaction takes place. But aluminium is more reactive than copper, so it replaces the copper in copper nitrate
Explanation:More reactive metal compound + less reactive metal
-> no reaction
However
Less reactive metal compound + more reactive metal
-> more reactive metal compound + less reactive metal
This is called substitution reaction where the more reactive metal replaces the less reactive metal in the compound.
Which element is shown below? How do you know?
what will happen to a person who doesn't recognize authors and even citing proper sources?
it will be called verbatim plagiarism, also called direct plagiarism
Heart, 5 stars, and Brainiest to first right answer!
Which two types of air masses would likely form a subtropical jet stream?
Warm and cool air masses meeting near the North Pole
Cool and warm air masses meeting near the equator
Multiple warm air masses meeting near the equator
Two or more cool air masses meeting near the South Pole
Answer:
Give person above me brainliest
Explanation:
true or false in a chemical reaction some of the atoms will be changed into different type of atoms
Answer:
It's false
Explanation:
Tyra designed an experiment to demonstrate an annular solar eclipse. The steps of the
experiment are listed below.
.
e
.
Place a light bulb on a stand.
Stick a pencil into a small styrofoam ball.
Switch on the light bulb and darken the room.
Stand facing the light bulb.
Hold the pencil with styrofoam ball very close to the eye.
Observe the light bulb without moving the eye and styrofoam ball.
Tyra's experiment has a flaw. Which of these statements best describes a method to
correct the flaw in Tyra's experiment? (3 points)
.
.
Place the light bulb behind the observer.
O Clamp the styrofoam ball behind the light bulb.
O Move eye towards the right to observe the light bulb.
Hold the styrofoam ball at arm's length from the eye.
Answer:
The answer is D.
Explanation:
Hold the styrofoam ball at arm's length from the eye.
true or false a change in state of matter would be considered a physical change
Answer:
true
Explanation:
Because the changes in state of matter would be considered
How to find total mass of water in final solution
Answer:
Explanation:
Just like a solid, the density of a liquid equals the mass of the liquid divided by its volume; D = m/v. The density of water is 1 gram per cubic centimeter.
How is the atomic mass of an element related to a mole?
O A. The atomic mass, in grams, is the mass of 6.02 x 1023 moles.
O B. The atomic mass, in grams, is the mass of 6.02 x 1023 electrons.
O C. The atomic mass, in grams, is the mass of one mole of atoms.
O D. The atomic mass, in grams, is the mass of one mole of protons.
Answer:
i the answer to your question should be C
Explanation:
Hope this helps!
The atomic mass of an element related to a mole in grams, is the mass of one mole of atoms. Therefore, option C is correct.
What is an atomic mass ?An atom's mass is its atomic mass. Although the kilogramme is the SI measure of mass, the unified atomic mass unit, or dalton, is a common way to express atomic mass. An unbound carbon-12 atom in its ground state has a mass of 112 of a Da.
A mass that is one-twelfth the mass of an atom of carbon-12 is known as an atomic mass unit. Any isotope of any element's mass is represented in terms of the carbon-12 reference standard.
The size of an atom is indicated by its atomic mass. Technically speaking, an atom's mass is the total weight of its protons, neutrons, and electrons.
Thus, option C is correct.
To learn more about an atomic mass, follow the link;
https://brainly.com/question/17067547
#SPJ2
What is chlorine iodine ?
Answer:
Chlorine Iodine is a compound made out of one Chlorine molecule and one Iodine molecule
Explanation:
Find the volume of 8 gram of oxygen gas
How do plants use the energy from the sunlight?
Answer:
Hey mate....
Explanation:
This is ur answer....
Plants use a process called photosynthesis to make food. During photosynthesis, plants trap light energy with their leaves. Plants use the energy of the sun to change water and carbon dioxide into a sugar called glucose. Starch is stored in seeds and other plant parts as a food source.
Hope it helps!
Brainliest pls!
Follow me! :)
Answer:
Plants use photosynthesis to convert sun light into their own food to consume. Green plants use this light energy to change water and carbon dioxide into oxygen and nutrients called sugars. The plants use some of the sugars and store the rest. The oxygen is released into the air.
One student made the incomplete diagram shown below to represent the relationship between Magma, Igneous Rocks, and Metamorphic Rocks.
Which of these is the correct next step to complete the diagram?
A. Put an arrow labeled deposition and lithification, pointing from Igneous Rocks to Magma.
B. Put an arrow labeled heat and pressure, pointing from Magma to Igneous Rocks.
C. Put an arrow labeled heat and melt, pointing from Metamorphic Rocks to Magma.
D. Put an arrow labeled cools and crystallizes, pointing from Igneous Rocks to Metamorphic Rocks.
Answer:
the answer is B
Explanation:
this shows the next step and shows how magma turns into igneous rocks by heat and pressure
When vectors are added or subtracted, the net force is called the _____.
will give brainliest to whoever gets it right
Answer:
resultant
Explanation:
It takes about 38 m3 of boards and plywood to build an average-size, single-family home. Can an average-size, single-family home be built with one day’s output from the saw mill? About how many days will it take for the saw mill to produce enough lumber to build a neighborhood of 100 average-size homes?
A) The answer to whether an average-size, single-family home be built with one day’s output from the saw mill is; No, it can't be built from one days output
B) The number of days will it take for the saw mill to produce enough lumber to build a neighborhood of 100 average-size homes is; 1100 days
A) From research, the average size capacity saw mill usually produces around 1500 board feet of boards per day.
Now, converting board ft to cubic meter gives;
1 board feet = 1/424 m³
Thus; 1500 board feet = 1500 * 1/424 ≈ 3.54 m³
Now, we are told that it takes 38 m³ of boards and plywood to build an average size single family home.
Since one days output = 3.54 m³
It is less than the volume required for the average sized house and so the daily output will not be sufficient.
B) Number of days to produce enough boards and plywood for the average sized family home = 38/3.54 ≈ 11 days
Thus, for 100 homes;
Number of days = 100 * 11 = 1100 days
Read more about production capacity at; https://brainly.com/question/25899399
A chemical engineer must be able to predict the changes in chemical concentration in a reaction. dC/dt = -kCn where C is chemical concentration and k is rate constant. Order of reaction is the value of n. The first order reaction that combines tert-butyl bromide and water to produce tert-butyl alcohol and hydrogen bromide is shown below; (CH3)3CBr + H2O (CH3)3COH +HBr From the experimental data, k was estimated to be k = 0.0537 (h -1 ). Determine concentration after 1 hour, if C(0) = 0.2 mol/L
Answer:
Explanation:
Consider the general chemical reaction
[tex]\mathrm{A} \ \overset{k}{\longrightarrow} \ \mathrm{product}[/tex] .
If [A] is the concentration of A (reactant) at any time t and n is the reaction order for the whole equation, the rate is then related to the concentration of reactant A with the following differential form of equation
[tex]Rate \ = \ -\displaystyle\frac{d[\mathrm{A}]}{dt} \ = \ k[\mathrm{A}]^{n}[/tex] .
where k is the rate constant.
*Note that the differential term [tex]\displaystyle\frac{d[\mathrm{A}]}{dt}[/tex] has a negative sign to denote that the concentration of A is decreasing over time t.
Since the chemical reaction between tert-butyl bromide and water is given to be a first-order reaction, hence n = 1, and the resulting differential equation becomes
[tex]Rate \ = \ -\displaystyle\frac{d[\mathrm{A}]}{dt} \ = \ k[\mathrm{A}]^{1} \ = \ k[\mathrm{A}][/tex]
To solve this first-order linear homogenous differential equation, the method of separation of variables can be used.
[tex]\-\hspace{1cm} \displaystyle\frac{d[\mathrm{A}]}{dt} \ = -\ k[\mathrm{A}] \\ \\ \-\hspace{0.5cm} \displaystyle\frac{1}{[\mathrm{A}]} \, d[\mathrm{A}] \ = -\ k \, dt \\ \\ \int\ {\displaystyle\frac{1}{[\mathrm{A}]} \, d[\mathrm{A}] \ = \ -\int {k} \, {dt}[/tex]
[tex]\ln{[\mathrm{A}]} \ = \ -kt \ + \ C \\ \\ \-\hspace{0.45cm} $[A]$ \ = \ e^{-kt \ + \ C} \\ \\ \-\hspace{0.45cm} $[A]$ \ = \ e^{-kt}e^{C} \ \ \ \ \ \ \ \ \ (e^{a \ + \ b} \ = \ e^{a}e^{b} \ \ \ \mathrm{by \ the \ law \ of \ indices})[/tex]
Since the term [tex]e^{C}[/tex] is a constant, let [tex]\alpha \ = \ e^{C}[/tex], hence [tex][\mathrm{A}] \ = \ \alpha e^{-kt}[/tex] or [tex]C \ = \ \alpha e^{-kt}[/tex] according to the question. Given that the initial concentration (t = 0) of tert-butyl bromide is 0.2 mol/L and k = 0.0537[tex]\mathrm{h^{-1}}[/tex], so
[tex]0.2 \ = \ \alpha e^{-0.0537 \ \times \ 0} \\ \\ 0.2 \ = \ \alpha \ \ \ \ \ (e^{0} \ = \ 1)[/tex]
Therefore, the rate equation is [tex]C \ = \ 0.2e^{-0.0537t}[/tex].
The concentration of tert-butyl alcohol after 1 hour is
[tex]C \ = \ 0.2e^{-0.0537 \ \times \ 1} \\ \\ C \ = \ 0.2e^{-0.0537} \\ \\ C \ = \ 0.190 \ \mathrm{mol/L} \ \ \ (3 \ \ \mathrm{s.f.})[/tex]
true or false in a chemical reaction the same number of each type of atom will always be present before and after the reaction takes place
Answer:
True
Explanation:
True because of the law of conservation of mass, the same same amount of atoms will be on both sides of the reaction.
WILL GIVE BRAINLIEST (also pls don't copy answers from other ppl :D) Question: Choose two spheres of Earth which interact when hot springs are formed. Use complete sentences to explain how they interact during this process.
Answer:
Geosphere and Hydrosphere.
Explanation:
Hot springs are heated by geothermal heat—heat from the Earth's interior. In volcanic areas, water may come into contact with very hot rock heated by magma. The geosphere and hydrosphere interact when hot springs form. The geosphere gets a little melted by the hot hydrosphere and then when the springs shoot up in the air they break some rocks.
How could you distinguish a compound from a mixture
Answer:
Compound are substances which can be formed by chemically combining two or more elements. Mixtures are substances that are formed by physically mixing two or more substances.According to Hebrews 11, what did Abraham believe God would do if Isaac was slain as a sacrifice? Please help me I need it for tonight!
Answer:
ABRAHAM DIDN’T THINK ISAAC WOULD DIE!
When they reached the mountain, Abraham told his servant, “Stay here with the donkey; I and the boy will go over there and worship and come again to you” . The text is careful to include both Abraham and Isaac in the return journey.
Or consider Isaac’s question about where the lamb for the sacrifice would come from. Abraham responds, “God himself will provide the lamb”. It seems Abraham prepared himself to do what God asked, but he expected something else to happen.
The author of the book of Hebrews gives us insight to Abraham’s thoughts. It says, “He considered that God was able even to raise [Isaac] from the dead” Instead of a resurrection, Abraham was spared the sacrifice.
According to Hebrews 11, what did Abraham believe God would do if Isaac was slain as a sacrifice? Please help me I need it for tonight!
Answer:
Abraham thought that GOD would raise Issac back from the dead. It was a test and they would sacrifice the donkey instead.
Producers are the most numerous group in an ecosystem. Why?
-------------------------------------------------------------------------------------------------
Producers produce food energy for themselves and all the other levels. ⬜
Soil and temperature conditions in an ecosystem always favor producers. ⬜
As energy flows through the ecosystem, some energy is added at each step. ⬜
There is more room for small organisms than there is for large ones. ⬜
Answer:
The primary producer uses some of that energy. Because we lose energy each time we move up a trophic level, we have more producers than consumers, more herbivores than carnivores, more primary consumers than secondary consumers. See this Socratic answer for more detail.
Explanation:
Answer:
Producers produce food energy for themselves and all the other levels
Explanation:
what is metal's I need answer
Answer:
objects thaty release 0H+ and H- ions when dissociated
Explanation:
in chemistry
please mark brainliest
what is the element found in all living matter.
Answer:
There are four elements that are found in all living animals, that are:
Oxygen (O)
Carbon (C)
Hydrogen (H)
Nitrogen (N).
the property of matter that determines whether or not an electrical current can pass through it