The slope of the line plot of mass and volume of the object will be greater than of water.
What is the density of a substance?The density of a substance is the ratio of the mass of the the substance and its volume.
Density = mass/volumeDensity measures the compactness or the amount of space present in a given substance of known mass and volume. The higher the density of a substance the more compact the substance is.
The density of water is close to 1.00g/ml.
The slope of a line plot of mass and volume will give the density of the substance.
The slope of a line plot of mass and volume of volume of water will give a value close to one.
A substance which is denser than water will have a density greater than 1 g/mL
Therefore, the slope of the resulting line plot of mass and volume of the object will be greater than of water.
Learn more about density at: https://brainly.com/question/1354972
#SPJ1
find heat capacity when 47.0 J of heat is added to 13.0 g of a liquid, its temperature rises by 1.71 ∘C
Heat capacity when 47.0 J of heat is added to 13.0 g of a liquid, its temperature rises by 1.71 ∘C is 22.23 J/ ∘C g .
from the above statement we have got
Q = 47.0 J
MASS = 13.0 g
temperature (T) = 1.71 ∘C
heat capacity ( c ) = ?
NOW, from the formulae , Q = mcΔt
put all the values given in equation
47.0 J = 13.0 g [tex]\times[/tex] c [tex]\times[/tex]1.71 ∘C
c = 47.0 ÷ 13.0[tex]\times[/tex]1.71
c = 47/22
c = 22.23 J/ ∘C g
heat capacity It is the amount of heat energy required to elevate the temperature of an object by 1 degree celsius.To know more about heat capacity visit :
https://brainly.com/question/28302909
#SPJ9
Antifreeze has a density of 0.79 g/mL. What mass of antifreeze, in grams, is required to fill a 2.5
gallon car radiator?
Note: 1 gallon = 3.785
The mass of antifreeze required to fill a 2.5 gallon car radiator is
Since, 1 gallon = 3.785 L
2.5 gallon = 9.4625 L
Given,
Gasoline = 9.4625 L x 1000 mL/L
= 9462.5 mL
Density = 0.79 g/mL
Mass = Density x volume (density = mass )
Mass = 0.79 g/mL x 9462.5 mL volume
Mass = 7475.37 g
Therefore,
Mass of antifreeze, in grams = 7475.37 g
To learn more about antifreeze,
brainly.com/question/2770534
#SPJ1
convert 64.3 kilograms to milligrams
Answer:
64.3 kilograms = 64300000 milligrams
Hope this helps :)
This problem has to be solved using algor mortis.
3. Approximately how long as the victim been dead if his body temperature was 85.2 F?
Answer:
The victim has been dead for approximately 12 hours.
Explanation:
Algor mortis, or the cooling of the body after death, is a reliable way to estimate time of death. The average body temperature is 98.6 degrees Fahrenheit, so 85.2 degrees Fahrenheit would be 12 hours after death.
Matter can change state when ______ energy is ______ into or out of the ______.
Fill in the blanks.
Thank you
Matter can change state when thermal energy is absorbed into or out of the body.
What energy is used to change the state of matter?Changing states of matter occur when matter loses or absorbs thermal energy. When a substance absorbs energy, the atoms and molecules move more fast which increases kinetic energy of the atoms that pushes particles far enough from each other which resulted in the change of form. This energy which changes the state of matter is the heat or thermal energy. We know that thermal energy increases kinetic energy so that's why the heat energy changes state of matter.
So we can conclude that Matter can change state when thermal energy is absorbed into or out of the body.
Learn more about energy here: https://brainly.com/question/13881533
#SPJ1
How many moles of each type of atom are in 1.0 mol of K2Cr2O7?
1.0 mol of K₂ Cr₂07 contains 2 mol K, 2 mol per 7 mol 0.
One mole of atoms of any element carries 6.022 X 1023 atoms, regardless of the kind of detail. Use the periodic table to determine the molar mass of the element. Divide the given mass in grams by the molar mass to locate the range of moles. Multiply the number of moles via Avogadro's wide variety to attain the variety of atoms. There are 24 atoms in a single molecule of C6 H12 06. This chemical compound has 6 atoms of carbon, 12 atoms of hydrogen, and six atoms of oxygen. this is a total of 24 atoms.
The mole is the quantity of substance of a system that includes as many fundamental entities as there are atoms in zero. 012 kilogram of carbon 12 its symbol is mol To discover the number of moles in a sample, simply weigh it and divide the weight by way of the molecular weight. The quotient is equal to the variety of moles. The number of atoms or different particles in a mole is the same for all substances divided by the mass of the substance in grams via its molecular weight. this could provide you with the range of moles of that substance that are inside the targeted mass.
Learn more about An atom here:-https://brainly.com/question/17545314
#SPJ9
Q1.
An athlete decides to try a new type of protein drink after he exercises.
(a)
The athlete tests the protein drink to check it contains protein.
Which solution is used to test for protein in the drink?
Tick one box.
Benedict's
Biuret
lodine
Universal indicator
To check the protein in the drink the test carried out is Biuret Test
What is Biuret Test?
The chemical test known as the "Biuret test" uses the Biuret reagents to produce the compound known as "Biuret," which is created by heating urea to 180 °C. A 1% solution of Copper II sulphate is used in the test
([tex]CuSO_{4}[/tex]). The peptide bonds found in proteins create a compound with the [tex]Cu^{2+}[/tex] in the Biuret reagent. This test therefore aids in identifying peptide bonds in any substance.
The reagent in the biuret test does not really include biuret; however, the test's name derives from the fact that the peptide-like linkages in the biuret molecule produced a favorable reaction.
Two of the many more sophisticated variations of the biuret test are the Lowry test and the BCA test.
To learn more about Biuret Test
brainly.com/question/1412997
#SPJ9
What's a fear, concern, or worry you have? How can you best prepare to tackle this obstacle? (Write 2 to 3 complete sentences) ¿Qué miedo, preocupación o preocupación tienes? ¿Cómo puedes prepararte mejor para enfrentar este obstáculo? (Escribe de 2 a 3 oraciones completas)
Ayuda plis.
Answer:
I'm worried about going to college and living in a dorm. I'm currently keeping in touch with my roommates to know what kind of people they are. Also, I'm starting to pack and get ready to move to my dorm.
Explanation:
In a density measurement, you determine the mass of an object to be 10.50 +/- 0.02 g and the volume of the object to be 1.638 +/- 0.005 mL. You divide the mass by the volume to determine the density of the object in g/ml. What is the final propagated error on the density?
Select one:
a.
+/- 0.0004 g/mL
b.
+/- 0.04 g/mL
c.
+/- 0.0002 g/mL
d.
+/- 0.02 g/mL
The final propagated error on the density is +/-0.02g/mL
The density is the amount of a specific material per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per centimeter are a common measurement unit used for density.
The relationship between mass and volume can be easily determined using density; for instance, the mass of a body is equal to its volume multiplied by the density (M = Vd), whereas the volume is equal to the mass divided by the density (V = M/d). By multiplying a body's mass by the acceleration of gravity, one can get the weight of the object, which is usually more important practically than its mass.
To learn more about density please visit-
https://brainly.com/question/6838128
#SPJ9
To separate a mixture of hard candies and
marbles, the most efficient method would be
DONE
To separate a mixture of hard candies and marbles, the most efficient method would be filtration .
A mixture is just the physical mixing of a mixture's constituent parts, including suspensions and colloids, that maintain their identities and are thus combined in the necessary proportions.
One or more sweetener syrups are heated to 160°C to create a sugar confection known as a hard candies , often referred to as a boiled sweet.
To avoid damaging the water pipes, boil the candies if marbles are present unless they dissolve in water. Then, place a filter in the sink and run cold water for two minutes when pouring the water into the strainer and after emptying it.
To know more about mixture and hard candies
brainly.com/question/24898889
#SPJ1
Gelatinous precipitate such as Aluminium hydroxide are best filtered using O a. ashless filter paper b. ash filter paper O c. oxalate d. sintered glass crucible.
Ashless filter paper is the correct option.
The process of turning unusable water into drinkable (potable) water is known as water purification. Since water creates an excellent solvent, getting pure water without treatment is challenging.Coarse filtering is used in the initial stage to get rid of big foreign objects. By letting the water pass through a mesh screen, this is accomplished. Sedimentation is the subsequent phase. To allow for the separation of tiny particles, the water is left to stand. Aluminum sulfate and calcium oxide in the water help in this process. Aluminum hydroxide reacts with some of the water to generate a gelatinous substance. The slow-moving gelatinous precipitation drags down particles as it settles.Following aeration, the water is filtered through a fine sand bed to oxidize dissolved organic molecules. Sterilization of the water is the last step. This is frequently done by bubbling chlorine gas through the water, which creates a mild acid that kills any germs that are still present. In this procedure, ozone can also be employed in place of chlorine.Therefore, option a. is correct.
Learn more about filter paper:
https://brainly.com/question/6254141
#SPJ9
A __________ is a piece of land that is formed when a river splits into smaller rivers before flowing into an ocean.
butte
delta
glacier
hill
Answer: A) Delta
Explanation:
A river delta is a landform shaped like a triangle, created by deposition of sediment that is carried by a river and enters slower-moving or stagnant water. This occurs where a river enters an ocean, sea, estuary, lake, reservoir, or another river that cannot carry away the supplied sediment.
Hope this helped!
Moisture is in the air, as compressed air cools it condenses, why must moisture be removed from air feeding pneumatic controls?
The moisture must be removed from air feeding pneumatic controls because moisture corrodes the walls of an air cylinder, dilutes the oil needed for the head and rod, and reduces reaction time.
What is the mechanism of a pneumatic controller?
A pneumatic controller is a mechanical apparatus created to gauge temperature or pressure and send a corrective air signal to the last control element. The heat or pressure sensing system and the air signal relay system work together to power a pneumatic controller.
Moisture corrodes the walls, dilutes the oil needed for an air cylinder's head and rod, and slows reaction time. Efficiency and output are lost as a result. Rubber valve diaphragms may harden and rupture if moisture is allowed to get to them. Spools and pistons can develop pits as a result of moisture.
To learn more about Moisture click on the link below:
https://brainly.com/question/25534416
#SPJ1
List three possible reasons why Zara cannot see any cells.
Zara is examining some animal cells on a slide using a microscope. She is aware that there are animal cells on the slide, but she is unable to see any cells when using the microscope. Give three reasons why Zara might not be able to notice any cells.
Understanding organelles has been greatly aided by microscopes. Most organelles cannot be seen using a light microscope, and those that can (such as the nucleus, mitochondria, and Golgi) cannot be studied in detail because of their size, which is near to the light microscope's resolution limit.
The other cell organelles are too tiny and do not adhere to the dye to be visible under a lab microscope.
Learn more about microscope here:
https://brainly.com/question/18661784
#SPJ9
4. In what region of the periodic table are you likely to find elements that form more than one stable
ion?
Answer:
in the middle region of the periodic table, where the transition metals are
aka between Group II and III
I
Based on the information below, which of the following are atoms of the same element? (mark all that apply)
Atom A
Atom B
Atom C
8 protons
8 neutrons
8 electrons
10 protons
10 neutrons
10 electrons
8 protons
10 neutrons
8 electrons
end
Based on the information below . The atoms of the same element are Atom A and Atom C .
Atoms of same element have the same atomic number. so the number of protons and electron are same but they have different atomic masses called as Isotopes. so, the atoms having different number of neutron will have different masses.
In the given case ,
Atom A Atom B Atom C
8 protons 10 protons 8 protons
8 neutrons 10 neutrons 10 neutrons
8 electrons 10 electrons 8 electrons
so, In Atom A and Atom C , the number of protons and electrons are same but the have different atomic masses means having different no. of neutrons. so Atom A and Atom C are the atoms of same elements.
Hence,Based on the information below . The atoms of the same element are Atom A and Atom C.
To learn more about Atoms and Elements here
https://brainly.com/question/15173445
#SPJ1
Pls help which of the following statements is true
A. None are correct.
Explanation:
Proton has positive charge and mass too.
A neutron is chargeless and has mass as well.
An electron has negative charge and has mass.
The atomic number of carbon is 6.
Hence none are correct.
Determine the volume of hydrogen gas needed to react completely with
5.00 L of oxygen gas to form water,
The volume of hydrogen needed to react with 5.00 L of oxygen based on the mole ratio is 10.00 L.
What volume of hydrogen gas is needed to react with 5.00 L of oxygen?The volume of hydrogen gas is needed to react with 5.00 L of oxygen is determined from the mole ratio of the reactants as shown in the equation of reaction below:
Equation of reaction: 2 H₂ + O₂ → 2 H₂O
Mole ratio of hydrogen to oxygen = 2 : 1
Moles of gases occupies equal volume
Therefore, Volume ratio of hydrogen to Oxygen = 2 : 1
Volume of hydrogen needed to react with 5.00 L of oxygen = 5.00 * 2
Volume of hydrogen needed to react with 5.00 L of oxygen = 10.00 L
In conclusion, the volume of hydrogen required is obtained from the mole ratio of hydrogen and oxygen in the reaction.
Learn more mole volume of gas at: https://brainly.com/question/23826637
#SPJ1
2NH3 + H₂SO4 → (NH4)2SO4
Calculate the percentage atom economy to form the fertiliser ammonium sulphate in the above reaction
The percentage atom economy is 62%
2NH3 + H₂SO4 → (NH4)2SO4
34 gram 98 gram 210 gram
2 mol 1 mol 1 mol
% atom economy = mass of atoms in desired product/total mass of atom in Product x 100
% atom economy = 132/210 x 100 = 0.62 = 62%
What is Atom economy ?The amount of desirable useful products produced from reactants is measured by atom economy, also known as atom efficiency. It is frequently expressed as a percentage and is referred to as percentage atom economy. The required product atoms are divided by the total number of reactants, which is equal to the total number of product atoms, to determine the percent atom economy
Higher atom economy reactions provide more of the desired product while producing less waste.
The following stages can be used as a generic method to compute the atom economy:
Create a chemical equation for the reaction provided.Equilibrate the variables.Utilizing the periodic table's atomic and formula masses, determine the masses of the reactants and products. The total mass of the reactants on the left side and the total mass of the products on the right side are always equal in a correctly balanced equation.Determine the atom economy percentage.
Hence, percentage atom economy is 62%
Learn more about Atom economy here:
https://brainly.com/question/17159753
#SPJ9
Question 5 (1 point) Which statement is NOT TRUE about molecules and compounds? a All molecules and compounds are made of atoms. b Compounds are made up of the same type of atom. c All molecules are compounds. d Molecules are made up of two or more chemically bonded atoms.
All molecules are not compounds. Option C.
What are compounds?A compound is a substance made from two or more atoms of different elements that are linked together by bonds. The bond could be an ionic, covalent, metallic, or hydrogen bond.
A molecule, on the other hand, is a group of atoms, the same or different, chemically bonded together and represents the smallest fundamental unit that can participate in chemical reactions.
Going by these two definitions, one can conclude that while all compounds are molecules, not all molecules are compounds. If the group of atoms that bond together is chemically identical, a molecule is formed but not a compound.
More on compounds can be found here: https://brainly.com/question/13516179
#SPJ1
What is the independent variable?
Time or Concentration?
PLEASE HELP ILL MARK BRAINEST!!! 35 POINTS!! THANK YOU
This chart above compares the reaction rate of a naturally occurring chemical reaction vs. the same reaction when an enzyme is involved.
a. Compare the differences between the two reactions, but also note what they have in common.
b. Explain the role the enzyme plays in the second reaction
c. Explain what the three bumps in the second reaction means and why the original reaction only has one bump.
In the image given, the difference in the activation energy is observed on addition of a catalyst in the same reaction.
Activation energy is the minimum initial energy needed for a reaction to start. It is denoted as [tex]E_a[/tex].
a) The difference between the reactions is that on addition of a catalyst, the activation energy is reduced to form the same product.
The similarity is that these peaks are basically the transition states where the energy is highest, and the reactant molecules are highly unstable and immediately get converted to the products.
b) Enzymes in the second reaction are the catalysts which increase the rate of the reaction and reduce the activation energy required for the reaction to happen. Not only do the enzymes reduce the activation energy, but they also introduce a multiple energy reaction pathway which must be fulfilled in order to form the products.
c) The second reaction is a multi-step reaction and occurs in a series of collisions, where each collision produces an intermediate molecule which collides further until the final product molecules are formed. Thus, each collision step has its own activation energy peak.
The original reaction has only one activation energy peak as the reactants collide once and form the products immediately thereby consuming a lot of energy.
Learn more about Activation energy here:
https://brainly.com/question/9967920
#SPJ9
Calculate the formula mass of sodium sulfate decahydrate, Na2SO4⋅10H2O , in atomic mass units (amu or u).
Answer:
Na
2
SO
4
.10H
2
O
=(2×23)+32+(4×16)+(10×18)
=46+32+64+180
=322
An increase in the concentrations of greenhouse gases in Earth’s atmosphere would have which of these effects on temperature?
An increase in the concentrations of greenhouse gases in Earth's atmosphere would cause an increase in the average temperatures on Earth's surface.
The greenhouse effect occurs when gases build up in the upper atmosphere of the Earth, where they absorb solar heat and trap it. Thus, the heat that ought to be fleeing into space is being held back on Earth. The following gases contribute to this effect:
Dioxide of CarbonMethaneNitrogen Oxidewith a ton more. However, the greenhouse effect is mostly caused by them. By retaining heat in the lower (rather than upper) atmosphere, this action will raise temperatures on the surface of the globe.
Heat from the sun would be trapped on Earth as the concentration of greenhouse gases (such the ones described) in the atmosphere increased, resulting in an increase in the global temperature.
Learn more about greenhouse gases here;
https://brainly.com/question/20558707
#SPJ9
Water (2450 g ) is heated until it just begins to boil. If the water absorbs 5.35×105 J of heat in the process, what was the initial temperature of the water?
Express your answer with the appropriate units.
The initial temperature of water is 47.8⁰C
In this case, the challenge is to determine how much heat is required to bring a particular sample of water from its original temperature to its boiling point.Given,
mass of water is 2450g
absorbed heat is 5.35×105 J
we have to find out initial temperature
First Calculate the change in temperature when 5.35×10^5 J of heat is provided to 2450g of water.
q = m . c . ∆T
q is amount of heat gained
m is the mass of water
c is the specific heat of the substance
∆T is change in temperature
Specific heat of water is 4.18 J/g⁰C
∆T = q / m . c
= 5.35×10^5 / 2450 × 4.18
= 52.2⁰C
Now we know that the final temperature of the water is
100⁰C and that this final temperature is 52.2⁰C
is higher than the initial temperature of the water.
So by, ∆T = T(f) - T(i)
T(i) = T(f) - ∆T
T(i) = 100⁰C - 52.2⁰C
= 47.8⁰C
Therefore, initial temperature of water is 47.8⁰C
Learn more about specific heat here:
https://brainly.com/question/27991746
#SPJ9
calculate the volume in (L) of 1.13x10^5 grams of liquid sodium which has a density of 0.929g/cm3
The volume of the liquid sodium is 121.64 L
What is density?The density of a substance is simply defined as the mass of the subtance per unit volume of the substance. Mathematically, it can be expressed as
Density = mass / volume
With the above formula, we can obtain the volume of the liquid. Details below
How to determine the volume of the sodium liquidMass of liquid = 1.13×10⁵ gDensity of liquid = 0.929 g/cm³Volume of liquid =?Density = mass / volume
Thus,
Volume = mass / density
Volume of liquid = 1.13×10⁵ / 0.929
Volume of liquid = 121636.17 cm³
Divide by 1000 to express in liter
Volume of liquid = 121636.17 / 1000
Volume of liquid = 121.64 L
Learn more about density:
https://brainly.com/question/952755
#SPJ1
In the Periodic Table below, shade all the elements for which the neutral atom has an outer electron configuration of ms^2nd^2, where n and m are integers, and m= n+1.
Answer:
Na+e-1=Na
Explanation:
dfh low so to homework all no lol Show
a tightly packed box of crackers contains 250 g of crackers and measures 7.0cm X 17.0.cm X 19.0 cm. what is the average density in kilograms per liter of the crackers in the package? Assume that the unused volume is negligible.
The average density in kilograms per litre of the crackers that measures 7.0cm X 17.0.cm X 19.0 cm is 0.1105Kg/L.
How to calculate average density?The density of a substance is a measure of the mass of matter contained by a unit volume. The density of a substance can be calculated using the following formula:
D = m/v
Where;
D = densitym = massv = volumeAccording to this question, a tightly packed box of crackers contains 250 g of crackers and measures 7.0cm X 17.0.cm X 19.0 cm.
Volume = 7.0cm X 17.0.cm X 19.0 cm = 2261cm³
1 cubic centimetre = 0.001 litre
2261cm³ = 2.261L
Density of the crackers = 0.25kg ÷ 2.261L
Density = 0.1105Kg/L
Therefore, the average density in kilograms per litre of the crackers that measures 7.0cm X 17.0.cm X 19.0 cm is 0.1105Kg/L.
Learn more about density at; https://brainly.com/question/6107689
#SPJ1
The ____ chemist would study how fast nitrogen and hydrogen form
Answer:
The Bio chemist would study how fast nitrogen and hydrogen form ammonia.
Explanation:
The periodic table is aanged by various patterns is there a pattern with regard to ionic charge? In three to five sentences, explain your reasoning and provide specific examples.
Answer: As you move down the column in the periodic table the ionic charge increases.
Explanation: This is because the effective nuclear charge (Z_sub_eff) provides a shielding constant so that the nuclear charge from the protons cannot interfere with the negative nuclear force of the electrons.
Yes, ionic charge patterns exist. Elements in the same group often share similar charges due to common valence electron configurations.
Indeed, a pattern emerges in terms of ionic charges within the periodic table. Elements within the same group (vertical columns) often exhibit similar ionic charges due to sharing common valence electron configurations.
For instance, Group 1 elements tend to form +1 cations (e.g., Na⁺, K⁺) by losing their single valence electron, while Group 2 elements form +2 cations (e.g., Mg²⁺, Ca²⁺) by losing two valence electrons. Similarly, elements in Group 17, known as halogens, commonly form -1 anions (e.g., F⁻, Cl⁻) by gaining one electron to achieve a stable electron configuration.
This recurring trend can be attributed to the desire of atoms to achieve a full valence shell, either by losing or gaining electrons, leading to predictable ionic charges within specific groups of elements.
To learn more about electron configurations here
https://brainly.com/question/13497372
#SPJ3