Answer:
9.598 × 10⁻¹¹ m
0.09598 nm
9.598 × 10⁻⁹ cm
Explanation:
Step 1: Given data
Distance between oxygen and hydrogen in water (d): 95.98 pm
Step 2: Convert "d" to meters
We will use the conversion factor 1 m = 10¹² pm.
95.98 pm × 1 m/10¹² pm = 9.598 × 10⁻¹¹ m
Step 3: Convert "d" to nanometers
We will use the conversion factor 1 m = 10⁹ nm.
9.598 × 10⁻¹¹ m × 10⁹ nm/1 m = 0.09598 nm
Step 4: Convert "d" to centimeters
We will use the conversion factor 1 m = 100 cm.
9.598 × 10⁻¹¹ m × 100 cm/1 m = 9.598 × 10⁻⁹ cm
The ocean has both deep currents and surface currents moving it around the Earth.
1.True
2.False
Answer: 1
Explanation: This is true.
The nucleus of an atom is positively charged
Answer:
It's because of the presence of protons.
Explanation:
A nucleus of an atom has protons and neutrons. We know that a proton has a charge of
+
1
, while a neutron has no charge, or
0
. Therefore, the nucleus of an atom will always have a positive charge.
How does weather impacts our lives
Answer:
Weather affects us in a huge number of ways. Climate influences the growth of crops, thus affecting the availability and kind of food we eat. Fluctuations in weather (e.g. dry spells, wet spells) also affect crops. Weather affects what clothes we wear.
Explanation:
what is einsteins theory of relativity?
Answer:
The laws of the universe are for all observers, and it was shown that the velocity of light in spacetime will be the same regardless of the subject's speed.
Explanation:
The principle outlines how things behave in time and space, so it could be used to model anything from black hole life to light shifting due to the gravitational, as well as the action of the terrestrial Planets in its orbit. Einstein's most popular hypothesis has far-reaching ramifications.
and heat.
4 Which increases the kinetic energy of the
particles that make up a bowl of soup?
A. dividing the soup in half
B. putting the soup in a refrigerator
C. heating the soup
for 1 min on a stove
D. decreasing the distance between the
particles that make up the soup
What method of heat transfer occurs when your skin feels hot outside on a sunny, summer day?
A. Conduction
B. Radiation
C. Vibration
D. Convection
Answer:
B. Radiation
Explanation:
Lol this weekend I got a rlly bad sunburn and ik a lot ab the sun
The method of heat transfer occurs when your skin feels hot outside on a sunny, summer day is radiation. Therefore, option B is correct.
What is radiation ?Energy that emanates from a source and moves through space at the speed of light is referred to as radiation. This energy has wave-like qualities and is accompanied by an electric field and a magnetic field. Radiation may also be referred to as electromagnetic waves.
As a mutagen, radiation has the potential to eventually cause cancer. Radiation has the power to kill cells or harm the DNA within them, which impairs the cells' capacity for reproduction and may ultimately result in cancer. High energy particles flow through your body when radiation is present.
The DNA in our cells can be harmed by radiation. Acute Radiation Syndrome (ARS) or Cutaneous Radiation Injuries can result from high radiation doses (CRI). Cancer may develop later in life as a result of high radiation doses.
Thus, option B is correct.
To learn more about radiation, follow the link;
https://brainly.com/question/1497235
#SPJ2
Which of the following represent Dinitrogen tricarbide
1) NC
2) NC2
3) N2C2
4) N203
Answer:
I think is nc2 that representsWhich organ is most directly involved in the excretion of waste products? Please help
Answer:
Explanation:
The liver
Answer:
Kidney
Explanation:
what happens during rusting
A. iron oxide decomposes to iron releasing oxygen
B. iron and oxygen react to form iron oxide
C. iron combusts in oxygen
D. water reacts with iron releasing oxygen
Answer: B
Explanation: I had an even lengthier explanation but Brainly is being a butthead. But I got it right on my test for those who want to know.
Rusting is the process of corroding metallic parts by the action of water and air. Iron forms iron oxide by reacting with water or air.
What is rusting ?Rusting is the process of corrosion of metallic parts by forming a red oxide film on the surface of the metals containing Fe. Metals on reacting with water or air destroys by the action of oxygen.
Mostly iron and copper undergo corrosion. Corrosion is an electrochemical process by which the metal part undergo reduction and deposits in cathode.
Iron easily undergo corrosion forming rust or the red colored iron oxide. Iron react with water through air or water and forms iron oxide on the metal surface which eventually cover the whole metal.
Find more on rusting:
https://brainly.com/question/18376414
#SPJ2
A home is heated by a system that uses sunlight to warm water in pipes. Which statement best describes this system?
A. An active solar system because sunlight shines on the pipes naturally.
B. A passive solar system because light from the sun generates electrical energy.
C. An active solar system because the sun's energy is collected and moved throughout the house.
D. A passive solar system because sunlight heats the home without generating electrical energy.
Answer:
In which part of a nuclear power plant does fission take place? A home is heated by a system that uses sunlight to warm water in pipes. Which statement best describes this system? An active solar system because sunlight shines on the pipes naturally.
Explanation:
Hope it helps
FOLLOW MY ACCOUNT PLS PLS
Answer:
In which part of a nuclear power plant does fission take place? A home is heated by a system that uses sunlight to warm water in pipes. Which statement best describes this system? An active solar system because sunlight shines on the pipes naturally.
Explanation:
How can I express the composition of a solution?
Answer:
It can be expressed in several ways: molarity (moles of solute per liter of solution); mole fraction, the ratio of the number of moles of solute to the total number of moles of substances present; mass percentage, the ratio of the mass of the solute to the mass of the solution times 100; parts per thousand (ppt), grams ...
Explanation:
It can be expressed in several ways: molarity (moles of solute per liter of solution); mole fraction, the ratio of the number of moles of solute to the total number of moles of substances present; mass percentage, the ratio of the mass of the solute to the mass of the solution times 100; parts per thousand (ppt), grams ...
Why should we try to use less oil, natural gas and electricity?
A 2.5-liter sample of a gas has 0.30 mole of the gas. If 0.15 mole of the gas is added, what is the final volume of the gas? Temperature and pressure remain constant.
Answer:
1.125
Explanation:
I think it is his because if you add 0.30 and 0.15 it adds up to 0.45 so you just multiply 0.45 and 2.5 and then it gives you 1.125. HOPE IT HELPS.
Particle motion in ice is _________
than particle motion in water.
Answer:
slower(less faster)
the particles motion in a liquid state of a substance is faster than the particle motion in substance's solid state.
Particle motion in ice is slower than particle motion in water.
What is the motion of particles?The motion of particles is the random movement of the particles or electrons inside the atoms. These movements happen due to an increase in temperature or heat.
There are three types of matter, solid, gas, and liquid. These matters have different particle movements. Because these matters have different organizations of charged particles within them.
As ice is solid, the particles in solid have compact particle present. These particles are near to each other and do not move. And water is liquid, its particles move randomly. As liquid move and get the shape of the container. Its particles are in motion.
Thus, particle motion in ice is slower than particle motion in water.
To learn more about the motion of particles, refer to the link:
https://brainly.com/question/11155407
#SPJ2
The amount of energy transferred per unit time by an electrical appliance is measured in what? Give the
name not the symbol.
Answer:
The Watt
Explanation:
Electric power is the rate, per unit time, at which electrical energy is transferred by an electric circuit. The SI unit of power is the watt, one joule per second.
The amount of energy transferred per unit time is called power, and power is measured in Watt.
What is Watt?Watt is the unit of power. It is used to measure the transfer of power. This is named after James Watt.
When one joule of energy is transferred in one second, this is the power of the Watt.
Thus, the amount of energy transferred per unit time is called power, and power is measured in Watt.
Learn more about Watt
https://brainly.com/question/2510568
#SPJ2
How many grams is 2.40 x 1023 molecules of N,O,? (5 pts)
PLS HELP ASAP
Answer:
30.26 grams of N₂O₃
Explanation:
Divide by Avogadro's number. This leaves you with the number of moles. Then, multiply by the molar mass of N₂O₃
Which of the following statements describes the elements in group 16 of the periodic table?
No links!
Answer:
C.
Explanation:
Nitrogen oxide is a gas that is injected into potatoes chip bags right before they are sealed. How
many moles of nitrogen oxide are in a bag at 760 mmHg, 273 K, and has a volume of 1.0 liter?
(2 sig figs)
Explanation:
[tex]pressure = 760mm \: of \: mercury \\ = 101325 \: pascals \\ from \: PV = nRT \\ 101325 \times 1 = n \times 8.314 \times 273 \\ n = 44.6 \: moles[/tex]
Answer:
740
Explanation:
The nitrogen is combined with it.
PLEASE HELP
Activation energy is
a. the energy required to form the activation complex.
b. the net energy difference between the products and reactants.
c. the heat of reaction.
d. free energy.
How many molecules of As4010 are in 6.2 mol of As4010?
If the speed of light is 3.0 × 108 m/s2, then how much energy would be released if a 23.7 gram object is converted to pure energy?
A. 2.133 x 10^15 J
B. 3.797 x 10^18 J
C. 7.11 x 10^6 J
D. 2.133 x 10^18 J
Answer:
B:
Explanation:
Hopes this help best friends.
Answer:
D
Explanation:
Cause b is not the right answer and when calculating you get D So I hope you guys understand
how many grams of AgNO3 (MM=169.87) are needed to prepare 0.125 M solution in 250 mL of water?
a. 0.5 g
b. .03 g
c. 5.3 g
d. 84.9g
Answer:
Correct answer-C 5.3g
Explanation:
Molarity = no. of moles of solute/ volume of of solution in litre
olarity = no. of moles of solute/ volume of of solution in litreno of moles of solute = 0.125×0.25=0.03125
olarity = no. of moles of solute/ volume of of solution in litreno of moles of solute = 0.125×0.25=0.03125one mole AgNO3 weighs 169.87 gm,
olarity = no. of moles of solute/ volume of of solution in litreno of moles of solute = 0.125×0.25=0.03125one mole AgNO3 weighs 169.87 gm,so the mass of 0.03125 moles of AgNO3 = 0.03125×169.87= 5.3084g
The grams of AgNO₃ are needed to prepare 0.125 M solution in 250 mL of water is 5.3 grams.
How do we calculate mass from moles?Moles is a unit which is used to define any amount and it is calculated as:
n = W/M, where
W = required mass
M = molar mass
Given molarity of AgNO₃ = 0.125 M
Volume of water = 250mL = 0.25L
moles (n) from the molarity (M) will be calculated as:
n = M × V
n = (0.125)(0.25) = 0.0312 moles
Now we calculate the mass of AgNO₃ by using the above formula as:
W = (0.0312mol)(169.87g/mol)
W = 5.30 g
Hence option (c) is correct.
To know more about moles, visit the below link:
https://brainly.com/question/15374113
3. Determine the pH of each of the following solutions. (Hint: See Sample Problem B.) a. 1.0 x 10-2 M HCI c. 1.0 x 10-MHI b. 1.0 x 10-3 M HNO3 d. 1.0 x 10-M HB
Answer:
a. pH = 2 b. pH = 3 c. pH = 1 d. Unanswerable
Explanation:
pH = -log[H+] OR pH = -log{H3O+]
and inversely
pOH = -log[OH-]
1. Determine what substance you are working with, (acid/base)
2. Determine whether or not that acid or base is strong or weak.
a. 1.0 x 10^-2M HCl
HCl is a strong acid, therefore it will dissociate completely into H+ and Cl- with all ions going to the H+, therefore, the concentration of HCl and concentration of H+ are going to be equal, meaning we simply take the negative logarithm of the concentration of HCl and that would equal pH
pH = -log[H+]
pH = -log(1.0x10^-2)
pH = 2
b. 1.0 x 10^-3M HNO3
HNO3 like part a, is a strong acid, therefore it would simply require you to take the negative logarithm of the concentration of the compound itself, to find its pH.
pH = -log[H+]
pH = -log(1.0 x 10^-3)
pH = 3
c. 1.0 x 10^-1M HI
Like the previous parts, HI is a strong acid
pH = -log[H+]
pH = -log(0.10)
pH = 1
d. HB isn't an element, nor is it a compound so that would be unanswerable.
Write a balanced equation for the following:
1. P4 + O2 → P2O5
2. C3H8 + O2 → CO2 + H2O
3. Ca2Si + Cl2 → CaCl2 + SiCl4
plz help me 14 points
By what factor does the average kinetic energy of the molecules of gas in an aerosol container increase when the temperature is raised from 300 K to 900 Κ?
Answer:
The average kinetic energy is increased by a factor of 3.
Explanation:
The average kinetic energy is given by:
[tex] \overline{E} = \frac{3}{2}kT [/tex]
Where:
k: is the Boltzmann constant
T: is the temperature
When the temperature is 300 K we have:
[tex] \overline{E_{1}} = \frac{3}{2}300k [/tex]
Now, when the temperature is 900 K:
[tex] \overline{E_{2}} = \frac{3}{2}900k = 3(\frac{3}{2}300k) = 3\overline{E_{1}} [/tex]
Therefore, when the temperature is raised from 300 K to 900 Κ, the average kinetic energy is increased by a factor of 3.
I hope it helps you!
Describe how wave frequency changes across the electromagnetic spectrum, from radio waves to gamma rays
By increasing the frequency which changes the wavelength, frequency changes across the electromagnetic spectrum, from radio waves to gamma rays.
What is the electromagnetic spectrum?The electromagnetic spectrum is a wide range of frequencies that vary depending upon the wavelength of the spectrum and somehow the energy of photons also affects the frequencies and wavelengths.
There are three types of electromagnetic spectrum hydrogen spectrum emission spectrum due to the emission of light and absorption spectrum due to absorption of light.
Therefore, frequency changes across the electromagnetic spectrum, from radio waves to gamma rays are By increasing the frequency which changes the wavelength.
Learn more about the electromagnetic spectrum, here:
https://brainly.com/question/18704022
#SPJ2
One major problem with wind and solar energy is that they are conditional. Explain how hydroelectric pumped storage could be used to eliminate this
obstacle? *
Link to the article https://thinkprogress.org/the-inside story-of-the-worlds-biggest-battery-and-the-future-of-renewable-energy-8984c81283c/
Answer:
Hydroelectric pumped storage can be used to eliminate the conditional nature of wind and solar energy. At times of peak production of energy from either solar or wind (during summer and windy days), the excess electrical energy produced can be stored using hydroelectric pumped storage methods. When conditions no longer favour energy production from either wind or solar sources, these stored energy can then be regenerated for use.
Explanation:
Pumped-storage hydroelectricity is a type of hydroelectric energy storage used by electric power systems to store excess electrical power during periods of low demand for later release at periods when demand for energy rises again. It stores energy in the form of gravitational potential energy of water, pumped from a lower level reservoir to a higher level reservoir.
At times of low electrical demand, excess generated energy is used to pump water into the upper reservoir. When there is higher demand, water is released back into the lower reservoir through a turbine, generating electricity.
This form of energy storage is useful in circumventing the conditional nature of renewable energy sources such as wind and solar energy. At times of peak production of energy from either solar or wind (during summer and windy days), the excess electrical energy produced can be stored using hydroelectric pumped storage methods. When conditions no longer favour energy production from either wind or solar sources, these stored energy can then be regenerated for use.
5)
Which statement is true about a liquid but not a gas?
A)
It has more internal energy than the solid state.
B)
It will change shape and take the shape of its container
C)
It allows particle to move past each other relatively easily.
D)
It has close to a constant volume as pressure is applied to it.
Answer:
D) It has close to a constant volume as pressure is applied to it.
This is true for liquids but not for gas because on changing the pressure volume of gas may not be constant always
Helped by the one and only #DrippQueenMo
Even though the same amount of energy was transferred into both substances from the air, the isopropanol evaporated while the water did not. Why do you think the isopropanol changed phase, but the liquid water did not ... Earlier in the lesson, you observed isopropanol and water drops on a paper towel.HELP HELP PLS
Answer:
The isopropanol evaporated while the water did not because the molecules don't stick together as strongly as the molecules in the water do. The water would need more energy transferred in, in order to evaporate.
Explanation:
The isopropanol evaporates and the water does not because the heat capacity and the latent heat of isopropanol is far lesser than that of water.
The latent heat of vaporization is the amount of heat required by a given amount of substance to change its phase from liquid to gas. The latent heat of vaporization of isopropanol is far less than water, so at the same amount of heat, the isopropanol changes phase as it can easily evaporate even if a small amount of heat is provided. Whereas water requires to absorb a lot of heat energy to change its phase, since its latent heat of vaporization and specific heat capacity is very large as compared to isopropanol.
Learn more about latent heat :
https://brainly.com/question/5401454