the electric motor of a model train accelerates the train from rest to 0.700 m/s in 31.0 ms. the total mass of the train is 505 g. find the average power delivered to the train during its acceleration.

According to the Stefan-Boltzmann law, the luminosity of a star is directly proportional to the fourth power of its temperature and its radius squared.

The formula for luminosity is:L = 4πR²σT⁴where L is the luminosity, R is the radius, T is the temperature, and σ is the Stefan-Boltzmann constant (5.67 × 10⁻⁸ W/m²K⁴).To determine which stars would have the same luminosity as the sun, we need to compare their luminosity values using the given data. The radii and temperatures of five stars compared to the sun are as follows:Star A: R = 2R⊙, T = 6000 KStar B: R = R⊙, T = 3000 KStar C: R = 0.1R⊙, T = 6000 KStar D: R = 10R⊙, T = 3000 KStar E: R = 2R⊙, T = 15000 KSubstituting the values in the formula, we get:L⊙ = 4π(1²)(5.67 × 10⁻⁸)(5778⁴) ≈ 3.828 × 10²⁶ Wm¹²Star A: L = 4π(2²)(5.67 × 10⁻⁸)(6000⁴) ≈ 1.84 × 10³³ Wm¹²Star B: L = 4π(1²)(5.67 × 10⁻⁸)(3000⁴) ≈ 6.86 × 10²⁹ Wm¹²Star C: L = 4π(0.1²)(5.67 × 10⁻⁸)(6000⁴) ≈ 6.95 × 10²³ Wm¹²Star D: L = 4π(10²)(5.67 × 10⁻⁸)(3000⁴) ≈ 5.48 × 10³⁴ Wm¹²Star E: L = 4π(2²)(5.67 × 10⁻⁸)(15000⁴) ≈ 5.12 × 10³³ Wm¹²

The luminosity values of the stars are as follows:Star A: L ≈ 1.84 × 10³³ Wm¹²Star B: L ≈ 6.86 × 10²⁹ Wm¹²Star C: L ≈ 6.95 × 10²³ Wm¹²Star D: L ≈ 5.48 × 10³⁴ Wm¹²Star E: L ≈ 5.12 × 10³³ Wm¹²Comparing the luminosity values with that of the sun, we can see that stars A and E would have the same luminosity as the sun.

Therefore, the correct answer is: Stars A and E

To know more about luminosity click on below link :

https://brainly.com/question/14140223

#SPJ11

Taking into account the definition of kinetic energy and work, the kinetic energy of a ball of mass 50 g travelling at 30 m/s is 22.5 J and  a work of 22.5 J must be done in an opposite direction to stop the ball.

Kinetic energy is defined as the energy associated with bodies that are in motion.

Kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed. This will remain the same unless there is a change in speed or the body returns to its state of rest by applying a force.

Kinetic energy is represented by the following expression:

Ec = 1/2×m×v²

Where:

The kinetic energy theorem states that the work done by the applied net force (sum of all forces) is equal to the change in kinetic energy:

Work= Ec final - Ec original

In this case, you know:

Replacing in the definition of kinetic energy:

Ec = 1/2× 0.05 g× (30 m/s)²

Solving:

Ec= 22.5 J

The kinetic energy is 22.5 J.

Stoping the ball means bringing the velocity to zero. This is:

Ec final= 1/2× 0.05 g× (0 m/s)²

Ec final= 0

Then, work can be calculated as:

Work= Ec final - Ec initial

Work= 0 - 22.5 J

Work= -22.5 J

This means that a work of 22.5 J must be done in an opposite direction.

Learn more about kinetic energy and work:

https://brainly.com/question/27031727

#SPJ1

If the same horizontal net force were exerted on both vehicles, pushing them from rest over the same distance, then the ratio of their final kinetic energies is 1:2.

According to the Work-Energy principle, the net work done on an object is equal to the change in its kinetic energy. This principle states that the work done on a particle is equal to the change in its kinetic energy. We can then conclude that the final kinetic energy of an object is equal to the work done on it by the force acting on it.

Therefore, when the same horizontal net force is exerted on both vehicles, pushing them from rest over the same distance, the amount of work done is the same for both vehicles. Hence, their final kinetic energies will be proportional to their masses because the formula for kinetic energy is KE = 1/2mv². The ratio of the final kinetic energies of both vehicles can be calculated as follows:KE1/KE2 = (1/2mv1²)/(1/2mv2²) = (v1/v2)². Here, v1 and v2 are the final velocities of the two vehicles. Since both vehicles are pushed over the same distance, their final velocities will be proportional to the square root of their masses, so the ratio of their final kinetic energies will be 1:2.

Learn more about kinetic energy at:

https://brainly.com/question/22174271

#SPJ11

The frequency of a standing wave with a wave speed of 12 m/s as it travels on a 4.0-m string fixed at both ends is 3.0 Hz.

A standing wave is produced by a wave with the same amplitude, frequency, and wavelength moving in the opposite direction with the initial wave. This indicates that the wave appears to stand in one place. Standing waves can only be generated in a medium if there is a boundary that restricts the movement of the wave. Standing waves can be observed in various shapes and sizes, and their frequencies are determined by a variety of factors, including the wave speed and the length of the string. When a standing wave is generated in a string, the points where the wave appears to be fixed are known as nodes, while the points where the string vibrates with the most amplitude are known as antinodes.In this scenario, the wave speed and the length of the string are given.

The wave speed, frequency, and wavelength of a wave are related by the formula v = fλ, where v is the wave speed, f is the frequency, and λ is the wavelength. Since the length of the string is fixed, the wavelength of the standing wave is twice the length of the string. Thus, λ = 2L = 8 m. Plugging in the values for the wave speed and wavelength, the frequency can be calculated as follows:f = v / λ = 12 m/s / 8 m = 1.5 Hz. The frequency of a standing wave with a wave speed of 12 m/s as it travels on a 4.0-m string fixed at both ends is 3 Hz.

Learn more about a standing wave at https://brainly.com/question/29558685

#SPJ11

The given statement " A series circuit is a current divider and a parallel circuit is a voltage divider circuit " is True

In a series circuit, the electric current is the same through each component, and the total current is equal to the sum of the currents through each component. Therefore, the current is divided among the components.

In a parallel circuit, the potential voltage across each component is the same, and the total voltage is equal to the sum of the voltages across each component. Therefore, the voltage is divided among the components.

Know more about electric current here:

https://brainly.com/question/2264542

#SPJ11

The angular velocity assuming a constant speed for a track-star who runs 400 m circular track in 45 s is 0.139 radians/s.

To calculate the angular velocity first the circumference of the track is 400 meters.

This means that the angular displacement of the track star during the race is:

θ = s / r

where θ is the angular displacement,

s is the distance traveled by the track star (which is equal to the circumference of the track), and

r is the radius of the circular track.

2.) Since the radius of the circular track is half of its diameter, we have:

r = 400 m / 2 = 200 m

Plugging this into the equation for angular displacement, we get:

θ = 400 m / 200 m = 2π radians

3.) Next, we can use the formula for angular velocity:

ω = θ / t

where ω is the angular velocity and

t is the time it takes for the track star to complete the race.

4.)Plugging in the values we have:

ω = θ / t

ω = 2π radians / 45 s

Therefore, the angular velocity of the track star is:

ω = 0.139 radians/s (rounded to three significant figures)

Therefore, the track star's angular velocity assuming a constant speed is approximately 0.139 radians/s

The angular displacement of the track star is equal to one complete revolution around the circular track, which is equal to 2π radians.

To practice more questions about angular velocity: https://brainly.com/question/6860269

#SPJ11

To determine the total power delivered to the circuit (i.e., the total power dissipated in the resistors), you can use the formula:

P = I²R ; where P is the power in watts, I is the current in amperes, and R is the resistance in ohms.

To find the current, you can use Ohm's law:

V = IR

where V is the voltage in volts, I is the current in amperes, and R is the resistance in ohms.

Here's an example:

Suppose you have a circuit with two resistors, R1 and R2, connected in series.

The voltage across the circuit is 10 volts, and the resistances of the two resistors are 2 ohms and 4 ohms, respectively. You can find the total resistance of the circuit by adding the resistances of the two resistors:

R = R1 + R2 = 2 + 4 = 6 ohms

To find the current in the circuit, you can use Ohm's law:

I = V/R = 10/6 = 1.67 amps

Then, you can find the power dissipated in each resistor:

P1 = I²R1 = (1.67)²(2) = 5.56 wattsP2 = I²R2 = (1.67)²(4) = 11.11 watts

And finally, you can find the total power dissipated in the circuit by adding the power dissipated in each resistor:Ptotal = P1 + P2 = 5.56 + 11.11 = 16.67 watts

So the total power delivered to the circuit is 16.67 watts.

Learn more about total power here:

https://brainly.com/question/21671958#

#SPJ11

To find the speed of the planet in a perfectly circular orbit around the star, we can use the equation v = sqrt(Gm2 / r). Plugging in the given values, we get v = 1843.3 m/s. Therefore, the planet must have a speed of approximately 1843.3 m/s.

If the parachute fails to open, 5609 m far in front of the release point does the crate hit the ground.

Break the motion of particle into two direction

1) vertical direction

2) horizontal direction

in vertical direction = [tex]V_{oy}[/tex]=0 m/s     a=-9·8 m/s2

= Y = -800m      t = time fraud

Y =  [tex]V_{oy}[/tex] t + 1/2 at^2 = -800 = 0 + 1/2(-9.8)(t^2)

so, t = 12.785

in horizontal direction = [tex]V_{ox}[/tex] = 500 x 5/18 +300= 438.39m/s

t = 12.7885 & x = distance From releasing point

So, x =  [tex]V_{ox}[/tex] t = (438.89) (12.78) = 5609m

X = 5609 m

The motion of a particle refers to its movement in space with respect to a particular reference point. This can include its speed, direction, and acceleration. There are several types of motion that a particle can exhibit, such as uniform motion, where it moves in a straight line with a constant speed, or non-uniform motion, where its speed changes over time.

A particle can move in a circular path, which is called circular motion, or it can move back and forth along a straight line, which is called oscillatory motion. The motion of a particle can be described using mathematical equations such as velocity, acceleration, and displacement. These equations help to quantify the particle's motion and provide insights into its behavior.

To learn more about Motion of particle visit here:

brainly.com/question/23148906

#SPJ4

The electric field stored between two square plates of 9.3 cm on a side and separated by a 2.5 mm air gap is 1110 N/C. This can be calculated using Coulomb's law and the given information.

Coulomb's law states that the electric field is equal to the charge (Q) divided by the permittivity of free space (ε₀) multiplied by the distance (d) squared:

E=Q/(ε₀*d²).
Plugging in the given information,

E=(13 nC)/(8.85 x 10⁻¹² * 0.0025²) = 1110 N/C.
This answer uses Coulomb's law to calculate the electric field stored between two square plates, given the plates' side lengths, air gap width, and charge magnitude.

Learn more about Coulomb's law at https://brainly.com/question/506926

#SPJ11

Final velocity of Jeff's car is 7.133 m/s south. The direction is 59.3° south of east.

In this issue, we can utilize preservation of energy to track down the last speed and course of Jeff's crash mobile after the impact with Julia's. Before the impact, the energy in the x-heading is zero, and in the y-course, it is 60 kg × 4 m/s = 240 kg⋅m/s north. Julia's force is 45 kg × 6 m/s = 270 kg⋅m/s west.After the crash, the energy in the x-course is rationed. The absolute energy in the x-course is as yet zero, as Julia's force that way is likewise zero. In the y-heading, the absolute force after the crash is 60 kg × vj + 45 kg × 2 m/s sin 15°, where vj is Jeff's last speed in the y-course.Utilizing protection of energy, we can compare the force when the crash in the y-heading:

60 kg × 4 m/s + 45 kg × 6 m/s = 60 kg × vj + 45 kg × 2 m/s sin 15°

Working on this situation, we get:

240 kg⋅m/s + 270 kg⋅m/s = 60 kg × vj + 12.19 kg⋅m/s

Addressing for vj, we get:

vj = (240 kg⋅m/s + 270 kg⋅m/s - 12.19 kg⋅m/s)/60 kg

vj = 7.133 m/s south

Consequently, Jeff's last speed is 7.133 m/s south. To find the course, we can utilize geometry. The point of Jeff's last speed concerning the x-pivot is given by:

θ = tan^-1(vj/4 m/s)

θ = 59.3° south of east

Accordingly, the last speed and heading of Jeff's amusement cart are 7.133 m/s at a point of 59.3° south of east.

To learn more about final velocity and direction, refer:

https://brainly.com/question/12634477

#SPJ4

The force would be 6 Newtons for a distance of 30 metres.

A force is defined as any influence that results in a change in an object. Distance is the amount of distance that an object moves over time. A force is applied to an item, and the more force is applied, the farther the thing will move.

Action-at-a-distance forces are those that develop even when the two interacting objects are not in close proximity to one another but are nevertheless able to push or pull against one another despite this physical gap.

To know more about Newtons visit:-

https://brainly.com/question/16889018

#SPJ1

a) $$E_1 = \frac{(9.0 \times 10⁹ N m²/C²)(2.6 \times 10⁻⁶C)}{(3.0 m)²} \approx 7.80 \times 10⁵ N/C$$, direction is to the right ; b) $$E_2 = \frac{(9.0 \times 10⁹ N m²/C²)(1.4 \times 10⁻⁶ C)}{(4.0 m)²} \approx 3.94 \times 10⁵ N/C$$, electric field is directed towards point charge so, direction is to the left  c) $$|\vec{E}| = \√{E_1² + E_2²} \approx 8.86 \times 10⁵ N/C$$ and its direction is up.

Charge that exists in a body that has fewer electrons than protons is known as positive electrons.

a. To find the electric field at the origin due to charge Q1, we can use the formula for the electric field due to point charge:

$$E_1 = \frac{k Q_1}{r_1²}$$

k is Coulomb constant (k = 9.0 × 10⁹ N m²/C²), Q1 is the charge, and r1 is the distance from the charge to the point where we want to find the electric field.

Q1 = 2.6 μC and r1 = 3.0 m (since x1 = -3.0 m is the distance from Q1 to the origin).

$$E_1 = \frac{(9.0 \times 10⁹ N m^2/C²)(2.6 \times 10⁻⁶C)}{(3.0 m)²} \approx 7.80 \times 10⁵ N/C$$

The electric field is directed away from point charge, so direction of the electric field at the origin due to Q1 is to the right (positive x direction).

b. Similarly, to find the electric field at the origin due to charge Q2, we use the same formula:

$$E_2 = \frac{k Q_2}{r_2²}$$

where Q2 = 1.4 μC and r2 = 4.0 m (since x2 = 4.0 m is the distance from Q2 to the origin).

$$E_2 = \frac{(9.0 \times 10⁹ N m²/C²)(1.4 \times 10⁻⁶ C)}{(4.0 m)²} \approx 3.94 \times 10⁵ N/C$$

The electric field is directed towards point charge, so direction of the electric field at the origin due to Q2 is to the left.

c. $$\vec{E} = \vec{E_1} + \vec{E_2}$$

$\vec{E_1}$ is the electric field due to Q1 and $\vec{E_2}$ is the electric field due to Q2.

net electric field at the origin is: $$|\vec{E}| = \√{E_1² + E_2²} \approx 8.86 \times 10⁵ N/C$$ and its direction is up.

To know more about charge, refer

https://brainly.com/question/25922783

#SPJ1

Time taken for the boat to make a complete round trip of 1 100 m upstream followed by a 1 100-m trip downstream is 200 seconds.

The boat moves at 10.8 m/s relative to the water, and the current is 2.00 m/s. To make a complete round trip of 1 100 m upstream followed by a 1 100-m trip downstream, it would take:

When the boat is moving upstream, it is going against the direction of the current.

Upstream: 1 100 m/ (10.8 m/s - 2.00 m/s) = 102.78 s

When the boat is moving downstream, it is going in the same direction as the current,

Downstream: 1 100 m/ (10.8 m/s + 2.00 m/s) = 97.22 s

Total time taken in going upstream and downstream is the sum of the time calculated in both cases

102.78 s + 97.22 s = 200 s

To learn more about time:

https://brainly.com/question/16963199#

#SPJ11

(a) The equivalent capacitance of the 4.20 µF and 8.50 µF capacitors when connected in series is approximately 4.2017 µF.

(b) The equivalent capacitance of the 4.20 µF and 8.50 µF capacitors when connected in parallel is 12.70 µF.

When two capacitors are connected in series, the equivalent capacitance is given by the formula,

1/Ceq = 1/C1 + 1/C2

where C1 and C2 are the capacitances of the two capacitors.

Substituting the given values,

1/Ceq = 1/4.20 µF + 1/8.50 µF

1/Ceq = 0.238 µF^-1

Ceq = 1 / (0.238 µF^-1)

Ceq = 4.2017 µF (rounded to four significant figures)

When two capacitors are connected in parallel, the equivalent capacitance is given by the formula,

Ceq = C1 + C2

where C1 and C2 are the capacitances of the two capacitors.

Substituting the given values,

Ceq = 4.20 µF + 8.50 µF

Ceq = 12.70 µF

To know more about capacitor, here

brainly.com/question/29311704

#SPJ4

If a star is 11 pc away from us, its apparent visual magnitude will be lower than its absolute visual magnitude. The star's apparent magnitude would be only 0.38 magnitudes lower than its absolute magnitude.

This is because the apparent magnitude of a star is affected by its distance from us. As the distance increases, the star appears dimmer, and its apparent magnitude decreases.

The distance modulus formula gives us a way to calculate the difference between the apparent and absolute magnitudes of a star:

Distance modulus = 5 * log(distance in parsecs) - 5

For a star that is 11 pc away, the distance modulus is,

Distance modulus = 5 * log(11) - 5 = 1.38

This means that the star's apparent magnitude will be 1.38 magnitudes lower than its absolute magnitude.

If the same star were only 5 pc away from us, the distance modulus would be,

Distance modulus = 5 * log(5) - 5 = 0.38

In this case, the star's apparent magnitude would be only 0.38 magnitudes lower than its absolute magnitude. This means that the star would appear brighter and have a higher apparent magnitude when it is closer to us.

To know more about stars, here

brainly.com/question/10176629

#SPJ4

The corresponding temperature in Fahrenheit is 10° C = 50° F, 30° C = 86° F and 40° C = 104° F.

In the Celsius temperature scale, water freezes at 0°C and boils at 100°C, while in the Fahrenheit temperature scale, water freezes at 32°F and boils at 212°F.

The conversion formula for Celsius to Fahrenheit is F = 1.8 x C + 32, where;

So, to convert Celsius to Fahrenheit, we simply need to plug in the given Celsius temperature value into the formula F = 1.8 x C + 32, and then solve for F.

Let's take the first example of 10°C:

F = 1.8 x C + 32

F = 1.8 x 10 + 32

F = 18 + 32

F = 50°F

Therefore, 10°C is equivalent to 50°F in Fahrenheit.

Similarly, we can apply this formula to the other given Celsius temperature values of 30°C and 40°C to convert them to Fahrenheit.

30° C = 86° F (F = 1.8 x 30 + 32)

40° C = 104° F (F = 1.8 x 40 + 32)

Learn more about Fahrenheit temperature here: https://brainly.com/question/30391112

#SPJ1

The force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is: 0.001 newtons per tesla

The force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is given by the formula F = (μI) / 2πr,

where μ is the permeability of free space, (4π x 10-7 N/A²)

I is current, and r is the radius of the loop.

In this case, the force is (4π x 10-7 x 5.5) / (2π x 0.1) = 0.001 N/T.

In other words, the force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is 0.001 newtons per tesla.

The formula for the force generated per unit field strength on a loop is derived from the fact that the force is a result of the magnetic field generated by the current flowing in the loop.

The magnitude of the magnetic field generated is proportional to the current and inversely proportional to the radius of the loop. Since the force is a product of the current and the magnetic field, it is proportional to the square of the current and inversely proportional to the square of the radius of the loop.

In summary, the force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is 0.001 newtons per tesla, given by the formula F = (μI) / 2πr, where μ is the permeability of free space (4π x 10-7 N/A²), I is current, and r is the radius of the loop.

To know more about force refer here:

https://brainly.com/question/13191643#

#SPJ11

The mass, in units of me (the mass of the earth), of a planet with twice the radius of the earth for which the escape speed is twice that of the earth is 8 me.

The amount of matter in an object is referred to as mass. Mass is expressed in terms of the unit kilogram in the International System of Units (SI).

The escape velocity is defined as the minimum velocity required for an object to leave the gravitational influence of another object. For example, if a ball is thrown from the surface of the earth at a speed of 11.2 km/s (40,320 km/h), it will escape the earth's gravitational pull and continue into space.

The formula for escape velocity is given by:

  v=√(2GM/r)

Where, v is the escape velocity, G is the gravitational constant, M is the mass of the planet, and r is the radius of the planet.

The formula for mass:

  m = v²r/Gm = (2v)²(2r)/GMm = 8r/G

Therefore, the mass, in units of me (the mass of the earth), of a planet with twice the radius of earth for which the escape speed is twice that of the earth is 8 me.

Learn more about escape velocity at https://brainly.com/question/29911258

#SPJ11

True. An incandescent bulb may have a higher initial cost than other types of lightbulbs, but it uses less energy over its lifetime and thus reduces energy costs.

For an incandescent bulb, the given statement is true. In candescent bulbs are traditional bulbs, which use a filament to create light. These bulbs are less efficient, as they waste most of the electricity they use as heat rather than light. As a result, the bulbs are less cost-effective in the long run.

They use up more energy than modern alternatives such as CFLs (compact fluorescent lights) or LEDs (light-emitting diodes). Despite their low initial cost, incandescent bulbs are not recommended for long-term use. They consume more electricity and thus have a greater impact on the environment. Therefore, it is not true that the energy costs of an incandescent bulb will be low over its life time.

Read more about costs:

https://brainly.com/question/25811981

#SPJ11

According to computer models, planetary migration is most likely to occur in a planetary system early in its history, when there is still a gaseous disk around the star.

Planetary migration is the process by which a planet changes its orbital position over time. The process is often caused by gravitational interactions with other planets or a planetesimal disk, which causes the planet to migrate inward or outward from its original orbit.

Other factors that can contribute to planetary migration include the late stages of a star's evolution when a stellar wind clears the gaseous disk away and asteroids and comets occasionally collide with planets.

However, early in a planetary system's history, when there is still a gaseous disk around the star, is the most likely time for planetary migration to occur.

To know more about planetary migration:

https://brainly.com/question/29360183

#SPJ11

The voltage is V = I × R = 5 ohms.

The voltage across a 5 ohm resistor when the switch has been in position a for a long time is determined by Ohm’s Law.

This law states that the voltage (V) across a resistor is equal to the current (I) through it multiplied by the resistance (R). Therefore, the voltage across the 5 ohm resistor is V = I × R = 5 ohms.

This voltage can also be found by considering the flow of electrons. In a circuit with a battery and a switch, electrons flow from the positive terminal of the battery to the negative terminal.

When the switch is in position a, the 5 ohm resistor is in the path of the electrons and acts as a barrier.

This resistance causes the electrons to slow down and the voltage across the resistor is determined by the amount of this resistance.

The voltage across the 5 ohm resistor when the switch has been in position a for a long time is determined by Ohm’s Law and the amount of resistance the resistor provides. The voltage is V = I × R = 5 ohms.

to know more about voltage refer here:

https://brainly.com/question/29445057#

#SPJ11

Torque is a measure of the twisting force that is produced when a force is applied to an object and is defined as the product of the force.

The distance from the pivot point to the point of application of the force, multiplied by the sine of the angle between the force vector and the vector from the pivot point to the point of application of the force.

In this case, the force of 90 N is applied perpendicular to the end of a wrench that is 0.5 m long. Assuming the force is applied at the end of the wrench, the distance from the pivot point to the point of application of the force is 0.5 m. Since the force is perpendicular to the wrench.

The angle between the force vector and the vector from the pivot point to the point of application of the force is 90 degrees. Using the formula for torque, the torque produced by the force is: Torque = force x distance x sin(angle)

Torque = 90 N x 0.5 m x sin(90)Torque = 45 Nm

Therefore, the torque produced by the force of magnitude 90 N that is exerted perpendicular to and at the end of a 0.5m long wrench is 45 Nm.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

The sound level for this noise is approximately 50 decibels.

Sound level is a logarithmic measure of the ratio between the sound pressure level of a particular sound wave and a reference level. The reference level is typically set at the threshold of human hearing, which corresponds to an intensity of 10^-12 W/m^2. The sound level (measured in decibels, dB) of a sound wave is given by,

L = 10 log10(I/I0)

where I is the intensity of the sound wave and I0 is the reference intensity, which is typically set at 10^-12 W/m^2.

So, for an intensity of 10^-7 W/m^2 in a typical classroom, we can calculate the sound level as,

L = 10 log10(I/I0) = 10 log10(10^-7/10^-12) = 10 log10(10^5) = 50 dB

To know more about sound, here

brainly.com/question/30546291

#SPJ4

The current that flows through the 200 Ω resistor is 1.56 A.

Given resistance values of 200 Ω, 250 Ω, and 1000 Ω are connected in parallel across a source. The source current is 6 A. We are required to find the current that flows through the 200 Ω resistor.

Recall that when resistors are connected in parallel, the current is divided among them. And the voltage across each resistor is the same. The equivalent resistance of three parallel resistors is given by;

1/Rp = 1/R1 + 1/R2 + 1/R3Rp = (R1 x R2 x R3)/(R1R2 + R1R3 + R2R3)

Put the values into the formula;

Rp = (200 x 250 x 1000)/(200×250 + 200×1000 + 250×1000)

Rp = 52.17 Ω

The total current in the circuit, It = 6 A

From Ohm's Law;

V = IR,

where V is the voltage across each resistor

V1 = V2 = V3V = I×R

Therefore; V = I×Rp

The current flowing through the 200 Ω resistor, I1 = V1/200 = I × Rp/200The current flowing through the 200 Ω resistor, I1 = (6×52.17)/200I1 = 1.56 A

Thus, the current that flows through the 200 Ω resistor is 1.56 A.

To know more about Parallel current, refer here:

https://brainly.com/question/27986190#

#SPJ11

Answer:

The type of pressure that prevents a white dwarf from collapsing is the electron degeneracy pressure.

A white dwarf is a stellar remnant of a low or medium-mass star that has died, formed by a white dwarf supernova.

How does a white dwarf stay stable?

The white dwarf's stability is maintained by electron degeneracy pressure, which is the result of electrons being packed so tightly in the star's core that they are forced to behave like a gas, rather than a collection of individual particles.

The quantum mechanical Pauli exclusion principle governs the behavior of these electrons, which prohibits two fermions from occupying the same quantum state at the same time.

As a result, each electron is forced into a higher-energy state, resulting in a pressure that resists gravitational compression.

Therefore, the type of pressure that prevents a white dwarf from collapsing is the electron degeneracy pressure.

To know more about white dwarf:

https://brainly.com/question/14034412?

#SPJ11

Two forces act on a monkey hanging stationary by a vertical vine: gravity and the tension of the vine. Gravity is the greater force in this situation because it is a constant force that acts downwards.

The two forces that act on a monkey hanging stationary by a vertical vine are tension and gravity. The tension force acts along the vine and pulls the monkey upwards, while the gravity force acts downwards towards the center of the Earth.
If the monkey is stationary, then the two forces are equal in magnitude and opposite in direction. This is because the tension force is balancing the gravity force, resulting in no net force acting on the monkey.

Therefore, if neither of the forces are greater than the other as they are equal in magnitude and opposite in direction.What is tension force?The force exerted by a string, rope, chain, or similar object on another object that it is connected to is referred to as tension. The tension is always directed along the length of the string and away from the object's surface that the string is attached to. When an object is suspended from a rope, the tension force on the rope is equal to the weight of the object (due to gravity), and this tension force is transmitted through the rope to any other objects that the rope is attached to.

For more details about gravity, click on the below link:

https://brainly.com/question/13634821

#SPJ11

The net work (W) done on the particle by the external forces during its motion can be expressed in terms of the initial (Ki) and final (Kf) kinetic energies as: [tex]W = ((1/2) \times m \times  vf^2) - ((1/2) \times  m \times  vi^2)[/tex]

To find the net work (W) done on the particle by the external forces during the particle's motion in terms of the initial (Ki) and final (Kf) kinetic energies, we will use the work-energy theorem. The work-energy theorem states that the net work done on an object is equal to the change in its kinetic energy.

Step 1: Calculate the initial kinetic energy (Ki) and final kinetic energy (Kf).
Ki = (1/2) * m * vi²
Kf = (1/2) * m * vf²

Step 2: Calculate the change in kinetic energy (ΔK) as the difference between Kf and Ki.
ΔK = Kf - Ki

Step 3: According to the work-energy theorem, the net work (W) done on the particle by the external forces during its motion is equal to the change in kinetic energy (ΔK).
W = ΔK

Step 4: Substitute the expressions for Ki and Kf from step 1 into the equation for W from step 3.
W = ((1/2) * m * vf²) - ((1/2) * m * vi²)

In conclusion, the net work (W) done on the particle by the external forces during its motion can be expressed in terms of the initial (Ki) and final (Kf) kinetic energies as:  W = ((1/2) * m * vf²) - ((1/2) * m * vi²)

To know more about work refer here:

https://brainly.com/question/31050706#

#SPJ11

Complete Question:

Find the net work W done on the particle by the external forces during the motion of the particle in terms of the initial and final kinetic energies. Express your answer in terms of Ki and Kf. Work done on the particle by the external forces during the particle's motion. To understand the meaning and possible applications of the work-energy theorem. In this problem, you will use your prior knowledge to derive one of the most important relationships in mechanics: the work-energy theorem. We will start with a special case: a particle of mass m moving in the x direction at constant acceleration a . During a certain interval of time, the particle accelerates from vi to vf, undergoing displacement is given by s=xf −xi.

The waves will cancel each other out and no waves will remain. If two waves of the same frequency, but different amplitudes, interfere with each other, the resulting wave will have an amplitude equal to the sum of the two wave amplitudes.

Pulse waves are pressure waves that are created as the heart pumps blood throughout the body. They are detected through pulse points, such as on the wrists, neck, or temples. Pulse waves can be measured using a device called a pulse oximeter, which uses a sensor to detect the pressure of the pulse wave.

Pulse waves can provide information about a person’s heart rate and oxygen saturation levels.

Learn more about pulse waves here:

https://brainly.com/question/26701631
#SPJ1