Answer:
[tex]F_2=1.3\times 10^{-7}\ N[/tex]
Explanation:
Given that,
Initial force, [tex]F=5.2\times 10^{-7}\ N[/tex]
distance, d = 2 m
New distance, d' = 4 m
We need to find the new force. The electrostatic force between two charges is given by :
[tex]F=k\dfrac{q_1q_2}{d^2}[/tex]
So,
[tex]\dfrac{F_1}{F_2}=(\dfrac{d_2}{d_1})^2\\\\\dfrac{F_1}{F_2}=(\dfrac{4}{2})^2\\\\\dfrac{F_1}{F_2}=4\\\\F_2=\dfrac{F_1}{4}\\\\F_2=\dfrac{5.2\times 10^{-7}}{4}\\\\F_2=1.3\times 10^{-7}\ N[/tex]
So, the new force is equal to [tex]1.3\times 10^{-7}\ N[/tex].
A freight train car is moving at a constant speed with respect to the ground of Vcg. A man standing on a flatbed car throws a ball into the air and catches it as it falls. Relative to the flatbed car, the initial velocity of the ball is Vibc straight up. a. What are the magnitude and direction of the initial velocity of the ball as seen by a second man standing on the ground next to the track
Answer:
chiicken
Explanation:
Use the simulation to determine the relationship between the distance from the magnet and the strength of the magnetic field at that point. Use a ruler to measure distance on the screen. Use a power fit to determine the B vs. r relationship for each location. To simplify your data collection, chose a data-collection axis where either Bx or By = 0. Measure the distance from the nearest edge of the magnet. You will need to obtain a ruler for collecting data.
Explanation:
give me more detail and i well help you out
A child with a mass of 12.32kg weight how much? Show all work including a equation
Answer:
123.2newtons
Explanation:
weight =mass × gravity
w= m×g
gravitational pull is approximately 10N/Kg
w= 12.32kg×10n/kg
=123.2newtons or 12.3N
A cylinder of gas has a frictionless but tightly sealed piston of mass M. A small flame heats the cylinder, causing the piston to slowly move upward. For the gas inside the cylinder, what kind of process is this?
Answer:
isobaric
Explanation:
According to the attached figure, the process would be isobaric as the gas would be expanded at the time when it maintains the constant pressure
The ideal gas law derives
PV = nRT
As the flame is there at the bottom side so atoms or molecules of gas would get heat up slowly also their temperature would be increased. Thus in the case when piston would not be permitted to move so the pressure would rise having maintaining the constant volume and after this the process could be isochronic but in the given case, the piston would be permitted to move slowly upward so that there is a rise in the volume. However, the gas particles would be adjust themselves in order to maintain constant pressure so the given process represent isobaric
what is the process that creates wind.
Answer:
Winds are caused by differences in air pressure. Unequal heating of Earth’s surface creates areas of different pressure. Cooler areas have higher air pressure. Warmer areas have lower pressure. This causes air to move from high pressure to low pressure. This movement is the wind we feel.
plz mark me as brainliest.
238 U
92 ———————>
The alpha decay of ___ produces an atom with a mass number of...
OA. 234
B. 236
C. 238
D. 240
Answer:
A. 234
Explanation:
An alpha particle is a Helium atom which has a mass number of 4 and atomic number of 2. So, an alpha particle decay cause the mass number to decrease by 4 units.
So 238 - 4 = 234
The answer is A
What is the frequency of a wave traveling at 300,000,000 m/s with a wavelength of .0025 m/cycle ? Please explain good thank you
Answer:
The frecuency is 1.2*10¹¹ Hz.
Explanation:
Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).
Frequency is the number of vibrations that occur in a unit of time, that is, how many peaks or valleys are repeated in a unit of time. Its unit is s – 1 or hertz (Hz).
The propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave disturbance propagates along its displacement. It relates the wavelength (λ) and the frequency (f) inversely proportional using the following equation:
v = f * λ.
In this case:
v= 300,000,000 m/sf= ?λ= 0.0025 mReplacing:
300,000,000 m/s= f* 0.0025 m
Solving:
f= 300,000,000 m/s ÷0.0025 m
f= 1.2*10¹¹ [tex]\frac{1}{s}[/tex] = 1.2*10¹¹ Hz
The frecuency is 1.2*10¹¹ Hz.
If the time period of simple pendulum is doubled then it's amplitude will be
Also explain the answer
Answer:
pls check
https://www.doubtnut.com/question-answer-physics/the-amplitude-of-a-simple-harmonic-oscillation-is-doubled-how-does-this-affect-i-periodic-time-ii-ma-12009541
In an electrical circuit, electrons move from the __________.
A. Negative pole to negative pole B. Negative pole to positive pole
C. Positive pole to positive pole
Answer:
the answer is B from negative pole to positive pole
A glass bottle of soda is sealed with a screw cap. The absolute pressure of the carbon dioxide inside the bottle is 1.50 x 105 Pa. Assuming that the top and bottom surfaces of the cap each have an area of 4.40 x 10-4 m2, obtain the magnitude of the force that the screw thread exerts on the cap in order to keep it on the bottle. The air pressure outside the bottle is one atmosphere
Answer:
[tex]F \approx 19.5 N[/tex]
Explanation:
From the question we are told that:
Pressure of [tex]P_{CO_2}=1.50 * 105 Pa.[/tex]
Bottle cap area [tex]A_b= 4.40 * 10-4 m^2[/tex]
Generally the equation for Resultant pressure [tex]P_r[/tex] is give as is mathematically given by
[tex]P_r=P_{CO_2}-P_a[/tex]
Where
[tex]P_a=atmospheric\ pressure = 1.013*10^5 pa[/tex]
[tex]P_r=1.50 * 105 Pa-1.013*10^5 pa[/tex]
[tex]P_r=0.487*10^5 pa[/tex]
Generally the equation for Force exerted by screw F is give as is mathematically given by
[tex]F = P*A\\F = 0.487*10^5*4.00*10^-4\\ F = 19.48 N[/tex]
[tex]F \approx 19.5 N[/tex]
What is responsible for the amount of current in a circuit?
Will mark as Brainliest!!!
Answer:
Voltage is required for there to be a current but resistance can effect the amount of current.
Answer:
the answer is voltage
Explanation:
we just finished this unit in class
A 1 kg block of wood is attached to a spring, of force constant 200 N/m, which is attached to an immovable support. The block rests on a frictional surface with a coefficient of kinetic friction of 0.2. A 20 g bullet is fired into the block horizontally compressing the spring a maximum distance of 15 cm. Find the original velocity of the bullet before the collision.
Answer:
[tex]v=15.9499m/s[/tex]
Explanation:
From the question we are told that:
Mass of wood [tex]m=1kg[/tex]
force constants [tex]k= 200N-m[/tex]
Coefficient of kinetic friction [tex]\mu= 0.2[/tex]
Bullet mass [tex]m_b= 20 \approx 0.02kg[/tex]
Spring compresion [tex]y=15cm \approx 0.15 m[/tex]
Generally the equation for kinetic energy of bullet [tex]K>E_b[/tex] is mathematically given by
Complete Question
[tex]K.E_b=spring potential energy+work done against friction[/tex]
[tex]K.E_b=\frac{1}{2} mbv^2[/tex]
[tex]\frac{1}{2} m_b v^2=\frac{1}{2} ky^2+\mu my[/tex]
[tex]\frac{1}{2} (0.02)v^2=\frac{1}{2} (0.2)(0.15)^2+0.2(1)(0.15)[/tex]
[tex]v=15.9499m/s[/tex]
[tex]v\approx16m/s[/tex]
A child is pushing a merry-go-round. The angle through which the merry-go-round has turned varies with time according to θ(t)=γt+βt3θ(t)=γt+βt3, where γ=γ= 0.450 rad/srad/s and β=β= 1.10×10−2 rad/s3rad/s3. Part A Calculate the angular velocity of the merry-go-round as a function of time. Express your answer in terms of the variables ββ, γγ, and tt. ωz(t)ωz(t) = nothing rad/srad/s SubmitRequest Answer Part B What is the initial value of the angular velocity? ωzωz = nothing rad/srad/s SubmitRequest Answer Part C Calculate the instantaneous value of the angular velocity ωzωz at t=t= 5.25 ss . ωzωz = nothing rad/srad/s SubmitRequest Answer Part D Calculate the average angular velocity ωav−zωav−z for the time interval t=0t=0 to t=t= 5.25 ss .
Answer:
hufiui
fihgpfghlfikgergkfkjhfkhjgkffhhh
Explanation:
jjgzgcjxhgygueyuufhfugkhkckgijljhgxjgjgffhgkgjxhxjgjcjckvjgghkhkgjgjfhfhfhffrusufsflslrsyfhldufñlñudtoqdyhjjxkgsgjfktwlyfñujxjxhlxlhdktstedoyñfuyñflldytidoyeyljjcñcjluffñui5woyepurñfuñufldyrajuñdlydstdyñudñydktshñxjcñydiw5uñfitwoyeoyeñufñfuñifjñufhlsyñeifññydoysitaiwtuñdyñdlsyltslsyoyeylsuñdñjjcyldlyslatlysñudidñjdñfjñjjxlhsmzhmzjjdjdlhdñhjdñjdñjddñhflhuñfhxltkds4urayraylraluarularuñstuñtsuñtsultsuñtsuñstñitsñktssistustlulsrustlularyralultalutslutajltsñgskjlgzljg?g o uguhxputxipyfugxiñhxiñhfuñdguldthgksjmgdjmgkhdjlgdjlgd
pduoyditsyafylrayoraourauptautospustistiptsñitsñitsñitsiptsiteitdustuñtsuñtsñitwiñstñitwñitsñstuuñrsoursurosoustjlsrlutejlgsjlstjfsjlgsultsjgzjñgsññkdylfhkñdgjlfshkadmjgsuñstñkydñkydñiykdhiñstñitsuñtsisñtñtieñietñietñiteñiwtñitskñgsiñteuñwrkñsturaluglsuñtwjlfalfjalhadoyfutdllgdñitswtkgsñktjrajtsurwñwñutiñtsiwñtuwñturqlñitwualtayoryarluarlietite
PLEASE HELP! I'LL GIVE BRAINLEST
the answer is the first one
How far are two protons if they exert a force of 0.5 N on one another?
Answer:
5.08 metres
Explanation:
The both protons should be 5.08 meters apart so that force between them is equal to the weight of electron
The two protons will exert a repulsive force of 0.5 N when they are at a distance of [tex]2.146625 \times10^{-14} \,m[/tex] away from each other.
As protons have very little mass the gravitational force will be negligible. So here we will consider the electrostatic force between them.
According to Coulomb's law in electrostatics, the electrostatic force between two charges can be given by;[tex]F=k\frac{q_{1}q_{2} }{r^2}[/tex]Where [tex]k \approx 9 \times 10^9 \, Nm^2 /C^2[/tex]Here, since both the particles are protons;[tex]q_1 = q_2 = 1.6 \times 10^{-19}\,C[/tex]Given that F = 0.5 NSubstituting the known values in the Coulomb's law equation, we get;[tex]0.5\, N = 9\times 10^{9} Nm^2 /C^2 \times\frac{(1.6\times 10^{-19}\,C)\times(1.6\times 10^{-19}\,C)}{r^2}[/tex]
ie; [tex]r= \sqrt{9\times 10^{9} Nm^2 /C^2 \times\frac{(1.6\times 10^{-19}\,C)\times(1.6\times 10^{-19}\,C)}{0.5\, N} } = 2.146625 \times 10^{-14}\,m[/tex]
Learn more about Coulomb's Law here:
https://brainly.com/question/1698562
Electric current is a measure of
Group of answer choices
a. the amount of resistance provided by the circuit.
b. the amount of electric charge that passes within a certain amount of time.
c. the amount of electric potential an electron gains passing through a battery
d. the amount of protons that pass through a resistor.
Answer:
b. the amount of electric charge that passes within a certain amount of time
Answer:
The answer is B which is the amount of electric charge that passes within a certain amount of time in my opinion.
can someone help? NO LINKS OR IM REPORTING
Answer:
BjsjsjsiisudujdgjkkgywuuuyyyuwuA ball weighing 100 g is attached to a string and swung around with a speed of 2 m/s. If the centripetal force exerted by the string is
0.5 N, what is the length of the string?
A) 0.08 m
B) 0.8 cm
C) 8 m
D) 80 cm
Assuming the ball is swung around in a circle parallel to the ground, it has a centripetal acceleration a of
a = v ² / R
where v is the tangential speed of the ball and R is the length of the string.
The tension in the string is 0.5 N, so by Newton's second law, the ball has acceleration
F = m a → a = F / m = (0.5 N) / (0.1 kg) = 5 m/s²
where m is the ball's mass.
Solve for R :
a = v ² / R → R = v ² / a = (2 m/s)² / (5 m/s²) = 0.8 m = 80 cm
[TG.05H]A geothermal plant has been built in a location. Which of these is the most likely impact of the plant on the location?
depletion of fossil fuels like coal
damage to hot springs and geysers
decrease in average annual temperature
increase in emission of greenhouse gases
The environmental impact that is most likely to occur in an area where there is a geothermal plant is decrease in average annual temperature.
What is a geothermal plant?A geothermal plant makes use of both heat and water in the generation of electricity.
The environmental impact that is most likely to occur in an area where there is a geothermal plant is decrease in average annual temperature.
Learn more about geothermal plant:https://brainly.com/question/27442707
#SPJ2
A proton moves with a speed of 1.00 x 106 m/s perpendicular to a magnetic field, B. As a result, the proton moves in circle of radius 20.0 m. If an electron were moving at the same speed perpendicular to the same magnetic field, what would be the radius of the circle the electron would move in
Answer:
0.0109 m ≈ 10.9 mm
Explanation:
proton speed = 1 * 10^6 m/s
radius in which the proton moves = 20 m
determine the radius of the circle in which an electron would move
we will apply the formula for calculating the centripetal force for both proton and electron ( Lorentz force formula)
For proton :
Mp*V^2 / rp = qp *VB ∴ rp = Mp*V / qP*B ---------- ( 1 )
For electron:
re = Me*V/ qE * B -------- ( 2 )
Next: take the ratio of equations 1 and 2
re / rp = Me / Mp ( note: qE = qP = 1.6 * 10^-19 C )
∴ re ( radius of the electron orbit )
= ( Me / Mp ) rp
= ( 9.1 * 10^-31 / 1.67 * 10^-27 ) 20
= ( 5.45 * 10^-4 ) * 20
= 0.0109 m ≈ 10.9 mm
5. A cart with one fan on It blowing to the left and carrying one block produces the x vs t graph shown If this car were carrying three blocks instead of one, with the
fan still blowing the same direction, what could the x vs t graph look like?
A Graph A
B. Graph B
OC. Graph C
O D. Graph D
Answer:
Graph C
Explanation:
With the same force and more mass, the position in time will still be parabolic
i.e. x = ½at², but the rate of acceleration will be lower so the position curve will be broader.
Two small metallic spheres with equal mass are suspended as pendulums by strings of length L. The sphereshave the same electric charge and come to equilibrium with each string at an angle of Θ = 10.00° with the vertical. What happens if the electric charges are decreased?
A) Θ decrease
B) Θ increase
C) Θ remains the same
D) distant between spheres increases
Answer:
Two small metallic spheres with equal mass are suspended as pendulums by strings of length L. The sphereshave the same electric charge and come to equilibrium with each string at an angle of Θ = 10.00° with the vertical. What happens if the electric charges are decreased?(D)
Explanation:
please click the heart and rate excellent and brainleist to ❤☺️☻♨️♨️☻☺️❤
Two children are sitting on a see-saw, as shown. Calculate the distance the 500-N chid should sit from the fulcrum (pivot) to balance the sew-saw.
We have that for the Question "Calculate the distance the 500-N chid should sit from the fulcrum (pivot) to balance the sew-saw"
It can be said that
The distance = [tex]1.8m[/tex]From the question we are told
weights are = 300 N and 500 N
length l = 6 m
take x distance from the 300 N
total torque is zero
[tex]300*3 = 500x\\\\x = 1.8 m[/tex]
For more information on this visit
https://brainly.com/question/23379286
A disk has 128 tracks of 32 sectors each, on each surface of eight platters. The disk spins at 3600 RPM and takes 15 ms to move between adjacent tracks. What is the longest time needed to read an arbitrary sector located anywhere on the disk
Answer:
the longest time needed to read an arbitrary sector located anywhere on the disk is 2971.24 ms
Explanation:
Given the data in the question;
first we determine the rotational latency
Rotational latency = 60/(3600×2) = 0.008333 s = 8.33 ms
To get the longest time, lets assume the sector will be found at the last track.
hence we will access all the track, meaning that 127 transitions will be done;
so the track changing time = 127 × 15 = 1905 ms
also, we will look for the sectors, for every track rotations that will be done;
128 × 8.33 = 1066.24 ms
∴The Total Time = 1066.24 ms + 1905 ms
Total Time = 2971.24 ms
Therefore, the longest time needed to read an arbitrary sector located anywhere on the disk is 2971.24 ms
When turning from your path onto a perpendicular path your speed
SHOULD BE at a STEADY
DRIVERS ED PLEASE HELP
Answer: 5-15MPH
Explanation: Trust me
The data points you have taken on your lab graphs roughly form a straight line. How do you interpret the slope of this line?
Steeper slopes mean higher speeds.
Steeper slopes mean lower speeds.
Steeper slopes mean higher error.
Steeper slopes mean lower error.
The slope has no relation to speed or error
Answer: Steeper slopes mean lower speeds.
Explanation:
Three points A, B and C are located along a horizontal line. A positive test charge is released from rest at C and accelerates towards B. Upon reaching B, the test charge continues to accelerate toward A. Assuming that only motion along the line is possible,
a) Which point has the highest potential; A, B or C?
b) What will a negative test charge do when it is released from rest at B?
A rock falls from a cliff and hits the ground at a velocity of 28m/s. How long did it take to fall?
Answer:
2.8s
Explanation:
=>a = v-u/t
=> t = v - u / t
= 28-0 / 10
= 2.8 s
Suppose that the collector is held at a small negative voltage with respect to the grid. Will the accelerated electrons reach the collecting plate?
A) Yes, but only those electrons with energy less than the potential difference established between the grid and the collector will reach the collector.
B) Yes, but only those electrons with energy greater than the potential difference established between the grid and the collector will reach the collector.
C) Yes; all the accelerated electrons will reach the collector.
D) No, none of the electrons will reach the collector
Answer:
B) Yes, but only those electrons with energy greater than the potential difference established between the grid and the collector will reach the collector.
Explanation:
In the case when the collector would held at a negative voltage i.e. small with regard to grid So yes the accelerated electrons would be reach to the collecting plate as the kinetic energy would be more than the potential energy that because of negative potential
so according to the given situation, the option b is correct
And, the rest of the options are wrong
1.The focal length is equal to half of the …………….
a. c entre of curvature
b . The radius of Curvature
c. Axis
d. none of the above
2.The point on principal axis at which parallel rays; coming from infinity; converge after reflection is called the …………….
a. Principal Focus
b .Aperture
c .Principal Axis
d. focal length
3.Which of the following best describes the image formed by a plane mirror?
a .Virtual, inverted and magnified
b .Real, inverted and diminished
c. Virtual, erect and the same size as object
d. Real, erect and the same size as object
4.Which of the following best describes the image formed by a convex mirror?
a. Virtual, erect and magnified
Real, inverted and magnified
b .Virtual inverted and diminished
c. Virtual erect and diminished
5.The field of view is maximum for,
a .Plane mirror
b. Concave mirror
c. Convex mirror
d . .Cylindrical mirror
6.Which of the following best describes the image formed by a concave mirror when the object is located somewhere between the focal point (F) and the center of curvature (C) of the mirror?
a .Virtual, erect and magnified
b .Real, inverted and diminished
c .Virtual, erect and diminished
d .Real, inverted and magnified
7.If a man wishes to use a plane mirror on a wall to view both his head and his feet as he stands in front of the mirror, the required length of the mirror ____.
a .is equal to the height of the man.
b .is equal to one half the height of the man.
c. depends on the distance the man stands from the mirror.
d. depends on both the height of the man and the distance from the man to the mirror.
8.Which of the following statements are true of a virtual image?
a Virtual images are always located behind the mirror.
b .Virtual images can be either erect or inverted.
c. Virtual images can be magnified in size, reduced in size or the same size as the object.
d Virtual images can be formed by concave, convex and plane mirrors.
9.Virtual images are not real; thus, you could never see them when sighting in a mirror.
a.Virtual images result when the reflected light rays diverge.
b.Virtual images can be projected onto a sheet of paper.
10.Which of the following statements is/are true of a real image?
.Real images are always located behind the mirror.
a. Real images can be either erect or inverted.
b .Real images can be magnified in size, reduced in size or the same size as the object.
c .Real images can be formed by concave, convex and plane mirrors.
d. Real images are not virtual; thus, you could never see them when sighting in a mirror.
e Real images result when the reflected light rays diverge.
f. Real images can be projected onto a sheet of paper.
Answer:
Explanation:
1.The focal length is equal to half of the …………….
b . The radius of Curvature
2.The point on principal axis at which parallel rays; coming from infinity; converge after reflection is called the …………….
a. Principal Focus
3.Which of the following best describes the image formed by a plane mirror?
c. Virtual, erect and the same size as object
4.Which of the following best describes the image formed by a convex mirror?
a. Virtual, erect and magnified