Answer:
technetium, atomic number 43; promethium, number 61; astatine, number 85; francium, number 87; neptunium, number 93; and plutonium, number 94.
Explanation:
How many atoms in total are present in sucrose C12H2011 weighs 1.4 mg
Answer:
2.46×10²¹atoms
Explanation:
[tex]molar \: mass \: of \: the \: sucrose = 12(12) + 22(1) + 11(16) \\ = 144 + 22 + 176 \\ = 342g {mol}^{ - 1} \\ mole = \frac{1.4 \times {10}^{ - 3} }{342} \\ = 4.09 \times {10}^{ - 6} \\ number \: of \: atoms = 4.09 \times {10}^{ - 6} \times 6.022 \times {10}^{23} \\ = 2.46 \times {10}^{21} atoms[/tex]
I Need help with this worksheet I Need the Work Please Thank you
1. a. 3
b. 2
2. a. 4
b. 6
3. a. 1
b. 2
4. a. 5
Anyone know this? Cuz I don’t this one is
Answer:
its legislative.
Pregnant women are often cautioned against cleaning cat litter boxes. This is because Toxoplasma, an intestinal parasite of cats, can be transmitted from infected feces to the expectant mother and ultimately to the fetus. For these reasons, Toxoplasma is considered
....
a noninfectious disease.
a communicable disease.
an addictive disease.
a nosocomial disease.
a zoonotic disease.
a necrotizing disease..
Answer:
A communicable disease
Explanation:
Diseases that can be transferred are known as communicable diseases.
At body temperature, 2404 J is required to evaporate 1 g of water. After vigorous exercise, a person feels chilly because the body is giving up heat to evaporate perspiration. A typical person perspires 25 mL of water after 20 minutes of exercise. How much body heat is used to evaporate this water
Answer: - 1.45 kJ
Explanation:
Using q = m x C x (ΔT)
Given : m = 3.8 g , C = 0.900 J/g°C, = -(450-25)°C = -425°C (Since final temperature is less than the initial, the sign is negative)
q = (3.8 g) x (0.900 J/goC) x ( -425 °C)
= -1453.5 J
= -1.45 kJ
Note that negative sign of q indicates that this much heat is released, when the metal cools down.
The parmo is a dish made from breaded meat and cheese sauce that originated in which english town?.
Answer:
Middlesbrough, North Yorkshire
,,Explanation:
help help help help help
Answer:
It's C.
Explanation:
According to the site, "http://needtoknow.nas.edu/energy/energy-sources/renewable-sources/wind/" ... "Wind energy is an indirect form of solar energy created by a combination of factors, including the uneven heating of Earth’s atmosphere by solar radiation, variations in topography, and the rotation of Earth. People have been putting wind energy to use throughout history to propel sail boats, mill flour from grain, and pump water."
help please giving brainliest!
Answer:
a reaction that can occur in both forward and reverse directions at the same time.
Explanation:
This is because ↓
A reversible reaction is a reaction in which the conversion of reactants to products and the conversion of products to reactants occur simultaneously. A and B can react to form C and D or, in the reverse reaction, C and D can react to form A and B.
Hope this helps =)
ANSWER FAST PLS ILL GIVE BRAINLY 5. What are animals called that make their homes underground?
grazers
reptiles
burrowers
meat-eaters
Answer:
burrowers
Explanation:
HELP ANYONE PLEASE ASAP TYY!!!
I rounded the answer but can you help me?
Jin listed some common thermal insulators and conductors in a chart. (attached below)
Which belongs in the area marked with an X?
A.) Iron
B.) Foam
C.) Wood
D.) Glass
Have a great rest of your day
#TheWizzer
Answer:
I would have to say the answer is A) iron. I say this because Iron is one of the most well know conductors and in the chart it as rubber and copper as the two conductors whole Air and Iron should be the x. Plus the rest don't make good conductors they are more insulators. So logicaly it wouldn't make sense to have any of the other answers.
Explanation:
Hope This Helps
Have A Great Day
~Zero~
According to the concept of conduction, iron belongs in the area marked with an X.
What is conduction?Conduction is defined as a process as a means of which heat is transferred from the hotter end of the body to it's cooler end.Heat flows spontaneously from a body which is hot to a body which is cold.
In the process of conduction,heat flow is within the body and through itself.In solids the conduction of heat is due to the vibrations and collisions of molecules while in liquids and gases it is due to the random motion of the molecules .
When conduction takes place, heat is usually transferred from one molecule to another as they are in direct contact with each other.There are 2 types of conduction:1) steady state conduction 2) transient conduction.According to the type of energy conduction is of three types:
1) heat conduction
2) electrical conduction
3)sound conduction
Learn more about conduction,here:
https://brainly.com/question/12136944
#SPJ7
Given the following equation: NaOH + HCl -> NaCl + H2O. Calculate the mass of water produced when 80.0 g of NaOH react with excess HCl.
Answer:
36 grams
Explanation:
Na 22.989
O 15.999
H 1.008 total 39.996 gm per mole
80 grams is 80 / 39.996 = ~ 2 moles
From the equation each mole of NaOH used results in ONE mole of H2O
so you will get two moles of H20
(1.008 *2 + 15.999) * 2 = ~ 36 gm
1. -A mixture of aluminum metal and chlorine gas reacts to form aluminum chloride (AlCl3): 2Al(s) +
3Cl2(g) → 2AlCl3(s). How many moles of aluminum chloride will form when 5 moles of chlorine gas react
with excess aluminum metal?
Answer:
3.33 moles
Explanation:
We know that our limiting reactant is chlorine so we just have to figure out how much of the product aluminum chloride (AlCl3) would be formed from 5 moles of chlorine gas. As we can see in the balanced equation, the mole ratio of chlorine gas (Cl2) to aluminum chloride is 3:2 based on the coefficients of the species. All you have to do from here is divide the amount of moles of chlorine gas by its own coefficient and then multiply the number you receive by the coefficient of AlCl3.
5/3=1.66
1.66*2=3.33
If 162.35 g aluminum hydroxide are dissolved in 6750 mL of solution, what is the concentration of the solution?
If 162.35 g aluminum hydroxide are dissolved in 6750 mL of solution, the concentration of the solution is 0.308M
How to calculate concentration?The concentration of a solution can be calculated using the following formula:
Molarity = no of moles ÷ volume (L)
However, the number of moles in 162.35g of Al(OH)3 must be calculated as follows:
Molar mass of Al(OH)3 = 78g/mol
no of moles = 162.35g ÷ 78mol
no of moles = 2.08mol
Molarity = 2.08mol ÷ 6.75L
Molarity = 0.308M
Therefore, if 162.35 g aluminum hydroxide are dissolved in 6750 mL of solution, the concentration of the solution is 0.308M.
Learn more about molarity at: https://brainly.com/question/2817451
A gas has a volume of 22. 6L at 3. 6 atm. What is the pressure of the gas at 44. 3L
Answer:
1.837 atm
Explanation:
According to Boyle's Law:
[tex]V_{1} P_{1} = V_{2}P_{2}[/tex]
(22.6L) (3.6atm) = (44.3L) (x)
x = 81.36 /44.3
x = 1.837 atm
This is because Volume and Pressure are inversely proportional. If one increases the other has to decrease.
What is the molarity of a solution consisting of 105 grams of calcium nitrate and 280. grams of water?
Answer:
About 2.29 M.
Explanation:
Recall that molarity is defined by moles of solute over liters of solution.
Our solute is 105 grams of calcium nitrate (Ca(NO₃)₂)).
Convert 105 grams of Ca(NO₃)₂ to moles. The molecular weight of Ca(NO₃)₂ is 164.10 g/mol:
[tex]\displaystyle 105\text{ g Ca(NO$_3$)$_2$}\cdot \frac{1\text{ mol Ca(NO$_3$)$_2$}}{164.10\text{ g Ca(NO$_3$)$_2$}} = 0.640\text{ mol Ca(NO$_3$)$_2$}}[/tex]
Convert 280. grams of water to liters. Recall that the density of water is given by 1.00 g/mL:
[tex]\displaystyle \begin{aligned} D & = \frac{m}{V} \\ \\ V & = \frac{m}{D} \\ \\ & = \frac{(280.\text{ g})}{\left(\dfrac{1.00\text{ g}}{1\text{ mL}}\right)} \\ \\ & = 280. \text{ mL}\cdot \frac{1\text{ L}}{1000\text{ mL}} = 0.280\text{ L soln.}\end{aligned}[/tex]
Hence, the molarity of the solution is:
[tex]\displaystyle \begin{aligned} \text{M} &= \frac{\text{ mols solute}}{\text{L soln.}} \\ \\ & = \frac{(0.640\text{ mol})}{(0.280\text{ L soln.})} \\ \\ & = 2.29\text{ M} \end{aligned}[/tex]
In conclusion, the solution is about 2.29 M.
which molecule can't be exist?
A)NCl3 B)OF6 C)ONF3 D)PCl3
Answer:
OF6
Explanation:
Oxygen and fluorine have almost the same electronegativity, so oxygen isn't able to donate enough electron density to fluorine to form OF6. Atomic size. There isn't enough room around an oxygen atom for six fluorine atoms.
:-befrank
QUESTION 4 An aqueous solution of 4 mol/L nitric acid is electrolyzed in an electrolytic cell using graphite electrodes.
a) Write the chemical symbols for all the ions present in the electrolytic cell. (1 mark]
b) Name the gas given off at the cathode. [1 mark]
c) Name the gas given off at the anode. [1 mark]
d) Write the half reaction equations at the;
i) Cathode : [1 mark)
ii) Anode : [1 mark]
e) The overall anode - cathode reaction equation taking place in the electrolytic cell. [1 mark]
The gas given off at the cathode is hydrogen while the gas given off at the anode is oxygen.
What is electrolysis?The term electrolysis has to do with the decomposition of a substance by the passage of direct current through it.
The ions present in the system are H^+, OH^- and NO3^- ions. The gas given off at the cathode is hydrogen while the gas given off at the anode is oxygen.
The half reaction equation of the reduction is;
2H^+(aq) + e ----->H2(g)
The oxidation half reaction equation is;
4OH^- (aq)------> 2H2O(l) + 4e
The overall equation is;
4H^+(aq) + 4OH^- (aq)------> 4H2(g) + 2H2O(l) + 4e
Learn more about electrolysis:https://brainly.com/question/12054569
#SPJ1
A solution was made using NaOH, the pH of the solution was found to be 11.452. What is the concentration of the hydroxide ion, OH^- in this solution
Answer:
i think it is 0.002831392
Explanation:
pOH = 14 - 11.452 = 2.548
pOH = -log(OH)
2.548 = -log(OH)
10^(-2548) = 0.002831392
Which is a warning sign that someone needs the help of a mental health professional?
A.
feeling shy when asked to walk onstage
B.
overeating to increase bodily strength
C.
inablity to sleep properly for weeks
Answer:
The answer is C. Inability to sleep properly for weeks.
Explanation:
This means that your mental health is going downhill because the lasck of sleep can drive you insane.
Hope This Helps!
-Justin:)
What amount of heat is required to increase the temperature of 75.0 g of water from 22.3˚C to 36.1˚C?
Answer:
4332.5 j
Explanation:
Specific heat of water is 4.186 j /g-C
4.186 j / g-C * 75 g * (36.1-22.3 C) =
what are the basic elements of environment
Answer:
the basic elements of environment are lithosphere, hydrosphere, atmosphere and biosphere.
Explanation:
A 240.0 gram piece of copper is dropped into 400.0 grams of water at 24.0 °C. If the final temperature of water is 42.0 °C, what was the initial temperature of the copper piece? (5 points)
Specific heat of copper = 0.39 J/g °C
Group of answer choices
322 °C
345 °C
356 °C
364 °C
The initial temperature of the copper piece if a 240.0 gram piece of copper is dropped into 400.0 grams of water at 24.0 °C is 345.5°C
How to calculate temperature?The initial temperature of the copper metal can be calculated using the following formula on calorimetry:
Q = mc∆T
mc∆T (water) = - mc∆T (metal)
Where;
m = massc = specific heat capacity∆T = change in temperatureAccording to this question, a 240.0 gram piece of copper is dropped into 400.0 grams of water at 24.0 °C. If the final temperature of water is 42.0 °C, the initial temperature of the copper is as follows:
400 × 4.18 × (42°C - 24°C) = 240 × 0.39 × (T - 24°C)
30,096 = 93.6T - 2246.4
93.6T = 32342.4
T = 345.5°C
Therefore, the initial temperature of the copper piece if a 240.0 gram piece of copper is dropped into 400.0 grams of water at 24.0 °C is 345.5°C.
Learn more about temperature at: https://brainly.com/question/15267055
Answer:
the correct answer is 364
q = m * c * ΔT
where q is the heat absorbed or released, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
We can assume that the heat lost by the copper is gained by the water, so:
q(copper) = -q(water)
where the negative sign indicates that the copper loses heat while the water gains heat.
The specific heat capacity of copper is 0.39 J/g °C, so:
q(copper) = 240.0 g * 0.39 J/g °C * (T(copper) - 24.0 °C)
The specific heat capacity of water is 4.18 J/g °C, so:
q(water) = 400.0 g * 4.18 J/g °C * (42.0 °C - T(copper))
Setting q(copper) equal to -q(water), we get:
240.0 g * 0.39 J/g °C * (T(copper) - 24.0 °C) = -400.0 g * 4.18 J/g °C * (T(copper) - 42.0 °C)
Simplifying and solving for T(copper), we get:
T(copper) = [(400.0 g * 4.18 J/g °C * 42.0 °C) + (240.0 g * 0.39 J/g °C * 24.0 °C)] / (240.0 g * 0.39 J/g °C + 400.0 g * 4.18 J/g °C)
T(copper) = 364.1 °C
Therefore, the initial temperature of the copper piece was 364.1 °C.
Hence, the answer is "364 °C".
ID: A
8. Gold is reacted with chlorine gas according to the reaction 2 Au + 3Cl2 → 2 AuClz. Use the data in the table
to determine the percent yield of gold chloride.
Mass of Gold
Mass of Chlorine Theoretical Yield Actual Yield
39.4 g
?
35.2 g
21.3 g
a. 60.7%
b. 54.1 %
c. 58.1 %
d. 51.4 %
9. How many moles of Al would be produced from 20 moles of AlO3?
A. The percentage yield of gold chloride is 58%
B. The number of mole of Al produced is 40 moles
A. How to determine the percentage of gold2Au + 3Cl₂ → 2AuCl₃
Molar mass of Au = 197 g/mol
Mass of Au from the balanced equation = 2 × 197 = 394 g
Molar mass of Cl₂ = 2 × 35.5 = 71 g/mol
Mass of Cl₂ from the balanced equation = 3 × 71 = 213 g
Molar mass of AuCl₃ = 197 + (3×35.5) = 303.5 g/mol
Mass of AuCl₃ from the balanced equation = 2 × 303.5 = 607 g
We'll begin by determining the limiting reactant
From the balanced equation above,
394 g of Au reacted with 213 g of Cl₂
Therefore,
39.4 g of Au will react with = (39.4 × 213) / 394 = 21.3 g of Cl₂
From the above, both Au and Cl₂ are limiting reactant.
Next, we shall determine the theoretical yield.
From the balanced equation above,
394 g of Au reacted to produce 607 g of AuCl₃
Therefore,
39.4 g of Au will react to produce = (39.4 × 607) / 394 = 60.7 g of AuCl₃
Thus, the theoretical yield of AuCl₃ is 60.7 g
Finally, we shall determine the percentage yield.
Actual yield = 35.2 g
Theoretical yield = 60.7 g
Percentage yield =?
Percentage yield = (Actual / Theoretical) × 100
Percentage yield = (35.2 / 60.7) × 100
Percentage yield = 57.99%
Percentage yield ≈ 58%
B. How to determine the mole of Al producedBalanced equation
2Al₂O₃ → 4Al + 3O₂
From the balanced equation above,
2 moles of Al₂O₃ produced 4 moles of Al
Therefore,
20 moles of Al₂O₃ will produce = (20 × 4) / 2 = 40 moles of Al
Thus, 40 moles of Al were obtained from the reaction.
Learn more about stoichiometry:
https://brainly.com/question/14735801
complete and balance the following equation b. na2 co3
the question isnt clear where are the products ir the reactants like __ = ___ + ___
What is the mass of one mole of silver?
Answer:107.868 grams
Explanation: I’m really sorry if it’s wrong:-(
Answer:
107.8682 grams
Explanation:
The molar mass of a substance is the mass in grams of one mole of that substance. This mass is given by the atomic weight of the chemical unit that makes up that substance in atomic mass units (amu). For example, silver has an atomic weight of 107.8682 amu, so one mole of silver has a mass of 107.8682 grams
What is the most significant solute in determining the distribution of water among fluid compartments
Answer:
Sodium (Na+)
Explanation:
Volume status is regulated through the monitoring of systemic solute per unit volume, or osmolarity. Sodium, the most prominent electrolyte 'solute' in extracellular fluid, is used to monitor extracellular osmolarity. A disproportionate loss of water relative to sodium results in a concentrating osmolar effect.
Sodium Hydroxide, which is a base, has a pH of _____
a
2
b
3
c
14
d
6
Answer:
c
Explanation:
Given that sodium hydroxide is a base, it's pH has to be above pH 7. Thus, option c is the correct option.
On the other hand, acids have a pH of lesser than 7 while pure water has a pH of 7. All the other options have a pH of less than 7, indicating that they are acids.
How does pathogen infection result in the occurrence of fevers in a host?
Edema caused by the pathogen raises the body temperature..
The pathogens break down the host's hypothalmus..
Pyrogens produced by the pathogen alter the host thermostat.
The interaction between PAMPs and PRPs causes a respiratory burst.
Answer:
The answer is Edema caused by the pathogen raises the body temperature. :)
Have an amazing day!!!
Please rate and mark brainliest!!