The Escobar family and the Johnson family each used their sprinklers last month. The water output rate forthe Escobar family's sprinkler was 20 gallons per hour. The water output rate for the Johnson family's sprinkler was40 gallons per hour. The families used their sprinklers for a combined total of 32 hours, resulting in a total wateroutput of 960 gallons. How many hours was each family’s sprinkler used?

Answer:

[tex]cos57 = 0.5446[/tex]

[tex]sin57 = 0.8387[/tex]

[tex]tan57 = 1.5399[/tex]

Step-by-step explanation:

Given

[tex]cos 94\° cos 37\° + sin 94\° sin 37\°[/tex]

Required

Determine the

- sin

- cosine

- tangent

of an angle

The given expression can be represented as follows;

[tex]cosAcosB + sinAsinB[/tex]

Where A = 94 and B = 37

In trigonometry:

[tex]cosAcosB + sinAsinB = cos(A - B)[/tex]

Substitute 94 for A and 37 for B

[tex]cos(A - B) = cos(94 - 37)[/tex]

[tex]cos(A - B) = cos(57)[/tex]

Hence, the angle is 57;

Since 57 is not a special angle; I'll solve using a calculator

[tex]cos57 = 0.5446[/tex]

[tex]sin57 = 0.8387[/tex]

[tex]tan57 = 1.5399[/tex]

Answer:

-38

Step-by-step explanation:

it's subtracting 7 everytime, and -31-7=-38

Answer: THe slope is 2

SO answer d

Step-by-step explanation:

-4X + 2Y = 16 add 4x to the other side so equation is

2y=16+4x divided by 2

y=8+2x

Answer:

You'll need 2.8 gallons of the 80% solution.

Step-by-step explanation:

Let the volume of 30% alcohol =x gallons

Then the volume of 80% alcohol =(14-x) gallons

Since we want to obtain a 40% alcohol solution, we have:

0.3x+0.8(14-x)=0.4(14)

0.3x+11.2-0.8x=5.6

0.8x-0.3x=11.2-5.6

0.5x=5.6

x=11.2

Therefore, the volume of 80% alcohol

=14-11.2

=2.8 gallons

You'll need 2.8 gallons of the 80% solution.

Answer:

hundreths

Step-by-step explanation:

After the decimal there is tenths, hundreths thousandnths, tens of thousands e.t.c

Answer:

Hello! The answer will be hundredths.

Step-by-step explanation:

The 5 means the thousandths.

The 0 means the hundredths.

The 8 means the tenths.

The 7 means the ones

And the 6 means the tens.

Hope this helps! :)

( below I attached a picture, which might be helpful.)

Answer:

9 and 18

Step-by-step explanation:

2x and x are the numbers

1/x-1/2x=1/18

2/2x-1/2x=1/18

1/2x=1/18

2x=18X=9,

2x=18

The two integers are 9 and 18

Answer: a) 0.8708, b) 5714, c) 0.000, d) 0.3830

Step-by-step explanation:

(a)

To find P(Z>-1.13):

Since Z is negative, it lies on left hand side of mid value.

Table of Area Under the Standard Normal Curve gives area = 0.3708

So,

P(Z>-1.13) = 0.5 + 0.3708 = 0.8708

(b)

To find P(Z<0.18):

Since Z is positive, it lies on right hand side of mid value.

Table of Area Under the Standard Normal Curve gives area = 0.0714

So,

P(Z<0.18) = 0.5 + 0.0714 = 0.5714

(c)

To find P(Z>8):

Since Z is positive, it lies on right hand side of mid value.

Table of Area Under the Standard Normal Curve gives area = 0.5 nearly

So,

P(Z>8) = 0.5 - 0.5 nearly = 0.0000  

(d)

To find P(| Z | < 0.5)

that is

To find P(-0.5 < Z < 0.5):

Case 1: For Z from - 0.5 to mid value:

Table of Area Under the Standard Normal Curve gives area = 0.1915

Case 2: For Z from mid value to 0.5:

Table of Area Under the Standard Normal Curve gives area = 0.1915

So,

P(| Z | < 0.5) = 2 * 0.1915 = 0.3830

The Probability can be determine using z-Table. The z- table use to determine the area under the standard normal curve for any value between the mean (zero) and any z-score.

(a) The value of [tex]P(z>-1.13)=0.8708[/tex].

(b) The value of  [tex]P(Z < 0.18) = 0.5714[/tex].

(c) The value of [tex]P(Z > 8) = 0.0000[/tex].

(d) The value of [tex]P(| Z | < 0.5) =0.3830[/tex].

Given:

The given condition is [tex]Z\sim N(\mu= 0,\sigma = 1).[/tex]

(a)

Find the value for [tex]P(Z > -1.13)[/tex].

Here Z is less than 1 that means Z is negative. So it will lies it lies on left hand side of mid value.

Refer the table of Area Under the Standard Normal Curve.

[tex]\rm Area = 0.3708[/tex].

Now,

[tex]P(Z > -1.13)=0.5 + 0.3708 = 0.8708[/tex]

Thus, the value of [tex]P(z>-1.13)=0.8708[/tex].

(b)

Find the value for [tex]P(Z < 0.18)[/tex].

Here Z is positive. So it will lies it lies on right hand side of mid value.

Refer the table of Area Under the Standard Normal Curve.

[tex]\rm Area = 0.0714[/tex].

Now,

[tex]P(Z <0.18)=0.5 + 0.0714 = 0.5714[/tex]

Thus, the value of  [tex]P(Z < 0.18) = 0.5714[/tex].

(c)

Find the value for [tex]P(Z >8)[/tex].

Here Z is positive. So it will lies it lies on right hand side of mid value.

Refer the table of Area Under the Standard Normal Curve.

[tex]\rm Area \approx 0.5[/tex].

Now,

[tex]P(Z >8)\approx0.5 - 0.5 = 0.0000[/tex]

Thus, the value of [tex]P(Z > 8) = 0.0000[/tex].

(d)

Find the value for [tex]P(|Z| <0.05)[/tex].

Here Z is mod of Z, it may be positive or negative. Consider the negative value of Z.

Refer the table of Area Under the Standard Normal Curve.

[tex]\rm Area =0.1915[/tex].

Consider the positive  value of Z.

Refer the table of Area Under the Standard Normal Curve.

[tex]\rm Area =0.1915[/tex].

Now,

[tex]P(|Z| <0.5)=2\times 0.1915 = 0.3830[/tex]

Thus, the value of [tex]P(| Z | < 0.5) =0.3830[/tex].

Learn more about z-table here:

https://brainly.com/question/16051105

Answer:

Let E be the event that the first marble selected is green. Let F be the event that the second marble selected is green. A box contains 20 blue marbles, 16 green marbles and 14 red marbles P(F/E)=15/49 because if the first marble selected is green there are 49 in total and 15 are green. I think this is it.

Step-by-step explanation:

Answer:

Step-by-step explanation:

Given a sample of seven admission test scores for a professional school listed 11.3, 10.6, 11.7, 9.7, 11.7, 9.5 and 11.7, the mean of the numbers is the sum total of the values divided by the total number of admission test score. The mean is as calculated below.

Mean = {11.3 + 10.6 + 11.7 + 9.7 + 11.7 + 9.5 + 11.7}/7

Mean = 76.2/7

Mean = 10.9

The mean score is 10.9 to 1 decimal place.

Note that the mean does not represent the centre of the data. It represents the average value of the datas. The mean does not represent the center because it is not a data value. The mean will give a value that is different from the values given in the data.

b) The median score is the score in the centre after re-arrangement. The arrangement can either be ascending or descending order. On re-arranging in ascending order;

9.5, 9.7, 10.6, (11.3), 11.7, 11.7, 11.7

After rearranging, it can be seen that the number at the centre of the data is 11.3, hence the median score is 11.3.

The median represents the center

c) The mode is the scores that occurs most. According to the data given, the score that occur most is 11.7. The score occurs the highest number of times (3 times) compare to other scores in the data. Hence, the modal score is 11.7.

The mode(s) does (do) not represent the center because it (one) is the largest data value.

Complete Question

Trade associations, such as the United Dairy Farmers Association, frequently conduct surveys to identify characteristics of their membership. If this organization conducted a survey to estimate the annual per-capital consumption of milk and wanted to be 95% confident that the estimate was no more than 0.5 gallon away from the actual average, what sample size is needed? Past data have indicated that the standard deviation of consumption of approximately 10 gallons.

Answer:

The  sample size is  [tex]n = 1537 \ gallons[/tex]

Step-by-step explanation:

From the question we are told that

    The margin of error is  [tex]MOE = 0.5[/tex]

     The confidence level is  [tex]C = 95[/tex]%

Given that the confidence level is  95% the level of significance is mathematically represented as

         [tex]\alpha = 100 - 95[/tex]

         [tex]\alpha = 5[/tex]%

         [tex]\alpha = 0.05[/tex]

Next we obtain the critical value of  [tex]\frac{\alpha }{2}[/tex] from the normal distribution table , the values is  [tex]Z_{\frac{\alpha }{2} } = 1. 96[/tex]

The reason we are obtaining critical values of  

[tex]\frac{\alpha }{2}[/tex]

instead of  

[tex]\alpha[/tex]

is because  

[tex]\alpha[/tex]

represents the area under the normal curve where the confidence level interval (

[tex]1-\alpha[/tex]

) did not cover which include both the left and right tail while  

[tex]\frac{\alpha }{2}[/tex]

is just the area of one tail which what we required to calculate the sample size

Now the sample size is mathematically represented as

          [tex]n = \frac{[Z_{\frac{\alpha }{2} }] ^2 * \sigma ^2}{MOE^2}[/tex]

substituting values

         [tex]n = \frac{1.96^2 * 10 ^2}{0.5^2}[/tex]

         [tex]n = 1537 \ gallons[/tex]

Answer:

y = 2666.67

Step-by-step explanation:

Well to solve this we can make a system of equations.

x = cost of car alone

y = cost of accesories,

[tex]\left \{ {{x+y=24000} \atop {x=8y}} \right.[/tex]

So now we plug in 8y for x in x + y = 24000.

(8y) + y = 24000

9y = 24000

Divide both sides by 9

y = 2666.666666

or 2666.67 rounded to the nearest hundredth.

Now that we have y we can plug that in for y in x=8y.

x = 8(2.666.67)

x = 21,333.33 rounded to the nearest hundredth.

Thus,

accessories "y" cost around 2666.67.

Hope this helps :)

Answer:

83,403

Step-by-step explanation: Take 74,145 and multiply it by 4%. Then take that number and add it to the 74,145 and that'll give you year one. For year 2 you'll take your total from year 1 and multiply it by the 4% growth rate then you'll add the 4% to what your ending from year 1 and that'll give you your total growth after 2 years. Then you'll take your ending total from year 2 and multiply it by 4% and then you'll add that 4% to the total end from year 2 and that'll give you your total growth of 4% every year for 3 consecutive years.

Hope this helps!

Answer:

h^2 means h²

(h squared)

Step-by-step explanation:

Step 1: Write equation

144 + h² = 225

Step 2: Subtract 144 on both sides

h² = 81

Step 3: Take square root

√h² = √81

h = 9

Answer:

30

Step-by-step explanation:

24 - (-6)

Apply rule : -(-a) = a

Negative (-) times a negative (-) is positive (+).

24 + 6

= 30

Answer:

-6 is in parentheses because it is a negative number. this prevents the equation from looking like a too long subtraction sign (24--6); therefore it is written as 24 - (-6).

this simplifies to 24 + 6 = 30

to negatives = a positive

Answer:

( P -2w) /2 = l

Step-by-step explanation:

P= 2W + 2l

Subtract 2W from each side

P= 2W -2W + 2l

P -2W = 2l

Divide by 2

( P -2w) /2 = l

Answer:

A. [tex]\frac{P - 2w}{2} = l[/tex]

Step-by-step explanation:

Well in,

P = 2w + 2l

to solve for l we need to single it out.

P = 2w + 2l

-2w

P - 2w = 2l

divide everything by 2

[tex]\frac{P - 2w}{2} = l[/tex]

Thus,

the answer is A.

Hope this helps :)

Answer:

(A) What is the z- score of the sample mean?

The z- score of the sample mean is 0.0959

(B) Is this sample significantly different from the population?

No; at 0.05 alpha level (95% confidence) and (n-1 =79) degrees of freedom, the sample mean is NOT significantly different from the population mean.

Step -by- step explanation:

(A) To find the z- score of the sample mean,

X = 75 which is the raw score

¶ = 74 which is the population mean

S. D. = 10.43 which is the population standard deviation of/from the mean

Z = [X-¶] ÷ S. D.

Z = [75-74] ÷ 10.43 = 0.0959

Hence, the sample raw score of 75 is only 0.0959 standard deviations from the population mean. [This is close to the population mean value].

(B) To test for whether this sample is significantly different from the population, use the One Sample T- test. This parametric test compares the sample mean to the given population mean.

The estimated standard error of the mean is s/√n

S. E. = 16/√80 = 16/8.94 = 1.789

The Absolute (Calculated) t value is now: [75-74] ÷ 1.789 = 1 ÷ 1.789 = 0.559

Setting up the hypotheses,

Null hypothesis: Sample is not significantly different from population

Alternative hypothesis: Sample is significantly different from population

Having gotten T- cal, T- tab is found thus:

The Critical (Table) t value is found using

- a specific alpha or confidence level

- (n - 1) degrees of freedom; where n is the total number of observations or items in the population

- the standard t- distribution table

Alpha level = 0.05

1 - (0.05 ÷ 2) = 0.975

Checking the column of 0.975 on the t table and tracing it down to the row with 79 degrees of freedom;

The critical t value is 1.990

Since T- cal < T- tab (0.559 < 1.990), refute the alternative hypothesis and accept the null hypothesis.

Hence, with 95% confidence, it is derived that the sample is not significantly different from the population.

Answer:

Surface area of the reflective glass is 543234.4 square feet.

Step-by-step explanation:

Given that: height = 311 feet, sides of square base = 619 feet.

To determine the slant height, we have;

[tex]l^{2}[/tex] = [tex]311^{2}[/tex] + [tex]309.5^{2}[/tex]

   = 96721 + 95790.25

   = 192511.25

⇒ l = [tex]\sqrt{192511.25}[/tex]

      = 438.761

The slant height, l is 438.8 feet.

Considering one reflecting surface of the pyramid, its area = [tex]\frac{1}{2}[/tex] × base × height

  area =  [tex]\frac{1}{2}[/tex] × 619 × 438.8

          = 135808.6

          = 135808.6 square feet

Since the pyramid has four reflective surfaces,

surface area of the reflective glass = 4 × 135808.6

                                                          = 543234.4 square feet

Answer: It will  take you about 61 years for you to reach your goal.

Step-by-step explanation:

We will represent this situation by an exponential function. So if you earn 5% yearly then we could represent it by 1.05.So in exponential function we need to find the initial value and the common difference and in this case the common difference is 1.05 and the initial value or amount is 50,000 dollars.

We could represent the whole situation by the equation.

y= [tex]50,000(1.05)^{x}[/tex]  where x is the number of years. so if you aspire to have 1,000,000 in some years then we will put in 1 million dollars for y and solve for x.

1,000,000 = 50,000(1.05)^x   divide both sides by 50,000

20 = (1.05)^x

x= 61.40

Answer: 0.18

Step-by-step explanation:

P(1 unit is defective)= C2  1* P^1*Q^1

C2 1= 2!/(1!*(2-1)!)=2

P=0.1 - probability that items from a production line are defective  

Q=1-0.1=0.9 - probability that items from a production line are functional.

P(1 unit is defective)= 2*0.1*0.9=0.18

Answer:

x = 30

Step-by-step explanation:

1/2(x+6) = 18

Expand brackets or use distributive law.

1/2(x) + 1/2(6) = 18

1/2x + 6/2 = 18

1/2x + 3 = 18

Subtract 3 on both sides.

1/2x + 3 - 3 = 18 - 3

1/2x = 15

Multiply both sides by 2.

(2)1/2x = (2)15

x = 30

Answer:

30

Step-by-step explanation:

Answer:

the perimeter of the square is just "(5+2x)(2)+(7+2x)(2)

Step-by-step explanation:

Answer:

2 × 10 + 2 × 14

Step-by-step explanation:

The frame is given to have measurements 2 times that of the photograph's measurements. We also know that the photograph is given by dimensions being 5 inch by 7 inch. Therefore the measurements of the frame should be 5 [tex]*[/tex] 2, which = 10 inches, by 7 [tex]*[/tex] 2 = 14 inches.

So the dimensions of the frame are 10 inch × 14 inch. As the frame is present as a rectangle, the perimeter is given by two times both dimensions together. That would be represented by the expression " 2 × 10 inch + 2 × 14 inch. " In other words you can say that the expression is 2 × 10 + 2 × 14 - the expression that represents the perimeter of the frame.

Answer:

Measure of angle W + measure of angle Z = 180°

Step-by-step explanation:

The reason is that angles in a straight line add up to 180° and angles at a point add up to 360° (i.e the sum of measure of angles W, X, Y, Z is 360°)

Answer:

D is your answer

Step-by-step explanation:

I have no explanation

Answer:

Step-by-step explanation:

From the summary of the given statistics;

The null and the alternative hypothesis for confirming that the new engine has a mean emission level below the current standard can be computed as follows:

Null hypothesis:

[tex]H_0: \mu = 0.60[/tex]

Alternative hypothesis:

[tex]H_a: \mu < 0.60[/tex]

Type I  error: Here, the null hypothesis which is the new engine has a mean level equal to  .6g/ml is rejected when it is true.

Type II error:  Here, the alternative hypothesis which is the new engine has a mean level less than.6g/ml is rejected when it is true.

Similarly;

From , A sample of 64 engines tested yields a mean emission level of = .5 g/mi. Assume that σ = .4.

Sample size n = 64

sample mean [tex]\overline x[/tex] = .5 g/ml

standard deviation σ = .4

From above, the normal standard test statistics can be determined by using the formula:

[tex]z = \dfrac{\bar x- \mu}{\dfrac{\sigma}{\sqrt{n}}}[/tex]

[tex]z = \dfrac{0.5- 0.6}{\dfrac{0.4}{\sqrt{64}}}[/tex]

[tex]z = \dfrac{-0.1}{\dfrac{0.4}{8}}[/tex]

z = -2.00

The p-value = P(Z ≤ -2.00)

From the normal z distribution table

P -value = 0.0228

Decision Rule: At level of significance ∝ = 0.05, If P value is less than or equal to level of significance ∝ , we reject the null hypothesis.

Conclusion: SInce the p-value is less than the level of significance , we reject the null hypothesis. Therefore, we can conclude that there is enough evidence that a new engine design has reduced the emissions to a level below this standard.

Answer:

[tex]\boxed{3}[/tex]

Step-by-step explanation:

We can use ratios to solve since the sides are proportional.

[tex]\frac{18}{x} =\frac{48}{8}[/tex]

Cross multiply.

[tex]48x=18 \times 8[/tex]

Divide both sides by 48.

[tex]\frac{48x}{48} = \frac{18 \times 8}{48}[/tex]

[tex]x=3[/tex]

The value of x in the given triangle is 3.

Two triangles are similar if they have the same ratio of corresponding sides and equal pair of corresponding angles.

Given are two similar triangles,

Therefore, they have the same ratio of corresponding sides

18/48 = x/8

x = 3

Hence, The value of x in the given triangle is 3.

For more references on similar triangles, click;

https://brainly.com/question/25882965

#SPJ2

Answer:

x = -8

Step-by-step explanation:

When h(x) = 48, you can simply just plug it back into the first equation. Don't let the h(x) confuse you!

Think of it like saying y = -4x + 16, y = 48.

48 = - 4x + 16

32 = - 4x

8 = -x

Divide by -1 both sides.

-8 = x

Answer:

A. This statement A is false.

B. This statement A is false.

C. This statement is true .

Step-by-step explanation:

Determine which of the following statements is true.

From the statements we are being given , we are to determine if the statements are valid to be true or invalid to be false.

SO;

A: If V is a 6-dimensional vector space, then any set of exactly 6 elements in V is automatically a basis for V

This statement A is false.

This is because any set of exactly 6 elements in V is linearly independent vectors of V . Hence, it can't be automatically a basis for V

B. If there exists a set that spans V, then dim V = 3

The statement B is false.

If there exists a set , let say [tex]v_1 ...v_3[/tex], then any set of n vector (i.e number of elements forms the basis of V)  spans V. ∴ dim V < 3

C. If H is a subspace of a finite-dimensional vector space V  then dim H ≤ dim V is a correct option.

This statement is true .

We all know that in a given vector space there is always a basis, it is equally important to understand that there is a cardinality for every basis that exist ,hence the dimension of a vector space is uniquely defined.

SO,

If  H is a subspace of a finite-dimensional vector space V  then dim H ≤ dim V is a correct option.

Answer:

A ) i) X control chart : upper limit = 50.475, lower limit = 49.825

    ii) R control chart : upper limit =  1.191, lower limit = 0

Step-by-step explanation:

A) Finding the control limits

grand sample mean = 1253.75 / 25 = 50.15

mean range = 14.08 / 25 = 0.5632

Based on  X control CHART

The upper control limit ( UCL ) =

grand sample mean + A2* mean range ) = 50.15 + 0.577(0.5632) = 50.475

The lower control limit (LCL)=

grand sample mean - A2 *  mean range = 50.15 - 0.577(0.5632) = 49.825

Based on  R control charts

The upper limit = D4 * mean range = 2.114 * 0.5632 = 1.191

The lower control limit = D3 * mean range = 0 * 0.5632 = 0  

B) estimate the process mean and standard deviation

estimated process mean = 50.15 = grand sample mean

standard deviation = mean range / d2  = 0.5632 / 2.326 = 0.2421

note d2 is obtained from control table

Answer:

[tex]f(x) = x^3 -sinx +Cx+D[/tex]

Step-by-step explanation:

Given that:

[tex]f ''(x)= 6x +sinx[/tex]

We are given the 2nd derivative of a function f(x) and we need to find f(x) from that.

We will have to integrate it twice to find the value of f(x).

Let us have a look at the basic formula of integration that we will use in the solution:

[tex]1.\ \int {(a\pm b)} \, dx =\int {a} \, dx + \int {b} \, dx \\2.\ \int {x^n} \, dx = \dfrac{x^{n+1}}{n+1}+C\\3.\ \int {sinx} \, dx = -cosx+C\\4.\ \int {cosx} \, dx = sinx+C[/tex]

[tex]\int\ {f''(x)} \, dx =\int\ {(6x +sinx)} \, dx \\\Rightarrow \int\ {6x} \, dx + \int\ {sinx} \, dx \\\\\Rightarrow 6\dfrac{x^2}{2} -cosx +C\\\Rightarrow 3{x^2} -cosx +C\\\Rightarrow f'(x)=3{x^2} -cosx +C\\[/tex]

Now, integrating it again to find f(x):

[tex]f(x) =\int {f'(x)} \, dx =\int{(3{x^2} -cosx +C)} \, dx \\\Rightarrow \int{3{x^2}} \, dx -\int{cosx} \, dx +\int{C} \, dx\\\Rightarrow 3\times \dfrac{x^3}{3} -sinx +Cx+D\\\Rightarrow x^3 -sinx +Cx+D\\\\\therefore f(x) = x^3 -sinx +Cx+D[/tex]

$1 = 5copies means

$5 = 25 copies obviously

then

$x = 100 copies

100 / 5 = $x

so she needs

$20

The cost of printing 100 copies of artwork is $20.

A unitary method is a mathematical way of obtaining the value of a single unit and then deriving any no. of given units by multiplying it with the single unit.

Suppose 2 pens cost $10, So the cost of 1 pen is (10/2) = $5.

From this unitary cost of pens, we can determine the cost of any no. of pens by multiplying the unit cost by the no. of pens.

Given, The cost of printing 5 artworks is $1.

∴ The cost of printing 100 copies is $(100/5),

= $20.

learn more about the unitary method here :

https://brainly.com/question/22056199

#SPJ2

Answer:

x=4

Step-by-step explanation:

5x - 17 = -x +7

Add x to each side

5x+x - 17 = -x+x +7

6x -17 = 7

Add 17 to each side

6x-17+17 = 7+17

6x =24

Divide each side by 6

6x/6 = 24/6

x = 4

Answer:

4

Step-by-step explanation:

5x - 17 = -x + 7

Add x on both sides.

5x - 17 + x = -x + 7 + x

6x - 17 = 7

Add 17 on both sides.

6x - 17 + 17 = 7 + 17

6x = 24

Divide both sides by 6.

(6x)/6 = 24/6

x = 4