The flag starts at 0 and moves 8 feet right to on the number line. Then the flag moves 12 feet left to on the number line. Then the flag moves 13 feet right to on the number line. Nine is less than 10.
PLEASE HELP

Answer:2

Step-by-step explanation:Because the 2 is closest to the middle line

Answer:

relationship describes angles 1 and 2 is supplementary angles. From the given figure

it is concluded that

the relation ship between angle 1 and 2 is supplementary angles

because its is  linear pair

and forms a line

therefore , the angles are supplementary angles

hence , relationship describes angles 1 and 2 is supplementary angle

Step-by-step explanation: Hope this helps !! Mark me brainliest!! :))

Answer:

1st one.-sin(X)+5e^5x

Answer: 49,000

48805 is greater than 48500, so it rounds to 49,000

Answer: 3. 35x + 15 = 155

Step-by-step explanation:

35 x 4 = 140

140 + 15 = 155

According to the question the percent abundance of the medium nails in the sample is approximately 18.95%.

Whenever the set of data is presented from least to largest, the median is indeed the number in the middle. For instance, since 8 is in the middle, this would represent the median value here.

To find the percent abundance of the medium nails in the sample, we first need to calculate the total number of nails in the sample:

Total number of nails = 67 + 18 + 10 = 95

Next, we can calculate the percent abundance of the medium nails using the formula:

Percent abundance = (number of medium nails / total number of nails) x 100%

Using the values from of the table as inputs, we obtain:

Percent abundance of medium nails = (18 / 95) x 100% ≈ 18.95%

As a result, the sample's average percentage of medium nails is roughly 18.95%.

To know more about medium visit:

https://brainly.com/question/16408033

#SPJ1

Step-by-step explanation:

the perimeter of a rectangle is

2×length + 2×width

in our case

length = width + 3

and

2×length + 2×width = 30

using the first equation in the second :

2×(width + 3) + 2×width = 30

width + 3 + width = 15

2×width + 3 = 15

2×width = 12

width = 12/2 = 6 ft

length = width + 3 = 6 + 3 = 9 ft

The ratio between the perimeter of triangle ABC and the perimeter of triangle XYZ is given as follows:

1/3.

The perimeter of a triangle is the total length of its three sides. To find the perimeter of a triangle, you need to add up the lengths of all three sides.

The ratio between the side lengths of triangle ABC and triangle XYZ is given as follows:

5/15 = 1/3.

The perimeter of a triangle is measured in units, as area the side lengths, hence they have the same ratio, and thus the ratio between the perimeter of triangle ABC and the perimeter of triangle XYZ is given as follows:

1/3.

More can be learned about the perimeter of a triangle at https://brainly.com/question/24382052

#SPJ1

The volume of the cone is  2119. 5 cubic centimeters

The formula used for calculating the volume of a cone is expressed as;

V = πr² h/3

Given that the parameters are namely;

Now, substitute the values, we have;

Volume , V = 3.14 × 15² × 9/3

Divide the values, we have;

Volume = 3.14 × 225 × 3

Multiply the values, we get;

Volume, V = 2119. 5 cubic centimeters

Learn about volume at: https://brainly.com/question/1972490

#SPJ1

The nearest ten thousand of the digits  14509 is 14, 000.

The rule for rounding to the nearest ten thousand is to look at the last four digits.

If the last four digits of the number is greater than 5000, we have to round the value up but if the number is below 5000 we have to round below.

For example let's round up 27567 to the nearest ten thousands.

Therefore, 7567 is above 5000, Hence, we have to round up. The nearest ten thousand of 27567 is 30000.

Let's round 14509 to the nearest ten thousand.

The nearest ten thousand of 14509 is 14, 000

learn more on approximation here: https://brainly.com/question/108438

#SPJ1

Therefore , the solution of the given problem of unitary method comes out to be the pantry has 16 quarts of ice cream.

The goal can be achieved by making use of what has expression learned to date, utilizing this global access, and incorporating all crucial elements from previous changeable study that employed a specific technique. It is going to be equation possible to get in touch with the entity again if the expected claim result actually happens, or both crucial processes will surely miss the statement. A Rs ($1.21) redeemable fee may be needed for fifty pens.

Here,

Finding the overall quantity of cake in the kitchen is a good place to start. If there are 10 pastries, each measuring 1/4 inch, then there will be:

=> 10 desserts divided by 1/4 each equals the total cake.

=> Cake total equals 10/4 cakes.

=>  2.5 pastries altogether

=>  1 3/5 pints of ice cream for every 1/4 cake.

=>  8 and a half pints of ice cream per 1/4 cake

To determine the total amount of ice cream, we can multiply the ice cream per cake by the total number of cakes:

=>  Total ice cream equals the sum of the cakes' ice cream.

=>  Total ice cream =  (8/5 quarts per 1/4 cake) * (10/4 cakes)

=> Total ice cream = 16 quarts

Consequently, the pantry has 16 quarts of ice cream.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1

Answer:

I'm too stressed rn like be so foreal

Answer:

x < 2 O R x > 1 ⇔ ( − ∞ , ∞ )

Explanation:

x < 2 means x can take any value less than two and interval notation, this means ( − ∞ , 2 ) , meaning that all numbers between − ∞ and 1 are included and as − ∞ and 2 are not included we have use small brackets. This forms one set of numbers, say P . x > 1 means x can take any value greater than one and interval notation tis means ( 1 , ∞ ) , meaning that all numbers between 1 and ∞ are included, but not 13 and ∞ . This forms another set of numbers, say Q . Hence x < 2 O R x > 1 represents the union of two sets P and Q i.e P ∪ Q or in other words ( − ∞ , 2 ) ∪ ( 1 , ∞ ) . Observe that P ∪ Q includes all the numbers from − ∞ to ∞ and hence x < 2 O R x > 1 ⇔ ( − ∞ , ∞ )

Answer:

Step-by-step explanation:

To find the value of t, we can use the information given about the temperature at two different elevations and use the formula for a linear equation.

Let's assume that the temperature decreases by tº Fahrenheit for every additional 100 feet above sea level, where t is the constant we want to find.

Then, using the two points given:

- (8000, 65) where 65 is the temperature in Fahrenheit at 8000 feet above sea level

- (10,500, 15) where 15 is the temperature in Fahrenheit at 10,500 feet above sea level.

We can calculate the slope of the line connecting these two points:

slope = (15 - 65) / (10,500 - 8,000) = -25

The slope of the line represents the amount that the temperature decreases per unit increase in elevation. In this case, we've found that the temperature decreases by 25 Fahrenheit for each increase in elevation of 1000 feet.

To find the value of t, we need to express the slope in terms of the decrease in temperature per 100 feet of elevation. We can do this by dividing the slope by 10:

t = slope / 10 = -2.5

Therefore, the value of t is -2.5.

Answer: To solve the third-order differential equation y''' + y' = cot(x) by variation of parameters, we first need to find the solution to the associated homogeneous equation, which is:

y''' + y' = 0

The characteristic equation is r^3 + r = 0, which can be factored as r(r^2 + 1) = 0. This gives us the roots r = 0, r = i, and r = -i. Therefore, the general solution to the homogeneous equation is:

y_h = c1 + c2 cos(x) + c3 sin(x)

To find a particular solution to the non-homogeneous equation using variation of parameters, we assume that the solution has the form:

y_p = u1(x) + u2(x) cos(x) + u3(x) sin(x)

where u1, u2, and u3 are functions to be determined.

We can find the derivatives of y_p:

y'_p = u1'(x) + u2'(x) cos(x) - u2(x) sin(x) + u3'(x) sin(x) + u3(x) cos(x)

y''_p = u1''(x) + u2''(x) cos(x) - 2u2'(x) sin(x) - u2(x) cos(x) + u3''(x) sin(x) + 2u3'(x) cos(x) - u3(x) sin(x)

y'''_p = u1'''(x) + u2'''(x) cos(x) - 3u2''(x) sin(x) - 3u2'(x) cos(x) - u2(x) sin(x) + u3'''(x) sin(x) + 3u3''(x) cos(x) - 3u3'(x) sin(x)

Substituting these derivatives into the non-homogeneous equation, we get:

u1'''(x) + u2'''(x) cos(x) - 3u2''(x) sin(x) - 3u2'(x) cos(x) - u2(x) sin(x) + u3'''(x) sin(x) + 3u3''(x) cos(x) - 3u3'(x) sin(x) + u1'(x) + u2'(x) cos(x) - u2(x) sin(x) + u3'(x) sin(x) + u3(x) cos(x) = cot(x)

Grouping the terms with the same functions together, we get:

u1'''(x) + u1'(x) = 0

u2'''(x) cos(x) - 3u2''(x) sin(x) - u2(x) sin(x) + u2'(x) cos(x) + u2'(x) cos(x) = cot(x) cos(x)

u3'''(x) sin(x) + 3u3''(x) cos(x) - 3u3'(x) sin(x) + u3'(x) sin(x) + u3(x) cos(x) = cot(x) sin(x)

The first equation is a first-order differential equation, which can be solved by integrating both sides:

u1'(x) + u1(x) = c1

where c1 is a constant of integration. The solution to this equation is:

u1(x) = c1 + c2 e^(-x)

where c2 is another constant of integration.

Step-by-step explanation:

Answer:

0 degrees

Step-by-step explanation:

To find m/YAI, we need to first find the measure of angle KAI, which is the sum of angles KAY and LAI. Then, we can find the measure of angle YAI by subtracting the measure of angle KAI from 180 degrees.

Using the angle addition postulate, we know that:

m/KAY + m/LAI = m/KAI

Substituting the given values, we get:

4x + 39 + 12x - 9 = m/KAI

Simplifying the expression, we get:

16x + 30 = m/KAI

Now, we need to solve for x. To do this, we can use the fact that angles KAY and LAI are supplementary (add up to 180 degrees) since they form a straight line. Thus:

m/KAY + m/LAI = 180

Substituting the given values, we get:

4x + 39 + 12x - 9 = 180

Simplifying the expression, we get:

16x + 30 = 180

Subtracting 30 from both sides, we get:

16x = 150

Dividing both sides by 16, we get:

x = 9.375

Now that we know x, we can substitute it back into the equation we found earlier:

16x + 30 = m/KAI

16(9.375) + 30 = m/KAI

150 + 30 = m/KAI

m/KAI = 180

So, we know that angle KAI measures 180 degrees. To find m/YAI, we need to subtract the measure of angle KAI from 180 degrees:

m/YAI = 180 - m/KAI

m/YAI = 180 - 180

m/YAI = 0

Therefore, we can conclude that the measure of angle YAI is 0 degrees. This means that YAI is not an angle, but a line segment, and it does not have a measure in degrees.

Answer:

The answer is 40% :) Hope this helps!

Answer:

A.=False

B.=True

C.=False

D.=True

Step-by-step explanation:

The original ration is 2 gallons of water for 4 players.

Each player requires 1/2 gallon of water.

To get the amount of water needed multiply 1/2 by the amount of players.

1*(1/2) does not equal 1

2*(1/2) equals 1

10*(1/2) does not equal 4

30*(1/2) equals 15

The vector equations of L₂ when expressed as Cartesian equations are

y = 0

x = (z ± √(z² - 4(z-2))) / 2

z = [(4 - ((x-1)/(-z))²) ± √((4 - ((x-1)/(-z))²)² + 64)] / 8

To find the vector equation of the line L₂, we need to find a vector that is perpendicular to L₁ and passes through the point (1,0,2). Let's start by finding the vector equation of L₁.

Let P(x,y,z) be a point on L₁. Then the vector equation of L₁ is given by:

r₁ = P + t * d₁

where d₁ is the direction vector of L₁ and t is a scalar parameter.

Since L₂ is perpendicular to L₁, its direction vector must be perpendicular to d₁. Thus, we can find a vector that is perpendicular to d₁ by taking the cross product of d₁ with any non-zero vector that is not parallel to d₁. Let's choose the vector (0,1,0):

v = d₁ x (0,1,0) = (-z,0,x)

Note that we can choose any non-zero vector that is not parallel to d₁, and we will still get a vector that is perpendicular to d₁.

Now we have a point on L₂ (1,0,2) and a direction vector (v), so we can write the vector equation of L₂:

r₂ = (1,0,2) + s * v

where s is a scalar parameter.

To express the Cartesian equations of L₂, we can write the vector equation as a set of three parametric equations:

x = 1 - sz

y = 0

z = 2 + sx

We can eliminate the parameter s by solving for it in two of the equations and substituting into the third equation:

s = (x - 1) / (-z)

s = (z - 2) / x

Setting these two expressions equal to each other and solving for x, we get:

[tex]x^2 - zx + z - 2 = 0[/tex]

This is a quadratic equation in x, so we can solve for x using the quadratic formula:

[tex]x = (z \± \sqrt{(z^2 - 4(z-2)})) / 2[/tex]

Substituting this expression for x into one of the parametric equations, we get:

y = 0

And substituting the expressions for x and s into the other parametric equation, we get:

[tex]z = 2 + [(z \± \sqrt{(z^2 - 4(z-2)})) / 2] * [(1 - sz) / (-z)][/tex]

Simplifying this equation, we get:

[tex]4z^2 - (4 - s^2)z - 4 = 0[/tex]

Again, this is a quadratic equation in z, so we can solve for z using the quadratic formula:

[tex]z = [(4 - s^2) \± \sqrt((4 - s^2)^2 + 64)] / 8[/tex]

z = [(4 - s²) ± √((4 - s²)² + 64)] / 8

Finally, we can substitute these expressions for x and z into one of the parametric equations to get:

[tex]y = 0\\x = (z \± \sqrt{(z^2 - 4(z-2)})) / 2\\z = [(4 - ((x-1)/(-z))^2) \± \sqrt{((4 - ((x-1)/(-z))^2)^2} + 64)] / 8[/tex]

These are the Cartesian equations of L₂.

Learn more on cartesian equations here;

https://brainly.com/question/14869452

#SPJ1

Answer: 2.5 dm

Step-by-step explanation:

Divide 25.0 by 10

= 2.5

Answer:

Experimental Procedure:

Materials:

Piece of wood

Electronic balance

Bunsen burner

Heat-resistant mat

Stopwatch or timer

Safety goggles

Lab coat

Safety Precautions:

Wear safety goggles and a lab coat to protect your eyes and clothing from any sparks or flames.

Place the heat-resistant mat under the Bunsen burner to prevent any accidental fires.

Use the Bunsen burner only under adult supervision.

Be cautious when handling hot objects, and allow them to cool before touching.

Procedure:

Measure the initial mass of the piece of wood using an electronic balance, and record it in a table.

Light the Bunsen burner, and place the piece of wood over the flame using tongs. Ensure that the wood is fully engulfed in the flame.

Use a stopwatch or timer to time how long the wood burns for (in this case, 15 minutes).

After 15 minutes, turn off the Bunsen burner and remove the piece of wood from the flame using tongs.

Allow the wood to cool, and then measure its final mass using the electronic balance, and record it in the table.

Calculate the difference between the initial and final mass of the wood, and record it in the table.

Repeat steps 1-6 three times to obtain three sets of data.

Calculate the average mass of the burned wood and compare it to the initial mass of the unburned wood to determine if the student's prediction was correct.

Conclusion:

If the average mass of the burned wood is less than the initial mass of the unburned wood, the student's prediction was correct, and he can conclude that the wood underwent a chemical change when it was burned. If the average mass is greater than or equal to the initial mass, the prediction was incorrect, and the student may need to revise his hypothesis or experimental design.

Answer:

162, 147 etc.

Step-by-step explanation:

we have to find

[tex]N = k^2 \cdot p[/tex]

we can iterate k = 1 to 10 to check all possible solutions,

[tex]N = 9^2 \cdot 2[/tex]

[tex]N = 7^2 \cdot 3[/tex]

N = 162, 147 etc.

Hopefully this answer helped you!!

The probability that a randomly selected student's age is more than 18 years old but no more than 21 years old is 0.57.

What is a continuous random variable's probability?

Continuous random variables are defined as having an infinite number of possible values. A continuous random variable hence has no probability of having an accurate value.

a) In order to create a probability distribution, all potential values of the random variable must be listed along with the related probabilities. We may get the relative frequency (or probability) for each value of the random variable from the above frequency distribution:

Age Frequency Probability

16         3              0.03

17         5              0.05

18        10              0.10

19        15              0.15

20       20             0.20

21        22             0.22

22       17               0.17

Total   92              1.00

b) We can use a histogram to see the probability distribution. The likelihood is represented by the vertical axis, while the age is represented by the horizontal axis. The height of each bar in the histogram should represent the likelihood for that age, with bars for each age value.

With a peak at age 20, the distribution's shape looks to be roughly symmetrical.

c) To get the likelihood that a student chosen at random is under 20 years old, we must add the probabilities for the ages 16, 17, 18, and 19:

P(age < 20) = P(age = 16) + P(age = 17) + P(age = 18) + P(age = 19)

= 0.03+0.05+0.10+0.15

= 0.33

Consequently, there is a 0.33 percent chance that a randomly chosen student is under 20 years old.

d) To determine the likelihood that a randomly chosen student is older than 18 but not older than 21, we must add the probabilities for the ages 19, 20, and 21:

P(18 < age ≤ 21) = P(age = 19) + P(age = 20) + P(age = 21)

= 0.15 + 0.20 + 0.22

= 0.57

As a result, there is a 0.57 percent chance that a randomly chosen student will be older than 18 but not older than 21.

To know more about probability visit:

https://brainly.com/question/30719832

#SPJ1

The answer is x = 5±√61/2, I really hope this helps (:

Answer: Reflection in the y -axis:

Explanation: The rule for a reflection over the y -axis is (x,y)→(−x,y) .\

Answer:

1.986 x 10 to the tenth power

Step-by-step explanation:

The height of the pole to the nearest foot, given the angle of elevation and the surveyor distance, is C. 135 ft

To find the height of the pole, we can use the tangent function from trigonometry. The tangent of the angle of elevation (44°) is equal to the ratio of the height of the pole (h) minus the transit height (4 feet) to the distance between the transit and the pole (140 feet).

So, we have:

tan(44°) = (h - 4) / 140

h - 4 = 140 × tan(44°)

h = 140 × tan(44°) + 4

h = 140 × 0.965 + 4

h = 135.1

Find out more on height at https://brainly.com/question/30937141

#SPJ1

Answer:

To calculate the speed of the athlete in meters per second (m/s), we can use the formula:

Speed = Distance / Time

Here, the distance is 200 meters and the time is 25 seconds. Substituting these values into the formula, we get:

Speed = 200 meters / 25 seconds

Simplifying, we get:

Speed = 8 meters/second

Therefore, the athlete ran at a speed of 8 meters per second.

Answer:

The excluded value in the domain is x = 2 because the denominator of the rational function becomes zero at this value of x, which results in division by zero.

At x = 2, there is a vertical asymptote, which means that the graph of the function approaches positive or negative infinity as x approaches 2 from either side.

The correct answer is A) test statistic T equals -1.952; P value, 0.0414.

An assumption or concept is given as a hypothesis for the purpose of debating it and testing if it might be true. In the scientific process, the hypothesis is developed before any pertinent research—aside from a basic background review—has been conducted.

The null hypothesis that there is no difference between the triglyceride test levels is sufficiently refuted by the available data.

With 9 degrees of freedom and a significance threshold of 0.05, this can be ascertained by comparing the derived test statistic (T) with the critical value of t from the t-distribution table. We reject the null hypothesis if the estimated T value is in the rejection zone (i.e., T value is smaller than the critical value of t).

The computed T value in this instance is -1.952, which is in the rejection region (i.e., less than the critical value of t of -1.833). Hence, we get to the conclusion that there is enough data to imply that the new diet has an effect on lowering triglyceride levels and reject the null hypothesis that there is no difference between the triglyceride test levels.

To know more about Null Hypthesis visit:

https://brainly.com/question/16261813

#SPJ1

To subtract 6/7 from 2 1/4, we need to find a common denominator. The least common multiple of 7 and 4 is 28, so we can convert 2 1/4 to 9/4 and 6/7 to 24/28. Then we can subtract:

9/4 - 24/28

= 63/28 - 24/28

= 39/28

Therefore, 2 1/4 - 6/7 = 39/28.

To solve for the blank in 2 5/12 - blank = 2/3, we can start by converting 2 5/12 to an improper fraction:

2 5/12 = (2*12 + 5)/12 = 29/12

Then we can subtract 2/3 from both sides:

2 5/12 - 2/3 = blank

To subtract these fractions, we need to find a common denominator. The least common multiple of 3 and 12 is 12, so we can convert 2/3 to 8/12. Then we can subtract:

29/12 - 8/12

= 21/12

= 7/4

Therefore, the blank in 2 5/12 - blank = 2/3 is 7/4.

To subtract 5 3/8 from 7 1/12, we need to find a common denominator. The least common multiple of 8 and 12 is 24, so we can convert both mixed numbers to improper fractions:

7 1/12 = (712 + 1)/12 = 85/12

5 3/8 = (58 + 3)/8 = 43/8

Then we can subtract:

85/12 - 43/8

= 85/12 - (433)/(83)

= 85/12 - 129/24

= 5/24

Therefore, 7 1/12 - 5 3/8 = 5/24.

To solve for the blank in blank + 7/10 = 2 9/20, we can start by converting 2 9/20 to an improper fraction:

2 9/20 = (2*20 + 9)/20 = 49/20

Then we can subtract 7/10 from both sides:

blank + 7/10 - 7/10 = 49/20 - 7/10

Simplifying the right side:

49/20 - 7/10 = (492)/(202) - (74)/(104) = 98/40 - 28/40 = 70/40 = 7/4

Therefore, blank + 7/10 - 7/10 = 7/4, and solving for blank:

blank = 7/4

Therefore, the blank in blank + 7/10 = 2 9/20 is 7/4.