The graph shows a wave that oscillates with a frequency of 60 Hz. Based on the information given in the diagram, what is the speed of the wave?

Answer:

Flexibility Increases

Pre-breathe time decreases

Mass of suit decreases.

Explanation:

Spacesuits are designed for space shuttles when a person goes to explore the galaxy. The spacesuits shuttle era are pressurized at 4.3 pounds per inch. The gas in the suit is 100% of oxygen and there is more oxygen to breathe when the altitude of 10,000 is reached. This will decrease the breathing time and mass of suit.

Answer:

they get closer together

Explanation:

Answer: 0.0180701 s

Explanation:

Given the following :

Length of string (L) = 10 m

Weight of string (W) = 0.32 N

Weight attached to lower end = 1kN = 1×10^3

Using the relation:

Time (t) = √ (weight of string * Length) / weight attached to lower end * acceleration due to gravity

g = acceleration due to gravity = 9.8m/s^2

Weight of string = 0.32N

Time(t) = √ (0.32 * 10) / [(1*10^3) * (9.8)]

Time = √3.2 / 9800

= √0.0003265

= 0.0180701s

I inferred you've referring to a close electrical circuit.

Answer:

The circuit is complete.

Explanation:

A closed electrical circuit is indeed a complete circuit. Also, it allows charges to flow, the bulbs in the circuit will shine and it is not broken.

It is termed closed circuit because there is no brokage in the series of electrical wires or the switch; which may prevent the free flow of current or charges. Thus, a feature that marks closed circuits is that they are complete.

Answer:

The circuit is complete.

Explanation:

Answer;

Motion: A body is said to be in motion if it changes its position with respect to its surroundings.

Explanation:

Rest and motion are the relative terms because they depend on the observer's frame of reference. So if two different observers are not at rest with respect to each other, then they too get different results when they observe the motion or rest of a body .

one example for each. Rest: If a body does not change its position with respect to its surroundings, the body is said to be at rest. ... Motion: A body is said to be in motion if it changes its position with respect to its surroundings.

Answer:

λ₀ = 2 d n

Explanation:

A soap film is a layer where the lus is reflected on the surface and on the inside of the film, these two reflected rays can interfere with each other either constructively or destructively.

Let's analyze the general conditions of this interference,

* When the ray of light reaches the surface of the film it is reflected, as the index of refraction of the air is less than the index of the film, the reflected ray has a phase change of 180º

* When the ray penetrates the film, its wavelength changes due to the refractive index of the film.

          λ = λ₀ / n

where lick is the wavelength in the vacuum or air and n index of refraction of the film, in general this interference is observed perpendicular to the film, so the sine veils 1. the expression for constructive interference taking in what previous remains

         2d = (m + ½) λ

the expression for destructive interference remains

         2d = m λ

          2d = m λ₀ / n

When the film is placed on a glass plate whose index of refraction is greater than the index of refraction of the film, in the reflection in the lower part of the film another phase difference of 180º is created, for which we have a difference of total phase of 180 +180 = 360º, which is equivalent to no phase difference, therefore the two previous equations are interchanged.

Therefore where we had destructive interference now a cosntructive interference happens we can see the reflected light.

Find us the wavelength that this constructive interference creates

           2d n = m λ₀

           λ₀ = 2 d n / m

To find the minimum wavelength, suppose we observe the first interference pattern m = 1

         λ₀ = 2 d n

where d is the thickness of the film and n the index of refraction of the same

Answer:

1525 meters above ground

Explanation:

So to do this you will need to write this in slope intercept form or [tex]y=mx+b[/tex]. So 650 would be the b, 175 would be the m, and the x would be 5 so the equation would be [tex]y=175(5)+650[/tex] so if you solve or simplify the equation you will get 1525 meters above the ground and that would be our final answer.

Answer:

Explanation:

Reddening of sun's rays at sunset and sunrise is due to scattering of light . The white light consisting of seven colours coming from the sun are scattered in different directions when they fall on the air particles present in atmosphere . Red coloured light scatters least and it travels straight forward to the viewer on the earth . On the other hand other colours scatter most and therefore they go out of area of vision for the viewer on the earth . Since only red colour reaches the eye of the viewer , sun's ray appear red . This happens during sunrise and sunset . It is so because during this period , sun rays travel far greater distance through  atmosphere , so scattering is most pronounced .

Answer:

Explanation:

We shall apply gas law formula to get the solution .

P₁ V₁ / T₁ = P₂ V₂ / T₂

P₁ = 10⁵ + 18 x 10³ x 9.8  where 10⁵ Pa is atmospheric  pressure at surface

= 1.764 x 10⁵ + 10⁵

= 2.764 x 10⁵

2.764 x 10⁵  x 3 / ( 273 + 9 ) = 10⁵ x V₂ / ( 273 + 22 )

V₂ = 8.67 cm³

Velocity is the description of an object's motion from one point to another.

It tells the speed with which the trip is completed, and the direction from the start-point to the end-point.  It tells nothing about any twists, turns, loops, bends, or stops along the way.

Answer:

1) a    α,  m   I,  W=F.d    W =τ . θ,

2)  a = v²/r

Explanation:

1) The amounts of rotational and translational motion are related

acceleration is

        a = d²x / dt²

    linear displacement is equivalent to angular rotation, therefore angular acceleration is

      α = d²θ / dt²

force in linear motion is equivalent to moment in endowment motion

       F = m a

       τ = I α

the mass is the inertia of the translation, in rotational motion the moment of inertia is the rotational inertia

          I = m r²

Work is defined by W = F. d

in rotation it is defined by W = τ . θ

The linear momentum is p = mv

the angular momentum L = I w

momentum the linear motion is I = F dt

in the rotation it is I = τ dt

2) The velocity is a vector therefore it has modulus and direction, linear acceleration changes the modulus of velocity, whereas circular motion changes the direction (the other element of the vector).

      [tex]a_{c}[/tex]Ac = v²/r

Answer:

625 cm²

Explanation:

The pressure is the same on both pistons.

F/A = F/A

200 N / 25 cm² = 5000 N / A

A = 625 cm²

The amount of lighting on a surface drops to (1/4) of the initial illumination when the distance between a light source and the surface it falls on is doubled.

The amount of light or luminous flux that falls on a surface is known as illumination. It is expressed as lux or lumens per square meter.

The square of the distance has an inverse relationship with the light intensity;

[tex]\rm I = \frac{1}{r^2}[/tex]

Where,

I is the light intensity

r is the distance

Let r is the distance and I is the sound intensity for case 2;

r' = 2r

[tex]\rm I' = \frac{1}{(2r)^2} \\\\ I' = \frac{1}{4r^2} \\\\ I' = \frac{I}{4}[/tex]

When we double the distance between a source of light and the surface on which it falls, the amount of illumination on the surface decreases to(1/2) of the original illumination.

Hence the value of the fraction is 1/4.

To learn more about the illumination refer;

https://brainly.com/question/20160684

#SPJ2

Answer:

Explanation:

For entropy change the formula is

ΔS = ΔQ / T

ΔQ = Δ H

ΔS = Δ H / T

Given

Δ H = + 162.8 kJ

We can take equilibrium temperature as average temperature of the whole process

So, T = 273 + 87 = 360 K

ΔS = Δ H / T

=  162.8 kJ  / 360

= +  0.508 kJ / K .

When the magnitude of the heat transfer for the process is 162.8 kJ, Then the entropy change for the mixing process, in kJ/K is = + 0.508 kJ / K

For The entropy change, the formula is

Then ΔS = ΔQ / T

After that ΔQ = Δ H

Then ΔS = Δ H / T

Given as per question are:

Then Δ H = + 162.8 kJ

Now We can take equilibrium temperature as average temperature of the whole process are:

So, T is = 273 + 87 = 360 K

Then ΔS = Δ H / T

After that = 162.8 kJ / 360

Therefore, = + 0.508 kJ / K.

Find more information about Entropy change here:

https://brainly.com/question/17241209

Answer:

A car driving in a straight line 20 m/s

Explanation:

ayepecks silly

Answer:

θ = 41.8º

Explanation:

This is an internal total reflection exercise, the equation that describes this process is

         sin θ = n₂ / n₁

where n₂ is the index of the incident medium and n₁ the other medium must be met n₁> n₂

        θ = sin⁻¹ n₂ / n₁

let's calculate

       θ = sin⁻¹ (1.00 / 1.50)

       θ = 41.8º

Answer:

theory

Explanation:

A scientist can contribute to the formation of a theory in a particular subject by conducting research along the line of that subject.

Conducting research requires the formation of a hypothesis and testing the hypothesis by conducting a relevant experiment during which data are gathered, analyzed, and interpreted in order to falsify or accept the hypothesis.

A good experiment must be replicate-able. When the same experiment is repeated by different independent researchers and the same conclusion is arrived at, this could potentially lead to the formation of a theory.

Hence, a scientist can contribute to the formation of a theory by conducting an experiment with replicability in order to test a hypothesis.

Answer:

1. Concave mirror.

2. 4.17 m or 417 cm.

Explanation:

The following data were obtained from the question:

Object distance (u) = 5 m

Magnification (M) = 5

Focal length (f) =..?

1. Identification of the mirror.

To determine whether or not the mirror is concave or convex, we must first of all calculate the image distance.

This can be obtained as follow:

Object distance (u) = 5 m

Magnification (M) = 5

Image distance (v) =.?

Magnification (M) = image distance (v) /object distance (u).

M = v/u

5 = v/5

Cross multiply

v = 5 x 5

v = 25 m

Since the image distance obtained is positive, the mirror is said to be a concave mirror.

2. Determination of the focal length of the mirro.

This can be obtained as follow:

Object distance (u) = 5 m

Image distance (v) = 25 m

Focal length (f) =...?

1/f = 1/v + 1/u

1/f = 1/25 + 1/5

1/f = 0.04 + 0.2

1/f = 0.24

Cross multiply

f x 0.24 = 1

Divide both side by 0.24

f = 1/0.24

f = 4.17 m

Converting the focal length of cm, we have:

1 m = 100 cm

Therefore, 4.17 m = 4.17 x 100 = 417 cm

Therefore, the focal length of the mirror is 4.17 or 417 cm.

Answer:

t = 0.051 seconds

Explanation:

Given that,

A skydiver jumped out of a plane and fell 9 miles to the ground. It means 9 miles is the distance covered.

The average speed of the skydiver is 174 miles/hour

We need to find the time for which he dive last. It means t is the time taken. Total distance covered divided by time taken is called average speed. So,

[tex]v=\dfrac{d}{t}\\\\t=\dfrac{d}{v}\\\\t=\dfrac{9}{174}\\\\t=0.051\ s[/tex]

So, a skydiver dive for 0.051 seconds.

Answer:

W =1562.53 N

Explanation:

It is given that,

Radius of the aluminium ball, r = 24 cm = 0.24 m

The density of Aluminium, [tex]d=2698.4\ kg/m^3[/tex]

We need to find the thrust and the force. The mass of the liquid displaced is given by :

[tex]m=dV[/tex]

V is volume

Weight of the displaced liquid

W = mg

[tex]W=dVg[/tex]

So,

[tex]W=dg\times \dfrac{4}{3}\pi r^3\\\\W=2698.4\times 10\times \dfrac{4}{3}\times \pi \times (0.24)^3\\\\W=1562.53\ N[/tex]

So, the thrust and the force is 1562.53 N.

Answer:

Package's vertical displacement(s) = 22.12 meter

Explanation:

Given:

Speed of plane = 120 m/s

Total distance = 255 m

Find:

Package's vertical displacement(s)

Computation:

Time taken = Distance / Speed

Time taken = Total distance / Speed of plane

Time taken = 255 / 120

Time taken = 2.125 s

Acceleration due to gravity(g) = 9.8 m/s²

Initial velocity (u) = 0

So,

Package's vertical displacement(s) = ut + (1/2)gt²

Package's vertical displacement(s) = (0)(2.125) + (1/2)(9.8)(2.125)²

Package's vertical displacement(s) = 22.12 meter

Answer: -22.1

Explanation:

I just did the Khan Academy and that was the answer, not the one provided by that one person. :)))

Explanation:

A theory is a way of explaining an object or event using a set of facts.

ANSWER:

0.4081%

Explanation:

Difference=24.6-24.5=0.1

Relative error = 0.1/24.5*100=0.4081%

Relative error is equal to the = difference between both the values/The true value *100

Answer:

pressure=force/area

Answer:

Explanation:

Given,

Force ( f ) = 30 N

Acceleration(a) = 7.6 m/s

Now, Let's find the mass of the ball

Using the Newton's second law of motion:

We get:

[tex]force \: = mass \: \times acceleration[/tex]

plug the value

[tex]30 \: = m \: \times 7.6[/tex]

Use the commutative property to reorder the terms

[tex] 30 = 7.6 \: m[/tex]

Swap the sides of the equation

[tex]7.6m = 30[/tex]

Divide both sides of the equation by 7.6

[tex] \frac{7.6 \: m}{7.6} = \frac{30}{7.6} [/tex]

Calculate

[tex]m = 3.94 \: kg[/tex]

Hope this helps..

Best regards!!

Answer:

[tex]\displaystyle \boxed{\mathrm{3.95 \: kg }}[/tex]

Explanation:

[tex]\mathrm{force \: (N) = mass \: (kg) \times acceleration \: (m/s^2)}[/tex]

[tex]\mathrm{force = 30N}[/tex]

[tex]\mathrm{acceleration = 7.6 \: m/s^2 }[/tex]

[tex]\mathrm{Find \: the \: mass.}[/tex]

[tex]\mathrm{30 = m \times 7.6}[/tex]

[tex]\displaystyle \mathrm{m =\frac{30}{7.6} }[/tex]

[tex]\displaystyle \mathrm{m = 3.947... }[/tex]

Answer:

According to super hero logic , nothing will happen to him.

But according to science , yes he will get current shock but good news is that he wouldn't get elected until he is in contact with the wires.

He may / may not be affected but his suit will be damaged for sure as it is made of metal.

HOPE THIS HLEP AND PLSSSSS MARK AS BRAINLIEST AND THNXX :)

Answer:

b. Red light is transmitted through and reflected by the glass

Explanation:

Give me brainliest plz!

All of the wavelengths of the red light are absorbed when it passes through a translucent red glass window, but the red light is transmitted and reflected.

Therefore, the correct answer is option b) Red light is transmitted through and reflected by the glass.

To learn more about light refer to:

https://brainly.com/question/12002703

#SPJ2

Explanation:

Given,

I = 5 A

V = 240 V

T = 25 mins = 1500 sec

Now,

Energy dissipated = IVT= 5×240×1500 = 1800000 J