The half-life of cobalt-60 is 5.3 yr. amount of a 1mg sample of cobalt -60 is left after 15.9 yr period is:
Cobalt-60 has three half-lives over a period of 15.9 years. Cobalt-60 is left behind in amounts of 0.500 mg after one half-life, 0.250 mg after two half-lives, and 0.125 mg after three half-lives.
What is half life of a reaction?
The amount of time it takes for the concentration of a given reactant to reach 50% of its initial concentration is known as the half-life of a chemical reaction.
The time required for a reactant concentration to drop to half that of its original concentration is known as the half-life of a reaction, or t 1/2. Its usage in chemistry and medicine is to forecast changes in a substance's concentration over time.
Cobalt-60 has three half-lives over a period of 15.9 years. Cobalt-60 is left behind in amounts of 0.500 mg after one half-life, 0.250 mg after two half-lives, and 0.125 mg after three half-lives.
To learn more about half life of a reaction from the given link below,
https://brainly.com/question/27682097
#SPJ4
When a forensic analyst determines the chemical composition of a preparation that may contain illicit drugs such as heroin, cocaine, or barbiturates, this is an example of what?.
this is an example of Identification
Technicians in forensic science work at crime scenes and in labs. Typically, forensic science technicians do the following tasks at crime scenes: Investigate crime scenes to decide what evidence needs to be gathered and how. The crime scene and the evidence should both be photographed. In forensic crime labs, forensic DNA analysts perform analyses on samples collected from crime scenes. While some forensic DNA analyzers work for privately owned forensic laboratories, the majority of them are employed by local, state, or federal law enforcement or governmental organizations. The definition of forensic analysis is a thorough procedure for identifying, looking into, and recording the cause, progression, and effects of a security incident or violation of local, state, and organizational regulations.
To know more about forensic analyst refer to https://brainly.com/question/23528771
#SPJ4
Ions and polar molecules can cross the plasma membrane in regions where the membrane has incorporated _____.
Ions and polar molecules can cross the plasma membrane in regions where the membrane has incorporated transport proteins.
The polar molecule is what?
A polar molecule is one that has a slight positive charge on one end and a slight negative charge on the other. A polar molecule is a diatomic compound, such as HF, that contains a polar covalent link.
What are transport proteins?
Transport proteins are integral transmembrane proteins; that is they exist permanently within and span the membrane across which they transport substances. The proteins may assist in the movement of substances by facilitated diffusion or active transport.
To learn more about plasma membrane click on the link below:
https://brainly.com/question/1652796
#SPJ4
A science class is conducting an investigation to see how gravity affects objects of different masses. They drop three balls from the same height. They time how long it takes the balls to hit the ground. What are the students comparing?(1 point)
the height from which each ball is dropped
the height from which each ball is dropped
the time it takes for each ball to fall
the time it takes for each ball to fall
the mass of each ball
the mass of each ball
the gravitational attraction of each ball
the gravitational attraction of each ball
In this experiment, the students are comparing the time it takes for each ball to fall (option B).
What is an experiment?Experiment is a test under controlled conditions made to either demonstrate a known truth, examine the validity of a hypothesis, or determine the efficacy of something previously untried.
According to this question, a science class is conducting an investigation to see how gravity affects objects of different masses. They drop three balls from the same height and time how long it takes the balls to hit the ground.
In this experiment, the masses of the different ball is the independent variable while the time it takes for each ball to fall is the dependent variable.
Therefore, it can be said that the students are comparing the time it takes for each ball to fall.
Learn more about experiment at: https://brainly.com/question/11256472
#SPJ1
1) Explain in as much detail as possible what the following balanced equation tells you. You answer should include information from the state symbols. P4(s) + 5 O₂(g) -> P4O10(S)
The following equation is in balance. To create one molecule of P₄O₁₀ (a solid)., combine one molecule of P₄ (a solid) with 5 molecules of O₂ (a gas)
How do you construct a balanced equation?The reactants and products are placed on the left and right sides of the arrow, respectively, to create a balanced equation. Coefficients, which appear as a number before a chemical formula, represent moles of a compound. The number of atoms in a single molecule is indicated by the subscripts (numbers below an atom).
What is an example of a balanced equation?For instance, think about the response: 2Mg(s)+O₂(g)⟶2MgO(g) Two magnesium and two oxygen atoms are present in this reaction on both the reactant and product sides. As a result, the chemical reaction complies with the rule of conservation of mass, making it a balanced chemical equation.
To know more about Balanced equation visit:
https://brainly.com/question/12192253
#SPJ9
A solution is prepared by dissolving 42.9 g cesium chloride in 60.0 g water. the volume of the solution is 63.3 ml. calculate the mole fraction of cesium chloride.
The mole fraction of cesium chloride is 0.06296.
The mole fraction is the product of the number of molecules of a specific component in a mixture and its total molecular weight.
By mixing 60.0 g of water with 42.9 g of cesium chloride, a solution is created.
The volume of the solution is given as 63.3 ml.
The solute in this aqueous solution is cesium chloride. From their given masses and known molar masses, we require the moles of water and cesium chloride:
n( CaCl ) = 42.9 g × ( mol ) / ( 168.36 g )
n( CaCl ) = 0.254 mol
n( water ) = 60.0 g × ( mol ) / 18.01 g
n( water ) = 3.78 mol
Therefore, the mole fraction of cesium chloride solute will be:
( 0.254 mol ) / ( 0.254 mol + 3.78 mol ) = 0.06296
Learn more about solution here:
https://brainly.com/question/13133789?referrer=searchResults
#SPJ4
what is the average rate of the reaction over the first 580 seconds? 1.6 × 10−3 1.9 × 10−3 2.0 × 10−3 2.2 × 10−3
The average rate of reaction for the first 580 seconds is 2.0 × 10−3 M/s.
What is rate of reaction?The pace at which a chemical reaction occurs is known as the reaction rate, which is proportional to both the increase in a product's concentration per unit time and the decrease in a reactant's concentration per unit time.
There is a wide range in reaction times. As an illustration, the oxidative rusting of iron beneath the Earth's atmosphere is a slow process that can take many years, whereas the burning of cellulose in a fire is a fast process that happens in a matter of seconds. For the majority of reactions, the rate drops as the reaction develops. The pace of a reaction can be calculated by tracking the concentration changes over time.
To learn more about rate of reaction from the given link:
https://brainly.com/question/24795637
#SPJ4
What descriptive term is applied to the type of diene represented by 2,4-hexadiene?.
Conjugated diene is applied to the type of diene represented by 2,4-hexadiene.
what is conjugated diene?
A chain of hydrocarbons known as a diene contains 2 double bonds, which may or may not be close to one another. This section compares two nearby double bonds with an emphasis on the delocalization of π systems. The configurations of these double bonds can influence how reactive and stable a molecule is.
2 double bonds and one single bond divide a conjugated diene into two halves.Nonconjugated (Isolated) Dienes have more least 1 single bond separating two double bonds.Two double bonds that are joined to the same atom to form cumulated dienes.Conjugated dienes are more stable than unconjugated and cumulated dienes because a molecule is more stable when it has a higher electron density delocalized.
To know more about conjugated diene visit:
https://brainly.com/question/24261651
#SPJ4
The complete question is :
What descriptive term is applied to the type of diene represented by 2,4-hexadiene?
A. Cumulated diene
B. Conjugated diene
C. Alkynyl diene
D. Isolated diene
E. None of the above
a chemist has a block of copper metal (density is 8.96 g/ml). they drop the metal into a graduated cylinder containing water, and find the volume change is 2.30 ml. what is the mass of the block, in grams?
The mass of the block is 20.61 grams.
d(copper metal) = 8.96 g/ml; density of a copper metal
V(copper metal) = 2.30 ml; the volume of a copper metal
m(copper metal) = d(copper metal) x V(copper metal)
m(copper metal) = 8.96 ml x 2.30 ml
m(copper metal) = 20.61 g; mass of a copper metal
Volume is the amount of space that a substance occupies.
Density is the mass of an object divided by its volume. The SI derived unit for density is the kilogram/cubic meter, but chemist usually use gram per milimeter.
Mass is a fundamental measure of the amount of matter in the object.
More about density: brainly.com/question/1354972
#SPJ4
Coordination complexes can have different types of isomers. compare the types of isomerism in another pair of related coordination complexes. how are these two complexes related to each other?
Isomers are formed when coordination complexes with two different ligands in the cis and trans positions of a ligand of interest. The octahedral[tex][Co (NH _{3} )_{4} Cl _{2} ] ^{+}[/tex] ion, for example, has two isomers. The two chloride ligands are adjacent to each other in the cis configuration.
Do coordination molecules have various isomers of different types?The isomers that coordination compounds display include many that are distinct as well as the same isomers that organic compounds display. Compounds known as isomers have distinct structural formulas but the same molecular formula and may not always have the same characteristics.
Which two sorts of isomers are there?Stereoisomerism and structural isomerism are the two basic types of isomerism (spatial isomerism). Structural isomers are isomers that differ in structure or kind of bond and have the same number of atoms of each kind but differ in how those atoms are connected to one another.
Learn more about coordination compound here:-
https://brainly.com/question/24315855
#SPJ4
Ls: mitosis and meiosis both produce new cells through cell division. however, the division process differs due to the kind of cell being produced. how is meiosis different from mitosis?
Mitosis produces two genetically identical diploid cells, on the other hand, Meiosis produces four genetically identical haploid cells.
Mitosis: It can be described as the process of division in every living cell. It has four basic stages for division- prophase, metaphase, anaphase, and telophase. The division of cells is based on Asexual Reproduction. The division happens when the nuclear membrane has broken down, and spindle fibers (microtubules) attach to the chromatids at the centromere and pull apart the chromatids. The chromatids reach out to the two separate ends of the cells, then the spindle fibers disintegrate and a nuclear membrane rebuilds around the chromosomes making two nuclei. Both of them are identical to the original nuclei.Meiosis: It is a process of cell division where the daughter cells have half the number of chromosomes as the original cell. In humans, this means that the chromosome reduces from 46 to 23. The joining of both male & female gametes results in restoring chromosomes to 46. In meiosis, homologous chromosomes are separated into different nuclei. Then chromosome number is divided in half. Chromatids are also separated into separate nuclei. Again, it is spindle fibers that “pull” the chromosomes and chromatids apart in meiosis.
To know more about Meiosis & Mitosis, Click here :
https://brainly.com/question/20726356?referrer=searchResults
#SPJ4
Please help me with my chemistry homework
(A) By far the most common isotope of carbon is carbon- 12( 12C), which contains six neutrons in addition to its six protons.
Also there are more Carbon- 12 in atmosphere than Carbon-13 because matter is amended in carbon- 12, because its lighter weight is used in stormy emigrations are amended in carbon- 13. The rate of carbon- 13 to carbon- 12 in the atmosphere and the ocean are roughly the same.
(B) Boron- 11 is more abundant. Boron is linked as titles containing five protons in the nexus. This means that boron- 10 would have five neutrons in the nexus and boron- 11 would have six protons.
(C) Given that isotope of Bromine with the at. mass, 79u has 49.7 composition. And also the isotope of Bromine with the at. mass, 81u hasv50.3 composition.
Since, donation of Bromine- 79 towards the at. mass is
Mass = ( 79 *49.7)/ 100 = 39.263
donation of Bromine- 81 towards the at. mass is
Mass = ( 81 *50.3)/ 100 = 40.743
Average at. mass = 39.2640.74 = 80.0068 amu
(D) The average atomic mass of an element is the sum of the millions of its isotopes, each multiplied by its natural cornucopia( the numeric associated with percent of tittles of that element that are of a given isotope).
To know more about atomic mass here :
https://brainly.com/question/17067547?referrer=searchResults
#SPJ1
Atoms of which elements form bonds without satisfying the octet rule?
O potassium (K) and sodium (Na)
O neon (Ne) and argon (Ar)
• nitrogen (N) and fluorine (F)
• helium (He) and hydrogen (H)
Option (D) helium (He) and hydrogen (H) is the right answer.
The term "chemical compound" refers to a combination of two or more chemical elements, whether they are similar or dissimilar. For instance, the chemical compound H2O is made up of two oxygen atoms and one hydrogen atom.Ionic, covalent, and hydrogen bonds are the three basic types of chemical bonds that are used to generate these chemical compounds from their component atoms.Helium and hydrogen are exceptions to this octet rule because they do not require 8 electrons to finish their while forming the bond with another element, the valence shell.Most elements from the periodic table generally follow the octet rule when forming the bond with the other elements, which is to complete their outermost shell with eight electrons.Hence we can consider that Option(D)helium (He) and hydrogen (H) is the right answer.To learn more about octet rule visit:
https://brainly.com/question/865531
#SPJ9
Answer: Helium, Hydrogen
Explanation: I got it right
convert 360mL of hydrochloric acid into L
What is the theoretical yield of water formed from the reaction of of sulfuric acid and of sodium hydroxide?
The lower value of the calculated amount of water is the theoretical yield and the reactant that is used to calculate the theoretical yield is the limiting reactant. By looking at the calculations, we can say that the theoretical yield of the reaction is ≈1.9 g while the limiting reactant is NaOH.
How are the limiting reactant and theoretical yield determined?The theoretical yield of the reaction is 1.9 g, and the limiting reactant is NaOH.We can do so by converting both reactant masses to moles and then identifying the limiting reactant using one or more mole ratios from the balanced equation. The amount of the limiting reactant can then be used to calculate the theoretical yield of A l C l X 3 ceAlCl3 AlClX3.Multiply the number of moles of water by the water's molar mass. 2 + 16 = 18 g/mol is the molar mass. When multiplied by the product, this gives 0.834 moles H2O x 18 g/mol H2O = 15 grams. The theoretical water yield for this experiment is 15 grams.To learn more about theoretical yield refer to
https://brainly.com/question/6258301
#SPJ4
give the symbol for an element that is 1) a transition metal in the fourth period from the following list: sc, n, nd, mt. fill in the blank 1 2) a metalloid. fill in the blank 2 3) a non-metal in group 4a, 5a, or 6a. fill in the blank 3 4) a lanthanide. fill in the blank 4 5) a metal in group 3a or 4a. fill in the blank 5
From the following list of Sc, N, Nd, Mt
1) Transition metal in the fourth period Sc
2) A metalloid __
3)a non-metal N
4)a lanthanide Nd.
5)a metal in group 3a or 4a __
What are metalloids?
A metalloid is a particular kind of chemical element with a majority of properties that fall between those of metals and nonmetals, or that are a combination of both. There is no agreed-upon definition of a metalloid and no consensus on which elements qualify as metalloids.
A chemical component that results in a straightforward substance with properties that fall somewhere between those of a conventional metal and a typical nonmetal.
To learn more about metalloids click the given link
https://brainly.com/question/6007181
#SPJ4
Why is the bombardier beetle relevant in the evolution vs. creationism discussion? what do you think the bombardier beetle shows us in this debate?
Bombardier beetle is relevant in evolution vs. creationism as creationists use bombardier beetle to challenge evolution whereas scientists say species may have evolved the ability to survive toads’ digestive system.
A subgroup of ground beetles known as bombardier beetles includes several hundred distinct species. To defend themselves from predators, these insects have tools.
When agitated, the beetle uses unique glands in its abdomen to spray a boiling chemical solution onto the face of its predator. Hydroquinone and hydrogen peroxide are combined to create the solution, which they then mix and let loose on their foes.
Even the bombardier beetle could suffer devastating effects from any change to these two substances.
Therefore, evolution is not supposed to occur in a sound manner because it could have disastrous effects and lead to modification instead of modification.
So, while it may be appropriate in a very small number of circumstances, evolution is not appropriate in general.
Learn more about evolution here:
https://brainly.com/question/12271572
#SPJ9
d. Nucleus - storage of nutrients
5. Which laboratory procedure is represented in the diagram
below?
a.
b.
c.
Placing a coverslip over a specimen
Removing a coverslip from a slide
Adding stain to a slide without
removing the coverslip
d. Reducing the size of air bubbles
under a coverslip
6. While viewing a specimen under high power of a compa
be of
Often microscopic examination of a specimen involves many procedures to be followed, from slide preparation to adjust the focal length in the microscope. These steps are of paramount importance for microscopic examinations.
Reducing the size of air bubbles under the coverslip cannot be done easily after the coverslip is put over the specimen. Preferably a needle is used while cautiously putting the coverslip over the specimen to avoid air bubbles. Though adding stains along the edges may work for some time, it is better to do the step of covering with coverslip one again cautiously.
The given picture shows that it is option 4 that seems to be correct than options 1, 2, and 3. We often add stain or solution to a slide without removing the coverslip. Because to prevent air bubble formation and also to reduce excess stain, this method of stain addition is good.
Placing a paper towel to soak up excess liquid is good for the slide to look neat and tidy with even diffusion of stain throughout the coverslip. Thus it makes the observation via microscope very legible and clear with proper light adjustment.
Hence proper microscopic examination and the steps prior to it ( preparation of slides) are of paramount importance for one to excel in this field.
Learn more about microscope here:- https://brainly.com/question/820911
#SPJ9
In a coffee cup calorimetry experiment, what data or information is needed to determine the enthalpy change for a reaction?
In a coffee cup calorimetry experiment the enthalpy change for a reaction Mathematical relation:-q = (specific heat) x m x Δt
What is enthalpy change?The difference between the amount reactant and total product molar enthalpies, computed for substances in their standard states, is the standard enthalpy of reaction for a chemical reaction.
Calorimeters are tools used to determine how much heat is exchanged during chemical reactions. The coffee cup calorimeter and the bomb calorimeter are two popular varieties of calorimeters.
A polystyrene/Styrofoam cup with a cover is used in a coffee cup calorimeter. A thermometer is placed through the lid of the cup after it has been filled with a known amount of water.
The heat produced by a chemical reaction is absorbed by the water. The quantity of heat that has been absorbed or developed is determined using the change in water temperature.
Heat flow is calculated using the following mathematical relation:-q = (specific heat) x m x Δt
where q = heat flow, m=mass in grams, Δt =change in temperature.
to learn more about the enthalpy change go to -
https://brainly.com/question/14047927
#SPJ4
help help help pls pls
Answer:
2
Explanation:
Billy decides to test the factors that affect plant growth. he uses sunflowers, daisies, and bean plants. he gives some of the plants fertilizer and other plants only water. he plants the sunflowers in a garden outside but plants the daisies and bean plants in small containers inside his house. he measures the height of the plants each day using a ruler. what is wrong with billy's experiment?
Billy conducted an experiment to check the growth of different types of plants in different factors. He uses plants like sunflowers, daisies, and bean plants.
He planted the sunflower outside in a garden and plant the daisies and bean plants inside his house in a small container. He provides some of the plants only water and other plants only fertilizers. Then he started measuring the height of the plants everyday using a ruler.
The mistake with the Billy's experiment is that he uses too many manipulated variables. In his experiment he uses too many plants and flowers. Also, he uses fertilizers in only some of the plants and not in others.
Know more about Experiment on Plants: -https://brainly.com/question/16764271
Ammonium sulfide and zinc chloride solutions are mixed. what is the balanced chemical reaction?
Combining zinc chloride and ammonium carbonate aqueous solutions. The chemical process is shown to be balanced as;
(NH₄)2CO₃ (aq ) + ZnCl₂ ( aq ) -------- > ZnCO₃ ( s ) + 2 NH₄Cl (aq )
What is an aqueous solutions?In other words, the ions and molecules that make up the solute (dissolved) are surrounded by the water molecules and incorporated into their web of connections.
The kind of chemical bonds holding something together determines whether or not it will dissolve in water. Examples of watery solutions include rain, seawater, acid, base, and salt solutions.
Solutions that contain water as a solvent are known as aqueous solutions. (For instance, sugar solution).
To learn more about aqueous solutions from the given link:
brainly.com/question/14097392
#SPJ4
Calculate the mass of khc8h4o4 that reacts with 15ml of the 0.15 m naoh solution.
The mass of khc8h4o4 that reacts with 15ml of the 0.15 m naoh solution is 0.4595 g
What is mass?
0.015 L x 0.15 M= 0.00225 mol NaOH, 0.00225 mol NaOH x 1 mol KHC8H4O4/1 mol NaOH=0.00225 KHC8H4O4, 0.00225 KHC8H4O4 x 204.23 g/mol/1 mol
KHC8H4O4=0.4595 g
Mass is a physical body's total amount of matter. Inertia, or the body's resistance to acceleration when a net force is applied, is also measured by this term. The strength of an object's gravitational pull to other bodies is also influenced by its mass. The kilogram serves as the SI's fundamental mass unit.
Therefore,
To learn more about mass from the given link:
https://brainly.com/question/1658757
#SPJ4
Write a balanced half-reaction describing the reduction of aqueous hydrogen cations to gaseous dihydrogen.
2H+(aq) + 2e- --------> H₂(g)
What is balanced half-reaction?In most cases, individual atoms initially balance the half-reactions. The half-reactions contain electrons. These are then balanced to ensure that the number of electrons acquired and lost is equal. The two half-reactions are then combined once more.
A half-reaction is the portion of a larger reaction that corresponds to either an individual oxidation or reduction. A redox reaction can only be accurately represented by two half-reactions, one oxidation and one reduction.
addition of electron is called reduction
2H+(aq) + 2e- ----------------> H₂(g)
to learn more about balanced half-reaction go to -
https://brainly.com/question/24082438
#SPJ4
Suppose you discover a chemical that can block leak potassium channels. what might happen as a result of this blockage?
Suppose you discover a chemical which will block leak potassium channels. Potassium would subsided permeable as a result of this blockage
What is the function of the potassium channel?
Potassium (K+) channels locate in cell membranes and control transportation of K+ ions efflux from and influx into cells. They play crucial roles in both excitable and non-excitable cells and may be found in virtually all species, apart from some parasites
What are the kinds of potassium channels?
There are four main sorts of potassium channels which are as followed: calcium activated, inwardly rectifying, tandem pore domain, and voltage-gated. The differences between these types are mainly with how the gate receives its signal, whereas the structure of those channels is similar.
Learn more about potassium channels:
brainly.com/question/25262015
#SPJ4
What is the molarity of a naoh solution if 15.5 ml of a 0.220 m h2so4 solution is required to neutralize a 25.0-ml sample of the naoh solution?
The molarity of a NaOH solution is 0.273
How do we find the Molarity of NaOH solution?
The molarity of the NaOH solution used in the neutralization reaction has been 0.273 x [tex]10^{-3}[/tex] M.
The neutralization reaction has resulted in the formation of the salt and water on reacting an acid with a base. In the neutralization reaction, the strength of acid and base can be given as
For the neutralization of 1 mole of sulfuric acid, 2 moles of NaOH have been required.
[tex]2NaOH + H2SO4[/tex] →[tex]Na2SO4 + H2O[/tex]
The moles of sulfuric acid can be given as:
Moles = Molarity × Volume
Given, the molarity of acid (H2SO4) = 0.220 M
The volume of acid = 15.5 ml = 0.0155 L
Volume of base (NaOH) = 25 ml = 0.025 L
Moles of H2S04 = 0.220× 0.0155mol
Moles of H2SO4 = 3.41 mol.
Since 1 mole of H2SO4 = 2 moles NaOH
3.14 moles of H2SO4 = 3.14 × 2 moles NaOH
3.14 moles of H2SO4 = 6.28 moles of NaOH.
The neutralization of 0.220 M H2SO4 requires 6.28 moles of NaOH. The strength of the NaOH solution will be:
Molarity =[tex]\frac{Moles}{Volume(L)}[/tex]
Molarity = [tex]\frac{6.28}{0.025}[/tex]
The molarity of a NaOH solution is 0.273
To learn more about Molarity, refer
to https://brainly.com/question/24419453
#SPJ4
French scientist Antoine Lavoisier was one of the first to use an
analytical
to monitor chemical reactions.
O balance
O spectrometer
O thermometer
O chromatogram
French scientist Antoine Lavoisier was one of the first to use an analytical to monitor chemical reactions is an option A. balance.
Antoine Laurent Lavoisier changed into considered the founding father of cutting-edge chemistry. Lavoisier discovered that mass is conserved in a chemical reaction. He also did experiments on combustion and helped devise a chemical nomenclature. Lavoisier, Antoine was a French chemist who proved the law of conservation of mass.
Antoine Lavoisier determined that oxygen changed into a key substance in combustion, and he gave the element its call. He evolved the contemporary machine of naming chemical substances and has been known as the “father of current chemistry” for his emphasis on careful experimentation.
Lavoisier described an element as a chemical substance that can't be decomposed with the usage of present-day analytical methods. Mendeleev noticed a detail as a substance composed of atoms of the identical atomic weight
Learn more about Antoine Lavoisier here:-https://brainly.com/question/11768472
#SPJ1
What is the molarity of a naoh solution if 15.5 ml of a 0.220 m h2so4 solution is required to neutralize a 25.0-ml sample of the naoh solution?
The molarity of NaOH is 0.8 M.
What is Molarity?Molar concentration, also known as molarity, is defined as the number of moles of solute present in a given number of liters of solution, or moles per liter of solution.
The balanced equation for the reaction is;
[tex]2NaOH(aq) + H_{2} SO_{4} (aq) --------- > NaSO_{4} (aq) +2 H_{2} O (l)[/tex]
Moles = concentration x volume
thus;
0.220M x 0.0155L= 0.01 moles of [tex]H_{2} SO_{4}[/tex].
Using the mole ratio;
Moles of NaOH = Moles of [tex]H_{2} SO_{4}[/tex].×2
= 0.02 Moles
Therefore; moles of NaOH = 0.02 moles
But; Concentration = moles / volume
Thus; Concentration of NaOH = 0.02 / 0.025L
= 0.8M
Learn more about mole concentration here:-
https://brainly.com/question/4184101
#SPJ4
which bonds often bind fifferent parts of a moleule into a specific three-dimensional shape, hydrogne, amino acid, oxyeng, or carbon?
The bonds that often bind different parts of a molecule into a specific three-dimensional shape is hydrogen.
What is specific three-dimensional shape?
In geometry, a 3-dimensional form may be described as a strong parent or an item or form that has 3 dimensions—length, width, and height. Unlike two-dimensional shapes, 3-dimensional shapes have height, that is similar to thickness or depth.
The bonds that often bind different parts of a molecule into a specific three-dimensional shape out of hydrogen, amino acid, oxygen and carbon, is hydrogen.
To learn more about specific three-dimensional shape from the given link below,
https://brainly.com/question/24115363
#SPJ4
if a pharmacist dissolves 1.2 g of a medicinal agent in 60 ml of a cough syrup having a specific gravity of 1.20. w hat is the specific gravity (to 3 decimal places) of the product if the addition of the medicinal agent increases the syrup’s volume by 0.2 ml?
Answer:
Mass of medicinal agent taken = 1.2 gthe volume is 60 mL Specific gravity = 1.20 So the mass of solution = specific gravity X volume = 1.20 * 60 = 72gNow if we have increased the volume by 0.2 so the new volume = 60.2 New mass = 72 + 1.2 = 73.2 Specific gravity = mass / volume = 73.2 / 60.2 = 1.22 g/mL.
In wintertime, Jerron is in a room with a furnace.
He builds a fire inside the furnace in order to keep warm.
After 20 minutes, the entire room increased its temperature by 15 degrees.
1. What method of heat transfer occurred?
2. Describe how it worked in the room.
The heat that reaches Jerron in the room from the furnance does so by radiation
What is radiation?The term radiation has to do with a situation in which heat is able to move from one point to another without a material medium. We know that there are three basic modes of heat transfer and these are;
ConductionConvection RadiationConduction and convection both require a medium of propagation while radiation does not. The heat that reaches you in the room does so by radiation and this is because there is no material medium that carries the heat from the furnace to you.
Learn more about radiation:https://brainly.com/question/13934832
#SPJ1