the half-life of technetium-99 is 6.0 hours. how much of a 25.0 mg sample will remain after 24 hours? group of answer choices 1.56 mg 25.0 mg 3.12 mg 6.25 mg 12.5 mg

Matter moves outside of a plant primarily through the process of transpiration.

Transpiration is the process by which water and other dissolved nutrients are transported from the roots of the plant to the leaves, where they are used for photosynthesis and other metabolic processes.

During this process, water is lost from the leaves through tiny pores called stomata, which allows for the exchange of gases (such as oxygen and carbon dioxide) and the release of excess water in the form of vapor.

This process helps to regulate the water balance of the plant and plays an important role in maintaining the health and growth of the plant.

For more question on transpiration click on

https://brainly.com/question/2951421

#SPJ11

When the reaction reaches equilibrium, the concentrations of each species will depend on the reaction's equilibrium constant (K). If K is large, the reaction will favor the products and the product concentrations will be higher than the reactant concentrations. If K is small, the reaction will favor the reactants and the reactant concentrations will be higher than the product concentrations.

The reaction in question is:

POF3 + O2 ⇌ PF3 + O3

Assuming that the reaction is at standard conditions and that K is relatively small, we can rank the species in order from the lowest to highest concentration at equilibrium:

1. O3
2. PF3
3. POF3
4. O2

At equilibrium, O3 will have the lowest concentration because it is a product and the reaction favours the reactants. PF3 will have a higher concentration than O3 because it is also a product, but it has a higher concentration than O3 due to its stoichiometry in the reaction. POF3 will have a higher concentration than PF3 because it is a reactant and the reaction favours the reactants. Finally, O2 will have the highest concentration because it is a reactant and has not been consumed in the reaction.

To know more about Equilibrium Constant visit:

https://brainly.com/question/30620209

#SPJ11

Answer:

The direction of the force it would exert on a positive charge.

Explanation:

The direction of an electrical field at a point is the same as the direction of the electrical force acting on a positive test charge at that point.

Hope this helps!! :)

The number of degrees that 340 J will raise temperature of 6. 8 g of water is 12°C.

So the answer is option A.

The specific heat capacity of water is 4.184 J/g·°C, so to determine how many degrees 340 J will raise the temperature of 6.8 g of water, you can use the formula:

ΔT = Q / (m × c)

where:

ΔT = change in temperature

Q = heat energy

m = mass of the substance

c = specific heat capacity of the substance

Plugging in the given values:

Q = 340 J

m = 6.8 g

c = 4.184 J/g·°C

ΔT = 340 J / (6.8 g × 4.184 J/g·°C)

ΔT ≈ 12.16°C

Hence, the answer is A. 12°C.

Learn more About heat capacity at:

https://brainly.com/question/29119255

#SPJ11

The molarity of the solution is 1.4 M, calculated by dividing the number of moles of solute (0.35) by the volume of the solution in liters (0.25).

Molarity (M) is a unit of concentration that expresses the number of moles of solute dissolved in one liter of solution. To calculate the molarity of a solution, you need to know the number of moles of solute and the volume of the solution in liters.

In this case, the solution contains 0.35 moles of solute and has a volume of 250 ml. To convert the volume to liters, you need to divide it by 1000 ml/L, which gives:

250 ml / 1000 ml/L = 0.25 L

Now, you can use the formula for molarity:

M = moles of solute/liters of solution

Substituting the values, you get:

M = 0.35 moles / 0.25 L = 1.4 M

Therefore, the molarity of the solution is 1.4 M.

To learn more about molarity

https://brainly.com/question/13386686

#SPJ4

The flow of thermal energy will gradually decrease.

The flow of thermal energy will gradually reduce when Aiden unintentionally turns the oven off after placing the turkey inside. Heat will move from the hotter turkey to the colder oven since the turkey will start out at a greater temperature than the oven. Thermal energy will keep moving until the temperatures are equal.

The internal temperature of the oven will begin to drop toward the surrounding room temperature over time if it is not being actively heated. The cooled oven and the space itself, as well as the turkey, will start to lose heat from the bird. The oven will still be warmer than the room, though, because it was initially prepared to a higher temperature.

Learn more about thermal energy:https://brainly.com/question/3022807

#SPJ1

The pH of the solution is approximately 4.63.

To find the pH of a solution containing a weak base and its conjugate weak acid,

we can use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]).

First, we need to calculate the pKa from the given Ka value:

pKa = -log(Ka) = -log(7.2 × 10^-8) ≈ 7.14.

Next, we have the concentrations of the weak base ([A-] = 0.041 M) and the conjugate weak acid ([HA] = 0.053 M).

Now, we can plug these values into the Henderson-Hasselbalch equation: pH = 7.14 + log(0.041/0.053) ≈ 4.63. Therefore, the pH of the 75.0 mL solution which is 0.041 M in a weak base and 0.053 M in the conjugate weak acid is approximately 4.63.

To know more about weak base visit:

https://brainly.com/question/30893367

#SPJ11

Using the Henderson-Hasselbalch equation, the pH of a solution with a weak base (0.041M) and its conjugate weak acid (0.053M) with a Ka of 7.2 x 10^-8 is calculated to be approximately 6.98.

First, we can make use of the Henderson-Hasselbalch equation that is given by pH = pKa + log([A-]/[HA]), where [A-] is the molarity of the weak base, [HA] is the molarity of the conjugate weak acid and pKa = -log(Ka).

Substituting the given values, we have pKa = -log(7.2 × 10−8) = 7.14. Therefore, the pH = 7.14 + log(0.041/0.053).

After performing the calculation, we get the pH to be approximately 6.98.

So, the pH of the solution containing the weak base and its conjugate weak acid equals 6.98.

https://brainly.com/question/34432529

60.68 MeV per nuclide is the binding energy of a Fe-2656 nuclide calculated by Einstein's equation .

The binding energy of a Fe-56 nuclide can be calculated using the Einstein's famous equation [tex]E=mc^{2}[/tex]. The difference in mass between the Fe-56 nuclide and the sum of the masses of its constituent particles (protons and neutrons) gives us the mass defect, which is then converted into energy using the equation E=mc².
The experimental mass of a Fe-56 atom is given as 55.9349 amu. The mass of 56 protons and neutrons is (56 x 1.66054 x 10⁻²⁷ kg)/1.66054 x 10⁻²⁷ kg/amu = 56 amu. Therefore, the mass defect is 56 - 55.9349 = 0.0651 amu.
Converting the mass defect into energy using E=mc², we get:
E = (0.0651 amu) x (931.5 MeV/c² per amu) = 60.68 MeV
Therefore, the binding energy of a Fe-56 nuclide is 60.68 MeV per nuclide.

Learn more about binding energy here

https://brainly.com/question/30707607

#SPJ11

The carbonate ion (CO3^2-) has three resonance configurations. Resonance refers to the delocalization of electrons within a molecule or ion, resulting in multiple possible arrangements of electron distribution.

In the case of the carbonate ion, the three resonance structures arise due to the redistribution of the double bonds and electron lone pairs within the ion.

In the first resonance structure, one of the oxygen atoms holds a double bond with the central carbon atom, while the other two oxygen atoms have single bonds and carry a negative charge each. In the second resonance structure, the double bond shifts to another oxygen atom, and the charges are rearranged accordingly. The third resonance structure is similar to the first, but the double bond is shifted to the remaining oxygen atom.

These three resonance structures contribute to the overall description of the carbonate ion, with the actual structure being a hybrid of these configurations. The resonance allows for electron delocalization, enhancing the stability of the carbonate ion.

learn more about "resonance ":- https://brainly.com/question/29298725

#SPJ11

The ball-and-stick model and chemical structure provide a more complete picture of the structure and properties of a molecule than its formula alone, making them important tools in the study of chemistry and biochemistry.

The ball-and-stick model and chemical structure provide information about the spatial arrangement of atoms in a molecule, which cannot be inferred from its chemical formula alone. The ball-and-stick model represents each atom in the molecule as a ball or sphere, and the bonds between atoms as sticks or lines.

The lengths and angles of the sticks provide information about the bond lengths and bond angles in the molecule, which are important factors in determining its properties. In addition, the chemical structure provides information about the stereochemistry of the molecule, which refers to the arrangement of atoms and bonds in three-dimensional space.

Stereochemistry is crucial in determining the biological activity of many molecules, as different stereochemical isomers can have vastly different properties. The chemical structure also provides information about the functional groups present in the molecule, which can affect its reactivity and interactions with other molecules.

To learn more about chemical structure

https://brainly.com/question/14481803

#SPJ4

The sigma bond between carbon (C) and nitrogen (N) in hydrogen cyanide (HCN) is formed by the overlap of the sp hybrid orbital on C and the sp hybrid orbital on N.

In HCN, the carbon atom is sp hybridized and forms two sigma bonds: one with hydrogen (H) and the other with nitrogen (N). The sp hybrid orbital of carbon is formed by mixing one s orbital and one p orbital, and the sp hybrid orbital of nitrogen is formed by mixing one s orbital and one p orbital.

The overlap of the sp hybrid orbital on C and the sp hybrid orbital on N forms a strong sigma bond between the two atoms. The lone pair on nitrogen occupies the remaining sp hybrid orbital, which is oriented perpendicular to the plane of the sigma bond.

Learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ11

The equilibrium constant for this reaction at 100°C is 5.01 x 10^8. This value indicates that the reaction strongly favors the products at equilibrium.

The equilibrium constant for a reaction can be calculated using the following equation:

ΔG° = -RTlnK

here ΔG° is the standard free energy change, R is the gas constant, T is the temperature in Kelvin, and K is the equilibrium constant.

In this case, we know that ΔG° = -41.8 kJ and the temperature is 100°C, which is 373 K.

First, we need to convert ΔG° from kJ to J:

ΔG° = -41.8 kJ * 1000 J/kJ = -41,800 J

Next, we can plug in the values we know into the equation and solve for K:

-41,800 J = -8.314 J/mol*K * 373 K * lnK

lnK = 20.036

K = e^20.036

K = 5.01 x 10^8

Therefore, the equilibrium constant for this reaction at 100°C is 5.01 x 10^8. This value indicates that the reaction strongly favors the products at equilibrium.

For more such questions on equilibrium

https://brainly.com/question/3159758

#SPJ11

The element/ion that is the easiest to reduce can be determined by referring to the given activity series. Among the options the element/ion  is the easiest to reduce is H₂ (g) to 2H⁺ (aq) + 2e⁻. Option C is correct.

The activity series represents the relative ease with which elements or ions can be oxidation or reduced. In the given activity series, H2 (g) is listed before Sn (s), Pb (s), and Cu (s), indicating that it is more easily reduced than these elements. When H₂ gas is reduced, it loses electrons to form 2H⁺ ions, and the electrons released in the reduction process are represented by 2e⁻. This indicates that H₂ has a higher tendency to undergo reduction compared to the other elements listed.

Therefore, based on the provided activity series, H₂ is the easiest to reduce among the given options.

Learn more about oxidation here

https://brainly.com/question/32341973

#SPJ11

The best estimate for the amount of energy released in this hypothetical nuclear decay process is approximately 1.503 x 10^-10 joules.

The amount of energy released in a nuclear decay process can be calculated using Einstein's famous equation:

E = mc^2

where E is the energy released, m is the mass that is transformed, and c is the speed of light.

In this hypothetical nuclear decay process, the mass of one proton is transformed into energy. The mass of a proton is approximately 1.0073 atomic mass units (amu) or 1.6726 x 10^-27 kg. Using this value for m, and the speed of light, c = 299,792,458 m/s, we can calculate the energy released:

E = (1.6726 x 10^-27 kg) x (299,792,458 m/s)^2

E = 1.503 x 10^-10 joules

For more question on energy click on

https://brainly.com/question/5650115

#SPJ11

Approximately 1.21 moles of magnesium will be produced when 7.3 x 10^23 atoms of magnesium react with excess iron (III) chloride.

To determine the number of moles of magnesium produced, we need to first identify the balanced chemical equation for the reaction between magnesium and iron (III) chloride. Let's assume the balanced equation is:

2 Mg + 3 FeCl3 -> 2 MgCl2 + 3 Fe

According to the balanced equation, 2 moles of magnesium react with 3 moles of iron (III) chloride to produce 2 moles of magnesium chloride and 3 moles of iron.

Now, we have 7.3 x 10^23 atoms of magnesium. To convert this to moles, we need to divide by Avogadro's number, which is approximately 6.022 x 10^23.

Number of moles of magnesium = (7.3 x 10^23) / (6.022 x 10^23)

Number of moles of magnesium ≈ 1.21 moles

Therefore, approximately 1.21 moles of magnesium will be produced when 7.3 x 10^23 atoms of magnesium react with excess iron (III) chloride.

To know more about Iron (III) chloride click this link -

brainly.com/question/14366133

#SPJ11

. Propanamide is an organic compound with the molecular formula C3H7NO. It is a primary amide, which means it contains a carbonyl group (C=O) attached to an amino group (NH2) on a primary carbon atom (i.e., the carbon atom directly attached to the nitrogen atom).

Propanamide is a colorless to pale yellow liquid at room temperature and is commonly used as a solvent in the production of polymers, pharmaceuticals, and other industrial products.

b. 2-Aminopropanoic acid, also known as Alanine, is an α-amino acid with the molecular formula C3H7NO2. It is a nonpolar amino acid, which means it has a hydrophobic side chain (methyl group) and is commonly found in the interior of proteins. Alanine is important in protein synthesis and is also a source of energy for muscle tissues during exercise.

c. 2-Aminoethanoic acid, also known as Glycine, is an α-amino acid with the molecular formula C2H5NO2. It is the simplest amino acid and is the only one that is not optically active because its R-group is a hydrogen atom. Glycine is an important neurotransmitter in the central nervous system and is also used in the synthesis of proteins, purines, and heme.

d. Butanamide, also known as Butyramide or Butyramine, is an organic compound with the molecular formula C4H9NO. It is a primary amide that is commonly used as a precursor in the production of various chemicals and pharmaceuticals. Butanamide can be synthesized from butyric acid, which is a fatty acid found in milk, butter, and cheese. It is also found in some plant extracts and is a metabolite of the neurotransmitter GABA.

Learn more about Propanamide here:

https://brainly.com/question/28233707

#SPJ11

The given reaction involves the compound cn nh2NH2. To perform this reaction, the necessary reagents are:

C) LiAlH4, H20

LiAlH4 (lithium aluminum hydride) is a strong reducing agent that is capable of reducing the carbonyl group (C=O) present in cn nh2NH2 to a primary alcohol (C-OH) by adding a hydride (H^-) ion. The resulting compound is then hydrolyzed (reaction with water) to give the desired product.

Option A) H20, H+ and B) H20, OH are not suitable reagents as they will not reduce the carbonyl group to a primary alcohol.

Option D) DIBAL-H, H20 (diisobutylaluminum hydride) is a milder reducing agent compared to LiAlH4 and is used for selective reduction of carbonyl groups to aldehydes. It may also cause over-reduction to form primary alcohols, which is not desired in this case.

Option E) CH3 MgBr, H20 (methyl magnesium bromide) is a Grignard reagent that is used for nucleophilic addition reactions. It may react with the carbonyl group to form a tertiary alcohol, which is not the desired product in this case.
Hi! To perform the reaction where you convert a nitrile (CN) to a primary amine (NH2), you would need the following reagents:

Your answer: C) LiAlH4, H2O

LiAlH4 (lithium aluminum hydride) is a strong reducing agent that converts nitriles to primary amines, and H2O is used to quench the reaction.

To know more about lithium aluminium hydride visit:

https://brainly.com/question/30298974

#SPJ11

In the realm of organic chemistry, a cyano group (CN) can be transformed into an amine group (NH2) using a powerful reducing agent named lithium aluminium hydride (LiAlH4), typically in water. Therefore, the correct choice, in this case, is option C, LiAlH4 and H20. This conversion is a two-step process involving an intermediate imine step.

The student appears to be asking about a reagent suitable for a particular chemical reaction: converting a cyano (CN) group to an amino (NH2) group. This is a topic related to organic chemistry.

The correct reagent for this transformation is generally LiAlH4 (lithium aluminium hydride) in water (H20). So, the correct choice is option C). This substance is a powerful reducing agent known for its ability to convert cyano groups into amino groups.

Please note that this reagent is used in a two-step process:

https://brainly.com/question/35157785

#SPJ11

After 90 years, there is 2 kg of the radioactive sample remaining.

The half-life of a radioactive substance is the time it takes for half of the original quantity to decay. Since the half-life of the given substance is 30 years, we can use the following formula to determine the amount of substance remaining after a certain time:

N(t) =[tex]N * (1/2)^{(t/T)[/tex]

here N(t) is the amount remaining after time t, N is the initial amount, T is the half-life, and the (^) symbol denotes exponentiation.

Substituting the given values, we get:

[tex]N(90) = 16 * (1/2)^{({90/30)\\N(90) = 16 * (1/2)^3[/tex]

N(90) = 16 * 1/8

N(90) = 2 kg

Therefore, after 90 years, there is 2 kg of the radioactive sample remaining.

Learn more about radioactive visit: brainly.com/question/9932896

#SPJ4

When in a particular titration, 5.0 ml of a 2.0 m NaOH(aq) solution exactly neutralizes 10.0 ml of an HCl(aq) solution. The concentration of the HCl (aq) solution is found to be 1M.

The balanced chemical equation is given as,

NaOH  + HCl → NaCl  +  H₂O

Number of moles of NaOH  =  molarity × volume /1000

=  5 x 2/1000  =  0.01  moles

With the help of mole ratio between NaOH to HCl which is 1 : 1

Number of moles of HCl given = 0.01 moles

Therefore, concentration = moles/volume x 1000

                                           = 0.01/10 x 1000 = 1M

Hence, the concentration of the HCl (aq) solution is 1M.

Learn more about concentration from the link given below.

https://brainly.com/question/31271061

#SPJ4

The mass of moles of one mole of potassium permanganate is 170.6 g.

The number of moles of one mole of potassium permanganate is calculated as folows;

The molecular formula of  potassium permanganate is written as;

potassium permanganate = KMnO₄

K = potassium = 39 g/mol

Mn = Manganese = 55 g/mol

O = oxygen = 16

The molecular formula of  potassium permanganate is calculated as follows;

KMnO₄ = 39 + 55 + 4 (16)

KMnO₄ = 158 g/mole

One mole = 158 g/mol x  1 mole/1 = 158 g

1 mole ------- > 158 g

1.08 mole ------- ?

= 1.08 x 158 g

= 170.6 g

Learn more about molar mass here: https://brainly.com/question/837939

#SPJ1

The coordination number of the Au atom in K[Au(CN)2(SCN)2] is 4.

In the complex ion K[Au(CN)2(SCN)2], the central metal atom is gold (Au). The coordination number represents the number of ligands (atoms, ions, or molecules) that are attached to the central metal atom in a coordination compound. In this case, the ligands are CN- and SCN-, and each ligand forms a coordinate covalent bond with the central Au atom.

There are two CN- ligands and two SCN- ligands in the complex ion, making a total of 4 ligands bonded to the Au atom. Therefore, the coordination number of the Au atom in K[Au(CN)2(SCN)2] is 4. This number reflects the number of sigma bonds formed between the ligands and the central metal atom, providing valuable information about the geometry and structure of the coordination compound.

To know more about the covalent bond visit:

https://brainly.com/question/30388736

#SPJ11

Changing the mass of the acid used in the experiment would not affect the Ka value. it's worth noting that if the experimental conditions were altered along with the increase in acid mass.

If you weighed out more than 1.2 g of your unknown acid, the final calculated Ka (acid dissociation constant) would likely be the same as the value determined in the experiment, assuming the conditions and methodology remain constant.

The Ka value represents the equilibrium constant for the dissociation of the acid in water, which is a characteristic property of the acid itself. It is independent of the amount of acid present in the solution. Therefore, changing the mass of the acid used in the experiment would not affect the Ka value.

In acid-base experiments, the concentration of the acid is typically used to calculate the Ka value. Concentration is defined as the amount of substance per unit volume. In this case, if you weigh out more than 1.2 g of the acid, you would dissolve it in a larger volume of solvent to maintain the same concentration. This would ensure that the ratio of acid to water remains constant, and the equilibrium constant, Ka, would not change.

However, it's worth noting that if the experimental conditions were altered along with the increase in acid mass, such as using a different volume of water or altering the temperature, it could potentially impact the calculated Ka value. In such cases, it would be important to consider the specific details of the experiment to determine the potential effects on the final calculated Ka.

To know more about acid refer to

https://brainly.com/question/29796621

#SPJ11

To find the new volume of the ideal gas, you can use the combined gas law formula, which relates the initial and final states of the gas:

(P1 * V1) / T1 = (P2 * V2) / T2

where P1 is the initial pressure (3.50 atm), V1 is the initial volume (45.0 L), T1 is the initial temperature (288 K), P2 is the final pressure (9.00 atm), V2 is the final volume, and T2 is the final temperature (373 K).

Rearrange the formula to solve for V2:

V2 = (P1 * V1 * T2) / (P2 * T1)

Now, plug in the given values:

V2 = (3.50 atm * 45.0 L * 373 K) / (9.00 atm * 288 K)

V2 = (5812.5) / (2592)

V2 ≈ 22.42 L

The new volume of the ideal gas is approximately 22.42 liters.

For more question like volume of the ideal gas visit the link below:

https://brainly.com/question/11676583

#SPJ11

According to Le Chatelier's Principle a system that is in equilibrium will shift in a way that tends to counteract any externally imposed changes and bring about equilibrium.

According to Le Chatelier's Principle a reaction will shift in response to temperature changes. If a reaction is exothermic meaning that heat is released, then raising the temperature will cause the equilibrium to move to the left, towards the reactants in order to absorb the extra heat. In contrast, if the temperature is lowered the equilibrium will move to the right toward the products. In an effort to produce more heat to make up for the loss.

However if a reaction is endothermic, which means it absorbs heat, then raising the temperature will cause the equilibrium to shift to the right towards the products in order to absorb more heat to make up for the rise. The equilibrium will move to the left, towards the reactants as the temperature drops, allowing some of the heat to be released to make up for the drop.

Learn more about Le Chatelier's Principle at:

brainly.com/question/29009512

#SPJ1

The net ionic equation for the reaction that occurs when aqueous solutions of KHCO3 and HBr are mixed is:
H+(aq) + HCO3-(aq) + Br-(aq) → H2O(l) + CO2(g) + K+(aq) + Br-(aq)


The first step in writing a net ionic equation is to write the balanced chemical equation for the reaction. In this case, when aqueous solutions of KHCO3 and HBr are mixed, they react to form water, carbon dioxide, and the ionic compound KBr:
KHCO3(aq) + HBr(aq) → KBr(aq) + CO2(g) + H2O(l)
Next, we need to break down the ionic compounds into their respective ions and remove any spectator ions. Spectator ions are those that do not participate in the reaction. In this case, KBr is a soluble salt, which means it dissociates into K+ and Br- ions in solution. These ions are not involved in the reaction and can be removed:
KHCO3(aq) + H+(aq) + Br-(aq) → CO2(g) + H2O(l) + K+(aq) + Br-(aq)
Finally, we can write the net ionic equation by removing the spectator ions, which are the K+ and Br- ions:
H+(aq) + HCO3-(aq) + Br-(aq) → CO2(g) + H2O(l)
Therefore, the net ionic equation for the reaction that occurs when aqueous solutions of KHCO3 and HBr are mixed is:
H+(aq) + HCO3-(aq) + Br-(aq) → CO2(g) + H2O(l)

To know more about aqueous solutions visit :

https://brainly.com/question/26856926

#SPJ11

I2(s) +Zn2 (aq) + H₂O→ IO−3(aq) +Zn(s) + 2H+ is balanced redox reaction.

Define Redox reactions

Redox reactions, also referred to as oxidation-reduction processes, are reactions in which electrons are transferred from one species to another. An oxidised species is one that has lost electrons, whereas a reduced species has gained electrons.

Any chemical reaction in which the oxidation number of a molecule, atom, or ion changes by acquiring or losing an electron is referred to as an oxidation-reduction reaction. Some of the fundamental processes of life, such as photosynthesis, respiration, combustion, and corrosion or rusting, depend on redox reactions.

To learn more about Redox reactions use:

https://brainly.com/question/21851295

#SPJ4

The connection between the reactant and product concentrations at equilibrium is expressed by the equilibrium constant or K value. An equilibrium product concentration greater than the reactant concentration is indicated by a K value greater than 1. Option 3 is correct.

The present concentration of the reactants is greater than the concentration of the products when Q is less than 1. In order to reach equilibrium and boost the product concentration, the reaction must go to the right.  Because the concentration of the products is already greater than the concentration of the reactants, the reaction is not in equilibrium and cannot move to the leftThe correct option is 3.

To know more about equilibrium, here

brainly.com/question/30807709

#SPJ1

In the balanced equation for the given reaction under basic conditions, there will be 2 hydroxide ions appearing on the left side. The correct answer is (c) 2 on the left.

When a reaction occurs under basic conditions, hydroxide ions (OH-) are involved in the chemical process. They act as a base, accepting protons (H+) to form water molecules (H2O). In this reaction, the hydroxide ions are responsible for oxidizing the zinc metal to zinc ions.

The balanced equation for the reaction is as follows:

2Ag(s) + 2OH-(aq) + Zn2+(aq) ? Ag2O(s) + Zn(s) + H2O(l)

In this equation, two hydroxide ions (OH-) appear on the left side, indicating their involvement as part of the base in the reaction. They react with the zinc ions (Zn2+) to form water (H2O) and facilitate the reduction of silver ions (Ag+) to silver oxide (Ag2O).

Therefore, there are 2 hydroxide ions on the left side of the balanced equation, and the correct answer is (c) 2 on the left.

Know more about Hydroxide ion here:

https://brainly.com/question/14619642

#SPJ11

After 30.0 days, only 14.6% (or 0.146) of the initial sample of 13153I remains.

This is because the half-life of 13153I is relatively short, so a large portion of the material decays within a short amount of time. For radioactive decay: N(t) = N0 * (1/2)^(t/T1/2), where N(t) is the amount of radioactive material at time t, N0 is the initial amount of radioactive material, and T1/2 is the half-life of the material.

In this case, the initial amount of 13153I is 100% (or 1.00), since we are looking for the percentage that remains. We also know that the half-life of 13153I is 8.04 days. Therefore, we can plug in these values and solve for N(30):  N(30) = 1.00 * (1/2)^(30/8.04) = 0.146

To know more about radioactive decay visit :-

https://brainly.com/question/14394731

#SPJ11

The difference in electronegativity between their constituent atoms create a polar molecule, leading to dipole-dipole interactions between the solute and solvent. Thus, answer B: [tex]PH_{3}[/tex] and [tex]NH_{3}[/tex] is correct.

In a solution, the solute is the substance that gets dissolved, while the solvent is the substance that does the dissolving. Intermolecular forces are the forces between molecules that hold them together in a solution.
For option A, PH3 and F2 are both nonpolar molecules, so the interaction between them would be dispersion forces, not dipole-dipole forces.Option B, PH3 and NH3, is the correct match. Both molecules are polar due to the difference in electronegativity between their constituent atoms, leading to dipole-dipole interactions between the solute and solvent.Option C, [tex]CH_{2} F_{2}[/tex]   and [tex]CH_{2}O[/tex] involves two polar molecules, but hydrogen bonding is not possible here as hydrogen is not directly bonded to a highly electronegative atom (such as oxygen, nitrogen, or fluorine) in both molecules.Lastly, option D, [tex]CH_{2}F_{2}[/tex] and [tex]PH_{3}[/tex], involves a polar molecule [tex]CH_{2}F_{2}[/tex] and a nonpolar molecule [tex]PH_{3}[/tex]. This would lead to dipole-induced dipole interactions, not dipole-dipole interactions.

Learn more about electronegativity here:

https://brainly.com/question/17762711

#SPJ11