the half-life of the reaction in trial 4 is less than the half-life in trial 1. explain why, in terms of activation energy.

The empirical formula of hydroxylamine is Nitrogen 1, Hydrogen 3 and oxygen 1 (N1H3O1).

To find the empirical formula, we must first figure out the amount of oxygen present, which is equal to 100 minus the percentages of nitrogen and hydrogen present. Combining the values gives us the following outcome: The amount of oxygen present is expressed as 100 minus 42.41 and 9.15, which equals 48.44. Nitrogen is 42.41, contains 9.15 percent hydrogen, and has 48.44 percent oxygen. The smallest amount will be shared. When divided by 3.0275 and 3.0229, respectively, the least nitrogen value will equal nearly 1, which is nitrogen. 9.15 divided by 3.0275 = 3, and 3.0275 divided by 3.0275 equals 1 for oxygen and hydrogen. The nitrogen concentration in this instance is 1. 3. 1 points are needed to compare hydrogen to oxygen.

Learn more about nitrogen here:

https://brainly.com/question/16711904

#SPJ4

Answer:

The chemical formula for the ionic compound is

Na3N3

Chemical reaction - 0.823 grams O2 could be produced from 2.45 g of ko2 and 4.48 g of CO_2

What is Chemical reaction?

Chemical reactions happen absolutely everywhere. While we sometimes associate chemical reactions with the sterile environment of test tubes and laboratories, nothing is farther from the truth. In fact, a vast number of transformations are creating a dizzying and almost incomprehensible series of new matter and energy changes in our world every second of every day. In nature, chemical reactions can be much more difficult to control and in some cases much more complex than in the laboratory, and generally occur whether you want it or not!In the woods A raging fire, the slow rusting process of iron over the years in the presence of oxygen and water, or the delicate ripening of fruit on a tree, the transformation of various chemicals, etc... (reactants ) into another group of substances (products) is a so-called chemical reaction.

Moles KO2 = 2.44g/(71.1g/mole) = 0.034 moles

Moles CO2 = 4.45g/(44g/mole) = 0.10 moles

4KO2 + 2CO2 —> 2K2CO3 + 3O2

The reaction requires twice as many moles of KO2 than moles of CO2.  That means 0.10 mole of CO2 would consume 0.20 moles of KO2.  But we only have 0.034 moles of KO2, so the limiting reagent is KO2.  

There are 3 moles of O2 produced for every 2 moles of CO2 consumed.  In this case we'll assume all of the KO2 reacts, so that should result in (3/4) * (0.034moles) = 0.025 moles of O2 .

To get the mass, 0.025 mole * (32g/mole) = 0.823 grams O2

To learn more about Chemical reaction , click the link below ;
https://brainly.com/question/11231920
#SPJ4

Answer:

Afferent or sensory neurons

Explanation:

They collect stimuli received by receptors throughout the body, including the skin, eyes, ears, nose, and tongue as well as pain and other receptors in the internal organs. Sensory information is transmitted to the central nervous system, which includes the brain and spinal cord.

Sample X is best classified as a heterogeneous mixture

Homogenous mixture has the same uniform composition and appearance through out the reaction and it is difficult to separate the substrates present in it.

A heterogeneous mixture contains of visibly  different phases or substances. Here separating the mixture becomes easy.

In the given question When sample X is passed through the filter paper we see that a white residue is remaining which is Y. This itself suggests that the the mixture is heterogeneous mixture.

As we initially got the residue it suggests that the solution is a homogenous mixture as we can now differentiate two substances

To know more about heterogenous mixtures

https://brainly.com/question/24898889

#SPJ1

Answer:

The chemical compound responsible for ocean acidification in the open oceans of the world is carbon(II) oxide

The chemical compound responsible for ocean acidification in the open oceans of the world is carbon(II) oxide.

Ocean acidification is the global decrease in seawater pH caused by the oceans' extensive uptake of atmospheric carbon dioxide (CO2) in the atmosphere. Ocean acidification is primarily caused by the Earth's atmosphere being overburdened with massive amounts of CO2, which is created by automobiles, industrial processes, and agricultural activities.

A third to a half of the CO2 produced into the atmosphere by human activity since the start of the Industrial Revolution, or around 1750, is being absorbed by the oceans. Scientists believe that at that time, seawater's average pH decreased between 8.19 to 8.05, representing a 30% increase in acidity. The chemical compound responsible for ocean acidification in the open oceans of the world is carbon(II) oxide.

Therefore, the chemical compound responsible for ocean acidification in the open oceans of the world is carbon(II) oxide.

To know more about ocean acidification, here:

https://brainly.com/question/15611772

#SPJ1

This is closely related to pi bonds in double and triple bonds prevent these bonds from rotating.

This rigidity has an effect on the physical structure of compounds and can influence chemical reactivity. Here double bonds contain pie orbitals, they are not free to rotate.

To know more about pi bonds click here:

https://brainly.com/question/13243902

#SPJ4

The element that is present in group 2 and period 6 of the periodic table is Barium. The number of electrons here is 56, proton is 56 and neutron is 81.

Periodic table is  systematic  arrangement of the all the known elements, where the elements are arranged in the order of their atomic number. This table helps the for quick understanding of individual properties such as as their mass, electron number, electron configuration and their unique chemical properties.

The columns of the periodic table are called the  groups. There are 18 groups in total. Members of the same group in the table have the same number of electrons in the outermost shells of their atoms and form bonds of the same type.

The horizontal rows are called periods. Periods represents to the relationship of orbitals, or likely areas in which electrons will be found, inside the outermost shell of the atom. As we go down the period the more of electron cloud around the nucleus increases. There are total 7 periods in the periodic table.

If we read the periodic table then we will understand that the element which is present in group 2 and period 6 with atomic weight 137.33 is Barium. As the atomic number of Barium is Z=56 so Np=Ne=56. remaining is 81 which is the number of neutrons.

To know more about periodic table

https://brainly.com/question/11155928

#SPJ1

The missing component in the nuclear equation is  [tex]{{0} \atop {-1}} \right.[/tex]e.

Nuclear reactions are processes in which one or more nuclides are produced from the collisions between two atomic nuclei or one atomic nucleus and a subatomic particle. The nuclides produced from nuclear reactions are different from the reacting nuclei (commonly referred to as the parent nuclei).

In the given reaction in order to balance the reaction we can see that their mass numbers are same so the difference between them is = 0, and the difference in their atomic number is  91-90 = 1, hence the component is the [tex]\beta[/tex] particle that is formed.

This type of nuclear reaction is know as [tex]\beta[/tex]decay nuclear reactions

To know more about nuclear reactions

https://brainly.com/question/27268947

#SPJ1

One of the first ten compounds, carbon tetrachloride, is used in a variety of industrial manufacturing processes as well as in consumer products such as paints, adhesives, degreasers, and other things.

An organic molecule called carbon tetrachloride is made up of a core carbon atom that is encircled by four chlorine atoms arranged in a tetrahedron. Because of its extremely low melting point, it is found as a colorless liquid at ambient temperature. It has a wide range of uses, including in cleaning supplies, fire extinguishers, and fumigants. It has been discovered that large amounts of it can have negative health effects.

A substance's solubility refers to its capacity to dissolve in a certain solvent. The fundamental solubility rule tells us whether a given item dissolves in

It is a clear liquid that has a faintly perceptible sweet odor. It is also known as benziform, perchloromethane, methane tetrachloride, carbon chloride, and methane tetrachloride. The most common way to encounter carbon tetrachloride is as a colorless gas in the air. Both its inflammability and ease of dissolution in water are nonexistent.

To learn more about carbon tetrachloride refer to

https://brainly.com/question/26412495

#SPJ4

Potassium sulfate and Calcium chloride reacts with each other to form Potassium chloride and Calcium sulphate. The chemical yield in this process is about 99%.

The balanced chemical reaction for the reaction of Potassium sulfate and Calcium chloride is given as:

CaCl₂ + K₂SO₄ → CaSO₄ + 2KCl

The reaction between Potassium sulfate and Calcium chloride is a double displacement type of reaction.

Double displacement reaction is a type of reaction where one part of the reactant is replaced by the another part of the reactant.

The general form of double displacement reaction is written as:

AB + CD → AD + BC

Learn more about double displacement reaction from the link below.

https://brainly.com/question/29307794

#SPJ1

The ability of sim agar to test for hydrogen sulfide production is based on the addition of which of the following substrates - Peptones, Sodium Thiosulphate, Ferrous Sulfate.

An example of a multi-test medium is SIM (sulfide, indole, motility) media, which examines multiple aspects of the bacterium's metabolism simultaneously. In this instance, motility, indole synthesis, and hydrogen sulfide generation.

Motility, indole, and sulfur. This media is differential. It examines an organism's capacity to reduce sulfur, make indole, and move through the agar (be motile). SIM is frequently used to distinguish between Enterobacteriaceae species.

Pancreatic digest of casein, peptic digest of animal tissue, ferrous ammonium sulfate Fe(NH4)2(SO4), sodium thiosulfate Na2S2O3, agar (3.5 g/L), and distilled water are all ingredients in SIM Medium.

The colorless gas hydrogen sulfide (H2S) has a pungent smell of rotting eggs. The eyes and respiratory system may get irritated after being exposed to hydrogen sulfide.

To know more about Sim Agar please click here ; https://brainly.com/question/27818615

#SPJ4

The theoretical yield of H₂O in this reaction is 31.69 Kg.

The chemical equation of the reaction of NH₃ and O₂ is,

NH₃ + O₂ → NO + H₂O

Now, balancing this equation,

4NH₃ + 5O₂ → 4NO + 6H₂O

So, as per reaction, we can see,

NH₃ is limiting reagent, hence it will decide the extent of products,

4 moles of NH₃ reacts completely with two oxygen to form 6 moles of water.

Moles = Mass reacted/formed/molar mass.

Molar mass of NH₃ = 17.04 g/mol

Reacted mass of NH₃ = 45000 g.

Molar mass of H₂O is 18 g/mol

Now, can write,

4 x (mass of NH₃ reacted/molar mass of NH₃) = 6 x (mass of H₂O formed/molar mass of H₂O)

4 x (45000/17.04) = 6 x (Formed mass of H₂O/18)

Formed mass of H₂O = 31690.14 grams.

Formed mass of H₂O = 31.69 Kg.

So, the theoretical yield of H₂O is 31.69 Kg.

To know more about yield of product, visit,

https://brainly.com/question/25996347

#SPJ4

The theoretical yield in grams for this reaction under the given conditions is 11.05g.

The theoretical yield is the greatest amount of a product that can be produced in a chemical reaction. It can be determined using the chemical equation with balance. the relative formula mass, mass, and mass of the  limiting reactant, as well as the relative formula mass of the result

Given,

Mass of H₂ = 1.96 g

Mass of N₂ = 9.78 g

Molar mass of H₂ = 2 g/mol

Molar mass of N₂ = 28 g/mol

Lets calculate the moles of N₂ and H₂,

Moles of H₂ = [tex]\frac{given mass}{molar mass}[/tex]

H₂ = [tex]\frac{1.96}{2}[/tex]

H₂ = 0.98 mol

same for moles of N₂ = [tex]\frac{given mass}{molar mass}[/tex]

N₂ = [tex]\frac{9.78}{28}[/tex]

N₂ = 0.349 mol

Now, calculate limiting and excess reagent.

The balanced chemical equation is:

3H₂ + N₂ = 2NH₃

From the balanced reaction we conclude that.

As, 3 mole of H₂ react 1 mole of N₂

So, 0.98 moles of H₂ react with 0.98/3 = 0.32 moles of N₂

From this we conclude that, N₂ is an excess reagent because the given moles are greater than the required moles and H₂ is a limiting reagent and it limits the formation of product.

Let us calculate the moles of NH₃

From the reaction, we conclude that

As, 3 mole of H₂ react to give 2 mole of NH₃

So, 0.98 mole of H₂ react to give [tex]\frac{2}{3}[/tex]×0.98 = 0.65 mole of NH₃

Now we have to calculate the mass of NH₃

Mass of NH₃ = Moles of NH₃ × Moles of NH₃

Molar mass of NH₃ = 17 g/m

Mass of NH₃ = 0.65 × 17

Mass of NH₃ = 11.05g

To know more about theoretical yield, visit:

https://brainly.com/question/12704041

#SPJ4

The kind of light absorbed by greenhouse gases that causes the warming of the atmosphere is infrared light.

Global warming refers to the increase in the average global temperature as a result of an increased amount of absorbed infrared light by greenhouse gases.

Greenhouse gases are gases that form a blanket layer in the atmosphere and prevent reflected low-energy infrared light from the sun from returning back to space. By absorbing this light, greenhouse gases are able to keep the earth warm.

However, as the concentration of greenhouse gases keeps increasing in the atmosphere, so is the amount of infrared light absorbed. Consequently, the atmosphere keeps getting warmer. The more the concentration of the gases increases, the more the temperature.

This is what is currently causing global warming.

More on global warming can be found here: https://brainly.com/question/12908180

#SPJ1

The given electronic configuration is of Potassium.

The electron configuration in atomic physics and quantum chemistry refers to the arrangement of electrons in orbitals around an atomic nucleus or the distribution of electrons within an atom or molecule.

One orbital can house a maximum of two electrons, and there are four different types of orbitals (s, p, d, and f). More electrons can be held in the p, d, and f orbitals since they contain various sub levels.

Thus, the given atomic configuration is 1s²,2s²,2p⁶,3s²,3p⁶4s¹.

by counting the number of electrons present in orbitals we can find out the atomic number of the atom because ,

no of electrons present = atomic number

thus, no of electrons = 2+2+6+2+6+1=19

the element with atomic number 19 is potassium.

thus, the given electronic configuration is of potassium.

To know more about electron configuration visit the link:

https://brainly.com/question/14283892?referrer=searchResults

#SPJ4

Answer:

each element gains one proton as you move from left to right across a period, atomic number is the number of protons

careful not to confuse it with the mass number which is the number of protons and neutrons.

also remember that in any given element, the proton number is always equal to electron number as they have opposite charges that cancel off, this is why elements are neutral.

The hydrogen atoms would show a signal with a chemical shift between 4.5 and 6.5 is the methyl group

A small molecule consists of one carbon atom and three hydrogen atoms. Methyl groups are attached to or extracted from proteins or nucleic acids and can change the way these molecules function in the body. Stable. Functional groups generally do not react except in the presence of very strong acids or bases.

Despite this stable structure, methyl groups can become trapped in a process known as 'methylation' where the entire functional group is transferred to another molecule. Epigenetics, gene expression, liver detoxification, and neurotransmitter synthesis all rely on this enzyme-mediated response.

Learn more about the methyl group in

https://brainly.com/question/12904781

#SPJ4

Dipoles are not the dominant intermolecular forces between IBr molecules in liquids. IBr is a covalent bond.

A covalent bond is a chemical bond that requires the sharing of electrons to form electron pairs between atoms. The constant balance between attractive and repulsive forces between atoms according to their share of electrons is called a covalent bond.

Covalent bonds are much more common in natural chemistry than ionic bonds. A covalent bond is the simultaneous attraction of the nucleus to one or more electron pairs. Covalent compounds generally have low boiling and melting factors and are determined in all three body states at room temperature. Covalent bonds no longer conduct electricity; This is because covalent compounds no longer have charged particles that can carry electrons.

Learn more about covalent bonds here https://brainly.com/question/3447218
#SPJ4

The molarity of the dilution is 0.01 M.

Parameter

When we fill the flask with the first solution and water until its full, we make a dilution.

The concentration changed when we added water, but the number of moles stay the same.

[tex]M = \frac{n}{V}[/tex]

n₁=n₂

V₁×M₁ = V₂×M₂

5.00×0,100=50×M₂

0.500=50×M₂

[tex]M_2 = \frac{0.500}{50}[/tex]

M₂ = 0,01 M

Learn more about Diluted molarity here: https://brainly.com/question/24709069

#SPJ4

According to the given statement potassium  minerals participates in antioxidant reactions.

Redox control of signaling pathways is important in defining the expression of genes and cells in response to peroxidation because natural antioxidants play a vital role in lowering ROS/RNS levels.

By neutralizing free radicals, complexing prooxidative ions, quenching molecular oxygen and phototherapy, and inactivating lipoxygenase, antioxidants prevent food from oxidizing. An antioxidant is a substance that has the power to prevent another molecule from oxidizing; in other words, an antioxidant is a limiting reagent stable enough to give an atom to a free radical in motion, neutralizing it.

To know more about  Antioxidant reactions visit:

https://brainly.com/question/14547660

#SPJ4

Answer:

1. Protons

2. Protons and Neutrons

3. Valence electrons

Explanation:

The final temperature after mixing these solutions will be 311K.

This can be calculated using formula:

q = m⋅c⋅(change in temperature)

−q (lost) = q (gained)

This is equivalent to

−50.0g⋅ (T−330)K = 30.0g⋅ (T-280)K

−50⋅T+16500 =30⋅T−8400

80.0⋅T = 24900

T = 311.25 K

To know more about this problem, click here,

brainly.com/question/28912732

#SPJ4

The correct answer is A. A pH of 7 say about a solution is The solution is neutral.

A pH of 7 indicates a neutral solution. The pH scale is a logarithmic scale that measures the acidity or alkalinity (basicity) of a solution. A pH value of 7 is considered neutral, which means the concentration of hydrogen ions (H+) is equal to the concentration of hydroxide ions (OH-) in the solution. In other words, the solution is neither acidic nor basic.

Acidic solutions have a higher concentration of hydrogen ions (H+), which makes them more acidic. The lower the pH value, the higher the concentration of H+ ions and the stronger the acid.

Read more on pH here:https://brainly.com/question/22390063

#SPJ1

Answer:

4834.20 ml or 4.8342 L

Explanation:

Gold has density of 19.30 g/ml

so according to d = m/V

V = m/d = 93,300/19.30 = 4834.19689119 = 4834.20 ml or 4.8342 L

The volume of nuggets of gold that has a mass of 93,300g is 4834.20 ml or 4.8342 L.

Volume is the space occupied by a three-dimensional object.

Density is the mass per unit volume. Density is a scalar quantity. It is denoted by d and the symbol for density is given as rho, a Greek symbol. Density is calculated as mass divided by volume.

Density is directly proportional to mass and inversely proportional to volume. Thus, with an increase in density, mass increases and volume decreases, and vice-versa

Gold has a density of 19.30 g/ml

so according to density = mass/ volume

V = m/d = 93,300 / 19.30 = 4834.19

4834.20 ml or 4.8342 L

Therefore, the volume of nuggets of gold that has a mass of 93,300g is 4834.20 ml or 4.8342 L.

To learn more about volume, refer to the link:

https://brainly.com/question/13338592

#SPJ2

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, ionic compounds with transition metals and  ionic compounds without transition metals are named in the same way.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

Ionic compounds with transition metals are named with the same method as compounds without transition metals, except the charge of the metal ion is specified by a Roman numeral in parentheses after the name of the metal.

Therefore, ionic compounds with transition metals and ionic compounds without transition metals are named in the same way.

To learn more about chemical compound, here:

https://brainly.com/question/26487468

#SPJ1

The ketone will have a larger rf value because it is more polar than the alcohol.

Does more polarity suggest a greater or lesser Rf value?

To learn more about Rf values, follow the link https://brainly.com/question/26639192

#SPJ4

0.28986 M mass of potassium nitrate can be produced from the reaction of 30.00ml of 0.10m nitric acid with 15.00ml of 0.25m potassium carbonate

V₁S₁ = V₂S₂ ( V₁  is the volume of acid ,S₁ is the strength of acid, V₂ is the volume of base , S₂ is the strength of base)

So, S1= V2S2 /V1

Putting the values ;

S1= V2S2 /V1

=> S1 = (32.58×0.08897)/10.00

=> S1 = 0.28986

concentration of solution of phosphoric acid = 0.28986 M

One or more chemicals, sometimes referred to as reactants, are changed into one or more new substances, referred to as products, during a chemical reaction. Chemical elements and compounds are both substances. reacting in action, procedure, or example. opposition to a movement, power, or effect The transformation of one or more chemicals into one or more other compounds is known as a chemical reaction. Examples include how rust is created when iron and oxygen combine. Making sodium acetate, carbon dioxide, and water from vinegar and baking soda. Exploding or burning items

Learn more about reaction here:

https://brainly.com/question/28984750

#SPJ4

The entropy of the system increases according to  increase entropy principle

The Increase in Entropy Principle states that for any process the total change in entropy of a system together with its enclosing adiabatic surroundings is always greater than or equal to zero.

The measure of a system's thermal energy per unit temperature that is unavailable for doing useful work. Because work is obtained from ordered molecular motion, the amount of entropy is also a measure of the molecular disorder, or randomness, of a system.

So hence when ice cubes are added into a insulated cup of hot water it decreases the temperature and the ice melts

To know kore about increased entropy principle

https://brainly.com/question/13001877

#SPJ4