The illustrations show soccer balls of different masses being kicked with equal force.
Which ball will have the greatest acceleration?

The frequency of the wave at the given period is 0.114 Hz. This frequency shows the number of revolution of the wave in a second.

The frequency of a wave is the number of revolutions of the wave per second.

Frequency of a wave is determined by taking the inverse of period of the wave.

The frequency of the wave at the given period is calculated as follows;

f = 1/T

Where;

f = 1/8.75

f = 0.114 Hz

Thus, the frequency of the wave at the given period is 0.114 Hz.

Learn more about frequency of wave here: https://brainly.com/question/10728818

Answer:

d (density) = m / V = (292 - 180) g / 95 cm^3 = 1.18 g / cm^3

(water is 1 gm / cm^3)

Interstellar is a movie about the human race being faced with a

civilization ending blight. A small group of brave individuals explore

possible new habitable worlds for humans. The following questions

will help guide you through the movie and hopefully get you

thinking about the future.

1. The Cooper family hijacks a UAV (Unmanned Aerial Vehicle).

What do you know about UAVs and how they are used today?

2. While at the parent-teacher conference, Murphy’s teacher

mentions that the Apollo program -- the same program that

landed humans on the Moon -- was just propaganda to

convince the Soviet Union to bankrupt themselves trying to do

the same. The reason for this was to encourage children to

take care of their own planet, rather than wasting precious

resources day dreaming of leaving it. Which side of the fence

would you sit on? Would you look for ways to save Earth and

our ability to stay there, or would you look to the sky, and find

a new planet to live on? Why?

3. A) What natural disaster(s) is Earth suffering from in the beginning of Interstellar?

B) If one of these happened now what actions would you take to protect yourself?

4. Cooper, Doyle, Romilly, and Dr. Brand (female) rendezvous with the Endurance in orbit around Earth. Once

onboard, they begin to spin the Endurance. Why? (Think about the physics happening here!) Draw a diagram.

5. Why or why isn’t space exploration important for the people in the movie interstellar? Why or why isn’t

space exploration important in today’s society? Defend your answers.

6. Explain time dilation as best as you can.

7. A) Estimate how long Dr. Mann went without human contact while on the ice planet:

The Lazarus mission was __________ years ago. It takes _______ years to get to Saturn from Earth. Cooper

and Dr. Brand were on Miller’s planet for approximately __________ years. This means the total time Dr.

Mann went without human contact is: ___________ years.

B) Consider the longest time away from human contact you've experienced. What did you do to keep yourself

occupied?

Useful Vocabulary

Blight: A specific symptom affecting plants in

response to infection by a pathogenic organism. The

potato famine of Ireland was caused by blight.

Event horizon: Is a point in which not even light can

escape the gravitational influence of the black hole.

Maroon: The intentional action of leaving someone

in a remote area such as an inhabitable island.

Rendezvous: When two objects meet and typically

dock together while in space.

Time dilation: A difference of elapsed time between

two events as measured by observers either moving

relative to each other or differently situated from

gravitational masses.

UAV: Unmanned Aerial Vehicles are remote

controlled or autonomous flying vehicles.

Unmanned aerial vehicles (UAVs) are typically used for a variety of purposes such as:

An unmanned aerial vehicle (UAV) is also referred to as a drone and it can be defined as an aircraft that is designed and developed to be piloted or controlled by a remote control (ground-based controller) and on-board computer systems.

This ultimately implies that, an unmanned aerial vehicle (UAV) is a class of aircrafts that can fly without any human pilot, cabin crew, or passengers on board.

In conclusion, unmanned aerial vehicles (UAVs) carries no human pilot and are typically used for a variety of purposes such as:

Read more on unmanned aerial vehicle here: https://brainly.com/question/4349468

#SJP1

Answer:

TO answer this question i need wave speed

Explanation:

Answer:

orce = rate of change of momentum which is m a if the mass is constant

10 Newtons = change of momentum/0.10 second

so change of momentum = 1 kg m/s

by the way the change in speed would be 1/5 = .2 m/s

Explanation:

If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then the impulse exerted by the force on the object would be 1 Ns, and the change in the momentum would be  1 Ns.

It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.

As given in the problem If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then we have to find out what the impulse exerted by the force on the object.

P = force × time

  = 10 × 0.1

  = 1  Ns

Thus, If a 5-kg object experiences a 10-N force for a duration of 0. 10-second then the impulse exerted by the force on the object would be 1 Ns, and the change in the momentum would be  1 Ns.

To learn more about momentum from here  , refer to the link given below ;

brainly.com/question/17662202

#SPJ5

Since the magnetic flux through a coil of wire containing two loops changes at a constant rate from -58 wb to 38 wb in 0. 34 s, the emf induced in the coil is -5.65 V

The induced emf in the coil is given by ε = -NΔΦ/Δt where

Since ε = -NΔΦ/Δt

ε = -N(Φ₂ - Φ₁)/(t₂ - t₁)

Substituting the values of the variables into the equation, we have

ε = -N(Φ₂ - Φ₁)/(t₂ - t₁)

ε = -2(38 Wb - (-58 Wb))/(34 s - 0 s)

ε = -2(38 Wb + 58 Wb)/(34 s - 0 s)

ε = -2(96 Wb)/34 s

ε = -192 Wb/34 s

ε = -5.65 Wb/s

ε = -5.65 V

So, the emf induced in the coil is -5.65 V

Learn more about induced emf in coil here:

https://brainly.com/question/13051297

The electrical action generated by a non-electrical source, measured in volts. The emf induced in the coil is -564.7 V.

The electrical action generated by a non-electrical source, measured in volts, is referred to as emf or electromotive force. Devices, such as batteries or generators, generate an emf by converting various sources of energy into electrical energy.

The emf induced in a coil is given by

[tex]\varepsilon = \dfrac{-N \times \triangle \phi}{ \triangle t}[/tex]

where

ΔΦ is the change in magnetic flux, Δt is the change in time, and N is the number of loops.

Given that the initial magnetic flux is -58 Wb while the final magnetic flux is 38 Wb. Also, the change in time is 0.34 seconds and the number of loops is 2. Therefore, the emf induced can be written as,

[tex]\varepsilon = \dfrac{-N \times \triangle \phi}{ \triangle t}[/tex]

[tex]\varepsilon = \dfrac{-(2) \times [38-(-58)]}{0.34}\\\\\varepsilon = -564.7\rm\ V[/tex]

Hence, the emf induced in the coil is -564.7 V.

Learn more about EMF:

https://brainly.com/question/15121836

#SPJ4

Answer:

(c) the male vocal cord is longer

Explanation:

Males have a lower pitch in their voises than females, elongating men's vocal cords.

I am joyous to assist you at any time.

Voice of man is heavy compared to a woman because male vocal cord is longer.

The change is caused by an enlargement in the vocal folds, generating a more serious and adult voice. Generally speaking, the male voice is deeper than the female voice because the vocal muscles grow more in men than in women.

Males have a lower pitch in their voises than females, elongating men's vocal cords.

See more about vocals at brainly.com/question/13932020

#SPJ5

Daryl’s conclusion that the relationship between the frequency and the wavelength of sound waves in air is the result of causation is correct.

This is defined as the relationship between successive events when the first event brings about the other.

The higher frequencies brings about shorter wavelengths which is why it is termed as being  a result of causation.

Read more about Causation here https://brainly.com/question/9583324

Answer ,,a main sequence stars burns through the hydrogen in it's core

Explanation:

When the stars go out

Eventually,reaching the end of its life cycle. At this point, it leaves the main sequence. Stars smaller than a quarter the mass of the sun collapse directly into white dwarfs

For a distant astronomical object (a quasar) is moving away from us at half the speed of light, the speed of the light we receive from this quasar  is mathematically given as c = 3x108 m/s

Generally, the equation for the   is mathematically given as

The speed of light can be said to be measured to be approximately the value c = 3x108 m/s

.

In conclusion, An will not influence  3x108 m/s unless both are inertia and frames refrences where newtons laws are valid, so the speed of light measured from the earth frame is equal to  3x108 m/s

Read more about Speed

https://brainly.com/question/4931057

less than 20 Hz

The frequency of subsonic sound is less than 20 Hz

subsonic sound refers to a sound which has a wave that travels slower than the speed of sound.

Thus subsonic sound < 20 Hz

Answer:

less than 20Hz

Explanation:

Bats can hear below 20Hz ,so they use this to travel in air

The rocky object orbiting in space is most likely referred to as an asteroid.

This is referred to a rocky object which revolve around the sun and are considered too small to be called a planet.

Asteroids was observed with the use of a telescope and is around 250 km wide thereby making it the most appropriate choice.

Read more about Asteroids here https://brainly.com/question/11996385

The particular temperature at which vaporisation occurs is known as the boiling point of liquid. Volume of water increases when it boils at 100° C. 1 cm3 of water at 100 ° C becomes 1760 cm3 of steam at 100 ° C.

Hope it helps!!!!!!!!!!!!!!!!!!!!! ~~~~~~~~~~~~~~~~~~~

ಥ‿ಥ

This question involves the concept of the law of conservation of momentum.

The horizontal speed acquired by catching the ball will be "0.223 mph".

According to the law of conservation of momentum applied in horizontal direction:

Total Initial Momentum = Total Final Momentum

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

Therefore,

[tex](0.145\ kg)(100\ mph)+(65\ kg)(0\ mph)=(0.145\ kg)(0\ mph)+(65\ kg)(v_2)\\\\v_2=\frac{14.5\ kg.mph}{65\ kg}\\\\[/tex]

v₂ = 0.223 mph

Learn more about the law of conservation of momentum here:

https://brainly.com/question/1113396

This is less an answer more like the answers that should be it.

A) 9.9 cm/s

B) 5.6 cm/s

C) 11.8 cm/s

D) 4.2 cm/s

Answer:

where is the displacement

[tex]v = \frac{s}{t} [/tex]

The average velocity of the fly between 0 and 15 seconds will be 10 m/sec.Velocity is the time-based component.

The average velocity is the ratio of the total distance traveled to the total time taken by the body. Its unit is m/sec.

From the given graph it is obsderved that the displacement from 0 to 15 seconds will be 150 m.

[tex]\rm V = \frac{D_2-d_1 }{t_2-t_1} \\\\ V = \frac{150}{15-0} \\\\ V= 10 \ m/sec[/tex]

Hence the average velocity of the fly between 0 and 15 seconds will be 10 m/sec.

To learn more about the average velocity refer to the link;

https://brainly.com/question/862972

#SPJ4

After the collision, object X will move at a speed of 2 m/s in its original direction while object Y will move at a speed of 5 m/s in its original direction.

When the two objects collide but do not stick together, the type of collision is elastic collision.

In elastic collision, both momentum and kinetic energy are conserved.

mu₁ + mu₂ = mv₁ + mv₂

5m + 2m = mv₁ + mv₂

m(5 + 2) = m(v₁ + v₂)

7 = v₁ + v₂ -------- (1)

Apply the concept of one direction velocity;

u₁ + v₁ = u₂ + v₂

5 + v₁ = 2 + v₂

v₂ = v₁ + 3 ------ (2)

Solve (1) and (2) together;

7 = v₁ + v₁ + 3

4 = 2v₁

v₁  = 2 m/s

v₂  = 2 + 3 = 5 m/s

Thus, after the collision, object X will move at a speed of 2 m/s in its original direction while object Y will move at a speed of 5 m/s in its original direction.

Learn more about elastic collision here: https://brainly.com/question/7694106

Answer:

Ocean acidification reduces the amount of carbonate, a key building block in seawater. This makes it more difficult for marine organisms, such as coral and some plankton, to form their shells and skeletons, and existing shells may begin to dissolve.

Answer:

The intake of carbon dioxide (CO2) from the atmosphere causes ocean acidification, which is the continual decline in the pH value of the Earth's oceans. The burning of fossil fuels by humans is the primary cause of ocean acidification. The amount of carbon dioxide absorbed by the ocean grows in lockstep with the amount of carbon dioxide in the atmosphere. This causes a sequence of chemical reactions in the seawater, which has a negative impact on the, however, their rine life that lives beneath the surface. Carbonic acid is formed when carbon dioxide dissolves in seawater (H2CO3). The pH value of the ocean surface is estimated to have decreased from approximately 8.25 to 8.14 between 1751 and 1996, representing a nearly 30% increase in H+ ion concentration in the world's oceans (note that the pH scale is logarithmic, so a change of one pH unit equals a tenfold change in H+ ion concentration). The pH of the ocean in 2020 will be 8.1, according to the National Oceanic and Atmospheric Administration.

Explanation:

The linear acceleration of collar D when θ = 60° is - 693.867 inches per square second.

In this question we have a system formed by three elements, the element AB experiments a pure rotation at constant velocity, the element BD has a general plane motion, which is a combination of rotation and traslation, and the ruff experiments a pure translation.

To determine the linear acceleration of the collar ([tex]a_{D}[/tex]), in inches per square second, we need to determine first all linear and angular velocities ([tex]v_{D}[/tex], [tex]\omega_{BD}[/tex]), in inches per second and radians per second, respectively, and later all linear and angular accelerations ([tex]a_{D}[/tex], [tex]\alpha_{BD}[/tex]), the latter in radians per square second.

By definitions of relative velocity and relative acceleration we build the following two systems of linear equations:

[tex]v_{D} + \omega_{BD}\cdot r_{BD}\cdot \sin \gamma = -\omega_{AB}\cdot r_{AB}\cdot \sin \theta[/tex]   (1)

[tex]\omega_{BD}\cdot r_{BD}\cdot \cos \gamma = -\omega_{AB}\cdot r_{AB}\cdot \cos \theta[/tex]   (2)

[tex]a_{D}+\alpha_{BD}\cdot \sin \gamma = -\omega_{AB}^{2}\cdot r_{AB}\cdot \cos \theta -\alpha_{AB}\cdot r_{AB}\cdot \sin \theta - \omega_{BD}^{2}\cdot r_{BD}\cdot \cos \gamma[/tex]   (3)

[tex]-\alpha_{BD}\cdot r_{BD}\cdot \cos \gamma = - \omega_{AB}^{2}\cdot r_{AB}\cdot \sin \theta + \alpha_{AB}\cdot r_{AB}\cdot \cos \theta - \omega_{BD}^{2}\cdot r_{BD}\cdot \sin \gamma[/tex]   (4)

If we know that [tex]\theta = 60^{\circ}[/tex], [tex]\gamma = 19.889^{\circ}[/tex], [tex]r_{BD} = 10\,in[/tex], [tex]\omega_{AB} = 16\,\frac{rad}{s}[/tex], [tex]r_{AB} = 3\,in[/tex] and [tex]\alpha_{AB} = 0\,\frac{rad}{s^{2}}[/tex], then the solution of the systems of linear equations are, respectively:

[tex]v_{D}+3.402\cdot \omega_{BD} = -41.569[/tex]   (1)

[tex]9.404\cdot \omega_{BD} = -24[/tex]   (2)

[tex]v_{D} = -32.887\,\frac{in}{s}[/tex], [tex]\omega_{BD} = -2.552\,\frac{rad}{s}[/tex]

[tex]a_{D}+3.402\cdot \alpha_{BD} = -445.242[/tex]   (3)

[tex]-9.404\cdot \alpha_{BD} = -687.264[/tex]   (4)

[tex]a_{D} = -693.867\,\frac{in}{s^{2}}[/tex], [tex]\alpha_{BD} = 73.082\,\frac{rad}{s^{2}}[/tex]

The linear acceleration of collar D when θ = 60° is - 693.867 inches per square second. [tex]\blacksquare[/tex]

The statement is incomplete and figure is missing, complete form is introduced below:

Arm AB has a constant angular velocity of 16 radians per second counterclockwise. At the instant when θ = 60°, determine the acceleration of collar D.

To learn more on kinematics, we kindly invite to check this verified question: https://brainly.com/question/27126557

Answer:

seismic wave

Explanation:

The distance between the image and the mirror is -8.6 cm

A concave mirror has a reflective surface that is curved inward and away from the light source. Concave mirrors reflect light inward to one focal point.

Unlike convex mirrors, the image formed by a concave mirror shows different image types depending on the distance between the object and the mirror.

Let's use the mirror equation to solve the problem:

[tex]\dfrac{1}{f}=\dfrac{1}{d_o}+\dfrac{1}{d_i}[/tex]

where f is the focal length of the mirror,  the distance of the object from the mirror, and  the distance of the image from the mirror.

For a concave mirror, for the sign convention f is considered to be positive. So we can solve the equation for  by using the numbers given in the text of the problem:

[tex]\dfrac{1}{12}=\dfrac{1}{5}+\dfrac{1}{d_i}[/tex]

[tex]\dfrac{1}{d_i}=-\dfrac{7}{60}[/tex]

[tex]d_i=-8.6\ cm[/tex]

Where the negative sign means that the image is virtual, so it is located behind the mirror, at 8.6 cm from the center of the mirror.

Hence the distance between the image and the mirror is -8.6 cm

To know more about concave mirror follow

https://brainly.com/question/1147247

The net force that is applied to the passenger during the elevator acceleration is 218.75 N.

This is the single force obtained from the combinatiion of two or more forces

To calculate the net force that is applied to the passenger during the elevator's acceleration, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, The net force that is applied to the passenger during the elevator acceleration is 218.75 N.

Learn more about net force here: https://brainly.com/question/13370981

Answer:

hello.

Negative acceleration is also called deceleration.

Explanation:

If the velocity of the object does not change with time, it has zero acceleration.

Answer:

12.5 m/s

Explanation:

By conservation of momentum, we have that:
[tex]\displaystyle m_1v_1 + m_2v_2 = m_1v_1' + m_2v_2'[/tex]

Because the two objects combine after collision, they will have the same velocity:

[tex]\displaystyle m_1v_1 + m_2v_2 = (m_1+m_2)v_f[/tex]

Substitute and solve for final velocity:

[tex]\displaystyle \begin{aligned} (50 \text{ kg})(15\text{ m/s}) + (50\text{ kg})(10\text{ m/s}) & = ((50+50)\text{ kg})v_f \\ \\ v_f & = 12.5\text{ m/s}\end{aligned}[/tex]

In conclusion, the final velocity of the system will be 12.5 m/s.

Answer:

A

Explanation:

Think about rubbing your hands together- the friciton produces heat