[tex]\qquad\qquad\huge\underline{{\sf Answer}}♨[/tex]
The ion had 4+ charge when it had 86 electrons, so it should have no charge on it if there are 4 more electrons and the atom will be neutral.
And since we know that number of electrons in a neutral atom is equal to Atomic Number of that atom.
So, at neutral phase, it had 86 + 4 = 90 electrons
hence, our required atom is : Thorium
And it's ion will be ~[tex]\sf Th^{4+} [/tex]
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
What type of energy transformation takes place during cellular respiration?
Use complete sentences to explain how energy is conserved during cellular respiration. (10 points)
Answer:
chemical energy transgormation takes place during cellular respiration
Which of the following is the primary use of land in the United States?
Question 1 options:
Pasture/range
Forest
Cropland
Urban
Answer:
pasture/range
Explanation:
this is because more than 1/3 of the country's land is being used for this mean alone.
Answer: Forest
Explanation: The largest percentage of land use in the United States is for forests.
A reaction rate increases by a factor of 655 in the presence of a catalyst at 37°C. The activation energy of the original pathway is 106 kJ/mol. What is the activation energy of the new pathway, all other factors being equal? Group of answer choices 89.3 kJ/mol 16,600 kJ/mol 89.3 J/mol 16,600 J/mol
For a reaction rate that increases by a factor of 655 in the presence of a catalyst at 37°C, the activation energy of the new pathway is mathematically given as
Ea2=89.28JKoule/mol
What is the activation energy of the new pathway, all other factors being equal?Generally, the equation for the rate constant is mathematically given as
K=Ae^{Ea1/Rt}
Therefore
[tex]\frac{1}{655}=\frac{1}{8.31*3.10}(Ea2-105000)[/tex]
Ea2=89286.083Joule/mol
In conclusion, the activation energy
Ea2=89.28JKoule/mol
Read more about Energy
https://brainly.com/question/13439286
______ contributes to the nitrogen cycle by removing nitrogen from the air and converting it into a form that is usable by plants.
plants
earthworms
fungi
bacteria
The complete statement is "Bacteria contribute to the nitrogen cycle by removing nitrogen from the air and converting it into a form that is usable by plants." This is further explained below.
What is Bacteria?Generally, Bacteria are mono-celled tiny creatures that can be beneficial. Bacteria are germs with a simpler cell structure than many other creatures.
In conclusion, Bacteria contribute to the nitrogen cycle by removing nitrogen from the air and converting it.
Read more about Plant
https://brainly.com/question/25832580
Answer:bacteria
Explanation:
write the formula for lead oxide.
Answer:
Lead(II) oxideExplanation:
Lead(II) oxide, also called lead monoxide, is the inorganic compound with the molecular formula PbO. PbO occurs in two polymorphs: litharge having a tetragonal crystal structure, and massicot having an orthorhombic crystal structure. Modern applications for PbO are mostly in lead-based industrial glass and industrial ceramics, including computer components. It is an amphoteric oxide.[3]IUPAC nameLead(II) oxideOther namesLead monoxideLithargeMassicotPlumbous oxideGalena PreparationPbO may be prepared by heating lead metal in air at approximately 600 °C (1,100 °F). At this temperature it is also the end product of oxidation of other oxides of lead in air:[4]Thermal decomposition of lead(II) nitrate or lead(II) carbonate also results in the formation of PbO:2 Pb(NO3)2 → 2 PbO + 4 NO2 + O2PbCO3 → PbO + CO2PbO is produced on a large scale as an intermediate product in refining raw lead ores into metallic lead. The usual lead ore is galena (lead(II) sulfide). At a temperature of around 1,000 °C (1,800 °F) the sulfide is converted to the oxide:[5]2 PbS + 3 O2 → 2 PbO + 2 SO2Metallic lead is obtained by reducing PbO with carbon monoxide at around 1,200 °C (2,200 °F):[6]PbO + CO → Pb + CO2pls brainlest meh
Which bond links amino acids together?
glycosidic bond
hydrogen bond
phosphodiester bond
peptide bond
Answer:
Peptide Bonds
Explanation:
Peptide bonds are formed by a biochemical reaction that extracts a water molecule as it joins the amino group of one amino acid to the carboxyl group of a neighboring amino acid.
Procedure for Lab: Enthalpy ?
I have a lab on Edge that's about Enthalpy. The assignment is called " Lab: Enthalpy". If someone could help me with the procedure of the lab, that would be nice. (I don't need the data table, just the procedure.)
The enthalpy refers to the thermodynamic characteristics that have chemical systems associated with their internal energy.
What is enthalpy?The enthalpy refers to the thermodynamic features of the chemical systems associated with the energy of such systems.
Enthalpy is used to estimate the ability of the system to perform work and release energy in the form of heat.
It is well known that different types of chemical reactions may exhibit different enthalpies, which can be estimated by the internal energy, pressure of the system and volume.
Learn more about enthalpy here:
https://brainly.com/question/14047927
Answer:
Here you are <3
Explanation:
I attached the one I just submitted
Determine the difference between archaea and bacteria. (1 point)
All bacteria are unicellular organisms, while some archaea are multicellular.
Archaea live in extreme environments, while bacteria can be found in most places on Earth.
Bacteria and archaea have different shapes.
Archaea is the domain of life that includes the plant and animal kingdoms, while the bacteria domain includes fungi and protists.
Answer:
I have this work and I'm in 5th grade
Explanation:
Answer:
Archaea live in extreme environments, while bacteria can be found in most places on Earth.
Explanation:
Doing a the test now and this is the answer.
What is the volume of 0.960 moles of sulfur trioxide?
Answer:
76.86g
Explanation:
the molar mass of sulfur trioxide is about 80.06, so 80.06 grams per mol, 0.96*80.06=76.86g
5.26 KG of nitrogen monoxide and 7.64 milligrams of oxygen are combined with mass of nitrogen dioxide is formed
Answer:
NO + O2 NO2
Explanation:
.
Rocks containing _____ have magnetic properties.
lodestar
iron
magnesia
magnetite
Answer: Iron
Explanation: There are little minnerals that make it magnetic.
Explain how energy is conserved in combustion reactions.
Answer:
That’s because of the law of conservation of energy, which states that: Energy cannot be created or destroyed.
Explanation:
Energy may change form during a chemical reaction. For example, energy may change from chemical energy to heat energy when gas burns in a furnace. The exact amount of energy remains after the reaction as before.
Find the acceleration of the 2 kg block in the following diagram. ( Hint find the net force!)
The acceleration of the block will be -2 m/s² in the backward direction.
What is force?
Force is defined as the product of mass of the body and the acceleration with which it is moving. Mathematically -
F = ma
It is a vector quantity. In the three dimensional coordinate system, the force vector can be resolved as -
[F] = F[x] a[x] + F[y] a[y] + F[z] a[z]
Given is a diagram in which two forces are acting on a block.
We can write -
Force 1 on block [F1] = 4 a[x]
Force 2 on block [F2] = 8 (- a[x]) = - 8 a[x]
Resultant of forces [F] = [F1] + [F2] = 4 a[x] + ( - 8 a[x]) = - 4 a[x]
Now, we know that -
F = MA
A = F/M
In vector form, acceleration will be -
[A] = - 1/m × (4 a[x])
[A] = -1/2 × (4 a[x])
[A] = - 2 a[x]
Therefore, the acceleration of the block will be -2 m/s² in the backward direction.
To solve more questions on force, visit the link below-
https://brainly.com/question/19386327
#SPJ5
buffer is prepared by adding 275 mL of .676M of HCl to 500 mL of .525M sodium acetate. What is the pH?
The pH of the buffer prepared by adding 275 mL of .676M of HCl to 500 mL of .525M sodium acetate is 6.45.
How to calculate pH?The pH of a buffer solution can be calculated by initially calculating the millimoles of both the conjugate base and acid.
Millimoles of hydrochloric acid = 275mL × 0.676M = 185.9millimolesMillimoles of sodium acetate = 500mL × 0.525M = 262.5millimolesFrom, Henderson Hasselbalch equation,
pH = pKa + log conjugate base/acid
pka of HCl = -6.3
-6.3 + log 262.5/185.9
6.3 + 0.15
pH = 6.45
Therefore, the pH of the buffer prepared by adding 275 mL of .676M of HCl to 500 mL of .525M sodium acetate is 6.45.
Learn more about pH at: https://brainly.com/question/491373
2. A body was discovered in the woods. The man has been missing for two days. The
average temperature the previous 48 hours was 50° fahrenheit. When the body was
discovered, it was at peak rigor.
The man has been missing for two days. The average temperature the previous 48 hours was 50° fahrenheit. 12-24 hours is the time. body was discovered.
Time is the ongoing progression of existence and things that happen in what seems to be an irrevocable order from the past, present, and forward into the future. It is a quantity that is a part of several measurements that are used to compare the length of events or the gaps between them.
To compare how long they last, to order events, and to measure how quickly things change in the real world or in our conscious experience. Along with the three spatial dimensions, time is frequently referred to as an a fourth dimension. A body was discovered in the woods. The man has been missing for two days. The average temperature the previous 48 hours was 50° fahrenheit. 12-24 hours, body was discovered.
To know more about time, here:
https://brainly.com/question/29253427
#SPJ1
Find the empirical formula of a compound that contains 34.97 g of Fe and 15.03 g of O.
Why is fusion only possible with small nuclei?
Answer:
The measurement of the mass of nuclei has revealed that the mass of the constituent protons and neutrons is more than the mass of the nucleus
Explanation:
Hope this helps ya have a nice day
What happens when the temperature of a gas is increased?
O A. The boiling point will increase,
O B. The collisions between molecules will decrease,
O C. The volume will increase,
D. The pressure will decrease,
what is the mass percentage of Li2CO3
Answer: its supposed to be 18.78%.
Explanation:
If 3.500 moles of water react completely according to the following equation, how much heat must be absorbed in kilojoules? 6CO2+6H2O→C6H12O6+6O2ΔH=2,803 kJ
The amount of heat absorbed in kilojoules when 3.5 moles of water react is 1635.08 KJ
Balanced equation6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂ ΔH = 2803 KJ
From the balanced equation for above,
6 moles of water reacted to absorb 2803 KJ of heat
How to determine the heat absorbedFrom the balanced equation for above,
6 moles of water reacted to absorb 2803 KJ of heat
Therefore,
3.5 moles of water will react to absorb = (3.5 × 2803) / 6 = 1635.08 KJ of heat
Thus, 1635.08 KJ of heat were absorbed by the reaction.
Learn more enthalpy change:
https://brainly.com/question/11967318
How should the solute and solvent be mixed in the container?.
Fill to the 250-mL mark with water after mixing a tiny amount of water with the solute to dissolve it.
How would I name this?
Provide the correct IUPAC name for the compound shown here.
The IUPAC name of the compound shown in the image is 4-bromo butyne.
What is IUPAC?IUPAC is a body in chemistry that stands for International Union of Pure and Applied Chemistry.
IUPAC functions in the naming of organic compounds in chemistry.
According to the image in this question, the functional group of the compound is a triple carbon bond meaning that it is an alkyne.
Bromine is attached to the fourth carbon, hence, the IUPAC name of the compound is 4-bromo butyne.
Learn more about IUPAC at: https://brainly.com/question/1458253
A solution consists of 35.00 g of CuSO4 dissolved in 250.0 mL of water. The molar mass of Cu is 63.55 g/mol the molar mass of S is 32.07 g/mol, and the molar mass of O is 16.00 g/mol. What is the molarity of the solution?
Answer:
0.87708moldm-3
Explanation:
[tex]molar \: mass \: of \: cuso4 = 63.55 + 32.07 + 4(16.00) \\ =159.62gmol {}^{ - 1} \\ mole(n) = \frac{mass}{molar \: mass } \\ n = \frac{35}{159.62} \\ n = 0.21927mol \\ molarity = \frac{n}{v} \\ molarity = \frac{0.21927}{0.25} \\ molarity = 0.87708moldm {}^{ - 3} [/tex]
Which of the following microbial growth mediums would be used to sample for fungi bacterial growth in the sterile environment ? a) MacConkey agar b) Trypticase soy agar c) Tryptone glucose extract agar d) Bacteriological agar
The microbial growth medium that would be used to sample for Fungi bacterial growth in sterile environment is : ( B ) Trypticase soy agar
What is a growth medium ?A growth medium is a solid or liquid which is designed to support the growth of population such as microorganism through cell proliferation. A growth medium contains nutrients which support the growth of the microorganisms.
A growth medium which will support the growth of both fungi and bacteria growth is a Trypticase soy agar medium.
Hence we can conclude that The microbial growth medium that would be used to sample for Fungi bacterial growth in sterile environment is : Trypticase soy agar
Learn more about Growth medium : https://brainly.com/question/26298859
How is fission different than alpha or beta decay?
Fission is when the parent atom splits into two daughter products. Whereas atom with a mass number is lower by 4 and an atomic number is lower by 2.
Is nuclear fission alpha or beta?Fission outcomes emit beta radiation, while actinides mainly emit alpha radiation. Many of each also radiate gamma radiation.
The beta decays form an isobaric, fission-product decay chain for each mass number.
Thus, Fission is when the parent atom splits into two daughter products.
To learn more about fission click here:
https://brainly.com/question/2732120
What is not a part of the digestive system
A. Large intestine
B. Small intestine
C.Trachea
D. Esophagus
Answer:
Trachea is not the part of digestive system
Explanation:
Trachea is the part of the respiratory system
Please help!!! 25 points!!!
This image illustrates how different species of warblers are able to survive using different parts of the tree through habitat partitioning. Why would these warblers be able to survive and thrive using the same trees?
A) it reduces interspecific competition
B) it reduces intraspecific competition
C) it increases interspecific competition
D) it increases intraspecific competition
Answer:
C.
Explanation:
✿————✦————✿————✦————✿
Why C? Because-
A solution consists of 35.00 g of CuSO4 dissolved in 250.0 mL of water. The molar mass of Cu is 63.55 g/mol the molar mass of S is 32.07 g/mol, and the molar mass of O is 16.00 g/mol. What is the molarity of the solution?
The molarity of a solution that contains 35.00 g of CuSO4 dissolved in 250.0 mL of water is 0.88M.
How to calculate molarity?The molarity of a solution can be calculated using the following formula:
Molarity = no of moles/volume
According to this question, a solution consists of 35.00 g of CuSO4 dissolved in 250.0 mL of water.
no.of moles of CuSO4 = 35g ÷ 159.6g/mol
no. of moles of CuSO4 = 0.22 moles
Therefore; molarity of CuSO4 solution is calculated as follows:
M = 0.22 ÷ 0.25
M = 0.88M
Therefore, the molarity of a solution that contains 35.00 g of CuSO4 dissolved in 250.0 mL of water is 0.88M.
Learn more about molarity at: https://brainly.com/question/12127540
If 4.65 LL of CO2CO2 gas at 22 ∘C∘C at 793 mmHg mmHg is used, what is the final volume, in liters, of the gas at 35 ∘C∘C and a pressure of 743 mmHg mmHg , if the amount of CO2CO2 does not change?
Answer:
About 7.9 L.
Explanation:
We can utilize the ideal gas law. Recall that:
[tex]\displaystyle PV = nRT[/tex]
Because the amount of carbon dioxide does not change, we can rearrange to formula to:
[tex]\displaystyle \frac{PV}{T}= nR[/tex]
Because the right-hand side stays constant, we have that:
[tex]\displaystyle \frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} = nR[/tex]
Hence substitute initial values and known final values:
[tex]\displaystyle \begin{aligned} \frac{(793\text{ mm Hg})(4.65 \text{ L})}{(22 \text{ $^\circ$C})} & = \frac{(743 \text{ mm Hg})V_2}{(35\text{ $^\circ$C})} \\ \\ V_2 & = 7.9\text{ L}\end{aligned}[/tex]
Therefore, the final volume is about 7.9 L.
A type of reaction that gives off energy is called
Answer:
exothermic
Explanation:
in exothermic reactions, more energy is released when the bonds are formed in the products than is used to breake the bonds in the reactants.