The mean salary of federal government employees on the General Schedule is $59,593. The average salary of 32 state employees who do the similar work is $59,000 with standard deviation of $1500. At the 0.01 level of significance, can it be concluded that state employees earn on average less than federal employees?

To test the null hypothesis that the variance of the first group is twice as big as that of the second group in two independent normal random samples, you can use the F-test. The null hypothesis (H0) would be stated as follows:

[tex]H0: σ1^2 = 2 * σ2^2[/tex]

To conduct the F-test, calculate the F-statistic using the sample variances (s1^2 and s2^2) from both groups:

F = s1^2 / (2 * s2^2)

Next, compare the calculated F-statistic to the critical F-value found in the F-distribution table at a chosen significance level (typically α = 0.05) and degrees of freedom for both groups (n1-1 and n2-1).

If the F-statistic is greater than the critical F-value, you would reject the null hypothesis, concluding that there is significant evidence that the variance of the first group is not twice as big as that of the second group. If the F-statistic is less than or equal to the critical F-value, you would fail to reject the null hypothesis, indicating that there isn't enough evidence to conclude that the variances are different as stated.

Learn more about hypothesis here:

https://brainly.com/question/31319397

#SPJ11

The solution is, : y = 1/3x+6, is the equation of a line that is perpendicular to the line y= -3x+2 and passes through the point (6,8).

We know that,

y = -3x+2 is in slope intercept form  y = mx+b  where m is the slope and b is the y intercept

The slope is -3

Perpendicular lines have slopes that are negative reciprocals

The slope of the perpendicular line is  -1/-3 = 1/3

The equation of the new line is

y = 1/3x +b

Using the point that passes through the line ( 6,8) and substituting in for x and y

8 = 1/3(6) +b

8 = 2+b

8-2 =b

6 =b

The equation becomes

y = 1/3x+6.

To learn more on Equation 0f Straight-Line click:

brainly.com/question/11116168

#SPJ1

The length of the side p is given as 11.2.

By applying the Law of Sines, we can find the length of any side of the triangle. The law of sines states that for any triangle with sides of lengths a, b, and c opposite angles A, B, and C, respectively.

Mathematically,

sin A / a = sin B / b = sin C / c

In this case, we know the values of sin P and sin R, and the length of side r. We want to find the length of side p. We can set up the equation as follows:

sin P / p = sin R / r

Substituting the given values, we get:

sin P / p = 0.5 / 14

Solving for p, we get:

p = sin P / (0.5 / 14)

p = sin P * 28

p = 0.4 * 28

p = 11.2

Therefore, the length of side p is 11.2.

Learn more about triangle here:

https://brainly.com/question/17335144

#SPJ1

there are 4 kind of marble

6 possibilities of different chosing

6+4 = 10

The correct order of steps is 1, 2, 3, 4. And the conditional probability that exactly four heads appear when a fair coin is flipped five times, given that the first flip came up tails, is 1/16.

To find the conditional probability that exactly four heads appear when a fair coin is flipped five times, given that the first flip came up tails, we need to follow these steps in order:
1. Identify the total number of possible outcomes when a fair coin is flipped five times, which is 2^5 = 32.
2. Determine the number of outcomes in which the first flip is tails, which is also 16.
3. Out of the 16 outcomes where the first flip is tails, identify the number of outcomes in which exactly four heads appear. There is only one such outcome: THHHH.
4. Calculate the conditional probability by dividing the number of favourable outcomes (i.e. THHHH) by the number of total outcomes given the condition (i.e. the first flip is tails), which is 1/16.
Therefore, the correct order of steps is 1, 2, 3, 4. And the conditional probability that exactly four heads appear when a fair coin is flipped five times, given that the first flip came up tails, is 1/16.

To learn more about conditional probability, refer:-

https://brainly.com/question/30144287

#SPJ11

We can start by finding Jerry's pay rate per second:

Pay rate per second = $10,000 / 114 seconds = $87.72 per second

Then, we can calculate Jerry's earnings for 30 minutes (1800 seconds):

Earnings for 30 minutes = $87.72 per second x 1800 seconds = $157,896

Therefore, Jerry will make $157,896 in 30 minutes based on his pay rate of $10,000 in 114 seconds.

Answer:

{(12, 3), (11, 2), (10, 1), (9, 0), (8, 1), (7, 2), (6, 3)}

Step-by-step explanation:

In a function, all x-coordinates must be different.

{(7, 2), (100, 10), (13, –7), (7, 9), (10, 100), (4, –2), (5, 5)}

7 appears twice as an x-coordinate. Not a function.

{(1000, 10), (1000, 12), (1000, 16), (100, 5), (100, 7), (78, 3), (90, 5)}

1000 appears 3 times as an x-coordinate. Not a function.

{(6, 3), (5, 2), (4, 1), (3, 0), (4, –1), (5 ,–2), (6 ,–3)}

4 appears twice as an x-coordinate. Not a function.

{(12, 3), (11, 2), (10, 1), (9, 0), (8, 1), (7, 2), (6, 3)}

All x-coordinates are different. Function.

Answer:

243π

Step-by-step explanation:

Area of the entire circle = πr² = π18² = 324π

Area of sector = (90/360)π(18)² = 81π

Shaded area = 324π - 81π = 243π

The expression using the greatest common factor is 6x²(x⁸ - 16).

The complete factored form of the expression is 6x²(x⁴ + 4)(x² + 2)(x² - 2).

The greatest common factor of function 6x¹⁰ - 96x², is 6x².

6x¹⁰ - 96x² = 6x²(x⁸ - 16)

The complete factorization of the expression is calculated as follows;

expand the function x⁸ - 16;

x⁸ - 16 = (x⁴ + 4)(x⁴ - 4)

We can also simplify the function x⁴ - 4 further as shown below;

x⁴ - 4 = (x² + 2)(x² - 2)

The complete factored form of the function 6x¹⁰ - 96x² is calculated as;

6x¹⁰ - 96x²  = 6x²(x⁴ + 4)(x² + 2)(x² - 2)

Learn more about factorization here: https://brainly.com/question/25829061

#SPJ1

The true statements about the populations and land areas are:

The population density of an area is obtained by dividing the population of the city or village by the area or land mass. Population density is defined as the population per unit of land area.

Based on the available information, we can say that the population density of city B is obtained with the ratios of population and density. Also, the calculation of the population densities will show that City B is greater than City C.

Learn more about population densities here:

https://brainly.com/question/13902749

#SPJ1

The value of sin A to the nearest hundredth is,

⇒ sin A = 0.86

We have to given that;

Triangle ABC shown in figure, with sides of lengths,

AB = 11

BC = 9.5

CA = 6

Hence, We get;

sin A = BC / AB

sin A = 9.5 / 11

sin A = 0.86

Thus, The value of sin A to the nearest hundredth is,

⇒ sin A = 0.86

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

This sequence does not converge because it does not approach a single value as n goes to infinity. The sequence appears to oscillate between certain values, specifically {1/5, 1/2, 1/6, 1/3, 1/7, 1/4, 1/8, 1/5,...}.

Therefore, the limit does not exist (DNE).
The given sequence is {1/5, 1/2, 1/6, 1/3, 1/7, 1/4, 1/8, 1/5,...}. To determine whether this sequence converges or diverges, let's find a pattern:

The numerators are always 1. To find the pattern in the denominators, we can examine their differences: (5-2), (6-2), (7-3), (8-4), and so on. We observe that the differences are increasing by 1 each time: 3, 4, 4, 4,...

Now let's write down the denominators based on this pattern: 5, 2, 6, 3, 7, 4, 8, 5,... . The denominators repeat after every four terms, which means the sequence is periodic with a period of 4.

A periodic sequence does not have a unique limit because the terms keep oscillating between different values. Therefore, this sequence diverges, and the answer is DNE (does not exist).

Visit here to learn more about converge brainly.com/question/29258536

#SPJ11

Answer:

For the given information, let's solve the following:

a. Do you know that the period of a function is the time taken for one complete cycle of the function? In this case, the Ferris wheel takes one rotation every 80 seconds, which means it completes one cycle in 80 seconds. Therefore, the period of the function is 80 seconds.

b. To write f(t) in the form of f(t) = a sin b(t-h) + k, we first need to determine the amplitude, period, and phase shift of the function. The amplitude is half the distance between the highest and lowest points of the function, which is (102-94)/2 = 4 feet. The period is 80 seconds, which we found in part a. The phase shift is 0 since the ride starts at the highest point. Therefore, the function can be written as f(t) = 4 sin (2π/80)t + 102.

c. To graph the function, we can plot the height of the car (y-axis) against time (x-axis), using the function obtained in part b.

d. To find the value of f(15), we simply substitute t = 15 in the function obtained in part b. f(15) = 4 sin (2π/80)(15) + 102 = 98.28 feet. This makes sense because after 15 seconds, the car would have traveled a quarter of a cycle and would be descending from the highest point.

e. To find f(180), we can use the fact that the Ferris wheel takes one rotation every 80 seconds. Therefore, after 180 seconds, the wheel would have completed two full cycles and would be back at the highest point. Therefore, f(180) = 102 feet.

I hope this helps! Let me know if you have any further questions or if there's anything else I can assist you with.

MARK AS BRAINLIEST!!!

Therefore, the correct option is (b) 46 that is the number of students who like Twix and Reese's peanut butter cups only (region D) by principle of inclusion-exclusion, we need to subtract the number of students who like Snickers, as well as the number of students who like all three kinds of candy, from the number of students who like Twix and Reese's peanut butter cups along with one or both of the other kinds of candy.

We can start by using the principle of inclusion-exclusion, which tells us that:

|A ∪ B ∪ C| = |A| + |B| + |C| - |A ∩ B| - |A ∩ C| - |B ∩ C| + |A ∩ B ∩ C|

where |X| denotes the number of elements in set X.

Using the numbers given in the problem, we have:

|A| = 129

|B| = 118

|C| = 145

|A ∩ B| = 22

|B ∩ C| = 54

|A ∩ C| = 55

|A ∩ B ∩ C| = 8

Substituting these values into the formula, we get:

|A ∪ B ∪ C| = 129 + 118 + 145 - 22 - 55 - 54 + 8 = 269

This tells us that 269 students like at least one of the three kinds of chocolate candy.

To find the number of students who like Twix and Reese's peanut butter cups only (region D), we need to subtract the number of students who like Snickers, as well as the number of students who like all three kinds of candy, from the number of students who like Twix and Reese's peanut butter cups along with one or both of the other kinds of candy:

|D| = |B ∩ C| - |A ∩ B ∩ C|

= 54 - 8

= 46

To know more about principle of inclusion-exclusion,

https://brainly.com/question/27975057

#SPJ11

The surface with the given vector equation is a portion of a cone with the axis along the y-axis and opening angle of 90 degrees.

The surface with the given vector equation r(s, t) = (s sin(9t), s^2, s cos(9t)) is a helicoid. The helicoid is generated by a line segment moving along a helical path while remaining perpendicular to the helix's axis. In this case, the helicoid has a variable height s^2 and is wrapped around the z-axis with a frequency of 9.

Vector equations are used to represent the lines or planes in a three-dimensional framework. The three-dimensional plane requires three coordinates with respect to the three-axis and here the vectors are helpful to easily represent the vector equation of a line or a plane. In a three-dimensional framework the unit vector along the x-axis is ^i, the unit vector along the y-axis is ^j, and the unit vector along the z-axis is ^k.

Visit here to learn more about  vector equation : https://brainly.com/question/18848864
#SPJ11

The weight of one green triangle is equal to: D. -2.

In this scenario and exercise, you are required to write a system of equations that represents the balance by using the balance shown in the image attached below and then determine the weight of one green triangle.

Since it is a balance, we can reasonably infer and logically deduce that all of the pink squares (s) and green triangles (t) on the left-hand side must be equal to the all of the parameters (numerical values) on the right-hand side of the balance as follows;

3s + 2t = 5    ......equation 1

2s + 5t = -4    ......equation 2

By solving the system of equations simultaneously using the elimination method and multiplying equation 2 by 3/2, we have:

3s + 2t = 5

3s + 7.5t = -6

(3s - 3s) + (2t - 7.5t) = (5 + 6)

-5.5t = 11

t = -11/5.5

t = -2.

Read more on equation here: brainly.com/question/25858757

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

Answer:

3 months

Step-by-step explanation:

To find the amount of months, m, we will have to solve the equation given. If you don't have any experience solving equations, this could be tricky, but hopefully my work below will be helpful.

15m + 35 = 10(m + 5)

15m + 35 = 10m + 50

15m - 10m + 35 = 10m - 10m + 50

5m + 35 = 50

5m + 35 - 35 = 50 - 35

5m = 15

5m/5 = 15/5

m = 3

After 3 months the cost of the gyms will be the same. Let me know if you need more clarification or were confused by my work. :)

To make wheels of a diameter of 67.5 mm and a width of 29.3 mm, Alfie requires 104891.38 cubic mm volume of plastic.

A cylinder is a 3-Dimensional shape with 3 faces that are one curved face and 2 flat ends. The volume of a cylinder is given by the expression:

V = π[tex]r^2h[/tex]

r is the radius

h is the height

Given, diameter = 67.5 mm

radius = d ÷ 2 = 67.5 ÷ 2

= 33.75 mm

height = width = 29.3 mm

Volume = [tex]\frac{22}{7}*33.75*33.75*29.3[/tex]

= 104891.38 cubic mm

Therefore, the volume of the cylindrical wheel that Alfie designed is 104891.38 cubic mm.

Learn more about volume:

https://brainly.com/question/27535498

#SPJ4

Consider three random variables, U, V, and W. The answer is E(W) = 2.

To solve for E(W), we need to use the fact that U is equal to both 3V+2 and 5W-23. We can set these two expressions equal to each other:

3V + 2 = 5W - 23

Solving for V in terms of W, we get:

V = (5W - 25) / 3

Now we can use the formula for the expected value of a linear function of a random variable:

E(aX + b) = aE(X) + b

In this case, we have:

V = (5W - 25) / 3

So:

E(V) = E((5W - 25) / 3) = (5/3)E(W) - 25/3

We know that E(V) = -5, so we can substitute that in:

-5 = (5/3)E(W) - 25/3

Solving for E(W), we get:

E(W) = (-5 + 25/3) / (5/3) = 2

Know more about expected value here:

https://brainly.com/question/29574962

#SPJ11

A significant deviation from the expected value of 425 grams for the bag filling machine. The manufacturer should investigate and adjust the machine to ensure that it is distributing the correct amount of chocolate chips in each bag.

Based on the information provided, the manufacturer of chocolate chips is interested in determining if there is a deviation from the expected value of 425 grams for the bag filling machine. They have collected a sample of 18 bags and calculated a mean of 416 grams with a standard deviation of 19. Assuming a normal distribution, they would like to determine the p-value of the test statistic with a significance level of 0.01.

To do this, they would conduct a one-sample t-test using the formula:

t = (x - μ) / (s / √n)

where x is the sample mean, μ is the population mean (expected value), s is the sample standard deviation, and n is the sample size.

Plugging in the values, we get:

t = (416 - 425) / (19 / √18) = -2.21

Using a t-distribution table or calculator with 17 degrees of freedom (n-1), we can find the p-value associated with a t-score of -2.21 and a one-tailed test (since we are interested in whether the bags are underfilled). The p-value is approximately 0.0212, which is less than the significance level of 0.01. Therefore, we reject the null hypothesis and conclude that the bags are likely being underfilled by the bag filling machine at the 425-gram setting.

In summary, the p-value of the test statistic is approximately 0.0212, indicating a significant deviation from the expected value of 425 grams for the bag filling machine. The manufacturer should investigate and adjust the machine to ensure that it is distributing the correct amount of chocolate chips in each bag.

Learn more about deviation here:

brainly.com/question/29183849

#SPJ11

A significant deviation from the expected value of 425 grams for the bag filling machine. The manufacturer should investigate and adjust the machine to ensure that it is distributing the correct amount of chocolate chips in each bag.

Based on the information provided, the manufacturer of chocolate chips is interested in determining if there is a deviation from the expected value of 425 grams for the bag filling machine. They have collected a sample of 18 bags and calculated a mean of 416 grams with a standard deviation of 19. Assuming a normal distribution, they would like to determine the p-value of the test statistic with a significance level of 0.01.

To do this, they would conduct a one-sample t-test using the formula:

t = (x - μ) / (s / √n)

where x is the sample mean, μ is the population mean (expected value), s is the sample standard deviation, and n is the sample size.

Plugging in the values, we get:

t = (416 - 425) / (19 / √18) = -2.21

Using a t-distribution table or calculator with 17 degrees of freedom (n-1), we can find the p-value associated with a t-score of -2.21 and a one-tailed test (since we are interested in whether the bags are underfilled). The p-value is approximately 0.0212, which is less than the significance level of 0.01. Therefore, we reject the null hypothesis and conclude that the bags are likely being underfilled by the bag filling machine at the 425-gram setting.

In summary, the p-value of the test statistic is approximately 0.0212, indicating a significant deviation from the expected value of 425 grams for the bag filling machine. The manufacturer should investigate and adjust the machine to ensure that it is distributing the correct amount of chocolate chips in each bag.

Learn more about deviation here:

brainly.com/question/29183849

#SPJ11

Answer:

To create the cylindrical travel case, we need approximately 588.75 square inches of leather.

The option that would result in the highest overall cost for the employee is C. Option A has the highest overall cost by $32.50.

Option A:

Monthly premium = $75

Out-of-pocket cost for prescriptions = 0.2 × $1250

Total monthly cost = $75 + $250 = $325

Option B:

Monthly premium = $45

Out-of-pocket cost for first $600 in prescriptions = 25% × $600 = $150

Out-of-pocket cost for prescriptions over $600 = $97.50

Total monthly cost = $29250

he correct option is C.

Learn more about cost on

https://brainly.com/question/25109150

#SPJ1

let's firstly convert the mixed fractions to improper fractions, then subtract.

[tex]\stackrel{mixed}{9\frac{6}{7}}\implies \cfrac{9\cdot 7+6}{7}\implies \stackrel{improper}{\cfrac{69}{7}}~\hfill \stackrel{mixed}{2\frac{3}{7}} \implies \cfrac{2\cdot 7+3}{7} \implies \stackrel{improper}{\cfrac{17}{7}} \\\\[-0.35em] ~\dotfill\\\\ \cfrac{69}{7}~~ - ~~\cfrac{17}{7}\implies \cfrac{69-17}{7}\implies \cfrac{52}{7}\implies 7\frac{3}{7}[/tex]

Answer:

4th option

Step-by-step explanation:

to find the surface you need to find the area of the base square first.

7 in × 7 in = 49 in^2

then find the triangular sides

9 in × 7 in × 1/2 =31.5 in^2

31.5 in^2 × 4 = 126 in^2

so 126in^2 +49in^2 = 175in^2

To compare the quantitative responses to the two conditions in a paired design, the differences between the response within each pair are used. These paired differences can be compared to the appropriate statistical procedures to determine the significance of the results.

For paired designs, the appropriate statistical procedure is the one-sample t procedure. This procedure is used to compare the mean of the paired differences to a hypothesized value, such as zero. The null hypothesis is that the mean difference is equal to zero, indicating no significant difference between the two conditions. If the calculated t-value is greater than the critical value, the null hypothesis can be rejected, indicating a significant difference between the two conditions.

In cases where the sample size is large and the population standard deviation is known, the two-sample z procedure can also be used. This procedure compares the difference between the means of the two samples to a hypothesized value. However, this procedure is less commonly used for paired designs.

The two-sample t procedure is used for independent designs, where two samples are selected from different populations. This procedure compares the means of the two samples to each other, rather than comparing the paired differences within each sample.

In summary, for paired designs, the appropriate statistical procedure is the one-sample t procedure, while the two-sample z procedures and the two-sample t procedures are used for independent designs.

To learn more about Standard deviation, visit:

https://brainly.com/question/475676

#SPJ11

The amount for each category is given as:

Initially, we must determine how much of each crop is present:

By now, we are able to construct the circle graph by knowing that a circle comprises of 360 degrees, assorted degrees can aid us in identifying every classification of crops:

To find out the amount for each category, we need to compute each percentage share:

Given this information, we can proceed and develop the circle graph.

Make use of a clean and circular diagram and divide it into three proportional parts using their corresponding degree values, then label every section with its matching crop name alongside the respective percentage owned.

Read more about circle graph here:

https://brainly.com/question/24461724

#SPJ1

The farmer has the following distribution of crops:

Corn - 40%

Wheat - 35%

Cotton - 25%

A farmer uses his land to grow soybeans, corn, wheat, and cotton. He has a total of 500 crops consisting of corn, wheat, and cotton. The distribution of these crops is 40% corn, 35% wheat, and 25% cotton. Sketch a circle graph and label it with percentages.

It will take approximately 14.4 years for $2,700 to grow to $15,000 at a 6% compound interest rate, compounded semiannually.

A equals the projected value, in this case $15,000.

P is equal to the current value, in this case $2,700.

r = 6%, or 0.06 in decimal form, is the yearly interest rate.

The number n represents the number of times the interest is compounded yearly (because it is compounded twice annually).

t = the duration in years

Using the values we hold in place of:

15000 = 2700(1 + 0.06/2)^(2t)

by 2700, divide both sides.

15000/2700 = (1 + 0.06/2)^(2t)

Simplify:

5.56 = (1.03)^(2t)

Consider both sides' natural logarithms:

ln(5.56) = ln(1.03)^(2t)

Using the logarithm property, ln(ab) = b ln(a),

ln(5.56) = 2t ln(1.03)

Subtract the two sides by 2 ln(1.03):

t = ln(5.56) / (2 ln(1.03))

t ≈ 14.4

Learn more about compound interest at

https://brainly.com/question/2479922

#SPJ4

The complete oxidation of linoleic acid (C18H32O2) produces 16 reducing equivalents.

To determine the number of reducing equivalents produced by the complete oxidation of linoleic acid (C18H32O2), we need to follow these steps:

1. Determine the number of hydrogen atoms in linoleic acid: Linoleic acid has the molecular formula C18H32O2, which contains 32 hydrogen atoms.    
     
2. Divide the number of hydrogen atoms by 2: Since 1 mole of electrons is donated by 1 reducing equivalent, and each pair of hydrogen atoms (H2) contributes 2 moles of electrons, we need to divide the number of hydrogen atoms by 2 to find the number of reducing equivalents.

32 hydrogen atoms ÷ 2 = 16 reducing equivalents

So, the complete oxidation of linoleic acid (C18H32O2) produces 16 reducing equivalents.

visit here to learn more about hydrogen atoms:

brainly.com/question/29695801

#SPJ11