Answer:
Δl = 93.24 mm
explanation:
Given:
length of steel arch bridge, [tex]i=518m[/tex]
temperature difference Δ[tex]t=35-20=15c[/tex]
a rod may freely rotate about an axis that is perpendicular to the rod and is along the plane of the page. the rod is divided into four sections of equal length of 0.2m each
Understood. The rod you described can freely rotate about an axis that is perpendicular to the rod and lies along the plane of the page.
The rod is divided into four equal sections, each with a length of 0.2 meters.
To know more about freely rotate refer here
https://brainly.com/question/31634294#
#SPJ11
What is the volume of a lead ball at 36.00°C if the ball's volume at 64.00°C is 59.00 cm3? Give your answer to four significant figures. The linear expansion coefficient of lead is 29.00 × 10-6 /C°.
The volume of the lead ball at 36.00°C is 58.95 cm3. We can round this to four significant figures, giving a final answer of 58.95 cm3.
To solve this problem, we can use the formula for linear thermal expansion:
ΔL = αLΔT
where ΔL is the change in length, α is the linear expansion coefficient, L is the original length, and ΔT is the change in temperature.
We can rearrange this formula to solve for the change in volume:
ΔV = 3αVΔT
where ΔV is the change in volume, 3 is the number of dimensions, α is the linear expansion coefficient, V is the original volume, and ΔT is the change in temperature.
Using this formula, we can find the change in volume between 64.00°C and 36.00°C:
ΔV = 3αVΔT
ΔV = 3(29.00 × 10-6 /C°)(59.00 cm3)(-28.00°C)
ΔV = -0.046 cm3
To know more about volume visit:-
https://brainly.com/question/28058531
#SPJ11
by t = 15 min, the universe had cooled enough that nucleosynthesis ended.T/F
False. Nucleosynthesis refers to the process by which lighter atomic nuclei are formed from the fusion of protons and neutrons.
It primarily occurs during the early stages of the universe, specifically during the first few minutes after the Big Bang. This period is known as primordial nucleosynthesis or Big Bang nucleosynthesis.
During the first few minutes of the universe's existence, the conditions were extremely hot and dense. The high temperatures and energies allowed for nuclear reactions to take place, resulting in the synthesis of light elements such as hydrogen (H), helium (He), and traces of lithium (Li) and beryllium (Be). The abundance of these elements in the universe is consistent with the predictions of Big Bang nucleosynthesis.
The process of nucleosynthesis begins shortly after the initial expansion of the universe and continues for a brief period. As the universe expands and cools down, the conditions necessary for nuclear reactions become less favorable. The nucleosynthesis reactions require a high density of particles and high temperatures to overcome the electrostatic repulsion between positively charged protons.
By the time the universe was approximately 15 minutes old, it had expanded and cooled to a point where the conditions for nucleosynthesis were no longer suitable. The temperature had dropped below the threshold required to sustain the fusion reactions responsible for nucleosynthesis. At this point, the universe had cooled to a temperature of about 1 billion Kelvin (10^9 K), which was too low to support the formation of heavier elements through fusion processes.
Therefore, it is true that by t = 15 minutes, the universe had cooled enough that nucleosynthesis had largely ended. The majority of the light elements that were synthesized during the early stages of the universe had already formed by this time. However, it is important to note that small amounts of nucleosynthesis may continue to occur in certain astrophysical environments, such as in stars and during supernova explosions, where the conditions are favorable for nuclear reactions to take place.
Learn more about Nucleosynthesis here
https://brainly.com/question/13517558
#SPJ11
A capacitor in a series RC circuit is charged to 60% of its maximum value in 1.0 s. Find the time constant of the circuit. OT-3.5 s OT = 0.72 s OT = 1.09 s OT=2.0s
The time constant (symbolized by the Greek letter tau, τ) of an RC circuit is given by the formula:
τ = RC
where R is the resistance and C is the capacitance. In this case, the capacitor reaches 60% of its maximum value in 1.0 second.
We can use the formula for the charging or discharging of a capacitor in an RC circuit:
V(t) = V_0 * (1 - e^(-t/τ))
where V(t) is the voltage across the capacitor at time t, V_0 is the maximum voltage across the capacitor, and e is the base of the natural logarithm.
Given that the capacitor reaches 60% of its maximum value, we have:
V(t) = 0.6 * V_0
Substituting these values into the equation and solving for t/τ, we get:
0.6 * V_0 = V_0 * (1 - e^(-t/τ))
0.6 = 1 - e^(-t/τ)
e^(-t/τ) = 0.4
Taking the natural logarithm of both sides, we have:
-t/τ = ln(0.4)
Solving for t/τ, we get:
t/τ = -ln(0.4)
Finally, solving for τ, we have:
τ = -t / ln(0.4)
Substituting the given time value of 1.0 second, we have:
τ = -1.0 / ln(0.4) ≈ 1.09 s
Therefore, the time constant of the circuit is approximately 1.09 seconds. The correct option is OT = 1.09 s.
To know more about capacitance refer here
https://brainly.com/question/31871398#
#SPJ11
an absorption spectrum is also called a bright line spectrum.
a. true b. false
The statement is b. false. An absorption spectrum is not called a bright line spectrum. They are two distinct types of spectra.
An absorption spectrum displays dark lines where specific wavelengths of light have been absorbed, while a bright line spectrum, also known as an emission spectrum, shows bright lines at specific wavelengths where light has been emitted.
An absorption spectrum is a pattern of dark lines or bands in an otherwise continuous spectrum of light, which is caused by the absorption of specific wavelengths of light by atoms or molecules.
When light passes through a material, such as a gas, some of the light may be absorbed by the atoms or molecules in the material. The absorbed energy causes the electrons in the atoms or molecules to move to higher energy levels. This leaves gaps, or "excited states", in the energy levels of the atoms or molecules.
When the electrons return to their original energy levels, they emit the absorbed energy as light at specific wavelengths. However, if the light source is behind the gas, the absorbed wavelengths will be missing from the transmitted light, creating a series of dark absorption lines.
Visit here to learn more about absorption spectrum brainly.com/question/31230618
#SPJ11
what is the condition for total internal reflection between two mystery transparent materials? na = 1.65 and nb = 2.12.
For total internal reflection to occur between two transparent materials, the incident angle of the light ray must be greater than the critical angle. The critical angle can be calculated using the refractive indices of the two materials.
In this case, with material A having a refractive index of 1.65 and material B having a refractive index of 2.12, we can determine the critical angle using the formula: critical angle = arcsin(nb/na). The condition for total internal reflection to occur is when the incident angle is greater than the critical angle.
The critical angle is determined by the refractive indices of the two materials, with material A having a refractive index of na and material B having a refractive index of nb. The formula to calculate the critical angle is given by:
critical angle = arcsin(nb/na)
In this case, with na = 1.65 and nb = 2.12, we can substitute these values into the formula:
critical angle = arcsin(2.12/1.65)
Using a calculator, we can evaluate the arcsine of the ratio, which gives us the critical angle. If the incident angle of the light ray is greater than this critical angle, total internal reflection occurs.
Therefore, the condition for total internal reflection between the two mystery transparent materials with refractive indices na = 1.65 and nb = 2.12 is that the incident angle of the light ray must be greater than the critical angle calculated using the formula arcsin(2.12/1.65).
Learn more about total internal reflection here: brainly.com/question/13088998
#SPJ11
9. a neutron has a kinetic energy of 10 mev. what size aperture would be necessary to observe diffraction effects? a. 3.6 x 10-21 m b. 3.0 x 10-23 m c. 2.8 x 10-13 m d. 1.7 x 10-27 m e. 9.0 x 10-15 m
From the calculated de Broglie wavelength of 2.545 × 10⁻¹⁴ m, we can see that option (c) 2.8 × 10⁻¹³ m is the closest match to the required size aperture to observe diffraction effects for the given neutron's kinetic energy of 10 MeV.
To determine the size aperture necessary to observe diffraction effects for a neutron with a kinetic energy of 10 MeV, we can use the de Broglie wavelength. The de Broglie wavelength (λ) can be calculated using the following equation:
λ = h / p
where λ is the wavelength, h is the Planck constant (6.62607015 × 10⁻³⁴ J s), and p is the momentum of the neutron.
The momentum (p) of the neutron can be calculated using the equation:
p = √(2mE)
where m is the mass of the neutron (1.675 × 10⁻²⁷ kg) and E is its kinetic energy (10 MeV).
First, let's convert the kinetic energy from MeV to joules:
10 MeV = 10 × (1.602 × 10⁻²⁷) J
= 1.602 × 10⁻¹² J
Now, calculate the momentum (p):
p = √(2 × 1.675 × 10⁻²⁷ kg × 1.602 × 10⁻¹²J)
= 2.601 × 10⁻²⁰ kg·m/s
Finally, we can calculate the de Broglie wavelength (λ):
λ = (6.62607015 × 10⁻³⁴ J s) / (2.601 × 10⁻²⁰ kg·m/s)
= 2.545 × 10⁻¹⁴ m
From the calculated de Broglie wavelength of 2.545 × 10^-14 m, we can see that option (c) 2.8 × 10^-13 m is the closest match to the required size aperture to observe diffraction effects for the given neutron's kinetic energy of 10 MeV.
To know more about de broglie wavelength
https://brainly.com/question/31980770
#SPJ4
A vertical cylindrical soil column of 100 cm2 cross-sectional area and 50 cm height is filled with a homogeneous soil that is saturated and has 10 cm of water continuously ponded on it. The steady state volume flow rate (Q) through the soil column is 1000 cm3/hr (downward). What is the hydraulic conductivity of the soil sample? ΔΗ Governing Equation? Q = -KA AL Q AL Solving for? K = Α ΔΗ A = 100 cm2 Q= 1000 cm3/hr K= ? AL= 50 cm AH= 60 cm
The formula K = Q / (A * ΔH) is used, the hydraulic conductivity of the soil sample is calculated as K = 1000 cm³/hr / (100 cm² * 60 cm), resulting in a value of approximately 0.1667 cm/hr.
What is the estimated hydraulic conductivity of the soil sample?The hydraulic conductivity of the soil sample, estimated to be approximately 8.33 cm/hr, indicates the soil's ability to transmit water under steady-state conditions. This value is obtained by applying Darcy's law, which relates the volume flow rate (Q) to the hydraulic conductivity (K), cross-sectional area (A), and change in hydraulic head (ΔH) over the length (L) of the soil column.
In this scenario, a vertical cylindrical soil column with a cross-sectional area of 100 cm2 and a height of 50 cm is filled with a homogeneous soil. The soil is saturated, and there is a continuous 10 cm of water ponded on top. The steady state volume flow rate (Q) through the soil column is given as 1000 cm3/hr in a downward direction.
By rearranging Darcy's law equation and substituting the given values, the hydraulic conductivity (K) is calculated to be approximately 8.33 cm/hr. This value provides insights into the soil's permeability and its ability to facilitate water movement.
Learn more about hydraulic conductivity
brainly.com/question/31920573
#SPJ11
amy needs 5.0 v for some integrated circuit experimetns. she ses a 6.0-v battery and two resistors to make a voltage divider. one resistor is 330 ohlms. she decides to make the other resistor smaller. what value should it have?
The value of the second resistor needed for Amy's voltage divider to provide 5.0 V
To determine the value of the second resistor needed for Amy's voltage divider to provide 5.0 V, we can use the voltage divider formula:
V_out = V_in * (R2 / (R1 + R2))
Where V_out is the desired output voltage (5.0 V), V_in is the input voltage from the battery (6.0 V), R1 is the value of the first resistor (330 ohms), and R2 is the value of the second resistor.
Rearranging the formula to find R2, we get:
R2 = (V_out * (R1 + R2)) / V_in
Plugging in the known values and solving:
R2 = (5.0 * (330 + R2)) / 6.0
R2 = (1650 + 5R2) 6.0
R2 = 275 + 5/6R2
R2 - 5/6R2 = 275
0.1667 R2 = 275
R2 = 165
Solving for R2, we find that its value should be approximately 165 ohms.
More on resistors: https://brainly.com/question/31483888
#SPJ11
The surprising observational fact about quasars is that they appear Select one: a. to be the largest known structures in the universe, although they produce only modest amounts of energy. b. to be moving rapidly toward us, while emitting large amounts of energy. c. to be associated with ancient supernova explosions. d. to produce the energy output of 1000 galaxies in a volume similar to that of our planetary system.
The surprising observational fact about quasars is that they appear to produce the energy output of 1000 galaxies in a volume similar to that of our planetary system.So option d is correct.
The surprising feature of quasars is their ability to produce the energy output of 1000 galaxies within a volume comparable to that of our planetary system.Quasars are astronomical objects that emit massive amounts of energy, making them some of the most luminous objects in the universe. Despite their compact size, they produce an energy output comparable to 1000 galaxies. This incredible energy generation occurs within a volume similar to that of our planetary system, which is much smaller than the typical size of a galaxy.Therefore option d is correct.
To learn more about galaxy visit: https://brainly.com/question/30489578
#SPJ11
If you want to view your full height in a plane mirror, must the mirror be as tall as you are? Explain using a ray diagram.
No, the mirror does not need to be as tall as you are in order to view your full height. By using a ray diagram, it can be demonstrated that a plane mirror can reflect light in such a way that allows you to see your entire height even if the mirror is smaller than your actual height.
When viewing yourself in a plane mirror, the light rays from different points on your body strike the mirror and reflect off at the same angle. To understand this, imagine a ray diagram with an object (represented by an arrow) and a plane mirror. Let's assume the object's height is greater than the mirror's height. When a ray of light travels from the top of the object to the mirror, it reflects off the mirror and travels to your eye, creating the illusion that the top of the object is at the same height as it actually is. Similarly, rays of light from other points on the object will reflect off the mirror and reach your eye, allowing you to see the entire height of the object. This phenomenon occurs because the angle of reflection is equal to the angle of incidence, creating the perception of a full-height reflection even with a smaller mirror.
To learn more about plane mirror : brainly.com/question/1160148
#SPJ11
when a 4.26 kg object is placed on top of a vertical spring, the spring compresses a distance of 2.63 cm. what is the force constant of the spring?
The force constant (spring constant) of the spring is approximately 1632.32 N/m.
To determine the force constant of the spring, we can use Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement from its equilibrium position.
Hooke's Law can be expressed as:
F = -k * x
Where:
F is the force exerted by the spring,
k is the force constant (also known as the spring constant),
x is the displacement from the equilibrium position.
In this case, when a 4.26 kg object is placed on top of the vertical spring, the spring compresses a distance of 2.63 cm. We need to convert the displacement to meters before proceeding with the calculation:
x = 2.63 cm = 0.0263 m
Using Hooke's Law, we can rearrange the equation to solve for the force constant (k):
k = -F / x
The force exerted by the spring (F) can be calculated using the gravitational force:
F = m * g
Where:
m is the mass of the object,
g is the acceleration due to gravity.
Plugging in the values, we have:
m = 4.26 kg
g ≈ 9.8 m/s^2
F = 4.26 kg * 9.8 m/s^2
Now, we can calculate the force constant (k):
k = -(4.26 kg * 9.8 m/s^2) / 0.0263 m
k ≈ -1632.32 N/m
The negative sign indicates that the spring exerts a restoring force in the opposite direction of the displacement.
To know more about force refer here
https://brainly.com/question/30507236#
#SPJ11
Where in the solar system would we find the Cassini Division?
The Cassini Division is a large gap between the A and B rings of Saturn's rings. Therefore, the Cassini Division can be found in the Saturnian system, which is part of the larger solar system.
The Cassini Division is a large gap between the two main rings of Saturn, known as the A ring and the B ring. It is named after the Italian astronomer Giovanni Cassini, who first observed it in the 17th century.
The Cassini spacecraft, which was launched in 1997 and orbited Saturn from 2004 to 2017, provided detailed observations of the Cassini Division and other features of Saturn's rings. The spacecraft also studied Saturn's moons and atmosphere and made many important discoveries during its mission.
Therefore, the Cassini Division is a feature of Saturn's ring system, which is located in the outer reaches of our Solar System, beyond the asteroid belt, approximately 1.2 billion kilometers (746 million miles) from the Sun.
To learn more about solar systems visit: https://brainly.com/question/2564537
#SPJ11
A police car emitting a siren wail (400 Hz) is driving at v/30 towards a suspect who is fleeing on foot at v/60, where v is the speed of sound. a.) Concept: The distance between the car and suspect Select overall, therefore the frequency observed by the suspect will be --Select- that emitted by the siren. b.) Calculate: What is the frequency the suspect hears? (Make sure your result agrees with part a Hz ---Select--- increases adi /3.5 points decreases a suspect who is fleeing on foot at police car emitting a siren wail ( sound. stays the same ) Concept: he distance between the car and suspect Select -Select- overall, therefore the frequency observed that emitted by the siren. .) Calculate: Vhat is the frequency the suspect hears? (Make sure your result agrees with part al) Hz Submit Answer Save Progress ---Select- higher than lower than the same as en wail (400 Hz) is driving at v/30 toward car and suspect -Select over Select--- that emitted by the siren. b.) Calculate: What is the frequency the suspect hears?
a) The distance between the car and the suspect decreases overall as the police car is driving towards the suspect. Therefore, the frequency observed by the suspect will be higher than that emitted by the siren.
b) To calculate the frequency the suspect hears, we need to consider the Doppler effect. The formula for the apparent frequency observed due to the Doppler effect is:
f' = (v + vr) / (v + vs) * f
Where:
f' is the apparent frequency observed,
v is the speed of sound,
vr is the velocity of the receiver (suspect),
vs is the velocity of the source (police car),
and f is the emitted frequency.
In this case, the suspect is fleeing on foot at v/60, and the police car is driving towards the suspect at v/30. Therefore, vr = v/60 and vs = -v/30 (negative because it's approaching). Plugging these values into the formula, we get:
f' = (v - v/60) / (v - (-v/30)) * 400 Hz
Simplifying further:
f' = (59v/60) / (31v/30) * 400 Hz
f' = 47.742 Hz
Therefore, the frequency the suspect hears is approximately 47.742 Hz.
To know more about frequency refer here
https://brainly.com/question/13034462#
#SPJ11
Calculate the absolute value of the exhausted heat (QC) each second in MJ for the power plant. Grade Summary Deductions Potential c4090. 911 100% Submissions Atternpts remaining: 5 7 8 9 HOME cosO cotan0 asin acos0 sin) % per attempt) detailed view atan) acotan)sinh) cosh) tan 0% h)cotanh( END Degrees Radians VOI BACKSPACE İDELĮ CLEAR Submit Hint Hints: 0% deduction per hint. Hints remaining: 2 Feedback: 4% deduction per feedback 14% Part (e) If the power plant operates for a full day at its rated capacity, how much energy QH in MJ is needed? ー 14% Part (f) If, on average, one ton of coal contains Q = 25 GJ of energy, how many tons nH of coal would the plant need to operate for a day at its rated capacity? /> 14% Part (g) How many tons nc of this coal is exhausted as wasted heat to Qc in a single day?
The absolute value of the exhausted heat (Qc) each second in MJ for the power plant is 2741 MJ.
e) the amount of energy Qh in MJ is 3.53 x 10⁸ MJ
f) the coal would the plant need to operate for a day is 14120 tons.
g) tons of this coal is exhausted as wasted 9460.
Over a single cycle, there will be no change in the internal energy. As a result, the amount of work completed in a single cycle is equal to the heat exchanged. So, by figuring out the effort that was done, we can find the heat that was expended.
W = Pt = (1350 x 10⁶)(1) = 1350 x 10⁶ J
Q = (W/0.33) - W
= W(1/0.33 - 1)
= 2741 x 10⁶ = 2741 MJ
e) W = (1350 x 10⁶) (86400) = 1.1664 x 10¹⁴
Q = (1.1664 x 10¹⁴)/0.33
Q = 3.53 x 10⁸ MJ
f) n = [tex]\frac{Q_h}{Q}[/tex]
= 3.53 x 10¹⁴/25 x 10⁹ = 14120 tons.
g) n = 0.67[tex]\frac{Q_h}{Q}[/tex]
= 0.67([tex]n_g[/tex])
= 0.67(14120)
n = 9460.
Learn more about Absolute value:
https://brainly.com/question/26954538
#SPJ4
a particle moves with velocity v(t)=2t 7 find the distance traveled between t=1 and t=5
The distance traveled by the particle between t=1 and t=5 is 48 units.
How can we calculate the distance traveled by the particle between t=1 and t=5?To determine the distance traveled by the particle, we can integrate the velocity function over the given time interval. The velocity function v(t) = 2t indicates that the particle's velocity is increasing linearly with time. Integrating the velocity function over the interval t=1 to t=5 yields the displacement or distance traveled by the particle during that time.
The integral of 2t with respect to t is t^2, so plugging in the limits of integration, we have (5^2) - (1^2) = 25 - 1 = 24 units. Therefore, the particle traveled a distance of 48 units between t=1 and t=5.
Learn more about distance traveled
brainly.com/question/30344224
#SPJ11
A second order system has a natural angular frequency of 2.0 rad/s and a damped frequency of 1.8 rad/s. What are its (a) damping factor, (b) 100% rise time, (c) percentage overshoot, (c) 2% settling time, and (d) the number of oscillations within the 2% settling time?
(a)
Since , then the damping factor is given by:
ζ
1.8=2.01−ζ2
and ζ = 0.44.
(b)
Since Ωtr, = ½π, then the 100% rise time is given by
π
tr=π2×1.8=0.87s
(c)
The percentage overshoot is given by:
ζ
π
ζ
π
%overshoot=exp(−ζπ1−ζ2)×100%=exp(−0.44π1−0.442)×100%=21%
(d)
The 2% settling time is given by:
(e)
The number of oscillations occurring within the 2% settling time is given by:
A second order system has a natural angular frequency of 2.0 rad/s and a damped frequency of 1.8 rad/s. What are its (a) damping factor, (b) 100% rise time, (c) percentage overshoot, (c) 2% settling time, and (d) the number of oscillations within the 2% settling time?
(a) The damping factor is the ratio of the damped frequency to the natural frequency, which can be obtained from the equation:
ζ1.8=2.01−ζ2Solving for ζ, we get ζ = 0.44.(b) The 100% rise time is the time it takes for the system to reach its final value for the first time. It can be approximated by the formula:
tr=π2×Ωdwhere Ωd is the damped frequency. Substituting Ωd = 1.8 rad/s, we get tr = 0.87 s.(c) The percentage overshoot is the maximum amount that the system exceeds its final value, expressed as a percentage of the final value. It can be calculated by the formula:
%overshoot=exp(−ζπ1−ζ2)×100%where ζ is the damping factor. Substituting ζ = 0.44, we get %overshoot = 21%.(d) The 2% settling time is the time it takes for the system to stay within 2% of its final value. It can be estimated by the formula:
ts=4ζ×ωnwhere ωn is the natural frequency and ζ is the damping factor. Substituting ωn = 2 rad/s and ζ = 0.44, we get ts = 4.54 s.(e) The number of oscillations within the 2% settling time is the number of times that the system crosses its final value within that time interval. It can be found by dividing the 2% settling time by the period of oscillation, which is given by:
T=2πΩdwhere Ωd is the damped frequency. Substituting Ωd = 1.8 rad/s and ts = 4.54 s, we get N = 1.27.About OscillationsOscillations are periodic variations over time of a measurement result, for example in a pendulum swing. The terms vibration or vibration are often used synonymously with oscillation, although vibration actually refers to a specific type of oscillation, namely mechanical oscillation.
Learn More About Oscillations at https://brainly.com/question/12622728
#SPJ11
The simply supported prismatic beam AB carries a uniformly distributed load w per unit length. Draw & label the shear & moment diagrams. Determine the equation of the elastic curve and the maximum deflection of the beam. Calculate the maximum Bending stress, what is the maximum deflection in inches, use the properties of the W8x15 beam given. Let L=144 in., W=0.25 Kips/in, & E=29000 Ksi. Hint: Use either the double or quadruple Integration method.
To solve the problem, we'll use the double integration method to determine the elastic curve, maximum deflection, and maximum bending stress of the beam. We'll start by drawing the shear and moment diagrams.
Given:
1. Beam: W8x15
.2 .Length of the beam: L = 144 in
3. Uniformly distributed load: w = 0.25 kips/in
4. Modulus of elasticity: E = 29000 ksi
Step 1: Drawing the shear diagram
Since the beam is simply supported and carries a uniformly distributed load, the shear diagram will have a triangular shape. The maximum positive shear force occurs at the left support, and the maximum negative shear force occurs at the right support.
Let's label the beam with points A and B, with A being the left support and B being the right support. The shear diagram will start from zero at point A, increase linearly towards the midpoint of the beam, and then decrease linearly back to zero at point B.
|---------|---------|
A B
The maximum positive shear force occurs at A and is given by:
V_max = (w * L^2) / 8
V_max = (0.25 kips/in * (144 in)^2) / 8
V_max = 162 kips
The maximum negative shear force occurs at B and is equal to the negative of V_max.
Step 2: Drawing the moment diagram
The moment diagram for a simply supported beam with a uniformly distributed load will be parabolic in shape. The maximum moment occurs at the midpoint of the beam.
Let's label the midpoint of the beam as C. The moment diagram will start from zero at points A and B and reach its maximum positive value at C. It will be symmetric about the midpoint.
|---------|---------|
A C B
The maximum moment occurs at C and is given by:
M_max = (w * L^2) / 16
M_max = (0.25 kips/in * (144 in)^2) / 16
M_max = 81 kip·in
Step 3: Determining the equation of the elastic curve and maximum deflection
To determine the equation of the elastic curve, we'll integrate the equation for the moment diagram twice. Since the moment equation is a parabolic function, the elastic curve equation will be a cubic function.
Using the double integration method, we'll start with the equation:
θ''(x) = -M(x) / (E * I)
Where θ''(x) is the second derivative of the elastic curve equation with respect to x, M(x) is the bending moment at a given x location, E is the modulus of elasticity, and I is the moment of inertia of the beam's cross-section.
The moment of inertia for a W8x15 beam can be found in beam property tables or calculated using the dimensions of the beam's cross-section. Let's assume a value of I = 60.3 in^4 for this calculation.
Integrating the equation twice will give us the equation for the elastic curve, θ(x):
θ(x) = -∫∫(M(x) / (E * I)) dx dx
θ(x) = -∫∫((-M_max / (E * I)) * (x - L/2)^2) dx dx
θ(x) = -(-M_max / (E * I * 12)) * (x - L/2)^4 + C1(x) + C2
Where C1 and C2 are integration constants determined by applying the boundary conditions. Since the beam is simply supported, we know that the slope at A and B
To know more about elasticity refer here
https://brainly.com/question/14433448#
#SPJ1
this is a continuation of the previous question. assume that capacitor c2 is chosen as 200 nf. what is the maximum value of capacitance c1( in nf)
The maximum value of capacitance C1, when capacitor C2 is chosen as 200 nF, is not constrained or limited, and it can be any value greater than or equal to zero in nanofarads (nF).
To determine the maximum value of capacitance (C1) when capacitor C2 is chosen as 200 nF, we need to consider the total equivalent capacitance in the circuit.
The given circuit diagram is not provided in the question, so I'll provide a general approach based on the assumption that capacitors C1 and C2 are connected in parallel.
When capacitors are connected in parallel, the total equivalent capacitance (C_eq) is calculated by summing the individual capacitance values:
C_eq = C1 + C2
Since C2 is given as 200 nF, we can express the equation as:
C_eq = C1 + 200 nF
However, the maximum value of C1 is not specified in the question. If we assume that there are no other constraints or limitations, we can simply state that the maximum value of C1 can be any value greater than or equal to zero.
Therefore, the maximum value of capacitance C1, when capacitor C2 is chosen as 200 nF, is not constrained or limited, and it can be any value greater than or equal to zero in nanofarads (nF).
Learn more about capacitance here
https://brainly.com/question/27393410
#SPJ11
a standing wave of frequency 5.46 hz is set up on a string 2.4 m long with nodes at both ends and in the center, as shown.
we have a standing wave on a string that is 2.4 meters long. The standing wave has nodes at both ends and in the center.
In a standing wave, nodes are points where the displacement of the wave is always zero. Antinodes, on the other hand, are points where the displacement of the wave is at its maximum. The pattern of nodes and antinodes repeats periodically in a standing wave.
With nodes at both ends and in the center, we can infer that the standing wave on the string has two segments, each with a length of 1.2 meters. The two segments are separated by the node in the center.
The frequency of the standing wave is given as 5.46 Hz, which represents the number of complete cycles of the wave that occur in one second. In other words, it indicates how many times the string oscillates back and forth in a given time interval.
Given the frequency and the length of the string, we can calculate the speed of the wave using the formula:
Speed of wave (v) = Frequency (f) × Wavelength (λ)
In this case, the wavelength is equal to twice the length of each segment of the standing wave (2 × 1.2 m). So, the wavelength is 2.4 meters.
Plugging in the values:
v = 5.46 Hz × 2.4 m = 13.104 m/s
Therefore, the speed of the wave on the string is approximately 13.104 m/s.
To know more about displacement refer here
https://brainly.com/question/29769926#
#SPJ11
A uniform sphere ball with mass m=5 kg and radius r is rolling without slip on a rough horizontal surface toward a spring of stiffness k = 1500 N/m attached to a heavy block resting on a rubber mat nailed into the surface. The block’s mass is M = 100 kg, and the coefficient of friction between it and the rubber mat is μ = 0.85. Suppose the ball impacts the spring with a speed of v = 5 m/s. Will the block move?
Yes, the block will move in the above situation.
When the ball impacts the spring, it exerts a force on the spring. According to Newton's third law of motion, the spring exerts an equal and opposite force on the ball. This force causes the ball to decelerate and eventually come to rest.
The force exerted by the ball on the spring can be calculated using the formula for the force exerted by a spring:
F = kx
where F is the force, k is the stiffness of the spring, and x is the displacement of the spring from its equilibrium position.
Since the ball is rolling without slip, its displacement x can be related to the compression of the spring. The compression of the spring can be found using Hooke's law:
x = -mg/k
where m is the mass of the ball and g is the acceleration due to gravity.
Substituting the values into the equation, we get:
x = -(5 kg)(9.8 m/s²)/(1500 N/m)
x = -0.0327 m
The negative sign indicates that the spring is compressed.
Since the block is resting on the rubber mat, it experiences a frictional force opposing its motion. The maximum static frictional force can be calculated using:
F_friction = μN
where μ is the coefficient of friction and N is the normal force.
The normal force can be calculated as:
N = Mg
Substituting the values into the equation, we get:
N = (100 kg)(9.8 m/s²)
N = 980 N
Substituting the values into the equation for the maximum static frictional force, we get:
F_friction = (0.85)(980 N)
F_friction = 833 N
Since the force exerted by the ball on the spring (F = kx) is greater than the maximum static frictional force, the block will move.
To learn more about frictional force, here
https://brainly.com/question/30280206
#SPJ4
what is the volatility (standard deviation) of investing in the dax from the perspective of a us investor?
To determine the volatility (standard deviation) of investing in the DAX from the perspective of a US investor, we need historical data on the DAX index returns denominated in US dollars.
The volatility can be calculated using the following steps:
1. Gather historical data: Obtain a time series of DAX index returns denominated in US dollars. The returns can be daily, weekly, monthly, or any other desired frequency.
2. Calculate the logarithmic returns: Convert the index returns into logarithmic returns. This can be done by taking the natural logarithm of the ratio of the current day's index value to the previous day's index value.
3. Compute the standard deviation: Calculate the standard deviation of the logarithmic returns. This will provide a measure of the volatility of the DAX returns from the perspective of a US investor.
It's important to note that the volatility can vary depending on the time period and frequency of the data used. Additionally, currency fluctuations between the euro and the US dollar can also impact the volatility from the perspective of a US investor.
If you have access to the historical DAX index returns denominated in US dollars, you can follow the steps outlined above to calculate the volatility. Alternatively, you can provide me with the specific historical data, and I can assist you in calculating the volatility.
To know more about volatility refer here
https://brainly.com/question/30905318#
#SPJ11
what obstacles faced scientists in breaking the sound barrier
Breaking the sound barrier, which is the transition from subsonic to supersonic speed, presented several challenges and obstacles for scientists and engineers. Some of the obstacles faced were:
1. Aerodynamic forces: As an aircraft approaches the speed of sound, it encounters a range of aerodynamic forces that can cause instability and vibrations. These forces include shock waves, which can create areas of high pressure and drag on the aircraft, making it difficult to maintain control.
2. Engine power: Breaking the sound barrier requires a significant amount of engine power to overcome the drag and other aerodynamic forces. Developing engines that were powerful enough to achieve supersonic speeds was a major challenge for scientists and engineers.
3. Structural integrity: The shock waves and other forces encountered during supersonic flight can place significant stress on an aircraft's structure, potentially leading to failure or damage. Designing and building aircraft that could withstand these forces was a major challenge.
4. Instrumentation: To safely break the sound barrier, pilots need accurate and reliable instrumentation to monitor the aircraft's speed, altitude, and other critical parameters.
Developing instrumentation that could function reliably at supersonic speeds was another obstacle that scientists and engineers had to overcome.
In summary, breaking the sound barrier presented several challenges and obstacles, including aerodynamic forces, engine power, structural integrity, and instrumentation. Overcoming these obstacles required significant advances in technology and engineering.
To know more about sound barrier refer here
https://brainly.com/question/31029109#
#SPJ11
Find the position of an object when placed in front of a concave mirror of a focal length 20 cm produces a virtual image twice the size of the object.
To find the position of an object when placed in front of a concave mirror that produces a virtual image twice the size of the object, we can use the mirror formula:
1/f = 1/d_o + 1/d_i
where:
f is the focal length of the mirror,
d_o is the object distance (distance of the object from the mirror),
d_i is the image distance (distance of the image from the mirror).
In this case, we are given that the focal length of the concave mirror is 20 cm and the virtual image formed is twice the size of the object. Let's assume the size of the object is represented by its height, h. Since the virtual image is twice the size of the object, the height of the image will be 2h. Using the magnification formula for mirrors, we have:
magnification = height of image / height of object
2 = (height of image) / h
Now, let's substitute the known values into the mirror formula and the magnification formula:
1/f = 1/d_o + 1/d_i
1/20 = 1/d_o + 1/d_i
2 = (height of image) / h
2 = (height of image) / (height of object)
2 = d_i / d_o
Since the image is virtual, the image distance (d_i) will be negative.
Now we have two equations:
1/20 = 1/d_o - 1/(-d_i)
2 = -d_i / d_o
We can solve these equations simultaneously to find the values of d_o and d_i.
Simplifying the first equation:
1/20 = (d_o - d_i) / (d_o * (-d_i))
1/20 = (d_o - d_i) / (-d_o * d_i)
Multiplying both sides by (-20 * d_o * d_i):
-d_o * d_i = d_o - d_i
Rearranging the terms:
-d_o * d_i + d_o - d_i = 0
d_o - d_o * d_i - d_i = 0
d_o * (1 - d_i) - d_i = 0
d_o - d_o * d_i + d_i = d_o
d_o(1 - d_i) + d_i = d_o
d_o - d_o * d_i + d_i = d_o
d_i(1 - d_o) + d_o = d_o
d_i - d_i * d_o + d_o = d_i
d_i(1 - d_o) + d_o = d_i
Now, we have:
d_o(1 - d_i) + d_i = d_o
d_i(1 - d_o) + d_o = d_i
Simplifying these equations further:
d_o - d_o * d_i + d_i = d_o
d_i - d_i * d_o + d_o = d_i
From the above equations, we can see that both d_o and d_i are equal to each other.
Therefore, the position of the object when placed in front of a concave mirror with a focal length of 20 cm and produces a virtual image twice the size of the object is at the focal length of the mirror, which is 20 cm.
To know more about concave, click here https://brainly.com/question/31379461
#SPJ11
through what potential difference must an electron be accel- erated from rest to have a de broglie wavelength of 500 nm?
To calculate the potential difference required to accelerate an electron to a specific de Broglie wavelength, we can use the de Broglie wavelength formula:
λ = h / p
where λ is the de Broglie wavelength, h is the Planck's constant (approximately 6.626 x 10^(-34) J·s), and p is the momentum of the electron.
The momentum of an electron can be calculated using the equation:
p = m * v
where m is the mass of the electron (approximately 9.109 x 10^(-31) kg) and v is the velocity of the electron.
Since the electron is initially at rest, its initial velocity (v₀) is zero. We need to find the final velocity (v) that corresponds to the desired de Broglie wavelength.
To find the final velocity, we can use the equation for the kinetic energy of the electron:
K.E. = (1/2) * m * v²
Since the electron is accelerated through a potential difference (V), the kinetic energy gained by the electron is equal to the potential energy difference:
K.E. = q * V
where q is the charge of the electron (approximately -1.602 x 10^(-19) C).
Setting the potential energy difference equal to the kinetic energy, we can solve for the final velocity:
(1/2) * m * v² = q * V
Simplifying, we get:
v² = (2 * q * V) / m
Finally, we can substitute the value of the final velocity (v) in the equation for momentum (p) and then substitute the value of momentum in the de Broglie wavelength equation (λ = h / p).
Let's calculate the potential difference required:
Given:
de Broglie wavelength (λ) = 500 nm = 500 x 10^(-9) m
Step 1: Calculate the final velocity (v)
v² = (2 * q * V) / m
v = √((2 * q * V) / m)
Step 2: Calculate the momentum (p)
p = m * v
Step 3: Calculate the potential difference (V)
λ = h / p
V = (h / λ) * p
Substituting the given values:
h = 6.626 x 10^(-34) J·s
q = -1.602 x 10^(-19) C
m = 9.109 x 10^(-31) kg
λ = 500 x 10^(-9) m
Calculate the final velocity (v):
v = √((2 * (-1.602 x 10^(-19) C) * V) / (9.109 x 10^(-31) kg))
Calculate the momentum (p):
p = (9.109 x 10^(-31) kg) * v
Calculate the potential difference (V):
V = (6.626 x 10^(-34) J·s / (500 x 10^(-9) m)) * p
By performing the calculations, you can determine the potential difference required to accelerate the electron to the given de Broglie wavelength of 500 nm.
To determine the potential difference required to accelerate an electron from rest to a de Broglie wavelength of 500 nm, we can use the de Broglie wavelength equation for particles:
λ = h / p
Where λ is the wavelength, h is Planck's constant (approximately 6.626 x 10^(-34) J·s), and p is the momentum of the particle.
For an electron, the momentum is related to its kinetic energy (K) and mass (m) by the equation:
p = √(2mK)
To calculate the potential difference required, we need to relate the kinetic energy to the potential energy (V) through the electron's charge (e) and the potential difference (ΔV):
K = eΔV
Substituting the expressions for momentum and kinetic energy into the de Broglie wavelength equation, we have:
λ = h / √(2m(eΔV))
Squaring both sides and rearranging the equation, we get:
(eΔV) = (h^2) / (2m(λ^2))
Now we can substitute the given values: λ = 500 nm = 500 x 10^(-9) m, e = 1.6 x 10^(-19) C (charge of an electron), and m = 9.11 x 10^(-31) kg (mass of an electron). Plugging in these values, we can solve for the potential difference (ΔV):
ΔV = (h^2) / (2m(e(λ^2)))
ΔV = ((6.626 x 10^(-34) J·s)^2) / (2(9.11 x 10^(-31) kg)(1.6 x 10^(-19) C)((500 x 10^(-9) m)^2))
Evaluating this expression gives the potential difference required to accelerate the electron to the desired de Broglie wavelength of 500 nm.
Please note that the calculation is based on the given information and assumes a non-relativistic scenario.
Learn more about de Broglie wavelength :
https://brainly.com/question/30404168
#SPJ11
what would be the angle of reflection if the angle between the normal and the incident ray is 17°?
Answer:
The angle of reflection is equal to the angle of incidence, so if the angle between the normal and the incident ray is 17°, then the angle of reflection is also 17°.
Please Mark As Brainliest
how long will it take a projectile to fall freely fromm a bridge 250 feet
To determine the time it takes for a projectile to fall freely from a certain height, we can use the equation for free fall:
h = (1/2) * g * t^2
Where:
h is the height (250 feet in this case)
g is the acceleration due to gravity (approximately 9.8 m/s^2 or 32.2 ft/s^2)
t is the time it takes to fall
However, since you provided the height in feet, we need to convert it to meters first.
1 foot is approximately equal to 0.3048 meters. Therefore, 250 feet is equal to:
250 feet * 0.3048 meters/foot ≈ 76.2 meters
Now we can substitute the values into the equation:
76.2 meters = (1/2) * 9.8 m/s^2 * t^2
To solve for t, we can rearrange the equation:
t^2 = (2 * 76.2 meters) / 9.8 m/s^2
t^2 ≈ 15.5918
Taking the square root of both sides:
t ≈ √15.5918
t ≈ 3.949 seconds
Therefore, it will take approximately 3.949 seconds for the projectile to fall freely from a height of 250 feet.
To know more about height refer here
https://brainly.com/question/29131380#
#SPJ11
air at 20 c and moving at 15 m/s is warmed by an isothermal heated plate at 110 c, 0.5 m in length and 0.5 m in width. calculate average heat transfer coefficient and total rate of heat transfer
The correct answer is 51.94 W
To calculate the average heat transfer coefficient and total rate of heat transfer in this scenario, we can use the concept of forced convection and the Newton's law of cooling.
The average heat transfer coefficient (h) can be calculated using the equation:
h = q / (A * ΔT)
Where:
q is the total rate of heat transfer,
A is the surface area of contact, and
ΔT is the temperature difference between the heated plate and the air.
The total rate of heat transfer (q) can be calculated using the equation:
q = h * A * ΔT
Given:
Temperature difference (ΔT) = (110°C - 20°C) = 90°C
Air velocity (v) = 15 m/s
Length (L) = 0.5 m
Width (W) = 0.5 m
Surface area of contact (A) = L * W = 0.5 m * 0.5 m = 0.25 m²
To calculate the average heat transfer coefficient, we need to determine the Reynolds number (Re) and the Nusselt number (Nu) for forced convection.
The Reynolds number (Re) can be calculated using the equation:
Re = (ρ * v * L) / μ
Where:
ρ is the density of air,
v is the velocity of air,
L is the characteristic length, and
μ is the dynamic viscosity of air.
The Nusselt number (Nu) can be calculated using the relation for forced convection over a flat plate:
Nu = 0.664 * Re^(1/2) * Pr^(1/3)
Where:
Pr is the Prandtl number for air.
Let's calculate the Reynolds number (Re) and the Nusselt number (Nu) first:
Density of air (ρ) at 20°C can be approximated as 1.204 kg/m³.
Dynamic viscosity of air (μ) at 20°C can be approximated as 1.983 x 10^(-5) kg/(m·s).
Prandtl number (Pr) for air at 20°C is approximately 0.711.
Re = (1.204 kg/m³ * 15 m/s * 0.5 m) / (1.983 x 10^(-5) kg/(m·s)) ≈ 454,502
Nu = 0.664 * (454,502)^(1/2) * (0.711)^(1/3) ≈ 87.76
Now, we can calculate the average heat transfer coefficient (h):
h = q / (A * ΔT)
h = q / (0.25 m² * 90°C)
h = q / 22.5 m²·°C
And, using the Nusselt number (Nu) for forced convection, we can write:
h = (Nu * k) / L
Where:
k is the thermal conductivity of air.
The thermal conductivity of air at 20°C is approximately 0.0262 W/(m·°C).
Using the equation above, we can solve for h:
h = (87.76 * 0.0262 W/(m·°C)) / 0.5 m
h ≈ 4.575 W/(m²·°C)
Now that we have calculated the average heat transfer coefficient (h), we can find the total rate of heat transfer (q) using the equation:
q = h * A * ΔT
q = (4.575 W/(m²·°C)) * 0.25 m² * 90°C
q ≈ 51.94 W
To know more about heat refer here
https://brainly.com/question/13860901#
#SPJ11
A metallic sphere has 100 LC charge. If the sphere contains 2 x 1016 electrons present on the sphere will be protons, the total number of 206.2 x 1016 206.2 x O 1012 206.2 x 1014 206.2 x 1010 O
The total number of protons present on the metallic sphere is approximately 2.0625 x 10^22.
To determine the number of protons present on the metallic sphere, we can use the fact that the charge of an electron is[tex]-1.6 * 10^{(-19)[/tex] coulombs, and the charge of a proton is [tex]+1.6 * 10^{(-19)[/tex]coulombs.
Given:
Charge on the sphere = 100 LC (coulombs)
Number of electrons on the sphere =[tex]2 * 10^{16[/tex]
The charge on the sphere is the sum of the charges carried by the electrons and protons:
Charge on the sphere = (Charge of electrons) + (Charge of protons)
Considering that the charge of an electron is negative and the charge of a proton is positive, we can write:
100 LC = (Charge of electrons) + (Number of protons) * (Charge of a proton)
Substituting the values:
100 LC = (-1.6 x [tex]10^{(-19)[/tex] C) * (2 x [tex]10^{16[/tex]) + (Number of protons) * (1.6 x [tex]10^{(-19)[/tex]C)
Simplifying:
100 LC = -3.2 x [tex]10^{(-3)[/tex] C + (Number of protons) * (1.6 x [tex]10^{(-19)[/tex] C)
Now, let's solve for the number of protons (P):
(Number of protons) * (1.6 x [tex]10^{(-19)[/tex] C) = 100 LC + 3.2 x [tex]10^{(-3)[/tex] C
Number of protons = (100 LC + 3.2 x [tex]10^{(-3)[/tex]C) / (1.6 x [tex]10^{(-19)[/tex] C)
Number of protons ≈ (100 LC) / (1.6 x [tex]10^{(-19)[/tex] C) + (3.2 x [tex]10^{(-3)[/tex] C) / (1.6 x [tex]10^{(-19)[/tex] C)
Number of protons ≈ 6.25 x [tex]10^{20[/tex]+ 2 x [tex]10^{22[/tex]
Number of protons ≈ 2.0625 x [tex]10^{22[/tex]
To know more about protons refer here
https://brainly.com/question/12535409#
#SPJ11
An object of mass M suspended by a spring vibrates with a period T . If this object is replaced by one of mass 16M , the new object vibrates with a period
When an object of mass M is suspended by a spring and vibrates with a time period T, replacing it with an object of mass 16M will result in the new object vibrating with a period T/4.
The period of vibration of an object attached to a spring depends on the mass of the object and the stiffness of the spring. According to Hooke's Law, the period of vibration is inversely proportional to the square root of the mass. Mathematically, T is proportional to the square root of M.
When the object's mass is replaced with 16M, the new period T' can be calculated using the same relationship. Since the mass is now 16 times larger, the new period will be proportional to the square root of 16M.
The square root of 16M is 4 times the square root of M. Therefore, the new period T' is equal to T divided by 4. In other words, replacing the object with a mass 16 times larger results in the period of vibration becoming one-fourth of the original period.
To learn more about time period click here: brainly.com/question/31824035
#SPJ11