A laser pulse of duration 25 ms has a total energy of 1.4 J. The wavelength of this radiation is
567 nm. How many photons are emitted in one pulse? Let 1 eV = 1.60 x 10-19 J, the mass of
an electron m=9.11 10-31
kg, the speed of light c= 3.00 x 108 m/s, and Planck's constant h
= 4.136 10-15 eV .s.
Answer:
n = 4 x 10¹⁸ photons
Explanation:
First, we will calculate the energy of one photon in the radiation:
[tex]E = \frac{hc}{\lambda}\\\\[/tex]
where,
E = Energy of one photon = ?
h = Plank's Constant = 6.625 x 10⁻³⁴ J.s
c = speed of light = 3 x 10⁸ m/s
λ = wavelength of radiation = 567 nm = 5.67 x 10⁻⁷ m
Therefore,
[tex]E = \frac{(6.625\ x\ 10^{-34}\ J.s)(3\ x\ 10^8\ m/s)}{5.67\ x\ 10^{-7}\ m}[/tex]
E = 3.505 x 10⁻¹⁹ J
Now, the number of photons to make up the total energy can be calculated as follows:
[tex]Total\ Energy = nE\\1.4\ J = n(3.505\ x\ 10^{-19}\ J)\\n = \frac{1.4\ J}{3.505\ x\ 10^{-19}\ J}\\[/tex]
n = 4 x 10¹⁸ photons
A person starts running from 2 m/s to 6 m/s in 2 seconds.
Calculate the person's acceleration.
Var
Variables:
Solve:
F
Formula:
Answer:
2 m/s²
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 2 m/s
Final velocity (v) = 6 m/s
Time (t) = 2 s
Acceleration (a) =?
The acceleration of the person can be obtained as follow:
v = u + at
6 = 2 + (a×2)
6 = 2 + 2a
Collect like terms
6 – 2 = 2a
4 = 2a
Divide both side by 2
a = 4 / 2
a = 2 m/s²
Therefore, the acceleration of the person is 2 m/s²
A type of organism that makes its own food. __________
The highest taxonomic classification of organisms.__________
The process through which organisms make new organisms of the same kind. _______
The taxonomic classification below domains._________
A type of organism that is made of more than one cell and is more specialized and eukaryotic.__________
A characteristic passed from female and male parents to their offspring.________
FILL IN THE BLANKS PLEASEEE WILL GIVE BRAINLIEST AND 50 POINTS
Answer:
1. An autotroph
2. Domain
3. Reproduction
4. Kingdom
5. Multicellular Organism
6. Genetic trait
Explanation: Took Bio honors 1 & 2
In regions of the cardiovascular system where there is steady laminar blood flow, the shear stress on cells lining the walls of the blood vessels is about 20 N / M2. If the shear strain is about 0.008, estimate the shear modulus for the affected cells.
Answer:
Shear Modulus = 2500 Pa = 2.5 KPa
Explanation:
The shear modulus is defined as the ratio between the shear stress and the shear strain. Hence, the shear modulus, in this case, can be calculated by the use of the following formula:
[tex]Shear\ Modulus = \frac{Shear\ Stress}{Shear\ Strain}\\[/tex]
we have,
shear stress = 20 N/m²
shear strain = 0.008
Therefore,
[tex]Shear\ Modulus = \frac{20\ N/m^2}{0.008}\\\\[/tex]
Shear Modulus = 2500 Pa = 2.5 KPa
Geothermal energy is an alternative energy source, although it is not resourceful enough to replace more than a minor amount of the Earth’s energy needs. Why is this?
Answer: However, it is not resourceful enough to replace more than a minor amount of the Earth's energy needs. Drilling through the Earth to reach areas hot enough to create steam is possible, but very expensive and difficult. .
Explanation:
What is the momentum of a 4 kg object moving west at 4 m/s?*
O 12 kg*m/s (east)
O 1.33 kg*m/s (west)
O 16 kg*m/s (east)
16 kg*m/s (west)
Answer:
16kg*m/s west
Explanation:
P=M*V
Momentum= Mass time velocity, plug it into the formula,
M is 4 and V is 4, 4*4=16, and since the object is moving west its going to be west.
basically saying in simpler terms,
16=4*4
a bullet of mass 120g is fired horizontally into a fixed wooden block with a speed of 20m\s. The bullet is brought to rest in a wooden block in 0.1secs by a constant resistance
calculate the;(I) magnitude of the resistance
(ii) distance moved by the bullet in the wood
Answer:
1) F = 24 N
2) Distance = 1 m
Explanation:
We are given;
Mass; m = 120 g = 0.12 kg
Initial velocity; u = 20 m/s
Final velocity; v = 0 m/s since it came to rest.
Time; t = 0.1 s
We can calculate acceleration from Newton's first equation of motion;
a = (v - u)/t
a = (0 - 20)/0.1
a = -200 m/s²
1) magnitude of the resistance will be;
F = ma
F = 0.12 × (-200)
F = -24 N
Since, we are dealing with the magnitude, we will take the absolute value. Thus, F = 24 N
2) To find the distance moved by the bullet, we know that;
Distance = Average speed × time
Thus;
Distance = ((v + u)/2) × t
Distance = ((0 + 20)/2) × 0.1
Distance = 1 m
Spatial awareness is knowing where you are in relationship to teammates, opponents, and the field of play.
O. Truth
O. False
Answer:
A.) True
Explanation:
"Spatial awareness refers to being aware of your surroundings and your position relative to them. "
-healthline.com
It's essentially knowing where you are in the field, and who/what's around you.
A microphone is attached to a spring that is suspended from the ceiling, as the drawing indicates. Directly below on the floor is a stationary 375-Hz source of sound. The microphone vibrates up and down in simple harmonic motion with a period of 1.80 s. The difference between the maximum and minimum sound frequencies detected by the microphone is 2.75 Hz. Ignoring any reflections of sound in the room and using 343 m/s for the speed of sound, determine the amplitude (in m) of the simple harmonic motion.
Answer:
[tex]0.361\ \text{m}[/tex]
Explanation:
[tex]f_s[/tex] = Frequency of source = 375 Hz
[tex]\Delta f[/tex] = Difference between the maximum and minimum sound frequencies = 2.75 Hz
v = Speed of sound in air = 343 m/s
T = Time period = 1.8 s
[tex]v_m[/tex] = Maximum speed of the microphone
We have the relation
[tex]\Delta f=2f_s\dfrac{v_m}{v}\\\Rightarrow v_m=\dfrac{\Delta fv}{2f_s}\\\Rightarrow v_m=\dfrac{2.75\times 343}{2\times 375}\\\Rightarrow v_m=1.26\ \text{m/s}[/tex]
Amplitude is given by
[tex]A=\dfrac{v_mT}{2\pi}\\\Rightarrow A=\dfrac{1.26\times 1.8}{2\pi}\\\Rightarrow A=0.361\ \text{m}[/tex]
The amplitude of the simple harmonic motion is [tex]0.361\ \text{m}[/tex].
Two objects collide. One of the objects deforms upon collision. What type of collision is this?
Select one:
A: Elastic collision, because energy is used to defom the object.
B: Inelastic collision, because energy is conserved.
C: Inelastic collision, because kinetic energy was lost when the object was deformed.
D: Elastic collision, because momentum is conserved.
Answer:
D Elastic collision because momentum is conserved
Explanation:
this is the answer may i be marked brainliest?
GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 25pts-
Answer:
A, and D are the answers
Explanation:
The pulley. It is located where the bicycle chain and gears are. The chain is wrapped around the pulley which turns and causes the wheel to turn on its axle.
A system releases 150 kJ of heat while 10 kJ of work is done on the system by
the surroundings. Calculate the change in internal energy (in kJ).
Answer:
160J OR 140J
Explanation:
Depends on teacher which formula your teacher uses.
U=Q+W OR U=Q-W
Method 1:
U=150+10J=160
U=150-10=140J
discuss impact of Newton's second law on roads
Answer:
The second law: When a force is applied to a car, the change in motion is proportional to the force divided by the mass of the car. This law is expressed by the famous equation F = ma, where F is a force, m is the mass of the car, and a is the acceleration, or change in motion, of the car
What is a mechanical advantage?
Answer:
B
Explanation:
A Mechanical Advantage is when you use a piece of machinery to help you do work, and it is an easy advantage.
A plumber is going to put two pipes in a wall, one in front and one in back. The pipes will be touching once they are installed. Both pipes are the same size and have the same number of molecules. The diagram above shows the pipes now, before they have touched. Use the information in the diagram to answer the question.
How does the temperature of the front pipe compare with the temperature of the back pipe before the pipes touch? What will happen after the pipes have been touching for a while?
Answer:
They become the same exact tempature
Explanation:
Since they got connected it should be the same.
the temperature of the front pipe compare with the temperature of the back pipe before the pipes touch by using same temperature.
what is temperature ?Temperature is the measure of hotness or coldness expressed in terms of any of several arbitrary scales and it indicate the direction in which heat energy will spontaneously flow from a hotter body to a colder body.
It is not the equivalent of the energy of a thermodynamic system like burning match is at a much higher temperature than an iceberg whereas the total heat energy contained in an iceberg.
Temperature which is similar to pressure or density known as intensive property that is independent of the quantity of matter is considered as distinguished from extensive properties, such as mass or volume.
For more details regarding temperature, visit
https://brainly.com/question/23411503
#SPJ2
Given equal time periods, which statement about radioactive waste is correct?
A. Radioactive decay and nuclear fission always generate the same amount of waste.
B. Nuclear fusion generates less radioactive waste than radioactive decay does.
C. Nuclear fusion generates less radioactive waste than nuclear fission does.
D. Nuclear fission generates less radioactive waste than radioactive decay does.
Does anyone know 19 and 20 ??
In this system, ___________________ energy from the sunlight causes the solar panel to create ___________________ energy which flows into the incandescent light bulb. In the light bulb, the ___________________ energy is transformed into two different types of energy: ___________________ energy and ___________________ energy.
Answer:
solar, heat,heat, light
particles q1, q2, and q3 are in a straight line. particles q1 = -5.00 x 10^-6 C, q2 = -5.00 x 10^-6 C. .5 between each what is the net force on q3
Answer:
1.12
Explanation:
Acellus
Answer: +1.12
Explanation:
This answer works for Acellus! :)
An incident ray that passes through the vertex of a convex lens:
F
F
c
A. refracts inward, at an angle equal to the angle of incidence,
B. continues in a straight line without refracting.
C. refracts parallel to the axis of the lens,
D. refracts outward, at an angle equal to the angle of incidence.
Two charges are separated by a distance r. The distance between the charges is tripled to 3r. If the original force between the charges was 45N what is the new force between the charges A.5N B.15N C.75N D.135N
Answer:
5N
Explanation:
The formula formula for calculating the force between charges is expressed as;
F = kq1q2/r²
If two charges are separated by a distance r and a force between them is 45N, then;
45 = kq1q2/r² ....1
If the distance between the charges is tripled to 3r, then;
F = kq1q2/(3r)²
F = kq1q2/9r² ... 2
Divide both expressions
45/F = (kq1q2/r²)/(kq1q2/9r²)
45/F = kq1q2/r² * 9r²/kq1q2
45/F = 9
9F = 45
F = 45/9
F = 5N
Hence the new force between them will be 5N
Suppose you are working on green house, which light you would
use for their growth?
Answer:
Fluorescent lighting is usually used.
Explanation:
Answer:
HPS lighting or LED light
Explanation:
HPS light is well known choice with a proven track record for growers. While you can also use LED lights as an alternative to incandescent or HPS fixtures for day length extension.
A vertical piston-cylinder device initially contains 0.1 m^3 of air at 400 K and 100 kPa. At this initial condition, the piston is resting on a stop. The piston-cylinder device is connected to a supply line with air at 400 K and a pressure of 500 kPa. The valve between the supply line and the piston-cylinder device is opened and is left open until the pressure in the piston-cylinder device reaches 500 kPa. The piston is observed to start moving when the pressure in the cylinder is 200 kPa and the piston continues to rise until it reaches a second stop. At the second stop, the piston-cylinder volume is 0.2 m^3 . The final temperature and pressure in the piston-cylinder device are 440 K and 500 kPa, respectively. Determine the heat transfer to or from the piston-cylinder device for the filling process Determine heat transfer (kJ) during the entire process.
Answer:
[tex]Q=-38.15kJ[/tex]
Explanation:
From the question we are told that
Piston-cylinder initial Volume of air [tex]v_1=0.1 m^3[/tex]
Piston-cylinder initial temperature [tex]T_1=400k[/tex]
Piston-cylinder initial pressure [tex]P_1= 100kpa[/tex]
Supply line temperature[tex]T_s=400k[/tex]
Supply line pressure [tex]P_s= 500kpa[/tex]
Valve final pressure [tex]P_v=500kpa[/tex]
Piston movement pressure [tex]P_m=200kpa[/tex]
Piston-cylinder final Volume of air[tex]v_2=0.2 m^3[/tex]
Piston-cylinder final temperature [tex]T_2=440k[/tex]
Piston-cylinder final pressure [tex]P_2= 500kpa[/tex]
Generally the equation for conservation of mass is mathematically given by
[tex]Q=m_2 \mu_2-m_1 \mu_1 +W-(m_2-m_1)h[/tex]
where
Initial moment
[tex]m_1=\frac{p_1 V_1}{RT_1}[/tex]
[tex]m_1=\frac{100*0.1}{0.287*400}[/tex]
[tex]m_1=8.7*10^-^2kg[/tex]
Final moment
[tex]m_2=\frac{p_2 V_2}{RT_2}[/tex]
[tex]m_1=\frac{500*0.3}{0.287*440}[/tex]
[tex]m_1=79*10^{-2}kg[/tex]
Work done by Piston movement pressure
[tex]W=Pd[/tex]
[tex]W=P(v_2-v_1)[/tex]
[tex]W=200(0.2-0.1))[/tex]
[tex]W=20000J[/tex]
Heat function
[tex]h=cT_1[/tex]
[tex]h=1.005(400)[/tex]
[tex]h=402[/tex]
Therefore
[tex]Q=(0.792*0.718(440)-0.0871*0.718(400)+20-(0.792-0.087)*402))[/tex]
[tex]Q=-38.15kJ[/tex]
It is given mathematically that the system lost or dissipated Heat of
[tex]Q=-38.15kJ[/tex]
Paper clips, nails, and scissors all act as which of the following?
electromagnets
ion magnets
temporary magnets
I think its ion magnets correct me if I'm wrong
It takes 5000 J of work to lift a crate to a height of 5 m in 10 s of time.. Calculate the power.
Answer:
P = 500 W
Explanation:
Given that,
Work done to lift a crate to a height of 5 m is 5000 J
It takes 10 s
We need to find the power of the crate. We know that power is the rate of doing work. Mathematically, it can be given by :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{5000}{10}\\\\P=500\ W[/tex]
So, the power of the crate is equal to 500 W.
An elephant's legs have a reasonably uniform cross section from top to bottom, and they are quite long, pivoting high on the animal's body. When an elephant moves at a walk, it uses very little energy to bring its legs forward, simply allowing them to swing like pendulums. For fluid walking motion, this time should be half the time for a complete stride; as soon as the right leg finishes swinging forward, the elephant plants the right foot and begins swinging the left leg forward.
Answer:
is this the full question?
Explanation:
During sublimation and deposition, this state of matter is skipped:
A) Solid
B) gas
C) liquid
Explain how energy that comes from the outside of the Earth system drives the flow of water on surface currents.
Answer:
The ocean and atmosphere are connected. They work together to move heat and fresh water across the globe. Wind-driven and ocean-current circulations move warm water toward the poles and colder water toward the equator. ... The majority of the thermal energy at the Earth's surface is stored in the ocean.
Explanation:
The ocean and atmosphere are connected. They work together to move heat and fresh water across the globe. Wind-driven and ocean-current circulations move warm water toward the poles and colder water toward the equator. ... The majority of the thermal energy at the Earth's surface is stored in the ocean.
please, pretty please help me!
Answer:
umm
Explanation:
1223565 578633 =334675
A researcher is trying to identify whether household substances are basic. Which approach would BEST help the researcher
investigate whether substances are basic?
A. Test each substance with red litmus paper.
B. Test each substance with blue litmus paper.
C. Observe each substance and record its color.
D. Mix each substance with a weak base and record the results.
Answer:
a
Explanation:
because red litmus paper turn blues under base or alkaline condition