The planets how and block are near each other in the Dorgon system. the Dorgons have very advanced technology, and a Dorgon scientist wants to increase the pull of gravity between the two planets. Which proposals would the scientist make to accomplish this goal? check all that apply.

Answer:

(a) f

(b) r

(c) s

Explanation:

There are two forces on the sphere: weight and buoyancy.

Sum of forces in the y direction:

∑F = ma

B − mg = 0

B = mg

Buoyancy is equal to the weight of the displaced fluid, or ρVg, where ρ is the density of the fluid and V is the displaced volume.

ρVg = mg

ρV = m

V = m/ρ

(a) The mass decreases, so the displaced volume decreases.

(b) The sphere's density is constant and its radius increases, which means its mass increases, so the displaced volume increases.

(c) The mass stays the same, so the displaced volume is the same.

Answer:

The magnitude of the magnetic field is 8.333 x 10⁻⁷ T

Explanation:

Given;

charge on the lightening bolt, C = 15.0 C

time the charge passes by, t = 1.5 x 10⁻³ s

Current, I is calculated as;

I = q / t

I = 15 / 1.5 x 10⁻³

I = 10,000 A

Magnetic field at a distance from the bolt is calculated as;

[tex]B = \frac{\mu_o I}{2\pi r}[/tex]

where;

μ₀ is permeability of free space = 4π x 10⁻⁷

I is the current in the bolt

r is the distance of the magnetic field from the bolt

[tex]B = \frac{\mu_o I}{2\pi r} \\\\B = \frac{4\pi *10^{-7} 10000}{2\pi *24} \\\\B = 8.333 *10^{-5} \ T[/tex]

Therefore, the magnitude of the magnetic field is 8.333 x 10⁻⁷ T

Answer:

Anti-Particle

Answer:

The  angular acceleration is [tex]\alpha = 0.4418 \ rad /s^2[/tex]

Explanation:

From the question we are told that

      The  angular speed is [tex]w_f = 45 \ rev / minutes = \frac{45 * 2 * \pi }{60 }= 4.713 \ rad/s[/tex]

       The  angular displacement is  [tex]\theta =4 \ rev = 4 * 2 * \pi = 25.14 \ rad[/tex]

From the first equation of motion we can define the movement of the record as

      [tex]w_f ^2 = w_o ^2 + 2 * \alpha * \theta[/tex]

Given that the record started from rest [tex]w_o = 0[/tex]

So

       [tex]4.713^2 = 2 * \alpha * 25.14[/tex]

        [tex]\alpha = 0.4418 \ rad /s^2[/tex]

The velocity and force are required.

The speed of the racket is 8.7 m/s

The required force is 471.43 N.

[tex]m_1[/tex] = Mass of racket = 1000 g

[tex]m_2[/tex] = Mass of ball = 60 g

[tex]u_1[/tex] = Initial velocity of racket = 12 m/s

[tex]u_2[/tex] = Initial velocity of ball = -15 m/s

[tex]v_1[/tex] = Final velocity of racket

[tex]v_2[/tex] = Final velocity of ball = 40 m/s

[tex]\Delta t[/tex] = Time = 7 ms

The equation of the momentum will be

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\Rightarrow v_1=\dfrac{m_1u_1+m_2u_2-m_2v_2}{m_1}\\\Rightarrow v_1=\dfrac{1\times 12+0.06\times (-15)-0.06\times 40}{1}\\\Rightarrow v_1=8.7\ \text{m/s}[/tex]

Force is given by

[tex]F=m_2\dfrac{v_2-u_2}{\Delta t}\\\Rightarrow F=0.06\times \dfrac{40-(-15)}{7\times 10^{-3}}\\\Rightarrow F=471.43\ \text{N}[/tex]

Learn more:

https://brainly.com/question/19689434?referrer=searchResults

Answer:

The answer is 40 N for APX

Explanation:

Answer:

The magnitude of the net field located at the center of the square is the same in every of arrangement of the charges.

Answer:

D &B

Explanation:

Using Fleming right hand rule that States that if the fore-finger, middle finger and the thumb of left hand are stretched mutually perpendicular to each other, such that fore-finger points in the direction of magnetic field, the middle finger points in the direction of the motion of positive charge, then the thumb points to the direction of the force

A wedge of glass of refractive index 1.64 has a silver coating on the bottom, as shown in the image attached below.

Determine the smallest distance x to a position where 450-nm light reflected from the top surface of the glass interferes constructively with light reflected from the silver coating on the bottom. The light changes phase when reflected at the silver coating.

Answer:

the smallest distance x  = 2.74 × 10⁻³ m or 2.74 mm

Explanation:

From the given information:

The net phase change is zero because both the light ray reflecting from the air-glass surface and silver plate undergo a phase change of [tex]\dfrac{\lambda}{2}[/tex] , as such the condition for the  constructive interference is:

nΔy = mλ

where;

n = refractive index

Δy = path length (inside the glass)

So, from the diagram;

[tex]\dfrac{y}{x}=\dfrac{10^{-5} \ m}{0.2 \ m}[/tex]

[tex]\dfrac{y}{x} = 5 \times 10^{-5}[/tex]

[tex]y = 5 \times 10^{-5} x[/tex]

Now;

Δy can now be = 2 ( 5 × 10⁻⁵ [tex]x[/tex])

Δy =1 ×  10⁻⁴[tex]x[/tex]

From nΔy = mλ

n( 1 ×  10⁻⁴[tex]x[/tex] ) = mλ

[tex]x = \dfrac{m \lambda}{n \times 1 \times 10^{-4} }[/tex]

when the thickness is minimum then m = 1

Thus;

[tex]x = \dfrac{1 \times 450 \times 10^{-9} \ m}{1.64 \times 1 \times 10^{-4} }[/tex]

x =  0.00274 m

x = 2.74 × 10⁻³ m or 2.74 mm

Answer: B. The surface of the coating is rough, so light that shines on it gets scattered in many directions.

Explanation: On Edge!!!!!!!!!!!!!!!!!!!!

Answer:

The  total energy is  [tex]T = 169.02 \ J[/tex]

Explanation:

From the question we are told that

    The  Poynting vector (energy flux ) is  [tex]k = 0.939 \ W/m^2[/tex]

    The length of the rectangle is  [tex]l = 1.5 \ m[/tex]

    The  width of the rectangle is  [tex]w = 2.0 \ m[/tex]

    The time taken is [tex]t = 1 \ minute = 60 \ s[/tex]

The total electromagnetic energy falls on the area is mathematically represented as

      [tex]T = k * A * t[/tex]

Where A  is the area of the rectangle which is mathematically represented as

           [tex]A= l * w[/tex]

 substituting values

         [tex]A= 2 * 1.5[/tex]

        [tex]A= 3 \ m^2[/tex]

substituting values

        [tex]T = 0.939 * 3 * 60[/tex]

        [tex]T = 169.02 \ J[/tex]

Answer:

The  velocity is [tex]v = 37 .46 \ m/s[/tex]

Explanation:

From the question we are told that

    The start distance above the ground is  [tex]h = 71.6 \ m[/tex]

Generally according to the  law of energy conservation we have that

     [tex]PE_{top} = KE_{bottom }[/tex]

Where [tex]PE_{top}[/tex] is potential energy at the top which is mathematically represented as

      [tex]PE_{top} = m * g * h[/tex]

And  [tex]KE_{bottom }[/tex] is the kinetic energy at the bottom which is mathematically represented as

     [tex]KE_{bottom } = \frac{1}{2} * m * v^2[/tex]

Therefore  

       [tex]m * g * h = \frac{1}{2} * m * v^ 2[/tex]

=>    [tex]v = \sqrt{2 * g * h }[/tex]

substituting value

     [tex]v = \sqrt{2 * 9.8 * 71.6 }[/tex]

     [tex]v = 37 .46 \ m/s[/tex]

Answer:

Pencil is to pen

Step by step explanation:

They are similar items, as they are both tools, but are different as to how they function.

Answer:

Explanation:

The double slit interference phonemene is described for the case of constructive interference

          d sin θ= m λ                   (1)

let's use trigonometry to find the sinus

        tan θ = y / L

in general in interference phenomena the angles are small

       tan θ = sin θ / cos θ = sin θ

The double slit interference phonemene is described for the case of constructive interference

          d sin θ = m lam                    (1)

let's use trigonometry to find the sinus

        tan θ = y / L

in general in interference phenomena the angles are small

       tan θ = sin θ / cos θ = sin θ

we substitute

      sin θ = y / L

we substitute in equation 1

         d y / L = m λ

         λ = dy / L m

let's reduce the magnitudes to the SI system

  d = 0.44 mm = 0.44 10⁻³ m

  y = 5.5 mm = 5.5 10⁻³ m

  L = 4.2m

  m = 1

let's calculate

        λ = 0.44  10⁻³ 5.5 10⁻³ / (4.2 1)

        λ = 5.76190 10-7 m

let's reduce to num

  lam = 5.56190 10-7 m (109 nm / 1m)

  lam = 556,190 nmtea

we substitute

      without tea = y / L

we substitute in equation 1

         d y / L = m lam

         lam = dy / L m

let's reduce the magnitudes to the SI system

  d = 0.44 me = 0.44 10-3 m

  y = 5.5 mm = 5.5 10-3

  L = 4.2m

  m = 1

let's calculate

        lam = 0.44 10⁻³  5.5 10⁻³ / (4.2 1)

        lam = 5.76190 10⁻⁷ m

let's reduce to num

  lam = 5.56190 10⁻⁷ m (109 nm / 1m)

  lam = 556,190 nm

Answer:

A)   V = -136.36 V , B)  V = 4.85 10³ V , C)  V = 1.62 10⁴ V

Explanation:

To calculate the potential at an external point of the spheres we use Gauss's law that the charge can be considered at the center of the sphere, therefore the potential for an external point is

          V = k ∑ [tex]q_{i} / r_{i}[/tex]

where [tex]q_{i}[/tex] and [tex]r_{i}[/tex] are the loads and the point distances.

A) We apply this equation to our case

          V = k (q₁ / r₁ + q₂ / r₂)

They ask us for the potential at the midpoint of separation

         r = 3.30 / 2 = 1.65 m

this distance is much greater than the radius of the spheres

let's calculate

         V = 9 10⁹ (1.1 10⁻⁸ / 1.65  + (-3.6 10⁻⁸) / 1.65)

         V = 9 10¹ / 1.65 (1.10 - 3.60)

         V = -136.36 V

B) The potential at the surface sphere A

r₂ is the distance of sphere B above the surface of sphere A

              r₂ = 3.30 -0.02 = 3.28 m

              r₁ = 0.02 m

we calculate

             V = 9 10⁹ (1.1 10⁻⁸ / 0.02  - 3.6 10⁻⁸ / 3.28)

             V = 9 10¹ (55 - 1,098)

             V = 4.85 10³ V

C) The potential on the surface of sphere B

      r₂ = 0.02 m

      r₁ = 3.3 -0.02 = 3.28 m

      V = 9 10⁹ (1.10 10⁻⁸ / 3.28  - 3.6 10⁻⁸ / 0.02)

       V = 9 10¹ (0.335 - 180)

       V = 1.62 10⁴ V

Answer:

Electric field strengh is a measure of the strength of an electric field at a given point in space, equal to the field would induce on a unit electric charge at that point.

Electric field strength is also known as Electric Field Intensity .

Explanation:

Electric Field is also defined as force per charge. The unit will be force unit divided by charge unit. In this case, it will be Newton/Coulomb or N/C.

Please mark me as the brainliest!!!

Thanks!!!

Answer:

Explanation:

E= −L ΔI / Δt.

L = E Δt / ΔI

Hence the unit of inductance may be V s A⁻¹

or volt s per ampere .

In the given case

change in current ΔI = - 2.5 A

change in time = .015 s

L = .56 H

E = − L ΔI / Δt.

= .56 x 2.5 / .015

= 93.33 V .

Answer:

The longer the cord, the lower the illumination

Explanation:

The illumination provided by the light bulb will be reduced as the length of the extension cord increases. This is because the resistance provided by the wire increases with its length.

Long wires have more electrical resistance than shorter ones.

Let us consider this formula:

Resistance =[tex]\frac{\rho L}{A}[/tex]

From this formula, we can see that as the length increases, the resistance to current flow offered by the wire increases also provided the resistivity and cross-sectional area of the wire remain constant. As a result of this, the illumination will drop.

Answer:

a) before immersion

C = εA/d = (8.85e-12)(25e-4)/(1.31e-2) = 1.68e-12 F

q = CV = (1.68e-12)(255) = 4.28e-10 C

b) after immersion

q = 4.28e-10 C

Because the capacitor was disconnected before it was immersed, the charge remains the same.

c)*at 20° C

C = κεA/d = (80.4*)(8.85e-12)(25e-4)/(1.31e-2) = 5.62e-10 F

V = q/C = 4.28e-10 C/5.62e-10 C = 0.76 V

e)

U(i) = (1/2)CV^2 = (1/2)(1.68e-12)(255)^2 = 5.46e-8 J

U(f) = (1/2)(5.62e-10)(0.76)^2 = 1.62e-10 J

ΔU = 1.62e-10 J - 5.46e-8 J = -3.84e-8 J

Answer:

Let [tex]x(t)[/tex] denote the position (in meters, with respect to the equilibrium position of the spring) of this mass at time [tex]t[/tex] (in seconds.) Note that this question did not specify the direction of this motion. Hence, assume that the gravity on this mass can be ignored.

a. [tex]\displaystyle x(t) = -\frac{9}{7}\, e^{-2 t} + \frac{2}{7}\, e^{-9 t}[/tex].

b. [tex]\displaystyle x(t) = \frac{2}{7}\, e^{-2 t} - \frac{9}{7}\, e^{-9 t}[/tex].

Explanation:

Let [tex]x[/tex] denote the position of this mass (in meters, with respect to the equilibrium position of the spring) at time [tex]t[/tex] (in seconds.) Let [tex]x^\prime[/tex] and [tex]x^{\prime\prime}[/tex] denote the first and second derivatives of  [tex]x[/tex], respectively (with respect to time [tex]t[/tex].)

Construct an equation using [tex]x[/tex], [tex]x^\prime[/tex], and [tex]x^{\prime\prime}[/tex], with both sides equal the net force on this mass.

The first equation for the net force on this mass can be found with Newton's Second Law of motion. Let [tex]m[/tex] denote the size of this mass. By Newton's Second Law of motion, the net force on this mass would thus be equal to:

[tex]F(\text{net}) = m\, a = m\, x^{\prime\prime}[/tex].

The question described another equation for the net force on this mass. This equation is the sum of two parts:

Assume that there's no other force on this mass. Combine the restoring force and the damping force obtain an expression for the net force on this mass:

[tex]F(\text{net}) = -k\, x - 11\, x^\prime[/tex].

Combine the two equations for the net force on this mass to obtain:

[tex]m\, x^{\prime\prime} = -k\, x - 11\, x^\prime[/tex].

From the question:

Hence, the equation will become:

[tex]x^{\prime\prime} = -18\, x - 11\, x^\prime[/tex].

Rearrange to obtain:

[tex]x^{\prime\prime} + 11\, x^\prime + 18\; x = 0[/tex].

[tex]x^{\prime\prime} + 11\, x^\prime + 18\; x = 0[/tex] fits the pattern of a second-order homogeneous ODE with constant coefficients. Its auxiliary equation is:

[tex]m^2 + 11\, m + 18 = 0[/tex].

The two roots are:

Let [tex]c_1[/tex] and [tex]c_2[/tex] denote two arbitrary real constants. The general solution of a second-order homogeneous ODE with two distinct real roots [tex]m_1[/tex] and [tex]m_2[/tex] is:

[tex]x = c_1\, e^{m_1\cdot t} + c_2\, e^{m_2\cdot t}[/tex].

For this particular ODE, that general solution would be:

[tex]x = c_1\, e^{-2 t} + c_2\, e^{-9 t}[/tex].

Note, that if [tex]x(t) = c_1\, e^{-2 t} + c_2\, e^{-9 t}[/tex] denotes the position of this mass at time [tex]t[/tex], then [tex]x^\prime(t) = -2\,c_1\, e^{-2 t} -9\, c_2\, e^{-9 t}[/tex] would denote the velocity of this mass at time

For section [tex]\rm a.[/tex]:

[tex]\left\lbrace\begin{aligned}& x(0) = -1 \\ &x^\prime(0) = 0\end{aligned}\right. \implies \left\lbrace\begin{aligned} &c_1 + c_2 = -1 \\ &-2\, c_1 - 9\, c_2 = 0\end{aligned}\right. \implies \left\lbrace\begin{aligned} &c_1 = -\frac{9}{7} \\ &c_2 = \frac{2}{7}\end{aligned}\right.[/tex].

Hence, the particular solution for section [tex]\rm a.[/tex] will be:

[tex]\displaystyle x(t) = -\frac{9}{7}\, e^{-2 t} + \frac{2}{7}\, e^{-9 t}[/tex].

Similarly, for section [tex]\rm b.[/tex]:

[tex]\left\lbrace\begin{aligned}& x(0) = -1 \\ &x^\prime(0) = 11\end{aligned}\right. \implies \left\lbrace\begin{aligned} &c_1 + c_2 = -1 \\ &-2\, c_1 - 9\, c_2 = 11\end{aligned}\right. \implies \left\lbrace\begin{aligned} &c_1 = \frac{2}{7} \\ &c_2 = -\frac{9}{7}\end{aligned}\right.[/tex].

Hence, the particular solution for section [tex]\rm b.[/tex] will be:

[tex]\displaystyle x(t) = \frac{2}{7}\, e^{-2 t} - \frac{9}{7}\, e^{-9 t}[/tex].

Answer:

[tex]500\text{N} (490\text{N}) (490.5\text{N})[/tex]

Explanation:

The reaction force is the force that is in the perpendicular direction to the wall.

We have an angle and a hypotenuse, we need to find the adjacent angle - so we can just use cos:

[tex]cos(\theta)=\frac{\text{adj}}{\text{hyp}}\\\text{hyp}*cos(\theta)=\text{adj}\\100*cos(60)=100*0.5=50\text{kg}[/tex]

However, we would like a force and not a mass.

[tex]W=mg\\W=50g\\W=500\text{N} (490\text{N}) (490.5\text{N})[/tex]

Answer 1 if you use g as 10, answer 2 if you're studying mechanics in maths, answer 3 if you're studying mechanics in physics.

Answer:

Option (A)

Explanation:

A 20 kg boy chases the butterfly with a speed of 2 meter per second.

Angle at which he runs is 70° North of West.

Therefore, Horizontal component (Vx) directing towards West will be,

Vx = v(Cos70°)

Vy = v(Sin70°)

Since momentum of a body is defined by,

Momentum = Mass × Velocity

Therefore, Westerly component of the momentum will be,

Momentum = 20 × (v)(Cos70°)

                   = 20 × 2Cos70°

                   = 13.68

                   ≈ 13.7 kg-meter per second

Therefore, Option (A) will be the answer.

Answer:

C. The magnitude of the electron's acceleration inside the field

D. The radius of the circular path the electron travels

Explanation:

The radius of the electron's motion in a uniform magnetic field is given by

[tex]R = \frac{MV}{qB}[/tex]

where;

m is the mass of the electron

q is the charge of the electron

B is the magnitude of the magnetic field

V is speed of the electron

R is the radius of the electron's

Thus, the radius of the of the electron's motion will change since it depends on speed of the electron.

The magnitude of the electron's acceleration inside the field  is given by;

[tex]a_c = \frac{V^2}{R}[/tex]

where;

[tex]a_c[/tex] is centripetal acceleration of electron

Thus, the magnitude of the electron's acceleration inside the field will change since it depends on the electron speed.

The time the electron is in the magnetic field is given by;

[tex]T = \frac{2\pi M}{qB}[/tex]

The time of electron motion will not change

The magnitude of the net force acting on the electron inside the field will not change;

[tex]qVB = \frac{MV^2}{R} \\\\qVB - \frac{MV^2}{R} = 0[/tex]

Therefore, the correct options are "C" and "D"

Answer:

Explanation:

In a single slit experiment, the distance on a screen from the centre point is expressed as y = [tex]\frac{\delta m \lambda d}{a}[/tex] where;

[tex]\delta m[/tex] is the first two diffraction minima = 1

[tex]\lambda[/tex] is light wavelength

d is the distance of diffraction pattern from the screen

a is the width of the slit

Given [tex]\lambda[/tex] = 460-nm = 460*10⁻⁹m

d = 5.0mm = 5*10⁻³m

a = 1.4mm = 1.4*10⁻³m

Substituting this values into the formula above to get width of the central maximum y;

y = 1*460*10⁻⁹ * 5*10⁻³/1.4*10⁻³

y = 2300*10⁻¹²/1.4*10⁻³

y = 1642.86*10⁻⁹

y = 1.643*10⁻⁶m

Converting the final value to cm,

since 100cm = 1m

x = 1.643*10⁻⁶m

x = 1.643*10⁻⁶ * 100

x = 1.643*10⁻⁴cm

Hence, the width of the central maximum in the diffraction pattern on a screen 5.0 mm away is  1.643*10⁻⁴cm

Answer:

Explanation:

Let the velocity of astronaut be u and the velocity of flat sheet of metal plate be v . They will move in opposite direction ,  so their relative velocity

= u + v = 2.3 m /s ( given )

We shall apply conservation of momentum law for the movement of astronaut and metal plate

mu  = M v where m is mass of astronaut , M is mass of metal plate

71 u = 230 x v

71 ( 2.3 - v ) = 230 v

163.3 = 301 v

v = .54 m / s

u = 1.76 m / s

honeycomb will be at rest  because honeycomb surface  is frictionless . Plate will slip over it . Over plate astronaut is walking .

a ) velocity of metal sheet relative to honeycomb will be - 1.76 m /s

b ) velocity of astronaut relative to honeycomb will be + .54 m /s

Here + ve direction is assumed to be the direction of astronaut .  

Answer:

Explanation:

Using equations of motion:

(a)

v=u+at

∴0=19.4−8.57t

∴t=19.4/8.57

=2.3s

B. Using s= ut + 1/2 at²

19.4(2.3)-1/28.57(2.3)²

= 21.92rad

Answer:

The power required by the pump is nearly 230.588 kW

Explanation:

Flow rate of the pump Q = 1 m^3/s

the head flow H = 20 m

specific weight of water γ = 9800 N/m^3

efficiency of the pump η = 85%

First note that specific gravity of water is the product of the density of water and acceleration due to gravity.

γ = ρg

where ρ is density. For water its value is 1000 kg/m^3

g is the acceleration due to gravity = 9.81 m/s^2

The power to lift this water at this rate will be gotten from the equation

P = ρgQH

but ρg = γ

therefore,

P = γQH

imputing values, we'll have

P = 9800 x 1 x 20 = 196000 W

But the centrifugal pump that will be used will only be able to lift this amount of water after the efficiency factor has been considered. The power of pump needed must be greater than this power.

we can say that

196000 W is 85% of the power of the pump power needed, therefore

196000 = 85% of [tex]P_{p}[/tex]

where [tex]P_{p}[/tex] is the power of the pump needed

85% = 0.85

196000 = 0.85[tex]P_{p}[/tex]

[tex]P_{p}[/tex] = 196000/0.85 = 230588.24 W

Pump power = 230.588 kW

Answer: W.D = 1/2mv^2

Explanation:

If an external force or a single force is acting on a body. Just like the first law of thermodynamics, the force acting on the body will cause work done on the system.

Work done = force × distance

And the work done on the body will cause the molecules of the body to experience motion and thereby producing kinetic energy.

The work done will be converted to kinetic energy.

W.D = 1/2mv^2

Answer:

Zack should direct his throw outward and toward the back of the car.

Explanation:

As the car is moving forward, the book will be thrown with a forward component. Therefore, throwing this book backwards at a constant speed would cancel the motion of the car, allowing the book to have a greater chance of ending on the driveway. I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum.

The solution is throw 3.

I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum as the skydivers.

The statement that best applies Newton’s laws of motion to explain the skydiver’s motion is that an upward force balances the downward force of gravity on the skydiver. Newton's 3rd law often applies to skydiving.

When gravity is not acting upon the skydivers they would continue moving in the direction the vehicle they jumped from was moving. If no air resistance takes place, then the skydivers would still accelerating at 9.8 m/s until they hit the ground.

The skydiver after leaving the aircraft will accelerates downwards due to the force of gravity usually as there is no air resistance acting in the upwards direction, and there is a resultant force acting downwards, the skydiver will accelerates towards the ground.

Therefore, I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum as the skydivers.

Learn more about skydiver on:

https://brainly.com/question/29253407

#SPJ6

Answer:

Explanation:

Using the formula for calculating the resistivity of an object to find the diameter.

Resistivity P = RA/L

R is the resistance of the material

A is the cross sectional area

L is the length of the material

Since A = πd²/4

P = R( πd²/4)/L

P = Rπd²/4L ... 1

If the second wire of the same material and length is found to have resistance R/9, the resistivity of the second material will be;

P₂ = (R/9)A₂/L₂

P₂ = (R/9)(πd₂²/4)/L₂

P₂ = (Rπd₂²/36)/L₂

P₂ = (Rπd₂²)/36L₂

Since the length and resistivity are the same;

P = P₂  and L =L₂

Equating 1 and 2;

Rπd²/4L =  (Rπd₂²)/36L₂

Rπd²/4L =  (Rπd₂²)/36L

d² = d₂²/9

d₂² = 9d²

Taking the square root of both sides;

√d₂² = √9d²

d₂ = 3d

Therefore the diameter of the second wire is 3 times that of the initial wire