The planets Hox and Blox are near each other in the Dorgon system. The Dorgons have very advanced technology, and a Dorgon scientist wants to increase the pull of gravity between the two planets.

Which proposals would the scientist make to accomplish this goal? Check all that apply.

Answer:

T

Explanation:

Answer:

By adding baking soda

Explanation:

The best way to reduce the acidity of the spill would be to add some amount of baking soda to the spill and then clean it up with a towel or any other appropriate item.

Baking soda is made up of sodium bicarbonate and has the capacity to react with acid to produce a salt and carbonic acid. The carbonic acid readily decomposes to produce carbon dioxide and water. For example, sodium bicarbonate reacts with hydrochloric acid according to the equation below:

  [tex]NaHCO_3 + HCl --> NaCl + H_2CO3[/tex]

   [tex]H_2CO_3 --> H_2O + CO_2[/tex]

One would expect the addition of a base to the spilled acid to work in a way as to neutralize the acid but bases are also corrosive and only a stoichiometrically balanced quantity would completely neutralize the acid. Thus, the quantity might not easily be determinable and one can end up doing more harm than good.

Hence, the best option is to add baking soda to the spilled acid to reduce its acidity before cleaning it off.

Answer:

Clouds

Explanation:

Because I just got it right

Answer:

1. Volume of box is 314500 cm³.

2. Volume of box 126900 cm³.

3. Mass of sample is 6.309 g.

4. Density of aluminum is 2.7 g/mL.

5. Volume of sample is 31.9 mL.

Explanation:

1. Determination of the volume of the box

Length (L) = 125 cm

Width (W) = 37 cm

Height (H) = 68 cm

Volume (V) =?

V = L × W × H

V = 125 × 37 × 68

V = 314500 cm³

2. Determination of the volume of the box

Length (L) = 423 cm

Width (W) = 12 cm

Height (H) = 25 cm

Volume (V) =?

V = L × W × H

V = 423 × 12 × 25

V = 126900 cm³

3. Determination of the mass of the sample.

Mass of weigh boat = 1.326 g

Mass of weigh boat + Sample = 7.635 g Mass of the sample =?

Mass of Sample = (Mass of weigh boat + Sample) – (Mass of weigh boat)

Mass of Sample = 7.635 – 1.326

Mass of Sample = 6.309 g

4. Determination of the density of aluminum.

Volume of water = 10 mL

Mass of aluminum = 14.74 g

Volume of water + aluminum = 15.46 mL

Density of aluminum =?

Next, we shall determine the volume of aluminum. This can be obtained as follow:

Volume of water = 10 mL

Volume of water + aluminum = 15.46 mL

Volume of aluminum =?

Volume of aluminum = (Volume of water + aluminum) – (Volume of water)

Volume of aluminum = 15.46 – 10

Volume of aluminum = 5.46 mL

Finally, we shall determine the density of aluminum. This can be obtained as follow:

Mass of aluminum = 14.74 g

Volume of aluminum = 5.46 mL

Density of aluminum =?

Density = mass / volume

Density of aluminum = 14.74 / 5.46

Density of aluminum = 2.7 g/mL

5. Determination of the volume of sample.

Mass of sample = 24.5 g

Density of sample = 0.768 g/mL.

Volume of sample =?

Density = mass / volume

0.768 = 24.5 / volume of sample

Cross multiply

0.768 × Volume of sample = 24.5

Divide both side by 0.768

Volume of sample = 24.5 / 0.768

Volume of sample = 31.9 mL.

Na, C, and O so the answer is c. 3

This question is incomplete, the complete question is;

The weight loss of an aluminum alloy corroding in a solution of hydrochloric acid was observed to be 0.250 g/cm² after an 8 h immersion period [13]. What is the corresponding anodic current density in milliamperes per square centimeter, assuming that all the corrosion is due to the following anodic half-cell reaction:

Al → Al³⁺ + 3e⁻

The atomic weight is 58.7 g/mol

Answer:

Current density in milliamperes per square centimeter is 45.81 mA/cm²

Explanation:

Given the data in the question;

we know that Faradays law of electrolysis states that;

amount of substance produced at each electrode is directly proportional to the quantity of charge flowing through the cell.

so

m = ( Q/F) (M/z)

where m is the mass of substance liberated at an electrode( 0.250 g/cm²)

Q is the total electric charge passed through the substance

F is Faradays constant (96,500 C/mol)

M is the molar mass of the substance( 58.7 g/mol )  and Z is the number of electrons transferred(3)

Also

we know that; Q = It

where I is current and t is time( 8hrs × 60 × 60 = 28800 sec )

we substitute  Q = It  into our equation'

we have;

m = ( It/F) (M/z)

m = ItM / Fz

mFz = ItM

I = mFz / tM

so we substitute

I = [0.250 g/cm² × 96,500 C/mol × 3] / [ 28800 × 58.7 g/mol]

I = 72375 /  1690560

I = 0.04581 A/cm²

we know that; 1 ampere = 1000 milliampere

so

I = 0.04581 × 1000

I = 45.81 mA/cm²

Therefore, current density in milliamperes per square centimeter is 45.81 mA/cm²

Answer:

if you ask yahoo answers it will tell you

Explanation:

hope i helped

Answer:

-2856

-792

endothermic, exothermix, exothermic, endothermic

no

Explanation:

Answer:

B.

Explanation:

Functional group can be interconverted into each ther by the means of suitable reagent. Functional group are responsible for the chemical and physical properties of a compound. The given spectral data represents alkene.

A group of atoms forming a component of a molecule that accounts for a particular function or chemical behavior is called a functional group. There are so many functional group in organic chemistry.

The list of functional group are as follow:

Carboxylic group COOH

Alcoholic group OH

Ammine group NH₂

Alkene -c=c-

Ketonic group R-CO_R

Aldehydic group R-CHO

Thiol group R-S-H

Cyanide group -CN

Functional group can be detected by using spectral data. The given spectral data represents alkene.

Therefore the correct option is option B.

To know more about functional group, here:

https://brainly.com/question/14618322

#SPJ5

Answer:

[H⁺] = 3.98×10⁻⁷ M

Explanation:

Given data:

pH of blood = 6.40

Hydrogen ion concentration = ?

Solution:

Formula:

pH = - log[H⁺]

by rearranging this formula,

[H⁺] =  10⁻(pH) or [H⁺] = antilog (-pH)

By putting values,

[H⁺] = 10 ⁻⁶°⁴⁰

[H⁺] = 3.98×10⁻⁷ M

Answer:

Sample A - mixture

Sample B- Mixture

Explanation:

Looking at sample A, we can see that as water was poured over sample A, the sample was separated into its components as the powder disappeared leaving behind a gritty black sand-like material on the surface of the paper. A separation of the mixture has taken place.

In sample B, we can clearly see that it is a mixture because the amount of solid recovered is much less than the total mass of the solid put into the beaker. The sample must have been separated into its components.

Answer:

ΔH°(f) = -110.5 Kj/mole (exothermic)

Explanation:

C + 1/2O₂ => CO

This is asking for the 'Standard Heat of Formation (ΔH°(f)* for carbon monoxide (CO). Values for many compounds can be found in the appendix of most college general chemistry text books. From Ebbing & Gammon, 11th edition, General Chemistry, Appendix C, page 8A.

*Standard Heat of Formation by definition is the heat gained or lost on formation of a substance (compound) from its basic elements in standard state.

The ΔH°(f) values as indicated are found in the appendix of most college chemistry texts. By choosing any compound, one can determine the standard heat of formation equation for the substance of interest. For example, consider Magnesium Carbonate; MgCO₃(s).The basic standard states of each element is found in the Appendix on Thermodynamic Properties for Substances at 25°C & 1 atm. having  ΔH°(f) values = 0.00 Kj/mole. All elements in standard state have a 0 Kj/mol. See appendix and note that under the ΔH°(f) symbol some substances have 0.00 Kj/mol values. The associated element will be in basic standard state,

Standard Heat of Formation Equation for formation of Magnesium Carbonate;

Mg°(s) + C°(gpt)* + 3/2O₂(g) => MgCO₃(s) ; ΔH°(f) = -1111.7 Kj/mole

* gpt => graphite

Answer:

130g

Explanation:

For every mole of a substance, there is a molar mass that coincides with the masses on the periodic table. For one mole of H2O, you would add the molar masses of the two hydrogen atoms and the oxygen atom to get 18.016g. You would then take this molar mass and multiple it by the amount of moles present (7.4) to get 133.3184g

From here, you would round to the significant figures to get 130g

Mass of Oxygen required : 24 grams

Given

3 moles of H

1.5 moles of O

3 moles of H₂O

Required

Mass of O

Solution

Reaction

2H₂ + O₂ ⇒ 2H₂O

Mass of Oxygen for 1.5 moles of O :

= mol x Ar O

= 1.5 moles x 16 g/mol

= 24 grams

Answer:

Decreases

Explanation:

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, each atom in the foil was composed mostly of empty space because most alpha particles directed at the foil.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.

Each atom in the foil was composed mostly of empty space because most alpha particles directed at the foil. This conclusion was the direct result of the gold foil experiment.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ2

Answer:

The options in this question are unclear, the clear options are as follows:

A. C + O2 → CO2

B. Sr + O2 → 2SrO

C. 6H2 + 3O2 → 6H2O

D. H2 + H2 + O2 → H2O + H2O

The answer is B

Explanation:

A balanced chemical equation is that equation in which atoms of each elements in the reaction are of equal number on both sides of the equation (product and reactant). To balance a chemical equation, coefficients are used.

In this question, four chemical equations are given as follows:

- C + O2 → CO2

In this equation, atoms of carbon (1) and oxygen (2) are the same on both sides, hence, it is BALANCED.

- Sr + O2 → 2SrO

In this equation, Sr has 1 atom on the reactant side but 2 atoms on the product side. Hence, it is UNBALANCED. The balanced equation will be: 2Sr + O2 → 2SrO

- 6H2 + 3O2 → 6H2O

In this equation, atoms of hydrogen (12) and oxygen (6) are the same on both sides, hence, it is BALANCED.

- H2 + H2 + O2 → H2O + H2O

In this equation, atoms of hydrogen (4) and oxygen (2) are the same on both sides, hence, it is BALANCED.

Answer:

See explanation

Explanation:

Mass of mixture of  fluorene and benzoic acid = 558 mg

Mass of pure fluorene  after purification = 185 mg of fluorene

Mass of pure  benzoic acid after purification = 144 mg of benzoic acid

Percentage of fluorene int he mixture = 185mg/558mg * 100 = 33.15 %

Percentage of benzoic acid in the mixture = 144mg/558mg * 100 = 25.81 %

Percentage of impurities = 100% - [33.15 + 25.81]

Percentage of impurities = 100 - 58.96

Percentage of impurities = 41.04 %

Answer:

Animals obtain energy from the food they consume , using that energy to maintain body temperature and perform other metabolic functions. Glucose, found in the food animals eat ,is broken down during the process of cellular respiration into energy source called ATP.

Answer:

B) What is the weight of the sample?

Explanation:

The least useful question for the student to identify the sample is "What is the weight of the sample?"

To identify a sample, it is important to know its solubility (homogenous or heterogenous), chemical properties such as melting and boiling point, and whether sample is attracted towards the magnet or not to know the nature of the sample.

Weights is the least useful characteristic of a sample that can help to identify the sample.

Hence, the correct answer is "B) What is the weight of the sample?".

Answer:

Desert

Explanation:

The adaptation shown by the given plants and animals shows that they will adapted to the desert biome.

It is so because, due to high temperature of desert some desert animals like camel have the storage of fat in humps or tails; some animals have large ears such as Jackrabbits, it helps to release body heat and adapt in high temperature; plants have thick water holding tissues to reduce water loss in heat and waxy coating that keeps  the plants cooler and reduce moisture loss.

Hence, the correct answer is "Desert".

Answer:neutral

Explanation:ionic compounds is between a cation and anion so they cancel eachother out

Answer:

D =  42.6 g

Explanation:

Given data:

Mass of oxygen needed = ?

Mass of phosphorus react = 33 g

Solution:

Chemical equation:

4P + 5O₂     →      2P₂O₅

Number of moles of phosphorus:

Number of moles = mass/molar mass

Number of moles = 33 g/ 30.97 g/mol

Number of moles = 1.065 mol

now we will compare the moles of P and oxygen.

                P         :       O₂

                4         :        5

          1.065        :        5/4×1.065 = 1.33mol

Mass of oxygen needed:

Mass = number of moles × molar mass

Mass = 1.33 mol × 32 g/mol

Mass = 42.6 g

Answer:

a

Explanation:

bonding is chemical

A chemicals change includes bond making or breaking. The reaction between two atoms or molecules is their chemical property. Thus bonding with oxygen in air is a common chemical property of elements.

A change in which a substance undergo chemical bond making or breaking and forming new products. Whereas, a physical change does not involve these bond breaking or formation instead a phase change occurs there. Such as conversion of solids to liquids.

All the elements in the periodic table have their characteristic chemical and physical properties. Metallic shining is a physical property of metallic elements and floats in water describes the density of that element which is a physical property.

Similarly, boiling and melting are physical properties and they do not include any bond formation or breaking of the element.

The reaction with oxygen in air called oxidation forming their oxidised product is a chemical change. Thus, option A is correct.

To find more about oxidation, refer the link below:

https://brainly.com/question/376562

#SPJ2

Answer:

A. on the reactant side

Explanation:

A catalyst will appear in the steps of a reaction mechanism, but it will not appear in the overall chemical reaction

Answer:

1.7 g N₂

Explanation:

In order to convert moles of nitrogen gas (N₂) to grams, we'll use its molar mass:

0.060 only has two significant digits, so the reported answer should have two significant digits as well. Meaning the answer is 1.7 g.