Answer:
[tex]0.326\frac{N}{cm^2}[/tex]
Explanation:
Hello.
In this case, considering that 1 atm equals 1.01 kPa, we can compute the pressure in kPa first as shown below:
[tex]2.25atm*\frac{1.01kPa}{1atm} =3.26kPa[/tex]
Now, we convert kPa to Pa, considering 1 kPa equals 1000 Pa:
[tex]3.26kPa*\frac{1000Pa}{1kPa}=3260Pa[/tex]
Now, since Pa is equal to N/m², and 1 m equals 100 cm, the pressure in newton per square centimeter turns out:
[tex]3260\frac{N}{m^2}*(\frac{1m}{100cm})^2 \\\\0.326\frac{N}{cm^2}[/tex]
Best regards.
HELP HELP
why are more common bone fractures among senior citizens than among young people
What is the name???????
Answer:
Carbon Hydrogen
Explanation:
I believe it means carbon (C) to one atom of hydrogen (H).
Please select the word from the list that best fits the definition
Represents a range of responses to a question:
Caption
Legend/Key
Scale
Answer:
The answer is B(scale)
Explanation:
Since the question asked about a range, the scale would be the most logical answer since scales are used to measure.
Answer:
the answer is C.
Explanation:
Lamark goes to a bowling alley to test his belief that rolling a bowling ball slowly will result in knocking down more pins. He gently rolls his bowling ball towards the bowling pins lined up at the end of the lane. The bowling ball stops in the middle of the lane without striking the pins. Which statement below best explains what happened?
Answer:
The ball's kinetic energy is transforming to potential energy.
Explanation:
the ball is stopping resulting in potential energy
Object A has a mass of 12g and a volume of 8cm3. object B has a mass of 20g and a volume of 8cm3 . which object has a greater density and by how much
Answer:
Object B has a density of 2.5 g/cm³ which is greater than object A by 1 g/cm³
Explanation:
Since we know that the formula for density is d=m/v, we can divide each mass by its corresponding volume to find the densities
12/8=1.5
20/8=2.5
So we know that object B has a greater density than object A by 1 g/cm³ (gram per cubic centimeter). Also the standard unit for density is kilograms per cubic meter but I used gram per cubic centimeter since they were the given units. 1cm=100m, 1000g=1km
Find the volume of an object that has a density 0f 3.14g/mL and a mass of 87.3g
Answer:
The answer is 27.80 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question
mass = 87.3 g
density = 3.14 g/mL
We have
[tex]volume = \frac{87.3}{3.14} \\ = 27.8025477...[/tex]
We have the final answer as
27.80 mLHope this helps you
Which of the following reactions would you expect to produce the most energy?
A. Nuclear fusion of two hydrogen isotopes.
B. Combustion of hydrogen gas.
C. Combination of a strong acid and a strong base.
D. Burning a large hydrocarbon, such as oil.
Answer:
A
Explanation:
Nuclear fusion is a much more powerful reaction than any of the others.
Nuclear fusion of two hydrogen isotopes would expect to produce the most energy. Therefore, option (A) is correct.
What is nuclear fusion?Nuclear fusion can be defined as when two or more nuclei fuse together to form a single heavier nucleus. In this reaction, the matter is generally not conserved due to some of the mass of the nuclei being converted to energy.
For nuclear fusion, the nuclei must be brought closer to the reaction occurring. Each star in the universe, including sun, is shining due to nuclear fusion reactions. They produce large amounts of energy in this process.
In the Sun's core, hydrogen nuclei are get transformed into helium nuclei which are known as nuclear fusion. It takes place when four hydrogen nuclei fuse into each helium nucleus. During the Nuclear fusion process, some of the mass of hydrogen nuclei is transformed into energy.
Therefore, nuclear fusion is where hydrogen atoms combined to form helium to produce the most energy.
Learn more about nuclear fusion, here:
brainly.com/question/12701636
#SPJ2
Now
Selec
BI
Toda
OOOOOO
How and why do ionic bonds form? Check all of the boxes that apply
lonic bonds form between metal atoms and other metal atoms.
Ionic bonds form between metal atoms and nonmetal atoms
The more electronegative atoms transfer one or more electrons to the less electronegative atom
The less electronegative atoms transfers one or more electrons to the more electronegative atom,
The metal atom forms a cation and the nonmetal atom forms an anion
The attraction between ions with the same charge forms an ionic bond,
The attraction between ions with an opposite charge forms an ionic bond.
BLO
I lo
DONE
Elo
Yous
Answer:
✔️Ionic bonds form between metal atoms and nonmetal atoms.
✔️The less electronegative atoms transfers one or more electrons to the more electronegative atom
✔️The metal atom forms a cation and the nonmetal atom forms an anion.
✔️The attraction between ions with an opposite charge forms an ionic bond.
Explanation:
Ionic bond refers to the bond formation which occurs when there is complete and permanent transfer of electrons from one metal atom to another non-metal atom. The metals, which are electropositive (less electronegative) loose their electrons while the non-metals, which are less electropositive (more electronegative) gain the electrons.
When the metal atom looses electrons, they form cations(become positively charged) while non-metal atom forms anions (become negatively charged). When the opposite charges attract each other, they form ionic bond.
Answer:
✔️ Ionic bonds form between metal atoms and nonmetal atoms.
✔️ The less electronegative atoms transfers one or more electrons to the more electronegative atom.
✔️ The metal atom forms a cation and the nonmetal atom forms an anion.
✔️ The attraction between ions with an opposite charge forms an ionic bond.
What are the factors affecting your limitations? How about possibilities?
Explanation:
My physiological make-up that governs the attributes I have and my climate, i.e. the conditions I have, are the variables influencing my limits. Biological make-up also regulates my prospects when they depend on my attributes, i.e. my ability and my environment , i.e. the conditions under which I am. This has been shown by experiments on twins, that our limits and opportunities are controlled by both genetics and environment.
A cell must work to maintain a stable internal environment. It is also important for the environment around the cell to be stable. What reasoning explains what happens when the concentration of water inside a cell is lower than the concentration of water outside the cell?
The cell loses nutrients.
The cell splits and creates two new cells.
The cell gains too many lipids and carbohydrates.
The cell either loses water and dries up or gains too much water and bursts.
(science 7th grade)
Answer: the last one
Explanation: if a cell has too little water, it will begin to function incorrectly, and if a cell has too much water it will burst.
Photosynthesis
Definition in youre own words? thank you<3
Answer:
the process of plants taking the sunlight and turning it into food for the plant.
Explanation:
Sodium is located above potassium in Group 1 of the periodic table. If a potassium ion has a charge of +1, what is the charge on a sodium ion?
A. -1
B 0
C. +1
D +2
Answer:
C
Explanation:
It will be the same. That's what moving down a column means. The properties are going to be quite similar.
The heat of vaporization for benzaldehyde is 48.8 kJ/mol, and its normal boiling point is 451.0 K. Use this information to determine benzaldehyde’s vapor pressure (in torr) at 53.5°C. Report your answer to three significant digits.
Answer:
[tex]p_2=5.17torr[/tex]
Explanation:
Hello.
In this case, by using the Clausius-Clapeyron Equation which allows us to relate the vapor pressure, temperature and heat of vaporization as shown below:
[tex]ln(\frac{p_1}{p_2} )=\frac{\Delta _vH}{R}(\frac{1}{T_2}-\frac{1}{T_1} )[/tex]
Whereas [tex]p_1[/tex] is 760 torr due to the normal conditions. In such a way, for computing the vapor pressure of benzaldehyde at 53.5 °C (326.65 K), we proceed as shown below:
[tex]\frac{p_1}{p_2} =exp[\frac{48800J/mol}{8.314\frac{J}{mol*K}}(\frac{1}{326.65K}-\frac{1}{451.0K} )]\\\\\frac{p_1}{p_2}=147.0[/tex]
Thus, the vapor pressure at the final T is:
[tex]p_2=\frac{p_1}{147.0}=\frac{760torr}{147.0}\\ \\p_2=5.17torr[/tex]
Best regards!
A bomb calorimeter with a heat capacity of 837 J∘C contains 745 g of water. It burns 2.50 g C8H18 resulting in the temperature going from 15.0∘C to 33.8∘C. What is the value of the heat transferred (in kilojoules) by the reaction from the perspective of the system?
Answer:
74.3kJ are transeferred
Explanation:
In the bomb calorimeter, the burning of C₈H₁₈ is producing heat that is been absorbed for the calorimeter and the water.
Heat absorbed calorimeter:
837J/°C * (33.8°C-15.0°C) = 15735.6J
Heat absorbed water:
C*m*ΔT
C specific heat of water (4.184J/g°C), m is mass of water (745g), and ΔT change in temperature (33.8°C - 15°C = 18.8°C)
4.184J/g°C*745g*18.8°C = 58601.1J
Heat released by the reaction:
15735.6J + 58601.1J = 74336.7J
74.3kJ are transeferred
Assuming that a cheese sandwich consists of 2 slices of bread and 3 slices of cheese, determine the number of whole cheese sandwiches that can be prepared from 44 slices of bread and 63 slices of cheese.
Answer:
21 is the max but with the bread ypu could make 22 if you had 3 more cheese
1) Why does polysubstitution frequently occur with Friedel-Crafts alkylation but not with Friedel-Crafts acylation?2) If Benzene is reacted with t-butyl chloride, why is the chief disubstituted product the para rather than ortho isomer?
Answer:
See explanation
Explanation:
Friedel-Crafts alkylation frequently undergo polysubstitution because the process leads to the addition of an electron donating alkyl group, which activates the benzene ring to further alkylation. The acyl group rather deactivates the ring towards electrophilic substitution.
When benzene is reacted with t-butyl chloride, the chief disubstituted product is the para rather than ortho isomer because the increased bulk of the tert-butyl group hinders attack at the ortho-sites.
What happens when the sound waves released by a bat hit an object?
O The sound waves are diffused.
O The sound waves are reflected.
O The sound waves are refracted.
O The sound waves are absorbed.
Answer:
O The sound waves are reflected.
Explanation:
When sound waves released by a bat hits an object, the sound waves are reflected back.
Bats used sound reflection for echolocation to determine the position of nearby objects.
Also, they use it to determine the shape and size of objects.
The mechanism where bats use sound to determine location is known as echolocation. The bat picks up the reflected sound and projects the location of their targets.Answer:
B
The sound waves are reflected.
Explanation:
Literally struggling with this concept.(problem set included below)
The idea that the earth is divided into a number of small plates that float on the mantle and slide,collide,and slip past each other. Law or Theories
Answer:
Theories
Explanation:
It is theories because it was a generalistee abstract or thinking generalising the principle of fact about Earth tectonic plates ,it was formulated and concluded as plate tectonic theories after many findings. The theories conclude that the Earth has an outer layer called lithosphere and lies overly a plastic layer called asthenosphere. The lithosphere is divided into several plates and they move close to each other where they diverge, converge or slip over one another.
Which of the following rock will form if it is broken into sediment then emulsified over a long period of time?
Sedimentary rock
Magma rock
Metamorphic rock
Igneous rock
Which statement describes the effect of sorting and recombining genes in sexual reproduction?
Group of answer choices
offspring receive only recessive genes
offspring receive only dominant genes
offspring receive the same set of genes
offspring receive a unique combination of genes
What stress causes this type of fault to form? O compression O gravity O tension O shearing
Answer: It’s D
Explanation:
Cuz I said so
Answer: d. Shearing
Explanation:
Determine the pH of a 0.461 M C6H5CO2H M solution if the Ka of C6H5CO2H is 6.5 x 10-5. Determine the pH of a 0.461 M C6H5CO2H M solution if the Ka of C6H5CO2H is 6.5 x 10-5. 11.74 9.48 5.48 4.52 2.26
Answer:
the answer
Explanation:
the answer
The pH of the solution can be calculated using the Ka value and molarity of the acid. pH of the acid is obtained as 2.26.
What is pH?pH of a solution is the measure of acidity or basicity. Mathematically it is the negative logarithm of H+ ion concentration in the solution.
pH = - log [H+]
The constant Ka is called ionization constant of an acid. Acetic acid ionizes into equimolar concentrations of H+ and CH₃COO- ions. The Ka can be written as:
[tex]\rm K_{a} = \frac{[CH_{3}COO^{-}][H+]}{[CH_{3}COOH]}[/tex]
Where, [CH₃COO-] = [H+] Thus the expression becomes changed and from the values of Ka and molarity of the acid, H+ ion concentration can be calculated.
6.5 × 10⁻⁵ = [H+]² / [0.461 M]
[H+] = 0.0054.
Now, the pH can be calculated as follows:
pH = - log [0.0054]
= 2.26.
Therefore, the pH of the acidic solution is 2.26.
To find more on pH, refer here:
https://brainly.com/question/491373
#SPJ5
an area of high pressure occurs when
Answer:
A high-pressure area, high, or anticyclone, is a region where the atmospheric pressure at the surface of the planet is greater than its surrounding environment. Winds within high-pressure areas flow outward from the higher pressure areas near their centers towards the lower pressure areas further from their centers.
Explanation:
Is Kool-Aid dissolved in water in element compound or mixture?
Answer:
mixture
Explanation:
Kool-Aid is a mixture of sugar, water, dye, and flavoring.
Suppose a student needs to standardize a sodium thiosulfate, Na2S2O3,Na2S2O3, solution for a titration experiment. To do so, he or she will react it with a solution of iodine. The student adds a 1.00 mL1.00 mL aliquot of 0.0200 M KIO30.0200 M KIO3 solution to a flask, followed by 3 mL3 mL of distilled water, 0.2 g0.2 g of solid KI,KI, and 1 mL H2SO4.1 mL H2SO4. The student then titrates the solution with sodium thiosulfate solution in order to determine the exact concentration of Na2S2O3.Na2S2O3. The end point of the titration is reached after 0.90 mL0.90 mL of Na2S2O3Na2S2O3 is dispensed from a microburet. What is the concentration of the standard sodium thiosulfate solution?
Answer:
0.133
Explanation:
reaction between KIO3 and KI in acidic medium
IO3⁻ +5I⁻ +6h⁺ → 3I₂ + 3H₂O
I₂ reacts with thiosulphate
NaS₂O₃ → 2Na⁺ + S₂O₃²⁻
net reaction
IO⁻₃ + 6H⁺ + 6S₂O₃³⁻ → I⁻ + 3S₄O₆²⁻ + 3H₂O
mole of KIO₃
= molarity x volume
[tex]\frac{0.02mol}{L} *0.01L[/tex]
= 0.00002mol
a mole of KIO₃ has reaction with 6 mol of S₂O₃²⁻
= 2x6x10⁻⁵
= 0.00012 mol
volume = 0.90 ml
1 ml = 0.001L
0.90ML = 0.0009L
to get concentration,
molarity/volume
= 0.00012/0.0009
= 0.133m
The concentration of the standard sodium thiosulfate solution is ; 0.133
The net chemical reaction equation
IO₃⁻ + 6H⁺ + 6S₂O₃³⁻ ----> I⁻ + 3S₄O₆²⁻ + 3H₂O
First step : Determine the moles of KIO₃
number of moles = molarity * volume
= 0.02 mol / L * 0.01 L
= 0.00002 mol
From the net chemical reaction equation
one ( 1 ) mole of KIO₃ reacts with 6 moles of S₂O₃²⁻
∴ number of moles in the reaction = 6 * 0.00002 = 0.00012 mol.
Final step : Determine the concentration of sodium thiosulfate solution
Given Volume = 0.90 ml = 0.0009 L
∴ concentration of sodium thiosulfate solution
= 0.00012 / 0.0009 = 0.133
Hence we can conclude that The concentration of the standard sodium thiosulfate solution is ; 0.133
Learn more : https://brainly.com/question/15271672
describe the structure and function of gamma rays
Answer:
A gamma ray is a penetrating form of electromagnetic radiation arising from the radioactive decay of atomic nuclei. It consists of the shortest wavelength electromagnetic waves and gives off the highest photon energy. The energy spectrum of gamma rays can be used to identify the decaying radionuclides using gamma spectroscopy.
Explanation:
Pls, Help ASAP with 30 points!!!
Describe the similarities and differences between the eruptions of
less gassy and more gassy magma.
Answer:
the difference is tyat eruptions of less gassy and more gassy is that the less gassy doesnt retain as much gas as the more gassy one and thus the eruption of the less gassy is less damage to the more gassy
Can you guys answer question 4 on new substance for Chemistry tysm
The answer is a bevasue it then becomes a chemical compound
Answer:
a
Explanation:
this would result in a compound and compounds are chemical changes so i think im right....
Define dynamic equilibrium.
a) no reactants react no products are formed the rate of the forward reaction
b) is faster than the rate of the reverse reaction the rate of the reverse reaction
c) is faster than the rate of the forward reaction the rate of the forward reaction
d) equals the rate of the reverse reaction
Answer:
d) The rate of forward reaction equals the rate of the reverse reaction
Explanation:
A dynamic equilibrium is attained when the rate of forward reaction is the same as reverse reaction. It occurs majorly in a reversible reaction. Thus, no change occurs in the reaction.
The process can be control by the immediate removal of the product as it is formed. This ensure that the reaction stops when all reactants are used up.