''The rays that seem to emanate from a virtual image do not in fact emanate from the image'' . Explain the statement

Answer:

r = 2.55 m

Explanation:

Given that,

First charge, q₁ = 32.2 μC

Second charge, q₂ = + 12.3 μC

The force between charges, F = 0.544 N

We need to find the distance between charges. The force between two charges is given by the formula as follows :

[tex]F=k\dfrac{q_1q_2}{r^2}\\\\r=\sqrt{\dfrac{kq_1q_2}{F}} \\\\r=\sqrt{\dfrac{9\times 10^9\times 32.2\times 10^{-6}\times 12.3\times 10^{-6}}{0.544}} \\\\r=2.55\ m[/tex]

So, the charges are 2.55 m apart.

Answer:

2.55

Explanation:

Right on Acellus

Give the other guy brainliest

You can only give brainliest if 2 people answer

Answer:

The ampere, symbol A, is the SI unit of electric current. It is defined by taking the fixed numerical value of the elementary charge e to be 1.602 176 634 x 10-19 when expressed in the unit C, which is equal to A s, where the second is defined in terms of ΔνCs.

the device used to measure current in a circuit is ammeter

Answer:

a tendency to do nothing or to remain unchanged.

Explanation:

Answer:

Inertia: The resistance an object has to a change in its state of motion.

Explanation:

Hope it helps....

Have a great day!!

Answer:

.

Explanation:

Answer:

Its indirectly Proportional

Explanation:

Answer:

Option B

Explanation:

As we know phase difference is equal to

[tex]\psi = \frac{2\pi }{\lambda} * \Delta[/tex] ----Eq (1)

where

[tex]\Delta[/tex] is the physical difference between two points = 0.025 m

[tex]\lambda[/tex] is equal to [tex]\frac{v}{f}[/tex]

[tex]\lambda = \frac{20}{100} = 0.2[/tex]

Substituting the given values in above equation, we get -

[tex]\psi[/tex] =

[tex]\frac{2\pi }{0.2} *0.025\\\frac{\pi }{4}[/tex]

Hence, option B is correct

Answer:

m1 v1 + m2 v2 = m1 V1 + m2 V2       conservation of momentum

m1 = 3    m2 = 6

v2 = -4.6

V1 = -4.2

V2 = -1.5

v1 = (m1 V1 + m2 V2 - m2 v2) / m1

v1 = (3 * -4.2 + 6 * -1.5 - 6 * -4.6) / 3

v1 = (-12.6 - 9 + 27.6) / 3 = 2  initial velocity of 3 kg ball

Check:

3 * 2 + 6 * -4.6 = -21.6

3 * -4.2 + 6 -1.5 = -21.6

Answer:

(a) The time the ball stays in the air is approximately 4.66 seconds

(b) The distance from the cannon at which the ball will hit the ground is approximately 83.18 meters

(c) The maximum altitude of the ball is approximately 26.62 m

Explanation:

The given parameters of the question are;

The initial velocity at which a baseball cannon fires balls, u = 29 m/s

The angle at which the cannon is tilted, θ = 52°

(a) The time duration the ball stays in the air is given by the time of flight of the projected ball as follows;

[tex]2 \cdot t = \dfrac{2 \cdot u \cdot sin (\theta)}{g}[/tex]

Where;

t = The time it takes the baseball to reach maximum height

2·t = The total time of flight = The time the ball stays in the air

θ = The angle at which the ball is tilted = 52°

g = The acceleration due to gravity ≈ 9.81 m/s²

u = The initial velocity = 29 m/s

Therefore, we have;

[tex]2 \cdot t = \dfrac{2 \times 29 \ m/s\times sin (52^{\circ})}{9.81 \ m/s^2} \approx 4.66 \ s[/tex]

The time the ball stays in the air, 2·t ≈ 4.66 seconds

(b) The distance from the cannon at which the ball will hit the ground is given by the horizontal range, 'R', of the projectile as follows;

[tex]Horizontal \ range, R = \dfrac{u^2 \cdot sin(2 \cdot \theta) }{g}[/tex]

∴ The distance from the cannon at which the ball will hit the ground = R

[tex]Horizontal \ range, R = \dfrac{(29 \ (m/s))^2 \cdot sin(2 \times 52^{\circ}) }{9.81 \ m/s^2} \approx 83.18 \, m[/tex]

The distance from the cannon at which the ball will hit the ground = R ≈ 83.18 meters

(c) The maximum altitude of the ball is equal to the maximum height reached by the ball, H, which is given as follows;

[tex]H = \dfrac{u^2 \cdot sin^2 (\theta)}{2 \cdot g}[/tex]

Therefore, we have;

[tex]H = \dfrac{(29 \ m/s)^2 \times sin^2 (52^{\circ})}{2 \times 9.81 \ m/s^2} \approx 26.62 \ m[/tex]

The maximum altitude of the ball ≈ 26.62 m

Answer:

The reason why one cannot hear in space but light can be seen is because light and sound are different kinds of wave

Light is an electromagnetic wave that propagates by a changing magnetic field hat creates a changing electric field. Light is created by a vibrating electric charge, and is transmitted through a medium by the absorption and reemission of the light by the medium particles

Sound is a longitudinal mechanical wave that is propagated by the vibration of the particles of the medium.

Sound requires a medium to propagate and it cannot be propagated or heard through space which is a vacuum.

Sound is created by a source that is vibrating and the vibration is transmitted to particles in the medium including solids, liquids, gases and plasma that the vibrating energy is in direct contact with and the transfer of the sound energy continues between layers of adjacent particles for the medium for the sound to be propagated from place to place

Explanation:

Hey there!

Based on the info this planet is likely to be located near the sun. If you would like to be exact it would be between Mercury and Venus. This is because it’s orbital period is half a year, Venus is about 3/4 of a year, and Mercury is about 1/3 of a year. Hopefully this helps! Good luck!

Answer:

B and C is the Answer

Follow me please

Mark brainliest

Answer:

When object is placed between convex lens and focal point, image formed is virtual and magnified which is shown in the diagram. Was this answer helpful?

Answer:

Unbalanced forces change the motion of an object. If an object is at rest and an unbalanced force pushes or pulls the object, it will move. Unbalanced forces can also change the speed or direction of an object that is already in motion.

Answer:

With F = MA Its should take 500 Newtons

Explanation:

F = MA

Answer:

E

Explanation:

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: Something that's vibrating, and you also need medium for those vibrations to start in.

I hope this helped!

<!> Brainliest is appreciated! <!>

- Zack Slocum

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer:

heyy tell me ur yo u tube ch annel name I'll subscribe it and how many sub scriber u have friend

Explanation:

and are u from Ireland?

Answer:

86.5 m

Explanation:

[tex]s = ut + \frac{1}{2} at {}^{2} \\ s = (0)(4.2) + \frac{1}{2} (9.81)(4.2) {}^{2} \\ s = 86.5m [/tex]

Answer:

86.5 m

Explanation:

Explanation:

C. neutron.

it does not contain ionizing characteristics.

hope it helps. :)

Isolate the variable by dividing each side by factors that don't contain the variable.

m

=

32.021

¯

3

s

Answer:

Higher moments of inertia indicate that more force has to be applied in order to cause a rotation whereas lower moments of inertia means that only low forces are necessary. Masses that are further away form the axis of rotation have the greatest moment of inertia.

Answer:

yes

Explanation:

because -20m/s means decrease in acceleration and Time , why 10m/s means increase in acceleration and Time

Answer:

36.36 m/s

Explanation:

From the question,

Applying the law of conservation of momentum.

Total momentum before collision = Total momentum after collision .

mu+m'u' = V(m+m')................ Equation 1

Where m = mass of the rocket, m' = mass of the wood, u = initial velocity of the rock, u' = initial velocity of the wood, V = Final velocity after collision

But, the wood was initially at rest

Therefore, u' = 0 m/s

mu = V(m+m')

make V the subject of the equation

V = mu/(m+m')................. Equation 2

Given: m = 0.5 kg, u = 400 m/s, m' = 50 kg

Substitute these values into equation 2

V = (0.5×400)/(0.5+50)

V = 200/5.5

V = 36.36 m/s

Answer:

Sea fish

Explanation:

Sea fish doesn't breath through their gills but dissolved oxygen in water through gills

Answer:

1280Nm

Explanation:

torque= I×alpha(angular acceleration)

so Angular acceleration is found by the following process.

Answer:

The statement which explains how the total time spent in the air is affected as the projectile's angle of launch increases from 25 degrees to 50 degrees is;

C. Increasing the angle from 25° to 50° will increase the total time spent in the air

Explanation:

The equation that can be used to find the total time, T, spent in the air of a projectile is given as follows;

[tex]T = \dfrac{2 \cdot u \cdot sin(\theta) }{g}[/tex]

Where;

T = The time of flight of the projectile = The time spent in the air

u = The initial velocity of the projectile

θ = The angle of launch of the projectile

g = The acceleration due to gravity ≈ 9.81 m/s²

Given that sin(50°) > sin(25°), when the angle of launch, θ, is increased from 25 degrees to 50 degrees, we have;

Let T₁ represent the time spent in the air when the angle of launch is 25°, and let T₂ represent the time spent in the air when the angle of launch is 50°, we have;

[tex]T_1 = \dfrac{2 \cdot u \cdot sin(25^{\circ}) }{g}[/tex]

[tex]T_2 = \dfrac{2 \cdot u \cdot sin(50^{\circ}) }{g}[/tex]

sin(50°) > sin(25°), therefore, we have;

[tex]\dfrac{2 \cdot u \cdot sin(50^{\circ}) }{g} > \dfrac{2 \cdot u \cdot sin(25^{\circ}) }{g}[/tex]

Therefore;

T₂ > T₁

Therefore, increasing the angle at which the projectile is launched from 25° to 50° will increase the total time spent in the air.

Answer:

[tex]v = 14.78m/s[/tex]

Explanation:

Given

[tex]KE = 150J[/tex]

[tex]p = 20.3kgm/s[/tex]

Required

Determine the object's speed

Kinetic Energy is calculated as:

[tex]KE = \frac{1}{2}mv^2[/tex]

Make m the subject

[tex]m = \frac{2KE}{v^2}[/tex]

Momentum is calculated as:

[tex]p = mv[/tex]

Make m the subject

[tex]m = \frac{p}{v}[/tex]

So, we have:

[tex]m = \frac{p}{v}[/tex] and [tex]m = \frac{2KE}{v^2}[/tex]

Equate both expressions: [tex]m = m[/tex]

[tex]\frac{2KE}{v^2} = \frac{p}{v}[/tex]

Multiply both sides by v

[tex]v * \frac{2KE}{v^2} = \frac{p}{v}*v[/tex]

[tex]\frac{2KE}{v} = p[/tex]

Make v the subject

[tex]v = \frac{2KE}{p}[/tex]

Substitute [tex]KE = 150J[/tex] and [tex]p = 20.3kgm/s[/tex]

[tex]v = \frac{2 * 150}{20.3}[/tex]

[tex]v = \frac{300}{20.3}[/tex]

[tex]v = 14.78m/s[/tex]

Answer:

Explanation:Hertz is used to measure frequency, but decibel is used to measure intensity level.