the regional transit authority for a major metropolitan area wants to determine whether there is a relationship between the age of a bus and the annual maintenance cost. a sample of ten buses resulted in the following data. click on the datafile logo to reference the data. age of bus (years) annual maintenance cost ($) 1 350 2 370 2 480 2 520 2 590 3 550 4 750 4 800 5 790 5 950 (a) choose a scatter chart below with age of bus as the independent variable. (i) (ii) (iii) (iv) - select your answer - what does the scatter chart indicate about the relationship between age of a bus and the annual maintenance cost? the scatter chart indicates there may be a - select your answer - linear relationship between age of bus and annual maintenance cost. older buses generally cost more to maintain, and this scatter chart is consistent with what is expected. (b) use the data to develop an estimated regression equation that could be used to predict the annual maintenance cost given the age of the bus. what is the estimated regression model? let x represent the age of the bus. if required, round your answers to two decimal places. for subtractive or negative numbers use a minus sign even if there is a sign before the blank. (example: -300)

False.

If rank(A) = 4 in a 5 by 5 matrix A, it means that the column space of A has dimension 4. In other words, the columns of A span a subspace of dimension 4 in R^5.

In linear algebra, the rank of a matrix A is the dimension of the column space of A, which is the subspace of R^n spanned by the columns of A. The column space of A is a subspace of R^n, so its dimension can be at most n. Therefore, if rank(A) = n, then the columns of A form a basis of R^n, which means that they span the entire space R^n and are linearly independent.

In the case where rank(A) < n, the columns of A do not span the entire space R^n, which means that they cannot form a basis of R^n. Instead, they span a subspace of R^n of dimension equal to the rank of A. This subspace can be thought of as a "shadow" of R^n that is cast by the columns of A.

In the specific case of a 5 by 5 matrix A with rank(A) = 4, the columns of A span a subspace of dimension 4 in R^5. This means that the columns of A cannot span the entire space R^5, since their dimension is less than 5. Therefore, the columns of A cannot form a basis of R^5. However, they do span a subspace of R^5 of dimension 4, and this subspace is an important object of study in linear algebra.

Visit to know more about Matrix:-

brainly.com/question/30218994

#SPJ11

With multiple regression model on the specific data in the house sales Excel file, I am unable to provide you with a prediction for the sales price of a single-family home or townhouse with a lot cost of $30,000.

As the Excel file house sales is not available to me, I cannot provide you with the specific multiple regression model for sales price as a function of lot cost and type of home. However, I can give you the general steps to develop a multiple regression model:

Start by exploring the data with summary statistics and visualizations to get an idea of the relationship between the variables.

Create a scatterplot matrix to visualize the relationships between the variables.

Use a correlation matrix to check for multicollinearity between the predictor variables.

Fit a multiple regression model with sales price as the dependent variable and lot cost and type of home as the independent variables.

Check the model assumptions by examining the residuals and residuals plot.

Check for any outliers and influential points that may affect the model.

Test for interaction effects between lot cost and type of home using the appropriate statistical tests.

If an interaction effect is present, include an interaction term in the model.

Evaluate the model performance using metrics such as R-squared, adjusted R-squared, and root mean squared error (RMSE).

Once you have a final model, use it to predict the sales price for a single-family home or townhouse with a lot cost of $30,000.

To know more about multiple regression model,

https://brainly.com/question/29855836

#SPJ11

The correct set of transformations is "Dilation by a scale factor of 2 followed by reflection about the x-axis".

Compare the corresponding side lengths to find the scale factor of the dilation.

For example, the distance between X and Y is √2 in triangle XYZ, and the distance between X'' and Y'' is 2√2 in triangle X''Y''Z''.

Therefore, the scale factor of the dilation is 2.

Now, find the direction of the reflection.

The y-coordinates of corresponding points in the two triangles have the same absolute values but opposite signs, which suggests a reflection about the x-axis.

Therefore, the correct set of transformations is:

Dilation by a scale factor of 2 followed by reflection about the x-axis.

Learn more about the dilation here:

brainly.com/question/13176891

#SPJ1

The estimated number of people in the city who spend between 10 - 14 hours a week on social media, is 24, 187 people .

The survey showed that 90 people out of 350 would spend about 10 - 14 hours a week on social media. In percentage terms, this would be:

= 90 / 350 x 100 %

= 25. 7 %

The survey can be applied to the entire population of Sunrise, FL to find out the approximate number of people in the town who spend between 10 - 14 hours on social media. This number would be:

= Percentage shown by survey x Population

= 25. 7 % x 94, 060

= 24, 187 people

Find out more on population at https://brainly.com/question/29101183

#SPJ1

The first part of the question is:

A survey showed that out of 350 people in Sunrise, FL, 90 people spend between 10 - 14 hours a week on social media.

The 80 % confidence interval for the true mean yield and the critical value that should be used in constructing the confidence interval will be 1.886.

From the information, a random sample of 3 fields of rye has a mean yield of 33.1 bushels per acre and standard deviation of 9.91 bushels per acre.

Based on the calculation, the critical value =1.886, lower endpoint =22.3 , upper endpoint =43.9. Check the attachment.

Learn more about critical value on

https://brainly.com/question/14040224

#SPJ1

As per the given data, the true proportion of nearsighted children is equal to 8%.

When an experiment is employed as the technique of examination, the two variations of the hypothesis the null hypothesis and the alternative hypothesis that is frequently utilised in research are referred to as the experimental hypothesis. The null hypothesis (H0) states that 8% of children are truly nearsighted. The alternative hypothesis (H1) states that the actual percentage of children who are nearsighted is lower than 8%.

The alternative hypothesis contends that the real proportion of nearsighted youngsters is different from 8%, whereas the null hypothesis argues that the 8% estimate is accurate. These hypotheses can be used in a hypothesis test to see if the sample data have enough support for the alternative hypothesis, which states that the 8% number is incorrect, to be accepted instead of the null hypothesis.

Read more about hypothesis on:

https://brainly.com/question/29576929

#SPJ4

To display this data, I advise using a box plot or a histogram.

The distribution of package weights may be shown in a histogram, which also shows how many parcels fall within the 100-125 ounce range. The histogram can be used to find any trends or outliers in the data that can point to problems with the packing methods.

An expanded description of the data, including the median, quartiles, and any outliers, would be shown in a box plot.

Also, it would demonstrate if most of the packages fall within the acceptable weight limit. It would be very helpful to use a box plot to see any severe outliers that could be distorting the data.

By giving the data a visual representation and highlighting any trends or outliers that would point to problems with the packing operations, both of these data presentations would aid in deciding if the packaging techniques needed to be updated.

Learn more about sample space here:

brainly.com/question/30206035

#SPJ1

The point A after reflection over the line y = 1 becomes A' (-3,3).

Reflection is the transformation which produces a mirror image of an object. The mirror image can be either about any line.

In our question,

The object is a triangle ∠ABC and the line is y=1.

Point A before reflection (equation 1):

A = (-3,-1)

After reflection, the point is shifted along y axis and x remains constant.

Reflection about y=1 of point A:

A ⇔ A'

( x, y) ⇔ ( x, y+4)'

Put the values of x and y using equation 1.

(-3, -1) ⇔ ( -3, -1+4)'

(-3, -1) ⇔ (-3, -1) ⇔ ( -3, -1+4)'

Hence the point A will transform to the point A' (-3, 3) after reflecting about y=1.

Learn more about  reflection on https://brainly.com/question/30270479

#SPJ1

The probability of the red die showing a 5 is 1/6 since there are 6 possible outcomes on a die and only one of them is a 5. The same goes for the blue die. Therefore, the probability of both dice showing a 5 is 1/6 x 1/6 = 1/36. So the reduced fraction for this probability is 1/36.

The probability of the red die showing a 5 and the blue die showing a 5 can be calculated by finding the individual probabilities and multiplying them.

For each die, there are 6 possible outcomes (1-6), and only one of those outcomes is a 5. So, the probability of getting a 5 on a single die is 1/6.

Now, multiply the probabilities for the red die and the blue die:
(1/6) * (1/6) = 1/36

So, the probability of the red die showing a 5 and the blue die showing a 5 is 1/36 as a reduced fraction.

Learn more about probability here:

https://brainly.com/question/14210034

#SPJ11

The second number in an ordered pair is the y-coordinate and corresponds to a number on the y-axis.

In this pair, the 1st number represents x-coordinate and corresponds to position on x-axis while 2nd number represents y-coordinate and corresponds to position on the y-axis.

The y-axis, a vertical line, runs along the graph with positive values above the origin and negative values below the origin.

The y-coordinate tells about level of high or low which the point is on y-axis. In conclusion, the second number in an ordered pair is the y-coordinate and corresponds to a number on the y-axis.

Read more about ordered pair

brainly.com/question/11139505

#SPJ1

As per the mentioned informations and the given values, the area of the shaded region is calculated to be 52cm².

The width of the rectangular garden with an area of 120 square meters and length 15 meters is 8 meters.

To find the area of the shaded region in the diagram that shows squares of sides 8cm, 8cm, 12cm, and 18cm, we need to first determine which area is shaded. Assuming that the shaded area is the region between the 18cm square and the other squares, we can calculate its area as follows:

Area of the shaded region = Area of the 18cm square - Area of the 12cm square - 2(Area of the 8cm square)

= (18cm x 18cm) - (12cm x 12cm) - 2(8cm x 8cm)

= 324cm² - 144cm² - 128cm²

= 52cm²

Therefore, the area of the shaded region in the diagram is 52cm².

Learn more about Area :

https://brainly.com/question/12374325

#SPJ4

The complete question is :

A rectangular garden has an area of 120 square meters. If the length is 15 meters, what is the width of the garden? What is the area of the shaded region in a diagram that shows squares of sides 8cm, 8cm, 12cm, and 18cm?

Answer:

Step-by-step explanation: can you possibly be more specific please.

Answer:

What do you need help with?

Step-by-step explanation:

give further info.

r u okay? or is it a math problem

The Mean Value Theorem (MVT) is a theorem in calculus that relates the derivative of a function to the average rate of change of the function over a given interval.

The Mean Value Theorem states that if a function f is continuous on the closed interval [a, b] and differentiable on the open interval (a, b), then there exists a number c in (a, b) such that:

f'(c) = (f(b) - f(a)) / (b - a)

To find all numbers c that satisfy the conclusion of the Mean Value Theorem, we need to check if the hypotheses of the theorem are satisfied, i.e. if the function is continuous on the closed interval and differentiable on the open interval.

Without the specific function and interval provided, we cannot determine all numbers c that satisfy the conclusion of the Mean Value Theorem. Please provide more information so we can help you better.

learn about Mean Value Theorem,

https://brainly.com/question/30403137

#SPJ11

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{\textit{\LARGE a}\% of \textit{\LARGE b}}\\ \cline{1-1} \\ \left( \cfrac{\textit{\LARGE a}}{100} \right)\cdot \textit{\LARGE b} \\\\ \cline{1-1} \end{array}~\hspace{5em}\stackrel{\textit{68\% of 32}}{\left( \cfrac{68}{100} \right)32}\implies 21.76[/tex]

Answer: 21.76 or 0.22

Step-by-step explanation: You put in 68% and 32 then you'll get 21.76

32=100

and .68%

32=100%(1)

68%(2)

.68/100

Then 0.22 or 21.76

The graph of line a and line b is shown in the image attached below. The lines do not intersect each other.

To check if both lines intersect, we need to graph the system of equations. First, use the points given to write out the equations.

Line a:

Slope (m) = change in y / change in x = 6 - 4 / 8 - 0 = 2/8

m = 1/4

Find the y-intercept (b) by substituting m = 1/4, x = 0 and y = 4 into y = mx + b:

4 = 1/4(0) + b

b = 4

The equation of line a is: y = 1/4x + 4.

Line b:

Slope (m) = change in y / change in x = 1 - (-2) / 8 - 0

m = 3/8

Find the y-intercept (b) by substituting m = 3/8, x = 0 and y = -2 into y = mx + b:

-2 = 3/8(0) + b

b = -2

The equation of line b is: y = 3/8x - 2.

Both lines are graphed in the image attached below. Line a is the red line and line b is the red line. They do not intersect at any point.

Learn more about graph of system of equations on:

https://brainly.com/question/14323743

#SPJ1

The point P that partitions the line segment AB three fourths of the way from A to B is given as follows:

P(3.75, 4.5).

The coordinates of point B are obtained applying the proportions in the context of the problem.

The point P partitions the line segment AB three fourths of the way from A to B, hence the equation is given as follows:

P - A = 3/4(B - A).

Then the x-coordinate of the point is given as follows:

x - 3 = 3/4(4 - 3)

x = 3 + 3/4

x = 15/4.

x = 3.75.

The y-coordinate of the point is given as follows:

y - 5 = 3/4(3 - 5)

y - 5 = -1.5

y = 4.5.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

We can actually see here that all the true statements are:

A. The mean is the most appropriate measure of center for the 8th graders.

C. The range describes the difference between the greatest and least minutes.

We can deduce here that in Mathematics, "mean" is usually used to calculate the average value of a set of numbers. The arithmetic mean is usually known to be the most common type of mean amongst others.

The arithmetic mean is usually obtained by adding up all the numbers in the set and then dividing by the total number of numbers.

All the true statements are seen above.

Learn more about mean on https://brainly.com/question/1136789

#SPJ1

The number of jars that the raspberry jam fill will be 2/9.

Vijay created raspberry and strawberry jam. He made 2/3 of a jar's worth of strawberry jam. If he produced just a third as much strawberry jam as raspberry jam.

Algebra is the study of abstract symbols, while logic is the manipulation of all those ideas.

The number of jars that the raspberry jam fill is calculated as,

⇒ (2/3) x (1/3)

⇒ 2/9

More about the Algebra link is given below.

https://brainly.com/question/953809

#SPJ1

The area of the polygon are:

1. 3358 square inch

2. 54 square yd

3. 54 square in

4. 384 square units

5. 18 square ft

6. 356.76 square yd

1. Rectangle

formula: length x width

= 73 * 46

= 3358 square inch

2. Parallelogram

formula: base x height

= 3 * 18

= 54 square yd

3. Parallelogram

formula:1/2 (sum of parallel lines) x height

= 1/2 (3 + 17) x 8

= 54 square in

4. Kite

formula:1/2 product of diagonals

= 1/2 (12 + 20) x (12 + 12)

= 384 square units

5. Triangle

formula: 1/2 x base x height

= 1/2 x 9 x 4

= 18 square ft

5. Regular pentagon

formula: 1/2 x perimeter x apothem

= 1/2 x (5 x 14.4) x 9.91

= 356.76 square yd

Learn more about areas of polygon at

https://brainly.com/question/20110859

#SPJ1

To design a binary counter with the repeated binary sequences (a) 0, 1, 2 and (b) 0, 1, 2, 3, 4, 5, we can use D flip-flops and logic gates as follows:

(a) Binary counter for sequence 0, 1, 2:

We need two D flip-flops to store the binary value of the counter. Let's call the flip-flops Q1 and Q0, where Q1 is the MSB (most significant bit) and Q0 is the LSB (least significant bit). We also need some logic gates to determine the next state of the counter based on the current state.

The next state of the counter can be determined by the following truth table:

Q1 Q0 next Q1 next Q0

0 0 0 1

0 1 1 0

1 0 1 1

1 1 0 0

We can implement this truth table using the following logic gates:

   The D input of flip-flop Q0 is connected to the output of an XOR gate that has inputs Q1 and Q0.

   The D input of flip-flop Q1 is connected to the output of an AND gate that has inputs Q1 and NOT(Q0).

The initial state of the counter is 0, 0. When the clock signal is applied, the counter will sequentially count through the binary values 0, 1, 2, and then repeat.

(b) Binary counter for sequence 0, 1, 2, 3, 4, 5:

We need three D flip-flops to store the binary value of the counter. Let's call the flip-flops Q2, Q1, and Q0, where Q2 is the MSB and Q0 is the LSB. We also need some logic gates to determine the next state of the counter based on the current state.

The next state of the counter can be determined by the following truth table:

Q2 Q1 Q0 next Q2 next Q1 next Q0

0 0 0 0 0 1

0 0 1 0 1 0

0 1 0 0 1 1

0 1 1 1 0 0

1 0 0 1 0 1

1 0 1 1 1 0

We can implement this truth table using the following logic gates:

   The D input of flip-flop Q0 is connected to the output of an XOR gate that has inputs Q1 and Q0.

   The D input of flip-flop Q1 is connected to the output of an XOR gate that has inputs Q2 and NOT(Q0).

   The D input of flip-flop Q2 is connected to the output of an XOR gate that has inputs Q1 and NOT(Q1) (which is equivalent to an XNOR gate).

The initial state of the counter is 0, 0, 0. When the clock signal is applied, the counter will sequentially count through the binary values 0, 1, 2, 3, 4, 5, and then repeat.

The probability equation for the situation is:

The probability that Letitia gets an A on her math test, P(A) is 0.45

The probability that Letitia studied given that she earned an A is 0.89

The probability equation for this situation is given as follows:

where:

The value of P (A) is given by the formula:

Substituting the values;

P(A) = 0.8 * 0.5 + 0.1 * 0.5

P(A) = 0.45

Hence, the probability equation for the situation will be:

P(study | A) = 0.8 * 0.5 / 0.45

b. The probability that Letitia gets an A on her math test is P(A)

P(A) = 0.45

c. The probability that Letitia studied given that she earned an A is given by the formula below:

Putting in the values

P(study | A) = 0.8 * 0.5 / 0.45

P(study | A) = 0.89 or approximately 89%

Learn more about probability at: v

#SPJ1

The volume of the triangular pyramid is 576 unit³.

We know the volume of a Triangular pyramid is

V = (1/3) x B x h

So, Base Area

= 1/2 x b x h

= 1/2 x 12 x 18

= 12 x 9

= 108 square unit

Now, the Triangular pyramid

= 1/3 x Base area x height

= 1/3 x 108 x 16

= 36 x16

= 576 unit³

Learn more about Volume here:

brainly.com/question/28338582

#SPJ1

Alexander can conclude that the inconstancy (spread) of the information in one dataset is twice as much as the changeability of the information within the other dataset.

The mean absolute deviation (MAD) could be a degree of inconstancy that depicts the normal separation between each information point and the cruelty of the dataset. The bigger the Frantic esteem, the more spread out the information is. The proportion of the implies to MADs of two datasets can be utilized to compare their spread.

In this case, the proportion of implies to MADs is 2.1. This implies that the cruelty of one dataset is 2.1 times bigger than the Frantic of that dataset, whereas the cruelty of the other dataset is as if it were 1 times bigger than its Frantic. Hence, the dataset with the bigger proportion (2.1) encompasses a bigger spread (inconstancy) compared to the other dataset.

To learn about mean absolute deviation visit:

https://brainly.com/question/10528201

#SPJ4

The moment of inertia of an object depends on its mass distribution and the distance of that distribution from the axis of rotation.

(a) For the hoop and pipe of the same mass and radius, the hoop has the larger moment of inertia because its mass is distributed farther from the axis of rotation.
(b) For the cylinder and disk of the same mass and radius, the cylinder has the larger moment of inertia because its mass is distributed farther from the axis of rotation.
(c) For the solid sphere, it has the largest moment of inertia out of the three objects because its mass is distributed uniformly at a greater distance from the axis of rotation compared to the other two objects.

So, the answer is (c) solid sphere.
Hi! Based on the given options, an object with the same mass and radius will have the largest moment of inertia if it is a hoop or pipe. The moments of inertia for the mentioned objects are:

(a) Hoop or pipe: I = MR^2
(b) Cylinder or disk: I = (1/2)MR^2
(c) Solid sphere: I = (2/5)MR^2

As you can see, the hoop or pipe has the largest moment of inertia among the given options.

Visit here to learn more about moment of inertia brainly.com/question/15246709
#SPJ11

The vectors has a magnitude of square root of 40 and a direction of θ = 251.565° is u = {-2, -6}. Option C

To find the vectors that has the stated magnitude, we check each vectors;

1. √(-7)² + (-2)² = √49 + 4 = √53 ≠ √40

Θ = arctan (-2/-7) = 15. 945 ≠ 251.565

Therefore {-7, -2} and {-2, -7} do not fit.

2. √(-6)² + (-2)²  = √36 + 4  = √40

tan Θ = -2/-6 = 1/3

Θ = arctan (1/3) + 180° = 18.43° ≠ 198.43°. Not it

3. √(-2)² + (-6)²  = √4 + 36  = √40

tan Θ = -6/-2 = 3

Θ = arctan (3) + 180° = 71.565° ≠ 251. 565°

The above answer is based on the question below as seen in the picture;

Which of the following vectors has a magnitude of square root of 40 and a direction of θ = 251.565°

a. u = (-7, -2)

b. u = (-6, -2)

c. u = (-2, -6)

d. u = (-2, -7)

Find more exercises on vectors;

https://brainly.com/question/4579006

#SPJ1

The probability that the article will have no errors is approximately 0.0233.

To solve this problem, we can use the formula for the probability of an event, which is the number of favorable outcomes divided by the total number of outcomes.

Let's first find the probability that the article is typed by the first typist. Since the article is equally likely to be typed by either typist, this probability is 1/2.

Now, we need to find the probability that the article has no errors given that it is typed by the first typist. We know that the average number of errors per article typed by the first typist is 3.5, so the probability that an article typed by the first typist has no errors is given by the Poisson distribution with λ = 3.5:

P(X = 0) = e^(-λ) * λ^0 / 0! = e^(-3.5) * 3.5^0 / 1 = e^(-3.5) ≈ 0.0302

Similarly, we can find the probability that the article has no errors given that it is typed by the second typist. This probability is given by the Poisson distribution with λ = 4.1:

P(X = 0) = e^(-λ) * λ^0 / 0! = e^(-4.1) * 4.1^0 / 1 = e^(-4.1) ≈ 0.0164

Finally, we can use the law of total probability to find the probability that the article has no errors:

P(X = 0) = P(X = 0 | typed by first typist) * P(typed by first typist) + P(X = 0 | typed by second typist) * P(typed by second typist)

= 0.0302 * 1/2 + 0.0164 * 1/2

= 0.0233

Know more about probability here:

https://brainly.com/question/30034780

#SPJ11

A statement about the system of equations that is true is: A. in the system of equations, x represents the number of liters of acid in solution A, and y represents the number of liters of acid in solution B.

The expression 0.30y represents: B. the number of liters of acid in solution C that come from solution B.

If the system of equations is graphed in a coordinate plane, the x-coordinate of the intersection of the two lines is 2.5.

The number of liters of solution B the chemist mixes with solution

A to create solution C containing 25% acid is 7.5 liters.

In order to write a system of linear equations to describe this situation, we would assign variables to the number of liters of acid in solution A and the number of liters of acid in solution B respectively, and then translate the word problem into an algebraic equation (linear equations) as follows:

Since the chemist mixed the two solutions to make 10 liters of a third solution, solution C, containing 25% acid, a system of linear equations that models the situation is given by;

x + y = 10

10%x + 30%y = 25% ⇒ 0.10x + 0.3y = 2.5

By solving the system of linear equations simultaneously, we have:

0.10(10 - y) + 0.3y = 2.5

y = 7.5 liters.

x = 10 - y = 10 - 7.5 = 2.5 liters.

Read more on linear equation here: brainly.com/question/25858757

#SPJ1

The value of fraction which is equal to 2/-7 are,

⇒ - 4/14, - 6/21, - 8/28, ..

We know that;

A fraction is a part of whole number, and a way to split up a number into equal parts. Or, A number which is expressed as a quotient is called fraction. It can be written as the form of p : q, which is equivalent to p / q.

Given that;

The fraction is,

⇒ 2/- 7

Now, We can find all the fractions which is equal to 2/-7 as,

⇒ 2/- 7 = - 2/7

           =  - 4/14,

⇒ - 2/7 = - 6/21,

⇒ - 2/7 =  - 8/28,

Thus, the value of fraction which is equal to 2/-7 are,

⇒ - 4/14, - 6/21, - 8/28, ..

Learn more about the fraction visit:

https://brainly.com/question/5454147

#SPJ1

The correct matching of the above items with their descriptions is as follows:

Prescription medical abbreviations are those abbreviations that are used by medical practitioners to direct both the patient and pharmacist the dosage, route of administration and duration for the drug treatment regimen.

The typical examples of medical prescription used by doctors include the following:

BID = twice daily (think bi/bilateral or two, or Bicycle which has 2 wheels)

QID = four times daily (think quad/four or 4 quarters)

TID = three times daily (think tri/three, or tricycle which has 3 wheels)

Q or q = means 'every'

extremity= arm or leg

QOD =every other day

Learn more about drugs here:

https://brainly.com/question/28222512

#SPJ1

The modelled  expression on the number line is -3 ≤  x  ≤ 7

Recall that an inequality is a relationship between two expressions or values that are not equal to each other in mathematics.

A number line is a pictorial representation of numbers on a straight line  It is used to compare numbers that are placed sequentially at equal distances along its length and it can be extended infinitely in any direction and is usually represented horizontally.

The range of numbers is from -3 to +7

Putting this in inequality form we have -3 ≤  x  ≤ 7

This implies that the values of the number on the number line ranges from -3 to a +7

Learn more about a number line on https://brainly.com/question/16191404

#SPJ1