the relationship between the color of the light adsorbed and the color of the light transmitted is easily seen using the transmission color wheel. solutions will display the color opposite on the wheel to the color of the light that is absorbed. if a solution absorbs green light, what color will be observed?

The value of the gravitational potential energy of the two star system is -(GM²/d²), the correct answer is (E)

The gravitational potential energy of the two-star system can be calculated using the formula:

U = -G(m₁m₂/r)

where G is the gravitational constant, m₁ and m₂ are the masses of the stars, and r is the distance between them.

In this case, one star has a mass of 3M and the other has a mass of M. The distance between them is d. We can calculate the position of the center of mass of the system using:

r = (3Md)/(3M + M) = (3/4)d

This means that each star is at a distance of (1/4)d from the center of mass. Using this information, we can calculate the gravitational potential energy of the system as:

U = -G(3MM ÷ (1/4)d) - G(M3M ÷ (1/4)d)

U = -G(12M²/d) - G(9M²/d)

U = -G(21M²/d)

Therefore, the gravitational potential energy of the two-star system is -(GM²/d) multiplied by 21. Thus, the correct answer is option (E), -(GM²/d²).

To learn more about gravitational follow the link:

https://brainly.com/question/3009841

#SPJ4

The complete question is:

Two stars orbit their common center of mass as shown in the diagram below. The masses of the two stars are 3M and M. The distance between the stars is d.

What is the value of the gravitational potential energy of the two star system?

A) -(GM²/d)

B) (3GM²/d)

C) -(GM²/d²)

D) -(3GM²/d)

E) -(GM²/d²)

To find the average power delivered to the train during its acceleration, we need to use the formula:
Power = Work / Time

First, we need to find the work done on the train during its acceleration. We can use the formula:
Work = Force x distance

The force on the train is equal to its mass times its acceleration:
Force = Mass x Acceleration

Using the given values, we get:
Force = 0.875 kg x (0.720 m/s^2) = 0.63 N

The distance the train travels during its acceleration can be found using the formula:
Distance = (1/2) x Acceleration x Time^2

Plugging in the given values, we get:
Distance = (1/2) x 0.720 m/s^2 x (22.0 x 10^-3 s)^2 = 0.17 m

So the work done on the train during its acceleration is:
Work = 0.63 N x 0.17 m = 0.1071 J

Now we can plug this value into the formula for power:
Power = Work / Time

The time given is 22.0 milliseconds, which is 0.0220 seconds:
Power = 0.1071 J / 0.0220 s = 4.87 W

Therefore, the average power delivered to the train during its acceleration is 4.87 watts.

To know more about acceleration :

https://brainly.com/question/29135987

#SPJ11

The density of the cube measured will be 6047 kg/m³. It is determined by the researcher in the lab, may be calculated using the relativistic density equations and the Lorentz factor to be 2.747.

In order to solve this puzzle, you must determine the density of a cube while it travels at 89% the speed of light through a laboratory. The cube weighs 2200 kg/m³ at rest.

We can write a formula

ρ' = γρ

ρ' ⇒ density that measured by experimenter

γ ⇒ Lorentz factor

ρ ⇒ at rest the cube's density

The density of an item changes as its velocity changes, according to special relativity.

Cube is moving at 89.0% of the speed of light means v = 0.890c

c ⇒ Speed of light

Lorentz Factor γ = 1/√(1 - v²/c²) = 1/√(1 - (0.890c)²/c²) = 2.747

Now ρ' = γρ = 2.747 × 2200 kg/m³ = 6047 kg/m^3

This indicates that the cube's high velocity caused the experimenter to perceive it as being denser.

Learn more about density:

https://brainly.com/question/29775886

#SPJ4

In the visible-light view of M82, the source of the white and blue light that dominates the image is mainly due to the presence of young, massive stars. These stars emit high amounts of energy, which results in a strong blue and white glow.

The white and blue light in the visible-light view of M82 is primarily coming from young, hot, massive stars that are forming in the galaxy's intense starburst regions. These stars emit large amounts of ultraviolet radiation, which ionizes the surrounding gas and causes it to glow brightly in visible light. Additionally, some of the blue light may be due to scattered starlight off of dust particles in the galaxy's disk.
The blue light comes from the hot, young stars, while the white light is a combination of light emitted by various types of stars within the galaxy. The high star formation rate in M82 contributes to the abundance of these bright stars and the overall appearance of the galaxy.

To know more about ultraviolet radiation:

https://brainly.com/question/30547511

#SPJ11

The normative statement in this list is b.

The normative statement in this list is b. "You should wear a helmet when cycling." This is because it is expressing a value judgment and prescribing a course of action, rather than simply stating a fact like the other options. The other statements are all descriptive and objective, stating things that are generally true or observable, such as the number of wheels on a bicycle or the color of the sky. The statement about electricity is a scientific principle, but it is still not normative in nature.

Learn more about normative statement

brainly.com/question/15823409

#SPJ11

Increasing the intensity of the light by a factor of 10 would increase the number of photoelectrons produced.

The photoelectric effect is a phenomenon in which electrons are emitted from a material when it absorbs electromagnetic radiation, such as light. The energy of the radiation must be greater than the work function of the material for electrons to be emitted.

Increasing the intensity of the light increases the number of photons striking the surface of the metal, which increases the likelihood of electrons being emitted. Therefore, increasing the intensity of the light by a factor of 10 would result in the emission of photoelectrons.

To learn more about photoelectrons, here

https://brainly.com/question/16772624

#SPJ4

If the trench is dug too deep or if there are low spots in the trench, compacted backfill should be used as fill under the pipe. This helps to provide support and prevent the pipe from settling or becoming damaged over time.

The backfill material should be free from rocks, debris, and other sharp objects that could puncture the pipe, and it should be compacted in layers to ensure a stable foundation.

Additionally, it is important to make sure that the backfill material is properly graded to prevent water from pooling around the pipe and causing erosion or other issues.

To know more about backfill material:

https://brainly.com/question/31079656

#SPJ11

To determine the time a star with a right ascension of 6hr will transit, we can follow these steps:

1. Identify the right ascension of the star currently transiting (8hr) and the time of transit (5am).
2. Determine the difference in right ascension between the two stars (8hr - 6hr = 2hr).
3. Convert the difference in right ascension to a time difference (2hr x 4 minutes/degree x 15 degrees/hour = 120 minutes).
4. Calculate the transit time of the star with a right ascension of 6hr by subtracting the time difference from the given transit time (5am - 120 minutes = 3am).

So, a star with a right ascension of 6hr will transit at 3am.

To know more about right ascension :

https://brainly.com/question/207368

#SPJ11

Before the use of radar, people relied on visual cues such as cloud formations, debris, and the sound of the tornado to know if one had formed.

Prior to the invention and widespread use of radar technology, people had to rely on their senses and observations to determine if a tornado had formed. They would look for signs such as a rotating cloud or a funnel-shaped cloud descending from the sky. Additionally, they would listen for the sound of the tornado, which has been described as a roar or a freight train.

Debris being thrown around in a circular motion is another visual clue that a tornado has formed. While these methods were not as accurate as modern radar technology, they did allow people to identify and take precautions against tornadoes to some degree.

To know more about tornado, here

brainly.com/question/30404827

#SPJ1

Answer:

V = λ * ν       speed of wave in medium

We know the speed of a particular wave in a medium is constant.

ν = V / λ

If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.

ν' = ν / 3

The angle between the plumb line on the train and the plumb line on the ground is approximately 0.02 degrees. The plumb line on the train is deflected towards the east, in the direction of the train's motion.

We need to calculate the angle between the plumb line on the train and the plumb line on the ground.

By using the tangent function

tanθ = (v² ÷ gR)

where,

θ = angle between the plumb line on the train and the plumb line on the ground

v = 150 m/s is velocity of the train

g = 9.81 m/s² is acceleration due to gravity

R = 6,371,000 m isradius of the earth

Plugging in the values, we get:

tanθ = (150₂ ÷ (9.81 × 6,371,000))

tanθ = 0.000346

Taking the inverse tangent of both sides, we get:

θ = tan⁻¹(0.000346)

θ = 0.0199 degrees

θ ≈ 0.02 degrees deflected towards the east, in the direction of the train

To learn more about direction the link:

https://brainly.com/question/30173481

#SPJ4

True. The breaking force refers to the maximum amount of force that a material can withstand before it fractures or breaks.

The highest amount of stress or force that a material can sustain before it fractures or breaks is referred to as the breaking force, also known as the ultimate tensile strength. This is a crucial characteristic of materials that are frequently used to assess their durability and mechanical strength.

The composition, structure, temperature, and loading conditions of the material, among other things, can all have an impact on the breaking force. Higher breaking forces are often regarded as more robust materials, which makes them suited for applications requiring great strength and durability.

Learn more about force:

https://brainly.com/question/30236242

#SPJ4

155-newton box going up a ramp. The gravitational potential energy in the universe totals 279J, which is what causes the box to move from point A to point B when force F is applied.

The formula for gravitational force is P.E. = mgh, whereby g is the force caused by gravity (9.8 m/s2 at the earth's surface) and h is the elevation in metres. The units for gravitational potential energy are kg m2/s2, which are the same as those for kinetic energy.

The amount of gravitational potential energy an object has depends on how high it is above the surface whenever the height is the smallest. Point B in the given diagram is the lowest point and is closest to the Earth's surface vertically.

To know more about  potential energy visit :

https://brainly.com/question/24284560

#SPJ1

The Postage Stamp green at Royal Troon is a challenging par 3 hole known for its small size, steep slopes, and tricky bunkers. It is widely considered one of the most difficult and intimidating holes in golf.

The Postage Stamp green at Royal Troon is a famous par 3 hole that is widely considered to be one of the most challenging and intimidating holes in all of golf. The hole is named for the small size of its green, which measures only 2, 437 square feet in total, making it one of the smallest greens on any golf course in the world.

The green is also characterized by its steep slopes and tricky bunkers, which make it very difficult for golfers to hit and hold their shots. As a result, the Postage Stamp is widely regarded as a true test of a golfer's skill and nerve, and is a favorite among fans of the sport for its exciting and unpredictable play.

Learn more about  Postage Stamp

https://brainly.com/question/30708627

#SPJ4

At 6°C and 3 atm, 3 L of oxygen gas has a total translational kinetic energy of 4.32 10³ J.

A chemical entity's centre of mass moves with energy Ek=12mv2, where m is the chemical entity's mass (molecule, atom, or ion) and v is the centre of mass's velocity.

KE = (3/2) × N × k × T

PV = nRT

n = PV/RT

n = (3 atm) * (3 L) / [(0.08206 L·atm/mol·K) * (279 K)]

n = 0.321 mol

Since each molecule of oxygen has 2 atoms, the total number of oxygen molecules is:

N = 2 * (6.022 × 10²³) * 0.321

N = 3.87 × 10²⁴ molecules

Now we can calculate the kinetic energy:

KE = (3/2) * (3.87 × 10²⁴) * (1.38 × 10²³ J/K) * (279 K)

KE = 4.32 × 10³ J

To know more about kinetic energy visit:-

https://brainly.com/question/26472013

#SPJ1

It is not recommended to keep the AC running while the engine is off, as this can drain the car battery and may lead to mechanical issues in the long run. It is better to turn off the AC and open the windows or step out of the car to cool off while waiting for your husband.

Idling the engine for extended periods of time can also waste gas and contribute to air pollution. When you stop your car's engine, the air conditioning (AC) system will also stop working, as it requires the engine to be running to function properly. To save gas and keep cool while waiting for your husband, you may consider:

1. Turn off your car's engine to save gas.
2. Open the windows slightly to allow for airflow.
3. Use a portable battery-operated fan to keep yourself cool.
4. Park your car in a shaded area, if possible, to reduce heat buildup inside the vehicle.
5. Wear light, breathable clothing to stay comfortable in warmer temperatures.

Remember that running the AC without the engine is not possible, so it's essential to find alternative ways to stay cool while conserving fuel.

More on car engine: https://brainly.com/question/29980491

#SPJ11

The warning that objects seen in the mirror are closer than they appear is due to the fact that convex mirrors produce reduced, virtual images of objects. The image in a convex mirror appears to be closer than it actually is, as light rays are refracted back toward the optical axis and scattered. Also, because the image is smaller than the actual object, it appears to be further away than it actually is. Therefore, it is important to take into account this distortion in the perception of distance when using convex mirrors in vehicles and other devices

The downward force of the atmosphere on the book is equal to the pressure of the atmosphere multiplied by the surface area of the book's cover and it is calculated to be 5 N.

Atmospheric pressure is the pressure exerted by the weight of the Earth's atmosphere on objects on or near the surface of the Earth. It is caused by the gravitational attraction of the Earth on the gases in the atmosphere. The atmospheric pressure varies with altitude, temperature, and weather conditions, and is typically measured in units of pressure such as pascals (Pa) or kilopascals (kPa).

Force = Pressure x Area

Where:

Pressure = 100 kPa (given)

Area = 0.05 m² (given)

Substituting the given values, we get:

Force = 100 kPa x 0.05 m²

Force = 5 N

Therefore, the downward force of the atmosphere on the book is 5 N.

To know more about atmospheric pressure, visit:

https://brainly.com/question/30166820

#SPJ1

The investigator must increase the current by a factor of 5 to keep the magnetic field strength constant when the distance is increased from 1.0 cm to 5.0 cm.

When a current flows through a wire, it produces a magnetic field around it. The strength of this field depends on the current and the distance from the wire. According to the inverse-square law, the magnetic field strength decreases as the distance from the wire increases.

For a long, straight wire carrying a current I, the magnetic field strength at a distance r from it can be calculated as follows:

B = μ0 I ÷ (2πr)

where μ0 is the permeability of free space, which is a constant.

If the magnetic field strength is to remain constant when the distance is increased from 1.0 cm to 5.0 cm, then we can set the two expressions for B equal to each other:

μ0 I ÷ (2πr₁) = μ0 (xI) ÷ (2πr₂)

where x is the factor by which the current must be increased.

Simplifying this expression, we get:

x = r₂ ÷ r₁ = 5.0 cm ÷ 1.0 cm = 5

To learn more about magnetic follow the link:

https://brainly.com/question/3160109

#SPJ4

Thermal expansion is a phenomenon in which materials expand when they are heated and contract when they are cooled. This can be a problem in industrial equipment or piping systems that contain liquids, especially when the liquid is blocked-in and cannot move freely.

When the temperature of the liquid increases due to an external heat source, such as a nearby furnace or the sun, the liquid will expand and cause an increase in pressure within the equipment or piping system. This increase in pressure can lead to overpressure, which can be dangerous and can potentially cause equipment failure or system rupture.

It is important to account for thermal expansion when designing industrial equipment and piping systems to ensure that they can safely withstand the changes in pressure caused by temperature fluctuations.

Learn more about equipment ,

https://brainly.com/question/30230359

#SPJ4

The impulse imparted to the rocket is 45780 N·s (or kg·m/s).

What is Impulse?

Impulse is a concept in physics that refers to the change in momentum of an object when a force acts upon it for a certain amount of time. It is a vector quantity and is calculated as the product of the force applied to an object and the time for which the force is applied.

) Impulse is defined as the product of the force applied to an object and the time for which the force is applied. Mathematically, impulse (J) is given by the equation:

Impulse (J) = Force (F) × Time (t)

Given:

Force (F) = 7400 N

Time (t) = 6.2 s

Plugging in these values, we can calculate the impulse imparted to the rocket:

Impulse (J) = 7400 N × 6.2 s

Impulse (J) = 45780 N·s (or kg·m/s)

Learn more about Impulse from the given link

https://brainly.com/question/229647

#SPJ1

When comparing the spectral lines with the color emitted by gas tubes, we notice that they correspond to each other. This is because the spectral lines represent the specific wavelengths of light that are emitted or absorbed by the atoms in the gas.

We find that the spectral lines and the color emitted by gas tubes are related to one another. This is true because the spectral lines show the precise light wavelengths that the gas's atoms emit or absorb.  

When the gas is excited, the atoms absorb energy and jump to higher energy levels, and then release this energy as light when they return to their original energy levels.

The color of the light emitted by the gas tube corresponds to the specific wavelengths of light that are emitted by the excited atoms, which match the spectral lines.

Therefore, we can use the color emitted by the gas tube to identify the elements present in the gas, as each element has a unique set of spectral lines that correspond to its specific atomic structure.

Learn more about spectral lines:

https://brainly.com/question/29217999

#SPJ11

A tidal wave is a type of wave known as a "tidal bore," also called a "seiche."

Tidal bores occur when the rising tide creates a wall of water that moves up a river or narrow bay against the direction of the river or bay's flow.

This occurs due to the gravitational forces of the Moon and Sun, which cause the ocean's water level to rise and fall in a regular cycle of tides.

As the high tide crests at the mouth of the river or bay, a surge of water propagates upstream and collides with the lower water level.

The interaction between the two bodies of water generates a large, powerful wave that moves upstream.

The height and speed of the tidal bore depend on the shape and depth of the river or bay, as well as the astronomical tide cycle.

Tidal waves can be dangerous, as they can cause damage to boats, structures, and ecosystems along the river or bay.

Some tidal bores can reach heights of up to several meters and travel at speeds of up to 30 km/h (18.6 mph), creating dangerous conditions for those caught in their path.

Despite their destructive potential, tidal bores can also be an attraction for surfers and thrill-seekers who ride the waves on specialized boards or boats.

Tidal bore surfing has become a popular sport in some parts of the world, such as the Qiantang River in China and the Amazon River in Brazil.

To know more about tidal wave visit link :

https://brainly.com/question/12604849

#SPJ11

The harmonic wave is n = (2m - 1), the frequency is 7582 Hz, the wavelength is 4.5 and the wave speed is 336.6 m/s.

In a closed pipe, the wave can only have odd-numbered harmonics, because the closed end of the pipe is a node of the wave. The harmonic number can be determined using the equation:

n = (2m - 1)

where n is the harmonic number and m is an integer.

The wavelength of the wave is given as λ = 0.2 m. The fundamental wavelength is given by the equation:

λ1 = 2L

where L is the length of the pipe. Substituting the value of L, we get:

λ1 = 2(0.45 m) = 0.9 m

The fundamental frequency is given by the equation:

f1 = v / λ1

where v is the speed of the wave. Rearranging the equation, we get:

v = f1 * λ1

The wave speed can also be determined using the equation:

v = f * λ

where f is the frequency of the wave and λ is its wavelength.

Equating the two expressions for v, we get:

f1 * λ1 = f * λ

Solving for the fundamental frequency, we obtain:

f1 = (λ1 / λ) * f = (0.9 m / 0.2 m) * 1683 Hz ≈ 7582 Hz

Therefore, the fundamental frequency of the wave is approximately 7582 Hz.

The harmonic number is given by the equation:

n = (2m - 1)

where m is an integer. To determine the harmonic number, we can rearrange the equation to get:

m = (n + 1) / 2

Substituting the value of λ and λ1, we can solve for n:

λ = λ1 / n

n = λ1 / λ = 0.9 m / 0.2 m = 4.5

Since n must be an integer, the nearest odd integer to 4.5 is 5.

Therefore, the wave is the fifth harmonic.

Finally, we can determine the wave speed using the equation:

v = f * λ = (1683 Hz) * (0.2 m) = 336.6 m/s

Therefore, the wave speed is approximately 336.6 m/s.

Learn more about wave

brainly.com/question/25954805

#SPJ11

Okay, let's think this through step-by-step:

* The rate of energy transfer is 50 J/s

* We need to calculate the energy transferred in 4 seconds

* So we would calculate:

Energy in 4 seconds = Rate x Time

= 50 J/s x 4 s

= 200 J

So the heat energy produced within 4 seconds with an energy transfer rate of 50 J/s is 200 J.

Let me know if you have any other questions!

Tangential acceleration of the rim of the wheel = Change in speed / time = (10 m/s - 0 m/s)/(60 m/ 0.30 m) = 333.33 m/s²

Acceleration is the rate of change of velocity over time. It is a vector quantity, which means it has both magnitude and direction. Acceleration can be caused by a variety of factors, including an external force, a change in mass, or a change in velocity. Acceleration is typically measured in meters per second squared (m/s²). When an object is accelerating, its velocity changes over time.

Rotational acceleration of the wheel = Tangential acceleration / Radius of the wheel = 333.33 m/s² / 0.30 m = 1111.11 rad/s²
Rotational speed of the wheel just after traveling 60 m
= Initial rotational speed + Acceleration x Time
= 0 + 1111.11 rad/s² x (60 m / 0.30 m)
= 37,037.04 rad/s

To learn more about acceleration
https://brainly.com/question/460763
#SPJ1

The response is C. It has bulk and occupies room. All substance has a volume and takes up space, whether it be a solid, liquid, or gas. It is a basic characteristic of matter. While matter can move from hot to cold and perform work.

A metal-skinned hull, steam propulsion, and a main armament of guns equipped to fire explosive shells are the three qualities that define a fighting ironclad. All of these innovations reached their full maturity with the French Navy's November 24, 1859, launch of the "Gloire," but the US Civil War saw the invention of the ironclad.

Any attribute that may be measured, such as a substance's mass, volume, length, density, colour, malleability, or melting point Properties of matter include point, hardness, smell, temperature, and more.

To know more matter visit:-

https://brainly.com/question/14987556

#SPJ1

Answer: D

Explanation:

The value of B depends on the distance z from the center of the ring, and it will increase as z gets closer to the ring.

The magnetic field on the axis of a circular loop carrying a current I can be calculated using the Biot-Savart law, which states that the magnetic field at a point is directly proportional to the current flowing through the loop and inversely proportional to the distance between the point and the loop.

For a circular loop of radius r, the magnetic field on its axis at a distance z from the center can be calculated as:

[tex]$B = \frac{\mu_0 I}{2}\frac{r^2 + z^2}{\sqrt{r^2 + z^2}^3}$[/tex]

where μ₀ is the permeability of free space.

In this case, the current I = 94.0 A and the diameter of the ring is 2.40 mm, which means the radius r of the ring is 1.20 mm = 0.00120 m.

The magnetic field on the axis of the ring at a distance z can be calculated as:

[tex]$B = \frac{\mu_0 I}{2}\frac{r^2 + z^2}{\sqrt{r^2 + z^2}^3}$[/tex]

[tex]$B = \left(4\pi \times 10^{-7} \frac{T \cdot m}{A}\right) \frac{94.0,A}{2}\left(\frac{0.00120,m}{2}^2 + z^2\right)^{-3/2}$[/tex]

[tex]$B = (2\pi \times 10^{-6},\mathrm{T})(0.0003606 + z^2)^{-3/2}$[/tex]

Therefore, the magnetic field on the axis of the ring is given by

[tex]$B = (2\pi \times 10^{-6},\mathrm{T})(0.0003606 + z^2)^{-3/2}$[/tex]

The value of B depends on the distance z from the center of the ring, and it will increase as z gets closer to the ring.

For more such questions on distance , Visit:

https://brainly.com/question/26550516

#SPJ11

The difference in energy between the final and initial rotational kinetic energies is -(2/3) times the initial rotational kinetic energy.

The rotational kinetic energy of an object is given by the formula:

[tex]K_rot = \frac{1}{2} * I * w^{2}[/tex]

where K_rot is the rotational kinetic energy, I am the moment of inertia, and ω is the angular velocity.

If the moment of inertia of an object decreases by a factor of 3, then the rotational kinetic energy will decrease by a factor of 3 as well.

Let K1 be the initial rotational kinetic energy of the object, and K2 be the final rotational kinetic energy of the object. Then, we can write:

K2 = (1/3) * K1

The difference in energy between the final and initial rotational kinetic energies is:

ΔK = K2 - K1

ΔK = (1/3) * K1 - K1

ΔK = [tex]-(2/3)*k1[/tex]

To know more about rotating kinetic energy:

https://brainly.com/question/30107920

#SPJ4