A spacejet travels 800 miles/h .how long does it take to travel 1km
Igneous rock can be changed into which type of rock through the application of heat and pressure?
metamorphic rock
clastic sedimentary rock
non-foliated igneous rock
foliated igneous rock
Answer:
metamorphic rock
Explanation:
Igneous rocks can be changed into metamorphic rocks when heat and pressure are applied to the rock.
Pressure and heat in the presence of a fluid phase cause metamorphic transformation of a prolith.
At the right temperature and pressure, an igneous rock will not form magma but will undergo mineralogical changes to form metamorphic rocks. These changed rocks have different mineral facies that are different from those of the prolith.Through heat and pressure, igneous rocks can be transformed into metamorphic rocks.
Answer:
classic sedimentary rock
Explanation:
If a rock is skipped into a lake at 24 m/s2 with what force as the rock
thrown if it was '1,75 kg?
Answer:
Force = Mass * Acceleration
Explanation:
24*1.74= 42 N
how long does it take a dollar bill that is 6 inches long to drop through its length (hint: Convert the length to meters and use a formula to find the time taken for the dollar to free fall through this length)
Answer:
3.4seconds
Explanation:
if a dollar was times for how long it would fall down to its length it would be 3.4 seconds
What is the magnitude of force required to accelerate a car of mass
1.7 × 103 kilograms by 4.75 meters/second2?
Answer:
The answer is 8075 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × accelerationFrom the question
mass = 1.7 × 10³ kg = 1700 kg
acceleration = 4.75 m/s²
We have
force = 1700 × 4.75
We have the final answer as
8075 NHope this helps you
While Juliet was watching Romeo ran at a speed of 3.3 m/s straight off the end of a diving board
that is 3 m above the water. How long was he airborne before he hit the water?
What do you put in the bowl first? milk or cereal?
Answer:
i put cereal first
Explanation:
cereal
This waterbottle has a mass of .5 kg. If the net force acting on the bottle is five and to the right what is the bottles acceleration (hint: use formula a=f/m
Answer:
a = 10/s^2
Explanation:
Answer:
a=10 m/s *2 right
Explanation:
The net force (0.5 kg) divided by the mass (5 N) = 10
The force moved the object to the right.
So you Would put this in the equation a=___ m/s *2 _____
And you would get a=10m/s*2 right
HOPE YOU LEARNED SOMETHING SO WHEN WE GO BACK TO SCHOOL YOU WILL KNOW WHAT YOU ARE TALKING ABOUT ! : )
What forces cause acceleration?
Answer:
friction, should be correct i think!
At highway speeds, a particular car is capable of an acceleration of about 1.6 m/s?. At this rate,
does it take the car to speed up from 80 km/hr to 110 km/hr? Round your answer to
Two significant figures
Given parameters:
Acceleration of the car = 1.6m/s
Initial speed = 80km/hr
Final speed = 110km/hr
Solution:
Time taken to achieve this speed = ?
Solution:
Acceleration is the rate of change of velocity with the time taken.
Mathematically;
a = [tex]\frac{V - U}{T}[/tex]
where a is the acceleration
V is the final velocity
U is the initial velocity
T is the time taken
Now make the unknown time the subject of the expression;
aT = V - U
T = [tex]\frac{V - U}{a}[/tex]
Convert the given acceleration to km/hr;
1.6m/s = 1.6 x [tex]\frac{m}{s}[/tex] x [tex]\frac{1km}{1000m}[/tex] x [tex]\frac{3600s}{1hr}[/tex] = 5.76km/hr
Input the parameters and solve;
T = [tex]\frac{110 - 80}{5.76}[/tex] = 5.2hrs
The time taken is 5.2hrs
Rashid lifts a flower pot 0.8m off the floor using a constant force of 20 N. How much work is done on the flower pot?
Answer:16 J
Explanation:
Work done = force × displacement
In this case the body has been displaced to a height
An 85 kg construction worker has 37,485J of gravitational potential energy. To the nearest whole number,
worker is _________
mabove the ground
Answer:
45m above the ground
Explanation:
got it right on Edg 2020
Geologists measure the amplitude of seismic waves using the Richter scale. If an earthquake of 7.3 has a greater amplitude than an earthquake of 4.4, which one carries more energy? Explain your answer.
Answer: The 7.3 earthquake carries more energy
Explanation:
Because, it has a higher amplitude
Help me!
What is the net force acting on a 7.85 kg object moving at a constant speed of 15.55 m/s
127) A swimmer heading directly across a river that is 200 m wide reaches the opposite bank in
6 min 40 s. During this swim, she is swept downstream 480 m. What is the speed of the
current?
A) 0.50 m/s
B) 0.80 m/s
C) 1.2 m/s
D) 1.4 m/s
E) 1.8 m/s
Answer:
C
Explanation:
I took a picture of my problem.
when a light bulb is turned on electrical energy is transformed into two other types of energy. What are they and support your answer
Answer:
In the case of an electric bulb, the electrical energy is converted to light and heat. The amount of electrical energy put into a bulb = the amount of light energy (desirable form) plus the heat energy that comes out of the bulb (undesirable form).
Explanation:
sana nakatulong)):
HEY CAN ANYONE PLS ANSWER DIS!!!!!!
Answer:
Explanation:
1.wrap bar magnet in a plastic baggie and remove the iron filings from the mixture by using a bar magnet. Place a small piece of scrap paper on the scale and “tare” the scale. Then place filings on the scrap paper and record (e) the mass of the iron filings. Don't throw out the iron–save it to be recollected.
2.When sand is added to water it either hangs in the water or forms a layer at the bottom of the container. Sand therefore does not dissolve in water and is insoluble. It is easy to separate sand and water by filtering the mixture. Salt can be separated from a solution through evaporation.
3.Sand (mostly silicon dioxide) is not.
Pour the salt and sand mixture into a pan.
Add water. ...
Heat the water until the salt dissolves. ...
Remove the pan from heat and allow it to cool until it's safe to handle.
Pour the salt water into a separate container.
Now collect the sand.
Pour the salt water back into the empty pan.
Heat the salt water until the water boils. Continue boiling it until the water is gone and you're left with the salt.
Another way you can separate the salt water and sand is to stir up the sand/salt water and pour it through a coffee filter to capture the sand.
Answer:
1. Separating iron from mixture
Provided a magnetmoved the magnet close to the mixtureseparated the magneted iron from the magnet.2. Separating sand from mixture
poured the mixture in a separation funnelfiltered off the sand from the mixture.3. Separating Salt mixture
boild the mixturecontinued heating to drynessthe remimants left behind is the saltAncient gold coins have been found in Greece and Italy. What property allows for gold to be stamped into coins?
Answer: malleability
Explanation:
How much work is done to move a 1,000 N car 20 meters?
Answer:
The answer is 20,000 JExplanation:
The work done by an object can be found by using the formula
workdone = force × distanceFrom the question
force = 1,000 N
distance = 20 m
We have
workdone = 1000 × 20
We have the final answer as
20,000 JHope this helps you
what element has 3 protons and 4 electrons?
Answer:
Li⁻
Explanation:
# of protons = # element on the Periodic Table.
# of protons (+) + # of electrons (-) = overall charge
3 protons is the 3rd element on the Periodic Table: Lithium
All elements on the Periodic Table have a neutral charge. Lithium neutral has 3 protons and 3 electrons.
We are given 4 electrons; 3 + -4 = -1 charge overall.
Therefore, our ion is Li⁻
1) Calculate the speed of a runner who runs 100 m in 20s
This is how you calculate his speed, for the 100metres. That is, the average speed for the entire distance, including the start from intertia until the race end where the athlete is decelerating. Multiply the time by 10, and divide 3600 by that figure. i.e. 10 by10 equals 100. Divide 3600 by 100 and you get 36 which is the speed figure you requested.
A female athlete ran 200 metres a few years ago and in the middle section of the race covered 100 metres in that race in a time under 10 seconds. That is, she ran a sub 10second 100metres from a flying start. This great athlete from Slovenia, also ran a 100 metre race (from a stationary start) in a time under 11 seconds, when she was 48 years of age. Her name is Merlene Ottey.
A soccer player runs 80 yards down the field and then 30 yards back toward her
original starting point. This takes 55 seconds total. What is the average velocity of
the soccer player?
0.50 yd/s
0.91 yd/s
1.10 yd/s
2.00 yd/s
Melanie and Lance gathered data about the effectiveness of masks
preventing disease. One of the questions they ask the experimental
subjects is their age. What type of observation is this? *
Consider a spring that does not obey Hooke's law very faithfully. One end of the spring is fixed. To keep the spring stretched or compressed an amount x, a force along the x-axis with x-component Fx=kx−bx2+cx3 must be applied to the free end. Here k=100N/m, b=700N/m2, and c=12000N/m3. Note that x>0 when the spring is stretched and x<0 when it is compressed.
Answer:
The work done will be 0.115 J.
Explanation:
Given that,
[tex]k=100\ N/m[/tex]
[tex]b=700\ N/m^2[/tex]
[tex]c=12000\ N/m^3[/tex]
A force along the x-axis with x-component,
[tex]F(x)=kx-bx^2+cx^3[/tex]
Suppose, How much work must be done to stretch this spring by 0.050 m from its unstretched length?
We need to calculate the work done
Using formula of work done
[tex]W(x)=\int{F(x)dx}[/tex]
Put the value into the formula
[tex]W(x)=\int{(kx-bx^2+cx^3)dx}[/tex]
[tex]W(x)=\dfrac{kx^2}{2}-\dfrac{bx^3}{3}+\dfrac{cx^4}{4}[/tex]
Put the value of k,b,c and x
[tex]W(0.050)=\dfrac{100\times(0.050)^2}{2}-\dfrac{700\times(0.050)^3}{3}+\dfrac{12000\times(0.050)^4}{4}[/tex]
[tex]W(0.050)=0.115\ J[/tex]
Hence, The work done will be 0.115 J.
The value of spring displacement is greater than zero. Therefore, spring is stretched.
Force in spring :
It is given as, [tex]F=kx[/tex]
Where k is constant and x is amount of displacement.
The force function is given that,
[tex]F(x)=kx-bx^{2}+cx^{3}[/tex]
Here given that, [tex]k=100N/m, b=700N/m^{2} , c=12000N/m^{3} .[/tex]
Substitute all values in above equation,
[tex]F(x)=100x-700x^{2} +12000x^{3}[/tex]
To check, the spring is stretched or it is compressed.
Substitute f(x) = 0
We get x is greater than zero.
Thus, The value of spring displacement is greater than zero. Therefore, spring is stretched.
Learn more about the spring force here:
https://brainly.com/question/14970750
Please this question
Answer:
1. 7
2. Mass
3. (b) Distance
4. (b) Force
5. (a) ML⁻¹T⁻²
6. (c) M⁻¹LT²
7. (c) M⁻¹L³T⁻²
8. (c) Pressure
9. (c) Young's modulus
10. (b) zero
11. (c) Infinite
12. (d) 1:4
13. (b) 0.6 J
14. (c) 45 N
15. (a) 0.4 cc
16. (a) 176.7 °F
17. (a) 10°C
18. (c) 50 K
19. b. H
Explanation:
15. Whereby the compressibility = 4 × 10⁻⁵ Pa⁻¹
The compression ratio for 100 Pa = 4 × 10⁻⁵ × 100 = 4 × 10⁻³
The Change for 100 cc = 4 × 10⁻³ × 100 cc = 0.4cc
The question is 6 please help
Answer:
none of the answers are correct
Explanation:
Lithium = 3
Berillium = 4
Boron = 5
Carbon = 6
Which statement describes an endothermic reaction? A. Energy is released by the reaction. B. Energy is absorbed by the reaction. C. No energy is transfered by the reaction. D. Energy is created in the reaction.
Answer:It's B energy is absorbed by the reaction,hope this helps
Explanation:
Any reaction in which energy is absorbed is said to be endothermic. Hence, option B is correct, but the rest are not correct.
What is an Endothermic Reaction?In every chemical process, energy is involved. When new bonds form in products, energy is produced. Reactant bonds are broken using energy. Exothermic reactions are those that produce more energy when new bonds form in the products than is needed to break existing bonds in the reactants.
In contrast, endothermic reactions are the opposite. Endothermic reactions release more energy when new bonds form in the products than is required to break bonds in the reactants.
During the reaction, a large amount of energy is absorbed.
To get more information about Endothermic Reaction :
https://brainly.com/question/23184814
#SPJ5
Which answer choice
describes all nonmetals?
A. Hydrogen and all of the elements in blue boxes
B. All of the elements of Period 2 in green boxes
O C. All of the elements of Group 18 in orange boxes
D. Hydrogen and all of the other elements in orange boxes
Hydrogen and all of the other elements in orange boxes are non metals and is denoted as option D.
What is a Non metal?These are elements which lack metallic properties and usually have low thermal and electrical conductivity.
In the periodic table, they are represented by orange together with hydrogen hence the reason why it is the most appropriate choice.
Read more about Non metal here https://brainly.com/question/23938148
#SPJ1
What is the pH of 0.001 M HNO3?
Answer:
i think its 2.0
Explanation:
hopefully i am right ...