The table shows a proportional relationship.
X1 23
y 16 32 48
Write an equation that represents the proportional relationship.

(A) qualitative and quantitative categories. (A) True. (C) is highly susceptible when used outside tested range of X values.

Data is broken into (A) qualitative and quantitative categories, which refers to the nature of the data being analyzed. Qualitative data is non-numeric and describes characteristics or attributes, while quantitative data is numeric and describes quantities or measurements.

The statistical calculation r shows the correlation between variables (Y, X) in a regression analysis. This statement is true. The correlation coefficient r is a measure of the strength and direction of the linear relationship between two variables. It ranges from -1 to 1, where -1 indicates a perfect negative correlation, 0 indicates no correlation, and 1 indicates a perfect positive correlation.

Linear regression used for estimation of A is susceptible when used outside the tested range of X values. This statement is true. Linear regression models are based on the assumption of a linear relationship between the dependent variable Y and the independent variable X within a certain range of X values. When used outside of this range, the linear regression model may not accurately predict the values of Y. This is because the linear relationship between Y and X may not hold outside of the tested range, or other factors may come into play that were not accounted for in the model. Therefore, it is important to carefully consider the range of X values used in the regression analysis and to exercise caution when making predictions outside of this range.

Learn more about correlation at: brainly.com/question/31588111

#SPJ11

Answer:

5

Step-by-step explanation:

you see here you go to red and green and their you see it.. I might be right

Answer:

Step-by-step explanation:

[tex]4(x^{2} +10x + 16)\\4(x+2)(x+8)[/tex]

The trigonometric identity:

sin(x/2) = -√(1/12) , cos(x/2) = √(11/12), and tan(x/2) = -36/55.

Since sec(x) = 6/5 and x is in the fourth quadrant (270° < x < 360°), we can draw a reference triangle in the fourth quadrant, where the adjacent side is positive and the hypotenuse is 5 and the opposite side is -6.

Then we can use the half-angle formulas to find sin(x/2), cos(x/2), and tan(x/2):

sin(x/2) = ±√((1 - cos(x))/2)

cos(x/2) = ±√((1 + cos(x))/2)

tan(x/2) = sin(x)/(1 + cos(x))

Since x is in the fourth quadrant, sin(x) is negative and cos(x) is positive, so we take the negative square roots in both of the half-angle formulas to get the appropriate signs for sine and cosine:

sin(x/2) = -√((1 - cos(x))/2)

cos(x/2) = √((1 + cos(x))/2)

First, we need to find cos(x) from the given information. Since sec(x) = 6/5, we know that cos(x) = 5/6.

Then, we can substitute this value into the half-angle formulas to get:

sin(x/2) = -√((1 - 5/6)/2) = -√(1/12)

cos(x/2) = √((1 + 5/6)/2) = √(11/12)

Finally, we can use the half-angle formula for tangent to get:

tan(x/2) = sin(x)/(1 + cos(x)) = (-6/5)/(1 + 5/6) = -36/55.

Therefore, sin(x/2) = -√(1/12) , cos(x/2) = √(11/12), and tan(x/2) = -36/55.

To learn more about trigonometric identities;

https://brainly.com/question/24377281

#SPJ1

The true statement about the box plot is the one in option C;

The interquartile range is 3 and the range is 8.

Here we have a box plot, we can see that the graph goes from 1 to 9 (in the horizontal axis).

Such that:

The range is the difference between the larger and the smaller value, so here we have:

Range = 9 - 1 = 8

The interquartile range is the same, but now we only look at the values in the rectangles, the largest value is 6 and the smallest is 3:

interquartile range = 6 - 3 = 3

Then the correctoption is C.

Learn more about box plots at:

https://brainly.com/question/14277132

#SPJ1

Answer:

a

Step-by-step explanation:

The area of the remaining poster board is given as follows:

240 square inches.

To obtain the area of a rectangle, you need to multiply its length by its width. The formula for the area of a rectangle is:

Area = Length x Width

The dimensions for the entire board are of 29 inches and 10 inches, hence:

A = 29 x 10

A = 290 square inches.

The removed part is of four right triangles of sides of 5 inches, hence:

Ar = 4 x 1/2 x 5 x 5

Ar = 50 square inches.

Hence the remaining area is given as follows:

290 - 50 = 240 square inches.

More can be learned about the area of a rectangle at brainly.com/question/25292087

#SPJ1

The median is the middle value of a set of numbers. To find the median of the sample values provided, we need to first arrange the numbers in order from least to greatest: 3, 7, 11, 18, 24, 27, 32, 35, 41, 46.

Next, we need to determine the middle value or the average of the two middle values, if there is an even number of values in the set.

In this case, we have 10 values in the set, so we need to find the average of the fifth and sixth values: (24 + 27) / 2 = 25.5. Therefore, the median of the sample values is 25.5.

The median is an important measure of central tendency in statistics because it is less sensitive to outliers or extreme values than the mean. It is often used in conjunction with the mean to provide a more complete understanding of a dataset. The sample values provided are relatively close together, so the difference between the median and the mean (if calculated) would likely be small.

Learn more about median here:

https://brainly.com/question/28060453

#SPJ11

1) The polygons are not similar.

2) They polygons are similar.

3)  They polygons are similar.

Two polygons are similar if they have the same shape but different sizes. The corresponding angles are equal and the ratios of their corresponding sides are also equal.

Using the above concept, we can equate the ratio of the corresponding sides to see if the polygons are similar. That is:

No. 1

10/5 = 2

12/6 = 2

8/4.5 = 1.77

The ratios of the corresponding sides are equal. Thus, they are not similar.

No. 2

24/12 = 2

13.2/6.6 = 2

The ratios of the corresponding sides are equal. Thus, they are similar.

No. 3

22/5.5 = 4

26/6.5 = 4

12/3 = 4

The ratios of the corresponding sides are equal. Thus, they are similar.

Learn more about similar polygons on:

brainly.com/question/29492809

#SPJ1

The only possibility is that both sides have lengths less than 13cm. In other words, a and b can be any two positive numbers such that a + b > 13.

However, the exact values of a and b cannot be determined without additional information or constraints.

To determine the possible lengths of the other two sides of the triangle, we can use the triangle inequality theorem.

According to the theorem, in a triangle, the sum of the lengths of any two sides must be greater than the length of the remaining side.

Let's denote the known side length as 13cm and the lengths of the other two sides as a and b.

We can analyze the possibilities:

If the lengths of the other two sides are both less than 13cm, then a + b < 13.

However, since a and b must be greater than 0, it is not possible for their sum to be less than 13.

If one side is greater than or equal to 13cm, then a + b > 13.

In this case, the sum of the other two sides would be greater than the known side, violating the triangle inequality theorem.

For similar question on possibility.

https://brainly.com/question/26460726

#SPJ11

The explanatory variable, also known as the independent variable, is the factor that is being manipulated to observe its effects on the outcome.

A variable used in statistical analysis to explain or forecast the outcome of a dependent variable is referred to as an explanatory variable. It is also known as an independent variable or predictor. It stands for an element or circumstance that could affect the dependent variable. Explanatory variables assist researchers comprehend the causes or drivers behind a specific occurrence by providing information about the link between various components. Researchers can examine the effects of modifying or detecting changes in the explanatory variables on the dependent variable. By enabling the discovery of patterns, trends, and correlations, this study offers insightful information regarding the variables that influence the observed results. Explanatory factors are important in many disciplines, including the social sciences, economics, psychology, and medical research.

In this study, the researcher is interested in determining the relationship between the amount of time spent studying and the score on a statistics exam. The explanatory variable, also known as the independent variable, is the factor that is being manipulated to observe its effects on the outcome. In this case, the explanatory variable is the "amount of time spent studying" for the exam.

Learn more about explanatory variable here:

https://brainly.com/question/29699531

#SPJ11

Rectangle TUVY is dilated by a scale factor of 1/2 to form rectangle T’U’V’Y’.  The measure of side W’T’ is 15 units.

If rectangle TUVY is dilated by a scale factor of 1/2 to form rectangle T’U’V’Y’, the lengths of the corresponding sides are also scaled down by the same factor.

Given that side WT measures 30 units, we need to find the measure of side W’T’.

Since the scale factor is 1/2, we can calculate the length of W’T’ as follows:

W’T’ = (1/2) * WT

Substituting the given value:

W’T’ = (1/2) * 30

W’T’ = 15

Therefore, the measure of side W’T’ is 15 units.

For more such questions on scale factor , Visit:

https://brainly.com/question/25722260

#SPJ11

The first partial derivative of f(x,y) with respect to x is:

∂f/∂x = a(bx - ad) + c(cx + dy)

The first partial derivative of f(x,y) with respect to y is:

∂f/∂y = b(cx + dy) + c(cx + dy)

The probability of drawing a red marble followed by a blue marble from a bag containing 4 red, 3 yellow, and 7 blue marbles can be calculated using the formula for conditional probability. Finally, we multiply these two probabilities together to get the joint probability of drawing a red marble followed by a blue marble, which is 14/91 or approximately 0.1538.

The probability of drawing a red marble on the first draw is 4/14 (or simplifying, 2/7) since there are 4 red marbles out of 14 total marbles in the bag. After the first marble is drawn, there are now 13 marbles left in the bag, with 7 of them being blue. Therefore, the probability of drawing a blue marble on the second draw given that a red marble was drawn on the first draw is 7/13. Multiplying these probabilities together gives us the joint probability of drawing a red marble followed by a blue marble: (2/7) * (7/13) = 14/91 or approximately 0.1538.

To learn more about  conditional probability : brainly.com/question/10567654

#SPJ11

The monthly rate of increase was about 2.06 percent.

If participation in the program increased exponentially by 25 percent, this means that the number of participants in the program at the end of the year was 1.25 times the number of participants at the beginning of the year.

To find the monthly rate of increase, we can use the formula for exponential growth:

N = N0 x e^(rt)

where N is the final number of participants, N0 is the initial number of participants, e is the mathematical constant approximately equal to 2.71828, r is the monthly rate of increase (expressed as a decimal), and t is the time in months.

If we assume that the program started at the beginning of the year and ended at the end of the year, then t = 12 (12 months in a year). We also know that N = 1.25N0 (25% increase).

Substituting these values into the formula, we get:

1.25N0 = N0 x e^(r x 12)

Simplifying, we get:

1.25 = e^(12r)

Taking the natural logarithm of both sides, we get:

ln(1.25) = 12r

Solving for r, we get:

r = ln(1.25)/12

r ≈ 0.0206

Therefore, the monthly rate of increase, expressed as a percent, is

approximately:

r x 100% ≈ 2.06%

So the monthly rate of increase was about 2.06 percent.

for such more question on rate of increase

https://brainly.com/question/23377525

#SPJ11

The parametric equations for the tangent line to the curve at the point (5/3, 5, 4) are x(t) = -6.708t + 14.036, y(t) = 3.536t + 1.932, and z(t) = -8.986t + 12.97.

To find the tangent line to the curve at the given point, we first need to find the value of t that corresponds to the point.

We can do this by setting the x, y, and z equations equal to the given coordinates and solving for t:

10 cos(t) = 5/3

10 sin(t) = 5

8 cos(2t) = 4

Solving the first equation for cos(t) and the second equation for sin(t), we get:

cos(t) = 1/6

sin(t) = 1/2

Using the identity cos^2(t) + sin^2(t) = 1, we can find the value of cos(2t):

cos^2(t) + sin^2(t) = 1

cos^2(t) + (1-cos^2(t)) = 1

2cos^2(t) = 1

cos(2t) = 2cos^2(t) - 1 = -11/18

So the value of t that corresponds to the point (5/3, 5, 4) is t = arctan(2) ≈ 1.107.

Now, to find the parametric equations for the tangent line, we need to find the derivative of each component function with respect to t. We have:

x'(t) = -10 sin(t)

y'(t) = 10 cos(t)

z'(t) = -16 sin(2t)

Evaluating these at t = arctan(2), we get:

x'(arctan(2)) = -10 sin(arctan(2)) ≈ -6.708

y'(arctan(2)) = 10 cos(arctan(2)) ≈ 3.536

z'(arctan(2)) = -16 sin(2arctan(2)) ≈ -8.986

So the parametric equations for the tangent line are:

x(t) = 5/3 - 6.708(t - arctan(2))

y(t) = 5 + 3.536(t - arctan(2))

z(t) = 4 - 8.986(t - arctan(2))

Simplifying, we get:

x(t) = -6.708t + 14.036

y(t) = 3.536t + 1.932

z(t) = -8.986t + 12.97

Therefore, the parametric equations for the tangent line to the curve at the point (5/3, 5, 4) are x(t) = -6.708t + 14.036, y(t) = 3.536t + 1.932, and z(t) = -8.986t + 12.97.

To know more about derivative click here

brainly.com/question/29096174

#SPJ11

The closest range of volumes of the three sample is 30 (1st option)

To know which value is closest to the volume of the sample, we shall determine the volume of the sample. Details below:

From the question given above, we obtained the following:

We shall assume the sample to be at standard temperature and pressure (STP). Thus, we have:

1 mole of gas sample = 22.4 Liters

Therefore,

1.4 mole of gas sample = (1.4 mole × 22.4 Liters) / 1 mole

1.4 mole of gas sample = 31.36 liters

Thus, the volume of the sample is 31.36 liters. Considering the options given from the question, the closest to the volume is 30 (1st option)

Learn more about volume:

https://brainly.com/question/225322

#SPJ1

The correct option is D i.e. the average cost of performance per customer is $ 29.5

Consider the provided information.

E(X) = [tex]\sum X_i[/tex] × [tex]P(X_i)[/tex]

Where The total number of tickets a customer purchases is [tex]X_i[/tex] .

And [tex]P(X_i)[/tex] is the relative frequency distribution.

E(X) = 1 × 0.20 + 2 × 0.45 + 3 × 0.10 + 4 × 0.20 + 5 × 0.05

E(X) = 0.20 + 0.90 + 0.30 + 0.80 + 0.25

E(X) = 2.45

The average cost of performance per customer is,

2.45 × 12 = $ 29.5

Therefore, the average cost of performance per customer is $ 29.5

Hence, the correct option is D) $29.4

Learn more about Mean here

https://brainly.com/question/31101410

#SPJ4

Given question is incomplete, the complete question is below

The number of tickets purchased by a customer for a musical performance at a certain concert hall can be considered a random variable. The table below shows the relative frequency distribution for the number of tickets purchased by a customer. Number of tickets purchased Relative frequency 0.20 0.45 0.10 0.20 0.05 Suppose each ticket for a certain musical performance cost $12. Based on the distribution shown, what is mean cost per customer for the performance? (A) $2.45 1 ) $2.75 (C) $24.50 (D) $29.40 (E) $36.00

a. residual is much larger than the rest of the residual values.

In regression analysis, an outlier refers to an observation that significantly deviates from the expected pattern or trend of the data. Specifically, it is an observation whose residual (the difference between the observed value and the predicted value) is much larger than the residuals of the other observations.

Outliers can have a considerable impact on the regression model, affecting the estimated coefficients and overall model fit. It is important to identify and assess outliers to determine if they are influential or if they should be treated or removed to ensure the reliability and validity of the regression analysis.

To learn more about regression click here:

brainly.com/question/31809136

#SPJ11

The predicted value of y is 436.6 when x1 equals 15 and x2 equals 33 in this multiple regression model.

To predict y using the given sample regression equation, you need to plug in the given values of x1 and x2 into the equation and then solve for y.

1. Write down the sample regression equation: yˆ = 157 + 12.7x1 - 2.7x2
To predict y when x1 equals 15 and x2 equals 33, we plug those values into the sample regression equation:
yˆ = 157 + 12.7(15) + 2.7(33)
yˆ = 157 + 190.5 + 89.1
yˆ = 436.6
2. Substitute the given values of x1 (15) and x2 (33) into the equation:

yˆ = 157 + 12.7(15) - 2.7(33)

3. Calculate the values within the parentheses:

yˆ = 157 + 190.5 - 89.1

4. Perform the addition and subtraction:

yˆ = 436.6

So, when x1 equals 15 and x2 equals 33, the predicted value of y (rounded to one decimal place) is 258.4.

Learn more about Regression:

brainly.com/question/31735997

#SPJ11

The best way to display this data would be in a contingency table or a cross-tabulation table.

What is the frequency?

The number of periods or cycles per second is called frequency. The SI unit for frequency is the hertz (Hz). One hertz is the same as one cycle per second.

The birth order would be shown in one column with three categories (oldest, in-between, youngest), and the IQ test scores would be shown in another column with different categories or ranges of scores.

The table would show the frequency or percentage of individuals in each cell of the table, which would help to determine if there is a relationship between birth order and IQ scores.

A graphical display, such as a stacked bar chart or a mosaic plot, could also be used to visualize the relationship.

Hence, The best way to display this data would be in a contingency table or a cross-tabulation table.

To know more about frequency visit:

https://brainly.com/question/5102661

#SPJ4

The correct answer is 1. I and II only. Interest rates to decrease. when the Federal Reserve increases the money supply, it can lead to a decrease in interest rates and an increase in consumption and investment.

When the Federal Reserve increases the money supply, it injects more money into the economy. This can lead to a decrease in interest rates, as there is more money available for borrowing and lending. This is because an increase in the money supply can lead to a decrease in the demand for money, which in turn causes the interest rates to fall.

A decrease in interest rates can lead to an increase in consumption and investment. Lower interest rates make it cheaper for consumers to borrow money to buy goods and services, and for businesses to borrow money to invest in new projects. As a result, an increase in the money supply can lead to an increase in consumption and investment, as businesses and consumers have more money available to spend.

However, an increase in the money supply can also lead to inflation. This is because more money is chasing the same amount of goods and services, leading to an increase in prices. Inflation can erode the purchasing power of money and lead to a decrease in the standard of living.

In conclusion, when the Federal Reserve increases the money supply, it can lead to a decrease in interest rates and an increase in consumption and investment. However, it can also lead to inflation, which can have negative effects on the economy. Therefore, the correct answer is 1. I and II only.

Learn more about Interest rates here

https://brainly.com/question/29802908

#SPJ11

The steps involved are;

The steps involved in constructing 30 degrees include;

Learn more about construction at: https://brainly.com/question/25795065

#SPJ1

Complete question:

What are the steps involved in construction of 30 degrees

True. When performing econometric analysis on time-series data, it is a best practice to sort the data in chronological order. Econometric analysis involves using statistical methods to study and understand economic relationships, trends, and patterns.

Time-series data refers to a set of observations collected at regular intervals over time, such as stock prices, GDP growth, or unemployment rates.

Sorting the data in chronological order is essential because it allows for a proper understanding of the temporal relationship between different data points. This ordering helps researchers identify patterns, trends, and potential causal relationships within the data. Additionally, many econometric models, such as autoregressive or moving average models, rely on the assumption that the data points are arranged sequentially in time.

In summary, when conducting econometric analysis on time-series data, it is crucial to sort the data in chronological order to accurately analyze patterns, trends, and relationships. This practice enables researchers to develop robust models that can be used for forecasting and understanding the underlying economic processes.

Learn more about econometric analysis here:

https://brainly.com/question/30367130

#SPJ11

The perimeter of triangle ABC is approximately 24.53 units.

To find the perimeter of triangle ABC, we need to know the lengths of all three sides. We can use the given information about the angles and side lengths to solve for the missing side lengths using trigonometry.

Let's start with the side opposite the 29-degree angle, which we'll call side AB. We can use the sine function to find the length of AB:

sin(29) = opposite/hypotenuse

opposite = sin(29) x 10

opposite ≈ 4.83

So, side AB has a length of approximately 4.83 units.

Next, let's move on to the side opposite the 61-degree angle, which we'll call side AC. We can use the same process:

sin(61) = opposite/hypotenuse

opposite = sin(61) x 10

opposite ≈ 8.66

So, side AC has a length of approximately 8.66 units.

Finally, we know that one of the angles in the triangle is 90 degrees, so the third angle must be:

180 - 90 - 29 = 61 degrees

This means that side BC is the hypotenuse of a right triangle with one leg of length 4.83 and the other leg of length 8.66. We can use the Pythagorean theorem to find the length of BC:

BC² = AB² + AC²

BC² = 4.83² + 8.66²

BC² ≈ 94.08

BC ≈ 9.7

So, side BC has a length of approximately 9.7 units.

Now that we have the lengths of all three sides, we can find the perimeter of triangle ABC:

Perimeter = AB + BC + AC

Perimeter = 4.83 + 9.7 + 10

Perimeter ≈ 24.53

To learn more about the Pythagoras theorem;

https://brainly.com/question/343682

#SPJ1

To apply the divergence theorem, we need to compute the divergence of the vector field (x,y,z)=〈x,y,3z〉. The flux of out the top of S is 0.

We have:

div = ∂∂x(x) + ∂∂y(y) + ∂∂z(3z) = 1 + 1 + 3 = 5.

Now, let's apply the divergence theorem to compute the flux of ⃗ through the closed surface S that bounds the solid W:

∫∫S · dS = ∭W div(⃗) dV

Since the solid W is bounded by the paraboloid z=x^2+y^2 and the plane z=4, we can set up the limits of integration as follows:

0 ≤ z ≤ 4

0 ≤ r ≤ √(4-z)

0 ≤ θ ≤ 2π

where r and θ are the cylindrical coordinates in the xy-plane.

Then, we have:

∭W div(⃗) dV = ∫₀⁴ ∫₀^(√(4-z)) ∫₀^(2π) 5r dz dr dθ

= 2π ∫₀⁴ ∫₀^(√(4-z)) 5r dz dr

= 2π ∫₀⁴ 5(4-z) dz

= 2π [5(4z - z^2/2)]|₀⁴

= 40π.

Therefore, the flux of through the closed surface S is 40π.

To find the flux of out the bottom of S (the truncated paraboloid), we can use the same limits of integration, but set z = 0:

∫∫S_bottom · dS = ∭W_bottom div dV

= ∫₀² ∫₀^(√(4-z)) ∫₀^(2π) 5r dz dr dθ

= 2π ∫₀² 5(4-z) dz

= 30π.

Therefore, the flux of ⃗ out the bottom of S is 30π.

To find the flux of  out the top of S (the disk), we can set z = 4:

∫∫S_top · dS = ∭W_top div dV

= ∫₀^(2π) ∫₀^√4 ∫₄^4 5z r dz dr dθ

= 0.

Since the vector field is perpendicular to the top of S (the disk), the flux through it is zero.

Therefore, the flux of out the top of S is 0.

Learn more about vector at: brainly.com/question/29740341

#SPJ11

We can compute the power of a hypothesis test for different sample sizes by calculating b(0.21) for the alternative value p = 0.21.

For the alternative value p = 0.21, we can compute the power of a hypothesis test by calculating the probability of rejecting the null hypothesis when the true population proportion is actually 0.21. Here, we are interested in computing b(0.21) for different sample sizes, specifically n = 100, 2500, 10,000, 40,000, and 90,000.

The power of a hypothesis test increases as the sample size increases. For a fixed level of significance, a larger sample size allows us to detect smaller differences between the null hypothesis and the true population parameter. When the sample size is small, it may be difficult to detect a difference between the null and alternative hypotheses. However, as the sample size increases, the power of the test increases, and we become more confident in our ability to detect a significant result.

In summary, we can compute the power of a hypothesis test for different sample sizes by calculating b(0.21) for the alternative value p = 0.21. As the sample size increases, the power of the test also increases, allowing us to detect smaller differences between the null and alternative hypotheses. This highlights the importance of having a sufficiently large sample size to ensure the power of the test is high enough to detect meaningful differences.

Learn more about Hypothesis:

brainly.com/question/31319397

#SPJ11

Suppose we are testing the null hypothesis H0: µ = 62 against the alternative hypothesis H1: µ ≠ 62, where σ is unknown and n = 14.

We are given that the data comes from a normal population and that our test statistic value is -2.483.

To find the p-value, we need to determine the probability of obtaining a test statistic value as extreme or more extreme than our observed value of -2.483, assuming that the null hypothesis is true. Since the population standard deviation is unknown, we must use the t-distribution to find the p-value.

The t-distribution is similar to the standard normal distribution, but accounts for the uncertainty in the population standard deviation by using the sample standard deviation instead.

Using a t-distribution table or calculator with df = n - 1 = 13, we find that the two-tailed p-value for our test statistic is approximately 0.027. This means that the probability of obtaining a test statistic as extreme or more extreme than -2.483, assuming that the null hypothesis is true, is 0.027.

The smallest level of significance at which we would reject H0 is any value less than 0.027. This means that if we choose a significance level α less than 0.027, we would reject the null hypothesis and conclude that there is evidence to support the alternative hypothesis.

However, if we choose a significance level greater than or equal to 0.027, we would fail to reject the null hypothesis and conclude that there is not enough evidence to support the alternative hypothesis.

learn more about hypothesis here: brainly.com/question/30899146

#SPJ11

The equation that shows the given relationship is:

105*0.3 = x

We want to write an equation that shows the relationship.

30% of 105 is x.

First, remember that if we take a percentage X of a number N, the expression is:

N*(X/100%).

In this case we are taking the 30% of 105, then the expression is:

105*(30%/100%)

105*0.3

And that must be equal to x, then the equation that we want is:

105*0.3 = x

Learn more about percentages at:

https://brainly.com/question/843074

#SPJ1

To shift the summation index so that the general term of the given power series involves x^k, we can substitute k = n - 3 in the second series.

Let's first consider the first series:

sum_n=1^infinity nC_nx^n+3

We can write the general term of this series as:

a_n = nC_n * x^(n+3)

Now, let's look at the second series:

sum_k=4^infinity x^k

We can write the general term of this series as:

b_k = x^k

We want to shift the index of the second series so that the general term involves x^k. We can do this by substituting k = n - 3. This gives us:

sum_n=1^infinity b_n = sum_n=1^infinity x^(n-3)

Now, we can substitute this into the first series to get the desired result:

sum_n=1^infinity nC_nx^n+3 = sum_n=1^infinity nC_n * b_n = sum_n=1^infinity nC_n * x^(n-3)

Therefore, we have successfully shifted the summation index so that the general term of the given power series involves x^k.

Learn more about summation here:

brainly.com/question/29079489

#SPJ11