the time it takes to cover the distance between two cities by car varies inversely with the speed of the car. the trip takes hours for a car moving at . how long does the trip take for a car moving at ?

The histogram shows that the majority of velvetleaf plants produced between 0 and 500 seeds. The highest count was 2,000 seeds, and the lowest count was 0 seeds. On average, velvetleaf plants produce around 500 seeds.

We can use the formula for inverse variation, which states that the product of the time and the speed is constant:

time × speed = constant

Let's use t to represent the time needed to travel the distance at 54 miles per hour. We know that the time is 10 hours when the speed is 24 miles per hour. So we can set up the equation:

10 × 24 = t × 54

Simplifying, we get:

240 = 54t

Dividing both sides by 54, we get:

t = 240/54

Simplifying this fraction, we get:

t = 40/9

So it will take approximately 4.44 hours, or 4 hours and 26 minutes, to travel the same distance at 54 miles per hour.

the fraction that rounds to 5 is option B, 5 1/2.

What is a fraction?

If the numerator is bigger, it is referred to as an improper fraction and can also be expressed as a mixed number, which is a whole-number quotient with a proper-fraction remainder.

Any fraction can be expressed in decimal form by dividing it by its denominator. One or more digits may continue to repeat indefinitely or the result may come to a stop at some point.

To round a fraction to 5, we need to find the fraction that is closest to 5. Therefore, we need to look at the fractional parts of each option and find which one is closest to 1/2.

A. 5 2/3 = 17/3, which is closer to 6 than to 5.

B. 5 1/2 = 11/2, which is exactly halfway between 5 and 6, so it rounds to 5.

C. 5 9/20 = 259/20, which is closer to 6 than to 5.

D. 4 9/20 = 209/50, which is closer to 4 than to 5.

Therefore, the fraction that rounds to 5 is option B, 5 1/2.

Learn more about Fraction, by the following link.

https://brainly.com/question/17220365

#SPJ9

Answer:

Step-by-step explanation:

domain is -infinity to positive infinity range is -3 to infinity. Increasing from -3 to infinity and decreasing from - infinity to -3 and it’s minimum

The combined amount in both accounts after 10 years is $16,869.58

To solve the problem, we need to use the following formulas:

Simple Interest = Principal x Rate x Time

Compound Interest = [tex]Principal * (1 + Rate/ n)^{n * Time}[/tex]

where:

Principal = the initial deposit

Rate = the interest rate (in decimal form)

Time = the number of years

n = the number of times interest is compounded per year

For Account 1:

Simple Interest = Principal x Rate x Time

= $6000 x 0.035 x 10

= $2100

The amount in Account 1 after 10 years will be the initial deposit plus the interest earned:

= $6000 + $2100

= $8100

For Account 2:

Since the interest is compounded annually, n = 1.

Compound Interest = [tex]Principal * (1 + Rate/ n)^{n * Time}[/tex]

= [tex]6000 *(1 + 0.035/1)^{1 * 10}\\= $6000 (1.035)^{10}\\= $8769.58[/tex]

After ten years, the amount in Account 2 will be $8769.58.

After ten years, the combined amount in both accounts will be:

$8100 minus $8769.58 equals $16869.58, resulting in a total of $16,869.58 in both accounts after ten years.

know more about simple interest visit:

https://brainly.com/question/25845758

#SPJ1

The total length of all 10 ribbons is 35 inches when they are placed end to end.

Inches are a unit of length in the imperial system of measurement, which is primarily used in the United States, the United Kingdom, and some other countries. One inch is equal to 1/12 of a foot or 2.54 centimeters.

The inch is commonly used to measure the length or distance of small objects, such as the size of a computer screen, the length of a pencil, or the height of a person. Inches are also used to measure the dimensions of larger objects, such as the width of a door or the size of a piece of furniture.

If John has 10 ribbons, each measuring 3 ½ inches long, we can find the total length of all the ribbons by multiplying the length of one ribbon by the number of ribbons:

Total length = 10 × 3 ½ inches

To multiply a whole number and a mixed number, we can first convert the mixed number to an improper fraction, then multiply:

Total length = 10 × (7/2) inches

Total length = 35 inches

Therefore, the 10 ribbons, placed end to end, would be 35 inches long.

To know more about the measurement visit:

https://brainly.com/question/4725561

#SPJ1

Answer:

$525

Step-by-step explanation:

Jackie starts with $500, and the interest rate is 5% per year.

This means that, after one year, Jackie will have accumulated 5% interest with the $500 she put into the savings account.

Now, we can find 5% of $500 by converting 5% to its fraction form, which is 5/100. 5% of a value means that you need to multiply the fraction (or decimal) by the said value. So, we have:

[tex]\frac{5}{100}[/tex] · 500 =

[tex]\frac{2500}{100}[/tex] =

25

Therefore, the amount of interest she has accumulated in one year is $25. Combined with the money in her savings account, she has $525, since $500 + $25 = $525.

The domain of the function 8 - [tex](x-3)^{2}[/tex] is R which is all the real numbers.

What is domain of a function?

The set or grouping of all potential values that may be used in the function is known as the domain.

We are given a function as 8 - [tex](x-3)^{2}[/tex].

Now, in order to find the domain, we need to find the values where the function is not defined for a value of x.

But, there is no such value for x where the function is not defined.

This means that all values of x give an output.

So, the domain is the set of all the real numbers.

Hence, the domain of the given function is R.

Learn more about domain of function from the given link:

https://brainly.com/question/1369616

#SPJ1

The missing angles in the given pair of lines AB and CD with transversals EF & GH intersecting at O & missing sides on the basis of similarity of triangles are:

∠IKF=w°=109°

JO=z=2.7 units

∠JLO=x°=39°

∠DLO=y°=141°

What is similarity?

If two forms or figures have an equal number of comparable sides and angles, they are said to be similar. Similar figures are those when two or more figures share the same shape but have varied sizes.

Given that

∠KIO=39°

∠IKO=71°

∠IOK=70°

IO=12 units

KO=8 units

LO=4 units

a)We know that ∠KIO=∠OLJ  {alternate interior angles}

∠KIO=∠OLJ=39°

∴x° = 39°

b)We know that ∠OLJ+∠OLD=180° {linear pair}

x°+y°=180°

39°+y°=180°

y°=180-39

y°=141°

c)We know that ∠IKO+∠IKF=180° {angles on straight line}

71°+w°=180°

w°=180-71

w°=109°

d)In ΔOKI and ΔOJL, we can see that

∠OIK=∠OLJ=39°

∠OKI=∠OJL=71°

∠KOI=∠JOL=70°

as the angles are congruent, we can say that ΔOKI and ΔOJL are similar.

∴Sides will be in same ratio

[tex]\frac{OI}{OL}[/tex]  = [tex]\frac{OK}{OJ}[/tex]  = [tex]\frac{KI}{JL}[/tex]

Taking [tex]\frac{OI}{OL}[/tex]  = [tex]\frac{OK}{OJ}[/tex]

[tex]\frac{12}{4} = \frac{8}{z}[/tex]

3z = 8

z =2.667

z≈2.7 units

To know more about similarity, visit:

https://brainly.com/question/26451866

#SPJ1

The Buckley family would pay $51 either way if they rented the truck for 4 additional days.

To solve the question :

Total cost for Kendall's Moving :

= $27 + $6x,

where

x = Number of additional days rented.

Total cost for Newton Rent-a-Truck :

= $7 + $11x

To find the number of additional days we will put both the equations i.e., $27 + $6x and $7 + $11x, equal to each other.

= $27 + $6x = $7 + $11x

Subtracting $7 from both sides :

= $20 + $6x = $11x

Subtracting $6x from both sides :

= $20 = $5x

Dividing both sides by $5 :

= x = 4

Hence, the number of additional days is 4.

So,

Kendall's Moving and Newton Rent-a-Truck would be the same if the truck is rented for 4 additional days by the Buckley family :

Putting the values of x in the equations :

Total cost for Kendall's Moving :

= $27 + $6x,

= $27 + $6(4)

= $51

Total cost for Newton Rent-a-Truck

$7 + $11x

= $7 + $11(4)

= $51

Hence, the Buckley family would pay $51 either way if they rented the truck for 4 additional days.

To know more about, linear equations, visit :

https://brainly.com/question/29111179

After performing long division on (x3+3x2-x+2)/(x-1) we get x² + 4x +3 leaving a remainder of 5.

Long division refers to the method of performing a division of two numbers or polynomials by hand. Furthermore, it involves several steps to evaluate in order to find a quotient and a remainder. It is considered an important and crucial form of practice in the branch of mathematics.                  

In the subject of dividing a polynomial, first, we divide the highest degree term of the dividend by the highest degree term of the divisor, and the remaining result is subtracted from the dividend. The calculation is as follows in the picture

To learn more about long division,

https://brainly.com/question/30059812

#SPJ4

Answer:

m = 6

Step-by-step explanation:

We have the proportion:

12/m = 18/9

To solve for m, we can cross-multiply the terms in the proportion:

12 × 9 = 18 × m

Simplifying both sides of the equation, we get:

108 = 18m

Dividing both sides by 18, we get:m = 6

Therefore, the solution to the proportion 12/m = 18/9 is m = 6.

Answer: m = 6

Step-by-step explanation:

First, we will rewrite this proportion:

     [tex]\displaystyle \frac{12}{m} =\frac{18}{9}[/tex]

Next, we will cross-multiply:

     12 * 9 = 18 * m

     108 = 18m

Lastly, we will divide both sides of the equation by 18:

     m = 6

We can also solve this proportion another way.

     We know that 18/9 = 2, so 12/m must equal 2 as well.

     12/6 = 2, so m = 6.

Positive divisors does n2 have are 5.

If an integer n has exactly three positive divisors, including 1 and n, it means that n is a perfect square of a prime number.

The reason for this is that a prime number has only two divisors: 1 and itself. Therefore, if n has exactly three positive divisors, n must be a perfect square of a prime number, since the only divisors of a perfect square are the divisors of its square root, and its square root must be a prime number.

Let's say that n is equal to p², where p is a prime number. The positive divisors of n are 1, p, and n (which is p²).

Now, to find the number of positive divisors of n², we can use the fact that any positive divisor of n² can be expressed in the form [tex]p^k[/tex], where 0 ≤ k ≤ 4 (since n² = p⁴).

Therefore, the positive divisors of n² are:

1, p, p², p³, and p⁴ (which is n²)

So, n² has 5 positive divisors: 1, p, p², p³, and n².

Hence, the answer is 5.

Learn more about positive divisors.

brainly.com/question/30207836

#SPJ11

The main topic is the split-half reliability test used in psychological research to assess the internal consistency of a scale.

In psychological research, reliability is a crucial aspect of measuring constructs or attributes. One commonly used method for assessing the reliability of a scale is the split-half reliability test.

In this test, the scale questions are divided into two parts equally, and the resulting scores of both parts are correlated against one another.

For example, if a scale had 20 items, the items could be randomly split into two groups of 10 items each.

Scores are then calculated for each group, and the scores are correlated with each other to determine the degree of consistency between the two halves.

The correlation coefficient obtained from this analysis provides an estimate of the internal consistency of the scale.

A high correlation coefficient indicates a high level of internal consistency, indicating that the two halves of the scale are measuring the same construct or attribute.

Conversely, a low correlation coefficient suggests that the two halves of the scale are not measuring the same construct or attribute, and the scale may need to be revised or abandoned.

Overall, the split-half reliability test provides a quick and efficient method for evaluating the reliability of a scale.

However, it is important to note that this method does have some limitations, such as the possibility of unequal difficulty or discrimination of the items in each half of the scale.

Therefore, researchers often use other methods, such as Cronbach's alpha, in conjunction with the split-half reliability test to provide a more comprehensive assessment of the reliability of a scale

Learn more about reliability test

brainly.com/question/27873337

#SPJ11

The surface area of the actual ramp, including the underside, is approximately 15.38 yd².

What is triangle?

A triangle is a three-sided polygon with three angles. It is a fundamental geometric shape and is often used in geometry and trigonometry.

To find the surface area of the actual ramp, we need to first find the dimensions of the ramp.

We are given that the scale model of the ramp is a right triangular prism with legs of 8 in, 5 in, and 5 in, and a height of 3 in. We can use these dimensions to find the dimensions of the actual ramp.

Since the ramp is a scale model, the ratio of the dimensions of the model to the actual ramp is the same for all corresponding dimensions. The height of the triangular base in the actual ramp is given as 0.6 yards, which is equal to 21.6 inches. So, we have:

height of actual ramp / height of model = 21.6 in / 3 in = 7.2

We can use this ratio to find the dimensions of the actual ramp:

height of actual ramp = 7.2 * 3 in = 21.6 in

length of actual ramp = 7.2 * 8 in = 57.6 in

width of actual ramp = 7.2 * 5 in = 36 in

Now we can find the surface area of the actual ramp. The surface area of the top and bottom of the ramp is the area of the triangular base plus the area of the rectangle formed by the length and width of the ramp:

Area of triangular base = (1/2) * base * height = (1/2) * 5 in * 5 in = 12.5 in²

Area of rectangular top and bottom = length * width = 57.6 in * 36 in = 2073.6 in²

Total surface area of top and bottom = 2 * (Area of triangular base + Area of rectangular top and bottom) = 2 * (12.5 in² + 2073.6 in²) = 4153.2 in²

The surface area of the sides of the ramp is the area of the three rectangles formed by the height and width of the ramp:

Area of one side rectangle = height * width = 21.6 in * 36 in = 777.6 in²

Total surface area of sides = 3 * Area of one side rectangle = 3 * 777.6 in² = 2332.8 in²

Finally, we add the surface area of the top and bottom to the surface area of the sides to get the total surface area of the ramp:

Total surface area of ramp = Surface area of top and bottom + Surface area of sides = 4153.2 in² + 2332.8 in² = 6486 in²

Converting to yards and rounding to two decimal places, we get:

Total surface area of ramp = 6486 in² / (36 in/yd)² = 15.38 yd² (rounded to two decimal places)

Therefore, the surface area of the actual ramp, including the underside, is approximately 15.38 yd².

To learn more about triangle from the given link:

https://brainly.com/question/2773823

#SPJ1

In the given problem, the surface area of the triangular prism is 65 square centimeters. The answer is not listed among the options provided

We need to find the surface area of the triangular prism, which is the sum of the areas of all its faces.

The triangular faces of the prism are congruent triangles, so we can find their area by multiplying the base and height and dividing by 2. The dimensions of the triangular faces are 5 cm (base) and 4 cm (height).

Area of each triangular face = (5 cm x 4 cm)/2 = 10 cm²

The rectangular faces are congruent rectangles, so we can find their area by multiplying the length and width. The dimensions of the rectangular faces are 5 cm x 3 cm and 3 cm x 4 cm.

Area of each rectangular face = (5 cm x 3 cm) = 15 cm²

Total surface area of the prism = 2 x Area of triangular face + 3 x Area of rectangular face

= 2 x 10 cm² + 3 x 15 cm²

= 20 cm² + 45 cm²

= 65 cm²

Therefore, the surface area of the triangular prism is 65 square centimeters. The answer is not listed among the options provided, so there might be a mistake in the question or answer choices.

Learn more about prism here: https://brainly.com/question/1297098

#SPJ1

Answer:

  48

Step-by-step explanation:

You want to know the number of cans 4 inches tall with a volume of 50.24 in³ that will fit on a shelf with a height and depth of 10 inches and a length of 50 inches.

The diameter of the can will be found from the volume formula:

  V = (π/4)d²h

  d = √(4V/(πh)) = √(4·50.24/(4·3.14)) = √16 = 4 . . . inches

The cans are 4 inches in diameter.

The number of cans that will fit in each dimension will be the integer part of the dimension divided by the size of the can in that dimension.

  Height: (10 in)/(4 in/can) = 2.5 cans . . . . cans will fit 2 cans high

  Depth: (10 in)/(4 in/can) = 2.5 cans . . . . cans will fit 2 cans deep

  Length: (50 in/4 in/can) = 12.5 cans . . . . cans will fit 12 cans long

A total of 2 × 2 × 12 = 48 cans will fit on the shelf.

__

Additional comment

There will be 2 inches of empty space in each direction.

<95141404393>

a) Positive correlation, b) No correlation, c) Negative correlation

a) Positive correlation - as the hours of lacrosse practice increase, the number of goals scored in a lacrosse game is likely to increase as well.

b) No correlation - there is no obvious relationship between a student's average marks and the number of siblings in their family.

c) Negative correlation - as the distance from a student's home to their school increases, the time they spend on the school bus each day is likely to decrease.

Learn more about correlation at https://brainly.com/question/13879362

#SPJ1

The value of x in the Intersecting chords is 15

From the question, we have the following parameters that can be used in our computation:

Intersecting chords

The value of x is then calculated as

x = 1/2(30 - 2x + 30)

So, we have

2x = 30 - 2x + 30

Evaluate the like terms

4x = 60

Divide

x = 15

Hence, the value of x is 15

Read more about angles at

https://brainly.com/question/28293784

#SPJ1

Answer:

b

Step-by-step explanation:

in order to find the mean you have find the sum of the numbers and divide them by the amount of numbers.without 68 the sum is 310 divide it by 5 and tge answer is 62.however if you add 68 the sum is 378 divide it by 6 and the answer is 63.

therefore the answer increased by 1.

hope this helps :)

Answer: The distance formula between two points (x1, y1) and (x2, y2) is:

d = sqrt((x2 - x1)^2 + (y2 - y1)^2)

Using this formula, we can find the distance between (7, -2) and (-1, -1):

d = sqrt((-1 - 7)^2 + (-1 - (-2))^2)

= sqrt((-8)^2 + (1)^2)

= sqrt(64 + 1)

= sqrt(65)

Therefore, the distance between (7, -2) and (-1, -1) is sqrt(65), or approximately 8.06 units.

Step-by-step explanation:

The two null hypothesis that are correct answer are two-sample t-test and one-sample t-test.

Among the group of answer choices provided, the tests that require calculating degrees of freedom are the two-sample t-test and the one-sample t-test. Both of these tests belong to the t-test family and involve using degrees of freedom to determine the critical t-value.

In summary:
- Null hypothesis: The assumption that there is no significant difference between the sample and population or between two samples.
- T-test: A statistical test used to determine if there is a significant difference between the means of two groups or between a sample and population mean.
- Degrees of freedom: A value used in statistical tests that represents the number of independent values in a data set, which can affect the outcome of the test.

So answer is: two-sample t-test and one-sample t-test.

Learn more about null hypothesis here:

https://brainly.com/question/28920252

#SPJ11

The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-

sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also

requires degrees of freedom, but it is not a test for a null hypothesis.

The correct answer is: all of the above.

All these tests require calculating degrees of freedom:

1. Two-sample t-test:

Degrees of freedom are calculated using the formula (n1 + n2) - 2, where n1 and n2 are the sample sizes of the two

groups being compared.
2. Chi-squared test:

Degrees of freedom are calculated using the formula (rows - 1) * (columns - 1), where rows and columns represent the

number of categories in the data.
3. One-sample t-test:

Degrees of freedom are calculated using the formula n - 1, where n is the sample size.

The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-

sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also

requires degrees of freedom, but it is not a test for a null hypothesis.

for such more question on null hypothesis

https://brainly.com/question/4436370

#SPJ11

The given expression in the form ax + b will be (B) 1.8x + 4.1.

A finite collection of symbols that are properly created in line with context-dependent criteria is referred to as an expression, sometimes known as a mathematical expression.

An example is the expression x + y, which combines the terms x and y with an addition operator.

In mathematics, there are two different types of expressions: algebraic expressions, which also include variables, and numerical expressions, which solely comprise numbers.

So, we have the expression:

(3.6x-1.4) - (1.8x-5.5)

First, solve it in the form of ax + b as follows:

(3.6x-1.4) - (1.8x-5.5)

3.6x-1.4 - 1.8x+5.5

1.8x + 4.1

So, we have the expression: 1.8x + 4.1

Then, the coefficient and content will be (B) and the correct expression would be 1.8x + 4.1.

Therefore, the given expression in the form ax + b will be (B) 1.8x + 4.1.

Know more about expressions here:

https://brainly.com/question/1859113

#SPJ1

Some possible prices for the socks that would meet this condition are $2.99, $2.50, $3.00, $2.95, etc.

A rate is a measure of the amount of change of one quantity with respect to another quantity. It expresses how much one quantity changes in relation to another quantity over a given time or distance.

If Diego has budgeted $35 for 5 pairs of socks and a pair of shorts, we can subtract the cost of the shorts from the total budget to find the amount he has left for the socks:

$35 - $19.95 = $15.05

To find the possible prices for the socks, we can divide the amount Diego has left by the number of pairs of socks he needs:

$15.05 / 5 pairs = $3.01 per pair

Therefore, Diego would be able to stay within his budget if he finds socks that cost $3.01 or less per pair. Some possible prices for the socks that would meet this condition are $2.99, $2.50, $3.00, $2.95, etc.

To know more about pair, visit:

https://brainly.com/question/29122030

#SPJ1

The inverse of (x-A)^c = B, where A = 2x + 1, is x = -(B^(1/c) + 1).

To find the inverse of the expression in (x - A)^c = B, where A = 2x + 1, we can use the following steps:

First, solve for x in terms of A

x = (A - 1) / 2

Substitute the expression for A into the original equation

(x - (2x + 1))^c = B

Simplify

(-x - 1)^c = B

Take the c-th root of both sides

-x - 1 = B^(1/c)

Solve for x

x = -(B^(1/c) + 1)

Therefore, the inverse of the expression in (x - A)^c = B, where A = 2x + 1, is given by

x = -(B^(1/c) + 1)

To know more about inverse of the expression:

https://brainly.com/question/12080785

#SPJ4

--The given question is incomplete, the complete question is given

" Inverse of this in (x-A)^c = (B)

—-

where A = 2X+1 "--

Answer: 1/3

Step-by-step explanation:

1/3x1/3x1/3=1/27

The two triangles are congruent based on the ASA Congruence Postulate.

The ASA Congruence Postulate states that if two angles and the included side of one triangle are congruent to two angles and the included side of another triangle, then the two triangles are congruent.

The image shown above shows two triangles that has three pairs of congruent triangles and a pair of corresponding congruent sides.

Therefore, both triangles are congruent by the ASA Congruence Postulate.

Learn more about the ASA on:

https://brainly.com/question/2398724

#SPJ1

The number of poetry books at the library that are for children is 510

from the question, we have the following parameters that can be used in our computation:

Books = 600

If 8.5/10 of the poetry books are for children, we can calculate the number of poetry books for children as follows:

Number of poetry books for children = (8.5/10) x 600

Number of poetry books for children = 510

Therefore, there are 510 poetry books at the library for children.

Read more about proportion at

https://brainly.com/question/870035

#SPJ1