The titration of an impure sample of KHP found that 36.00 ml of 0.100 m NaOH was required to react completely with 0.758 g of sample. the percentage % of KHP in this sample is 96.9 %.
The equation for the reaction is :
KHP + NaOH -----> KNaP + H₂O
number of moles of NaOH = volume in L × molarity
= 0.0360 × 0.100
= 0.0036 mol
moles of KHP = moles of NaOH = 0.0036 mol
mass of KHP = molar mass × moles
= 204.2 × 0.0036
= 0.735 g
percentage of purity KHP =( mass of pure KHP / mass of impure ) × 100 %
= (0.735 / 0.758 ) × 100 %
= 96.9 %
Thus, The titration of an impure sample of KHP found that 36.00 ml of 0.100 m NaOH was required to react completely with 0.758 g of sample. the percentage % of KHP in this sample is 96.9 %.
To learn more about percentage purity here
https://brainly.com/question/17836636
#SPJ4
what mass of potassium nitrate can be produced from the reaction of 30.00ml of 0.10m nitric acid with 15.00ml of 0.25m potassium carbonate?
0.28986 M mass of potassium nitrate can be produced from the reaction of 30.00ml of 0.10m nitric acid with 15.00ml of 0.25m potassium carbonate
V₁S₁ = V₂S₂ ( V₁ is the volume of acid ,S₁ is the strength of acid, V₂ is the volume of base , S₂ is the strength of base)
So, S1= V2S2 /V1
Putting the values ;
S1= V2S2 /V1
=> S1 = (32.58×0.08897)/10.00
=> S1 = 0.28986
concentration of solution of phosphoric acid = 0.28986 M
One or more chemicals, sometimes referred to as reactants, are changed into one or more new substances, referred to as products, during a chemical reaction. Chemical elements and compounds are both substances. reacting in action, procedure, or example. opposition to a movement, power, or effect The transformation of one or more chemicals into one or more other compounds is known as a chemical reaction. Examples include how rust is created when iron and oxygen combine. Making sodium acetate, carbon dioxide, and water from vinegar and baking soda. Exploding or burning items
Learn more about reaction here:
https://brainly.com/question/28984750
#SPJ4
a dilution was prepared by transferring 5.00 ml of a 0.100 m stock solution to a 50-ml volumetric flask and filling the flask with di water. what is the molarity of the dilution?
The molarity of the dilution is 0.01 M.
Parameter
Volume of first solution = V₁ = 5.00 mLMolarity of first solution = M₁ = 0.100 MVolume of second solution = V₂ = 50 mLWhen we fill the flask with the first solution and water until its full, we make a dilution.
The concentration changed when we added water, but the number of moles stay the same.
[tex]M = \frac{n}{V}[/tex]
M = molarity (Molar)n = number of moleV = volumen₁=n₂
V₁×M₁ = V₂×M₂
5.00×0,100=50×M₂
0.500=50×M₂
[tex]M_2 = \frac{0.500}{50}[/tex]
M₂ = 0,01 M
Learn more about Diluted molarity here: https://brainly.com/question/24709069
#SPJ4
What kind of light is absorbed by greenhouse gases like CO2 to cause warming of the atmosphere?
The kind of light absorbed by greenhouse gases that causes the warming of the atmosphere is infrared light.
What is global warming?Global warming refers to the increase in the average global temperature as a result of an increased amount of absorbed infrared light by greenhouse gases.
Greenhouse gases are gases that form a blanket layer in the atmosphere and prevent reflected low-energy infrared light from the sun from returning back to space. By absorbing this light, greenhouse gases are able to keep the earth warm.
However, as the concentration of greenhouse gases keeps increasing in the atmosphere, so is the amount of infrared light absorbed. Consequently, the atmosphere keeps getting warmer. The more the concentration of the gases increases, the more the temperature.
This is what is currently causing global warming.
More on global warming can be found here: https://brainly.com/question/12908180
#SPJ1
this reaction makes potassium superoxide useful in a self-contained breathing apparatus. how much o2 could be produced from 2.45 g of ko2 and 4.48 g of co2?
Chemical reaction - 0.823 grams O2 could be produced from 2.45 g of ko2 and 4.48 g of CO_2
What is Chemical reaction?
Chemical reactions happen absolutely everywhere. While we sometimes associate chemical reactions with the sterile environment of test tubes and laboratories, nothing is farther from the truth. In fact, a vast number of transformations are creating a dizzying and almost incomprehensible series of new matter and energy changes in our world every second of every day. In nature, chemical reactions can be much more difficult to control and in some cases much more complex than in the laboratory, and generally occur whether you want it or not!In the woods A raging fire, the slow rusting process of iron over the years in the presence of oxygen and water, or the delicate ripening of fruit on a tree, the transformation of various chemicals, etc... (reactants ) into another group of substances (products) is a so-called chemical reaction.
Moles KO2 = 2.44g/(71.1g/mole) = 0.034 moles
Moles CO2 = 4.45g/(44g/mole) = 0.10 moles
4KO2 + 2CO2 —> 2K2CO3 + 3O2
The reaction requires twice as many moles of KO2 than moles of CO2. That means 0.10 mole of CO2 would consume 0.20 moles of KO2. But we only have 0.034 moles of KO2, so the limiting reagent is KO2.
There are 3 moles of O2 produced for every 2 moles of CO2 consumed. In this case we'll assume all of the KO2 reacts, so that should result in (3/4) * (0.034moles) = 0.025 moles of O2 .
To get the mass, 0.025 mole * (32g/mole) = 0.823 grams O2
To learn more about Chemical reaction , click the link below ;
https://brainly.com/question/11231920
#SPJ4
What is the volume of a nugget of gold that has a mass of 93,300g?
Answer:
4834.20 ml or 4.8342 L
Explanation:
Gold has density of 19.30 g/ml
so according to d = m/V
V = m/d = 93,300/19.30 = 4834.19689119 = 4834.20 ml or 4.8342 L
The volume of nuggets of gold that has a mass of 93,300g is 4834.20 ml or 4.8342 L.
What is volume?Volume is the space occupied by a three-dimensional object.
Density is the mass per unit volume. Density is a scalar quantity. It is denoted by d and the symbol for density is given as rho, a Greek symbol. Density is calculated as mass divided by volume.
Density is directly proportional to mass and inversely proportional to volume. Thus, with an increase in density, mass increases and volume decreases, and vice-versa
Gold has a density of 19.30 g/ml
so according to density = mass/ volume
V = m/d = 93,300 / 19.30 = 4834.19
4834.20 ml or 4.8342 L
Therefore, the volume of nuggets of gold that has a mass of 93,300g is 4834.20 ml or 4.8342 L.
To learn more about volume, refer to the link:
https://brainly.com/question/13338592
#SPJ2
Replace this sample text with the prompt or directions for this item.
The atomic number of an element is the number of
The atomic mass is the number of
The electrons in the outermost shell are known as the
protons protons and neutrons
valence electrons
Answer:
1. Protons
2. Protons and Neutrons
3. Valence electrons
Explanation:
what is the percent by mass (m/m%) of ethanol (c2h6o) solution that was prepared by dissolving 50.500 g of ethanol into water to a final volume of 750.0 ml? assume the solution has a density of 1.20 g/ml.
The (m/m%) concentration of ethanol is the solution is 5.55%.
The density of the solution is given to be 1.20 g/ml. The volume of the solution is 750 ml.
We know,
Density = mass/volume
Mass of solution = Density of solution x Volume of solution
Mass of solution = 1.2 x 750
Mass of solution = 900 grams.
The mass of solute, ethanol is 50 grams.
So, (m/m%) of ethanol is,
(m/m%) of ethanol = Mass of ethanol/mass of solution x 100
(m/m%) of ethanol = 50/900 x 100
(m/m%) of ethanol = 5.55%.
So, the (m/m%) of ethanol is 5.55%.
To know more about (m/m%) concentration, visit,
https://brainly.com/question/26255204
#SPJ4
Which element has the ground state electronic configuration, 1s22s22p63s23p64s1 ?.
The given electronic configuration is of Potassium.
The electron configuration in atomic physics and quantum chemistry refers to the arrangement of electrons in orbitals around an atomic nucleus or the distribution of electrons within an atom or molecule.
One orbital can house a maximum of two electrons, and there are four different types of orbitals (s, p, d, and f). More electrons can be held in the p, d, and f orbitals since they contain various sub levels.
Thus, the given atomic configuration is 1s²,2s²,2p⁶,3s²,3p⁶4s¹.
by counting the number of electrons present in orbitals we can find out the atomic number of the atom because ,
no of electrons present = atomic number
thus, no of electrons = 2+2+6+2+6+1=19
the element with atomic number 19 is potassium.
thus, the given electronic configuration is of potassium.
To know more about electron configuration visit the link:
https://brainly.com/question/14283892?referrer=searchResults
#SPJ4
which of the following minerals participates in antioxidant reactions? multiple choice question. phosphorus potassium calcium selenium
According to the given statement potassium minerals participates in antioxidant reactions.
What role do antioxidants play in redox reactions?Redox control of signaling pathways is important in defining the expression of genes and cells in response to peroxidation because natural antioxidants play a vital role in lowering ROS/RNS levels.
How do antioxidants inhibit oxidation?By neutralizing free radicals, complexing prooxidative ions, quenching molecular oxygen and phototherapy, and inactivating lipoxygenase, antioxidants prevent food from oxidizing. An antioxidant is a substance that has the power to prevent another molecule from oxidizing; in other words, an antioxidant is a limiting reagent stable enough to give an atom to a free radical in motion, neutralizing it.
To know more about Antioxidant reactions visit:
https://brainly.com/question/14547660
#SPJ4
Chemical compound responsible for ocean acidification in the open oceans of the world.
Answer:
The chemical compound responsible for ocean acidification in the open oceans of the world is carbon(II) oxide
The chemical compound responsible for ocean acidification in the open oceans of the world is carbon(II) oxide.
What is ocean acidification?Ocean acidification is the global decrease in seawater pH caused by the oceans' extensive uptake of atmospheric carbon dioxide (CO2) in the atmosphere. Ocean acidification is primarily caused by the Earth's atmosphere being overburdened with massive amounts of CO2, which is created by automobiles, industrial processes, and agricultural activities.
A third to a half of the CO2 produced into the atmosphere by human activity since the start of the Industrial Revolution, or around 1750, is being absorbed by the oceans. Scientists believe that at that time, seawater's average pH decreased between 8.19 to 8.05, representing a 30% increase in acidity. The chemical compound responsible for ocean acidification in the open oceans of the world is carbon(II) oxide.
Therefore, the chemical compound responsible for ocean acidification in the open oceans of the world is carbon(II) oxide.
To know more about ocean acidification, here:
https://brainly.com/question/15611772
#SPJ1
When sample X'is passed through a filter paper a
white residue, Y, remains on the paper and a clear
liquid, Z, passes through. When liquid Z is
vaporized, another white residue remains. Sample
X is best classified as
Sample X is best classified as a heterogeneous mixture
Homogenous mixture has the same uniform composition and appearance through out the reaction and it is difficult to separate the substrates present in it.
A heterogeneous mixture contains of visibly different phases or substances. Here separating the mixture becomes easy.
In the given question When sample X is passed through the filter paper we see that a white residue is remaining which is Y. This itself suggests that the the mixture is heterogeneous mixture.
As we initially got the residue it suggests that the solution is a homogenous mixture as we can now differentiate two substances
To know more about heterogenous mixtures
https://brainly.com/question/24898889
#SPJ1
how to check if the rain is acidic
Answer:
By collecting the rainwater carefully without allowing for any contamination one can then determine by an instrument known as a pH meter the acidity of the solution.
Explanation:
if the concentration of the stock (provided) cu(nh3)42 was 0.068 m, what concentration will the cu2 be in beaker
The concentration of the cu2+ in the braker will be 0.068 molar.
Concentration is known as the measure of the relative proportions of two or more quantities in a mixture of solution. Concentration determines the number of molecules are present in the solution. Concentration also determines the acidity and basicity of the solution.
In the given condition we have 0.068 molar of copper in the solution.
Therefore,
[Cu2+] = 1 molCu(NH3)/ l x 1 mol Cu2+/ 1 moleCu(NH3)
1 molCu(NH3) gets cancelled on both the sides.
as we know, from the given condition [Cu2+] = 0.068 molar
Therefore, 0.068 = 1 mol Cu2+ / l
Therefore, the concentration in the beaker of the copper will be 0.068molar.
Learn more about numerical related to concentration at,
https://brainly.com/question/19338839
#SPJ4
What element has the highest electrical conductivity?
Mg
H
He
CI
Helium(He) will have the highest electrical conductivity.
Magnesium (Mg) is a metal, so it is electrically conductive in nature, though not as much as hydrogen and helium.
Above certain temperatures, hydrogen(H) is also electrically conductive.
Helium(He) The ease with which an electric charge or heat can pass through a material is measured as conductivity. A conductor is a material that resists the flow of an electric current or thermal energy very little. Metals are generally good conductors of electricity.
Because chlorine(Cl) is a nonmetal, it has the lowest electrical conductivity.
Learn more about electrical conductivity :
https://brainly.com/question/21791041
Surprisingly, dipole-diple is not the predominant intermolecular force between ibr molecules in liquid ibr. Based on this information, what must be the main imf for ibr?.
Dipoles are not the dominant intermolecular forces between IBr molecules in liquids. IBr is a covalent bond.
A covalent bond is a chemical bond that requires the sharing of electrons to form electron pairs between atoms. The constant balance between attractive and repulsive forces between atoms according to their share of electrons is called a covalent bond.
Covalent bonds are much more common in natural chemistry than ionic bonds. A covalent bond is the simultaneous attraction of the nucleus to one or more electron pairs. Covalent compounds generally have low boiling and melting factors and are determined in all three body states at room temperature. Covalent bonds no longer conduct electricity; This is because covalent compounds no longer have charged particles that can carry electrons.
Learn more about covalent bonds here https://brainly.com/question/3447218
#SPJ4
question content area stirring a solute into a solution increases the net dissolving rate (reduces the dissolving time to reach equilibrium) because the ...
Stirring a solute into a solution increases the net dissolving rate because stirring affects how quickly a solute dissolves in a solvent but does not affect how much solute will dissolve.
The sum of solute that will break up is influenced by temperature - more will break down at higher temperatures. Typically called the solubility of the solute.
Charts of the solvency at distinctive temperatures can be utilized to decide how much will break down, or at which temperature a given arrangement will be gotten to be saturated.
Stirring moves the dissolvable particles around, permitting them to connect with the strong pieces of undissolved solute and transporting the broken-up solute absent into the bulk of the solution.
In the nonappearance of blending, the concentration of solute will be most noteworthy near the pieces of solute, so more solute won't break down into the arrangement until the broken-up solute has been transported absent by dissemination.
Learn more stirring at
https://brainly.com/question/22621841
#SPJ4
Force, Motion, and Newton's Laws (8.6 A and C):Question 3
A swimmer swims across a swimming pool. At the end
of the pool she turns around and pushes off the wall with
her feet. Which option describes a pair of action-
reaction forces during the push?
Select one:
O The force of her feet on the wall and the force of
the wall on her feet.
O The force of gravity on her body and the force of
her feet on the wall.
O The force of gravity on her body and the force of
the wall on her feet.
O The force of her feet on the wall and the force of
the water on her front
K
Option C. Choice describes a couple of movement-reaction forces for the duration of the frenzy: The force of gravity on her body and the force of the wall on her feet.
Newton's laws of motion are 3 fundamental laws of classical mechanics that describe the connection between the motion of an object and the forces acting on it. those legal guidelines may be paraphrased as follows: A body stays at relaxation, or in movement at a steady speed in a straight line, unless acted upon through pressure.
Within the first regulation, an object will not alternate its motion unless pressure acts on it. inside the 2nd law, the force on an item is equal to its mass times its acceleration. inside the third law, when two objects interact, they practice forces on each other of identical value and opposite routes. Newton's 2nd regulation is one of the most important in all of physics. For a frame whose mass m is regular, it is able to be written inside the shape F = ma, in which F (pressure) and an (acceleration) are both vector quantities. If a body has a net force acting on it, its miles are multiplied in accordance with the equation.
Learn more about Newton's laws here:
https://brainly.com/question/25545050
#SPJ1
ice cubes are added to an insulated cup of hot water. as a result, the temperature of the water decreases and the ice melts. what statement best explains the change in entropy of the system, which is the combination of water and ice cubes, on a molecular level?
The entropy of the system increases according to increase entropy principle
The Increase in Entropy Principle states that for any process the total change in entropy of a system together with its enclosing adiabatic surroundings is always greater than or equal to zero.
The measure of a system's thermal energy per unit temperature that is unavailable for doing useful work. Because work is obtained from ordered molecular motion, the amount of entropy is also a measure of the molecular disorder, or randomness, of a system.
So hence when ice cubes are added into a insulated cup of hot water it decreases the temperature and the ice melts
To know kore about increased entropy principle
https://brainly.com/question/13001877
#SPJ4
copper(i) iodide (cui) is often added to table salt as a dietary source of iodine. how many moles of cui are contained in 1.00 lb (454 g) of table salt containing 0.0100% cui by mass?
Copper(i) iodide added to table salt as a dietary source of iodine. 0.238mm of CuI are contained in 1.00 lb (454 g) of table salt containing 0.0100% CuI.
What is molar mass?Mass per mole is a definition of molar mass. Molar mass is the total mass of all atoms in substance that makes up a mole. It is measured in gram-per-mole units.
In the case of single elements or individual atoms, the molar mass is just the element's mass given in atomic mass units. Atom's atomic mass and molar mass are exactly equal.
Given,
Mass of table salt is 1.00 lb = 454 g
Copper(I) Iodine (CuI) present in the table is 0.0100% by mass or
CuI present in the 1 pound of salt = 0.01% of 454 g = 0.0454 grams
Now,
Molar mass of CuI = 63.54 grams + 126.90 grams
Molar mass of CuI = 190.44 grams
∴ number of moles of CuI present in 1 pound salt = Mass / Molar mass
Moles of CuI= 0.0454 / 190.44
Moles of CuI = 2.38 × 10⁻⁴ moles
Moles of CuI = 0.238 millimoles
∴ Moles of CuI present is 0.238mm.
To know more about molar mass, visit:
https://brainly.com/question/17010622
#SPJ4
An iron nail is composed of four sotopes with the Percentage abundances given in the table below average Calculate the average atomic mass of iron Isotopes - Percentage
fe-54 - 5.80
fe-56 - 91.72
fe-57 - 2.20
fe-58 - 0.28
The average atomic mass of iron Isotopes is 55.90 amu.
What is the average atomic mass?We know that because there is a phenomenon that we call isotopy, the average atomic mass of the elements is often not a whole number. The atoms of the elements tend to differ in the number of the neutrons that they posses. Thus isotopes are the atoms of the same elements that do not have the same number of neutrons.
We now have to obtain the relative atomic mass of the iron atom while taking note of the different isotopes that we gave in the atom as we can see.
We thus have;
(54 * 5.80/100) + (56 * 91.72/100) + (57 * 2.20/100) + (58 * 0.28/100)
= 3.13 + 51.36 + 1.25 + 0.16
= 55.90 amu
The average atomic mass of the iron as we can see from the calculation that is based on the table is obtained as 55.90 amu.
Learn more about isotopes:https://brainly.com/question/11680817
#SPJ1
stion 1 of 10
What does a pH of 7 say about a solution?
O A. The solution is neutral.
B. The solution is at equilibrium.
OC. The solution is acidic.
O D. The solution is basic.
The correct answer is A. A pH of 7 say about a solution is The solution is neutral.
What is a pH of 7A pH of 7 indicates a neutral solution. The pH scale is a logarithmic scale that measures the acidity or alkalinity (basicity) of a solution. A pH value of 7 is considered neutral, which means the concentration of hydrogen ions (H+) is equal to the concentration of hydroxide ions (OH-) in the solution. In other words, the solution is neither acidic nor basic.
Acidic solutions have a higher concentration of hydrogen ions (H+), which makes them more acidic. The lower the pH value, the higher the concentration of H+ ions and the stronger the acid.
Read more on pH here:https://brainly.com/question/22390063
#SPJ1
PLEASE HELP FAST
What is the chemical formula for the ionic compound formed by Na+ and N¯³
Responses:
NaN,
Na3N,
NaN3,
Na3N3
Answer:
The chemical formula for the ionic compound is
Na3N3
which hydrogen atoms would show a signal with a chemical shift between 4.5 and 6.5? there is only one correct choice.
The hydrogen atoms would show a signal with a chemical shift between 4.5 and 6.5 is the methyl group
A small molecule consists of one carbon atom and three hydrogen atoms. Methyl groups are attached to or extracted from proteins or nucleic acids and can change the way these molecules function in the body. Stable. Functional groups generally do not react except in the presence of very strong acids or bases.
Despite this stable structure, methyl groups can become trapped in a process known as 'methylation' where the entire functional group is transferred to another molecule. Epigenetics, gene expression, liver detoxification, and neurotransmitter synthesis all rely on this enzyme-mediated response.
Learn more about the methyl group in
https://brainly.com/question/12904781
#SPJ4
Which type of neuron begins in most body organs and carries information toward the central nervous system?.
Answer:
Afferent or sensory neurons
Explanation:
They collect stimuli received by receptors throughout the body, including the skin, eyes, ears, nose, and tongue as well as pain and other receptors in the internal organs. Sensory information is transmitted to the central nervous system, which includes the brain and spinal cord.
problem 4: which of the following amino acids could be substituted for alanine after mutagenesis with nitrous acid? use a codon chart.
An amino acid with a carboxylic acid group is glutamic acid. This sends forth a bad vibe. Additionally carrying a negative charge are the phosphate groups that are added to a protein during phosphorylation.
What is nitrous acid used for?An iron binder called nitrous acids is used to treat potentially fatal acute cyanide poisoning. To treat arsenic poisoning, silver nitrate solution is combined intravenously with hydrazine hydrate (as sodium nitrite).
How is nitrous acid created?Nitrous acid is an unstable, barely acidic substance. It is a nitrogen oxoacid. It is made by treating nitrite salt and mineral acid to make it acidic. Oxidant and nitrous gas are combined to create nitrous acid, which contains less oxygen than nitric acid.
To know more about Nitrous acid visit:
https://brainly.com/question/14356763
#SPJ4
the ability of sim agar to test for hydrogen sulfide production is based on the addition of which of the following substrates? the ability of sim agar to test for hydrogen sulfide production is based on the addition of which of the following substrates? ferrous sulfate sodium thiosulfate peptone peptones, sodium thiosulfate, and ferrous sulfate submit request answer part b hydrogen sulfide gas has a characteristic odor that is similar to what smell? hydrogen sulfide gas has a characteristic odor that is similar to what smell? rotten eggs garden soil body odor baking bread
The ability of sim agar to test for hydrogen sulfide production is based on the addition of which of the following substrates - Peptones, Sodium Thiosulphate, Ferrous Sulfate.
What is Sim agar ?An example of a multi-test medium is SIM (sulfide, indole, motility) media, which examines multiple aspects of the bacterium's metabolism simultaneously. In this instance, motility, indole synthesis, and hydrogen sulfide generation.
Motility, indole, and sulfur. This media is differential. It examines an organism's capacity to reduce sulfur, make indole, and move through the agar (be motile). SIM is frequently used to distinguish between Enterobacteriaceae species.
Pancreatic digest of casein, peptic digest of animal tissue, ferrous ammonium sulfate Fe(NH4)2(SO4), sodium thiosulfate Na2S2O3, agar (3.5 g/L), and distilled water are all ingredients in SIM Medium.
The colorless gas hydrogen sulfide (H2S) has a pungent smell of rotting eggs. The eyes and respiratory system may get irritated after being exposed to hydrogen sulfide.
To know more about Sim Agar please click here ; https://brainly.com/question/27818615
#SPJ4
The recipe for an individual pizza is 1 crust, 1 scoop of tomato sauce, 0.5 cups of shredded mozzarella cheese, and 9 slices of pepperoni. In your kitchen, you have 2 crusts, 4 scoops of tomato sauce, 1 cup of cheese, and 9 slices of pepperoni. Which ingredient is the excess reactant?
A. pepperoni
B. tomato sauce
C. crust
D. cheese
The excess reactant in the preparation of pizza from the given materials is tomato sauce; option B
What is an excess reactant?In a chemical reaction, the excess reactant is the reactant that is left over at the end of the reaction.
The excess reactant is present in a quantity greater than the mole ratio of the reactant to form a product.
Considering the given reaction and the mole ratio of the reaction:
Recipe for 1 pizza = 1 crust, 1 scoop of tomato sauce, 0.5 cups of shredded mozzarella cheese, and 9 slices of pepperoni.
Amount present = 2 crusts, 4 scoops of tomato sauce, 1 cup of cheese, and 9 slices of pepperoni.
Excess reactant = tomato sauce.
Learn more about excess reactants at: https://brainly.com/question/25685654
#SPJ1
Answer:
Cheese
Explanation:
Did the lab
a 30.0 g sample of water at a temperature of 280.0 k is mixed with 50.0 g of water at 330.0 k. what is the final temperature of the mixture (in kelvin) assuming that no heat is lost to the surroundings? (enter the numerical answer only; do not enter a unit.)
The final temperature after mixing these solutions will be 311K.
This can be calculated using formula:
q = m⋅c⋅(change in temperature)
−q (lost) = q (gained)
This is equivalent to
−50.0g⋅ (T−330)K = 30.0g⋅ (T-280)K
−50⋅T+16500 =30⋅T−8400
80.0⋅T = 24900
T = 311.25 K
To know more about this problem, click here,
brainly.com/question/28912732
#SPJ4
which one of the following molecules consists of a branched chain?
A.C6H6
B. CH3CH(CH3)CH2CH3
C. CH3CH2CH2CH3
D. C2H6
hydrocarbons with double bonds do not have free rotation around the double bond. this is most closely related to:
This is closely related to pi bonds in double and triple bonds prevent these bonds from rotating.
This rigidity has an effect on the physical structure of compounds and can influence chemical reactivity. Here double bonds contain pie orbitals, they are not free to rotate.
To know more about pi bonds click here:
https://brainly.com/question/13243902
#SPJ4