Answer:
a) I = 10⁻² W / m², b) β = 104.8 db
Explanation:
a) For this exercise we use the definition of decibels
β = 10 log [tex]\frac{I}{I_o}[/tex]
where I and Io are the intensities produced and the sound threshold
I₀ = 10⁻¹² W / m²
log \frac{I}{I_o} = β / 10
I = Io [tex]10^{\beta /10}[/tex]
let's calculate
I = 10⁻¹² [tex]10^{100/10}[/tex]
I = 10⁻² W / m²
b) each toad produces the same sound for which the total intensity is
I_total = 3 I
I_total = 3 10⁻² W / m²
expressed in decibels
β = 10 log ([tex]\frac{3 \ 10^{-2} }{10^{-12} }[/tex])
β = 104.8 db
The toadfish make sue of the resonance on the closed system tube to make a very loud noise and fish tube is the bladder which us used for amplifying the sounds. The sound level of the creatures has been taken as 100DB.
The intensity of the sound waves emitted by the fish is I = 10⁻² W / m², The intensity of he waves and level of the three of these toadfish is make a sound at the same time is that of β = 104.8 DB.Learn more about the use of resonance in a closed tube to produce.brainly.com/question/14700223.
A closed pipe creates a fifth
harmonic frequency of 125 Hz.
What is the next lower frequency
that will create a standing wave in
the pipe?
(Speed of sound = 343 m/s)
(Unit = Hz)
PLEASE HELP QUICKLY, WILL GIVE BRAINLIEST
Answer:
75 hz
Explanation:
Trust
The next frequency will be 75.0 Hertz
Wait, how do you know if it is correct?!
Well, it is correct for Acellus:)
Try it in other schools/academies:)
A 2000-kg elevator is at rest when its cable breaks. The elevator falls 26 m before it encounters a giant spring at the bottom of the elevator shaft. As the elevator falls, its safety clamp applies a constant frictional force of 17,000 N. 1. List all the forces acting on the elevator after the cable breaks but before it hits the spring. Determine the work done by each force on the elevator. Make sure these work terms have the appropriate signs (positive or negative). 2. Calculate the net work done on the elevator. 3. Use the work-kinetic-energy theorem to determine the speed of the elevator right before it encounters the spring. 4. After the elevator encounters the spring, the spring compresses by 0.6 m before the elevator comes to rest. The safety clamp continues to apply a constant 17,000 N force. List all the forces acting on the elevator while it falls this final 0.6 m. 5. For each force listed in question F4, determine an expression for the work it does on the elevator. Make sure each work term has the appropriate sign (positive or negative). 6. Use the work-kinetic-energy theorem to determine the value of the spring constant k.
Explanation:
work done =force *distance
work done =17000*26
work done=442,000 joules.
3. How much work is necessary to lift 10 kg 5m in the air?
1) 10N
3) 490 J
2) 50 J
4) 4900 J
Answer:
I'm not 100 percent sure but I have had a question very similar to this and I think 2.)50 j
A 70 kg bicyclist rides his 9.8 kg bicycle with a speed
of 16 m/s.
How much work must be done by the brakes to bring the bike and rider to a stop?
Hello,
QUESTION)✔ We have Ek = 1/2m x v²
Ek = 1/2 x 79.8 x 16²Ek = 10 214.4 JIn order to come to a complete stop, the cyclist must convert all his kinetic energy into thermal energy. Given that the braking force opposes movement, the work is therefore resistant, i.e. W = -10 214.4 J.
Part A
n
Rank the light intensity, from largest to smallest, at the point P in the figures.
View Available Hints
Reset
Help
E
D
C
B
A
2 bulbs
3 bulbs
00
4 bulbs
XOXO
1 bulb
2 bulbs
co
T0.5 m
1.0 m
1.5 m
个
1.0 m
p
2.0 m
P
P
OP
Largest
Smallest
The light intensity from largest to smallest ranking will be :
B > D > A=C > E
What is intensity ?
In physics, the intensity is the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy
equation to find intensity is I = P/ 4π(d^2)
where P = Power
I = intensity
d = distance where the intensity need to be found
let power of 1 bulb be = P
case A = I = P / (1)^2 = P / 1 =P
case B = I = 2P/ (0.5)^2 = 8P
case C = I = 4P / (2)^2 = P
case D = I = 3P / (1)^2 = 3P
case E = I = 2P /(1.5)^2 = 0.8 P
The light intensity from largest to smallest ranking will be :
B > D > A=C > E
learn more about intensity :
https://brainly.com/question/13155277?referrer=searchResults
#SPJ3
Oil having a density of 926 kg/m3 floats on water. A rectangular block of wood 3.69 cm high and with a density of 974 kg/m3 floats partly in the oil and partly in the water. The oil completely covers the block. How far below the interface between the two liquids is the bottom of the block
Answer:
the position of the wood below the interface of the two liquids is 2.39 cm.
Explanation:
Given;
density of oil, [tex]\rho _o[/tex] = 926 kg/m³
density of the wood, [tex]\rho _{wood}[/tex] = 974 kg/m³
density of water, [tex]\rho _w[/tex] = 1000 kg/m³
height of the wood, h = 3.69 cm
Based on the density of the wood, it will position across the two liquids.
let the position of the wood below the interface of the two liquids = x
Let the wood be in equilibrium position;
[tex]F_{wood} - F_{oil} - F_{water} = 0\\\\\rho _{wood} .gh - \rho _o .g(h-x) - \rho_w .gx = 0\\\\\rho _{wood} .h - \rho _o (h-x) - \rho_w .x = 0\\\\\rho _{wood} .h -\rho _o h + \rho _o x - \rho_w .x =0\\\\h (\rho _{wood} -\rho _o ) = x( \rho_w - \rho _o)\\\\x =h[\frac{ \rho _{wood} -\rho _o }{\rho_w - \rho _o} ]\\\\x = 3.69\ cm \times [\frac{974 - 926}{1000-926} ]\\\\x = 2.39 \ cm[/tex]
Therefore, the position of the wood below the interface of the two liquids is 2.39 cm.
A 100 W engine generates 1000 J of energy. How long did it run for?
A. 1 s
B. 10 s
C. 5 s
D. 100 s
Answer:
B. 10 s
Explanation:
Given the following data;
Power = 100 Watts
Energy = 1000 Joules
To find the time;
Power can be defined as the energy required to do work per unit time.
Mathematically, it is given by the formula;
[tex] Power = \frac {Energy}{time} [/tex]
Making time the subject of formula, we have;
[tex] Time = \frac {Energy}{Power} [/tex]
Substituting into the formula, we have;
[tex] Time = \frac {1000}{100} [/tex]
Time = 10 seconds
Select the correct answer.
In general, how does an increase in distance from the Sun affect a planet?
ОА. .
The amount of sunlight the planet receives decreases.
OB.
The gravitational force exerted by the Sun increases.
ОС.
The thickness of a planet's atmosphere increases.
OD. The planet's atmosphere absorbs more heat.
Answer:
a.
gravity decreases by distance
thickness doesn't change
Less heat.
explain why radiation is dangerous for humans
Answer:
because it affects the attom in living things
A continental polar air mass forms in
a. the Pacific Ocean.
b. northern Canada.
c.
the Gulf of Mexico.
the desert Southwest.
d.
Please select the best answer from the choices provided
А
B
ОООО
С
SnnsbblHShhssbx bdBBB B BBDDBDBX Z .
my uq xbbbnxnjjxjxusjhhhwhhhnn he c x. Yes suhsjjdhhehy yes eirui
M I was going ask m
Iqijjm.ndjbh
Answer:
B. Northern Canada
Explanation:
A continental polar air mass can form over the land during the winter months. In the Northern Hemisphere, it originates in northern Canada or Alaska. As it moves southward, it brings dry weather conditions to the United States. Temperature and humidity levels are both low. Hope this helps :)
To determine the pressure in a fluid at a given depth with the air-filled cartesian diver, we can employ Boyle's law, which states that the pressure in an ideal gas (held at constant temperature) is inversely proportional to its volume. At a fluid's surface, the pressure of the fluid is the same as the pressure of the atmosphere just above it, which we'll denote as LaTeX: P_{atm}P a t m. If the volume of air, which can be treated as an ideal gas here, in the cartesian diver decreases by 19% as it is lowered to a specific depth in the fluid, the pressure of the fluid at this depth, in terms of atmospheric pressure, is
Answer:
The pressure at this depth is [tex]1.235\cdot P_{atm}[/tex].
Explanation:
According to the statement, the uncompressed fluid stands at atmospheric pressure. By Boyle's Law we have the following expression:
[tex]\frac{P_{2}}{P_{1}} = \frac{V_{1}}{V_{2}}[/tex] (1)
Where:
[tex]V_{1}, V_{2}[/tex] - Initial and final volume.
[tex]P_{1}, P_{2}[/tex] - Initial and final pressure.
If we know that [tex]V_{2} = 0.81\cdot V_{1}[/tex], then the pressure ratio is:
[tex]\frac{P_{2}}{P_{1}} = 1.235[/tex]
If [tex]P_{1} = P_{atm}[/tex], then the final pressure of the gas is:
[tex]P_{2} = 1.235\cdot P_{atm}[/tex]
The pressure at this depth is [tex]1.235\cdot P_{atm}[/tex].
The pressure of the fluid at this depth will be "1.16 [tex]P_{atm}[/tex]".
Pressure and VolumeAccording to the question,
Let,
The volume of surface be "100 units".
then,
The volume of depth be:
= 100 - 14
= 86 units
We know the relation,
P ∝ [tex]\frac{1}{V}[/tex]
here, PV = Constant
By using Boyle's law,
→ P₁ V₁ = P₂ V₂
or,
→ P₂ = [tex]\frac{P_1 V_1}{V_2}[/tex]
By substituting the values, we get
= [tex]\frac{P_{atm}\times 100}{86}[/tex]
= 1.16 [tex]P_{atm}[/tex]
Thus the above answer is appropriate.
Find out more information about pressure here:
https://brainly.com/question/2117709
Most stars are _____ compared to the sun.
slightly smaller
much bigger
much smaller
slightly bigger
Evaluate for f(-4)
F(x) =3x2 -5 +7
Answer: -4f=8
Explanation:
.HOW DOES PHYSICAL EDUCATION BENEFIT YOUR EMOTIONAL HEALTH ?
Answer: reduce anxiety, depression, and negative mood and by improving self-esteem and cognitive function.
Explanation:
Help me with both questions please?
Answer:
1. They all accelerate at the same rate.
2.The object travels at a constant velocity throughout the fall.
Explanation:
Earths gravitational pull is at a constant 9.08 m/s^2. so when objects are free falling, the objects in question can only fall so fast before it would break gravity so to speak.
1.Briefly describe the wind motion of the stationary front
.
2.What is another name for stationary front.
Answer:
stationary front is when it is not moving that is why weather is the same in some areas
Explanation:quasi-stationary front
A physics class performs an experiment to determine the winner of a race. An empty can, a solid cylindrical battery and a marble roll, all with the same radius) without slipping down an inclined plane of vertical height H (they are all released at the same height). A box slides without friction on another inclined plane of the same height, H. Which object reaches the bottom of the incline first
Answer:
a) SPHERE must be the winner
b) BOX is most fastest
Explanation:
For this exercise we must use conservation of energy
starting point. Highest part of the plane
Em₀ = U = m g h
final point. Lowest part of the plane
Em_f = K = ½ m v² + ½ I w²
Note that as the objects roll, the kinetic energy of rotation is included. Energy is conserved
Em₀ = Em_f
mg h = ½ m v² + ½ I w²
the linear and rotational variables are related
v = w r
w = v / r
the moment of inertia of the bodies is tabulated
ring (empty can) I = m r²
cylinder I = ½ m r²
sphere (marbles) I = 2/5 m r²
mgh = ½ m v² + ½ I v²/r² = ½ mv² (+ I / mr²)
2gh / (1 + I / mr²) = v² (1)
Let's analyze the value of I / mr2
can I / mr² = mr² / mr² = 1
cylinder I / mr² = ½ mr² / mr² = ½
sphere I / mr² = 2/5 mr² / mr² = 2/5
we substitute in equation 1
v = [tex]\sqrt{ \frac{2gh}{ (1+ \frac{I}{m r^2}) } }[/tex]
can v = √(2gh / 2) = √ gh
v = √gh
cylinder v= [tex]\sqrt{ \frac{2gh}{ \frac{3}{2} } }[/tex] = √(4gh/3)
v = 1,155 √gh
sphere v = [tex]\sqrt{ \frac{2gh}{ \frac{7}{5} } }[/tex] = √(10gh/7)
v = 1.20 √gh
therefore the object with the highest speed is the one that takes less time, consequently the SPHERE must be the cattle.
b) for a box on a frictionless surface, there is no rotational kinetic energy
mgh = ½ m v²
v = √2gh
v = 1.41 √(gh)
When comparing with the latter, this would be the one that arrives first
A bar magnet has
a. one magnetic pole.
b. two magnetic poles.
c. three magnetic poles.
d. four magnetic poles.
Answer:
b
Explanation:
Bar magnets have two magnetic poles
A metal cube 1.0 cm on each side is sandwiched between two electrodes. The electrodes create a 0.0050N/C electric field in the metal. A current of 9.0 A passes through the cube, from the positive electrode to the negative electrode. Identify the metal.
a-Tungsten
b-gold
c-silver
d-copper
Answer:
This is Tungsten .
Explanation:
Electrical field E = V / l , V is potential diff and l is length
.005 = V / .01
V = .005 X .01 = 5 X 10⁻³ volts
I current = 9A
Resistance R = V / I
= 5 x 10⁻³ / 9
= 5.55 x 10⁻⁶ ohm .
To calculate resistivity :
R = ρ l / S , l is length , S is cross sectional area
5.55 x 10⁻⁶ = ρ x .01 / .01 x .01
ρ = 5.5 x 10⁻⁸
This is Tungsten .
Which of the following situations would cause the greatest decrease in the
motion of molecules in a system?
A
Explanation:
hindi ako sure kung tama ba yan
Read the following statements. Which statement provides the correct definition of weather? Select your answer from the options below. * 1 point
Atmospheric conditions at a specific time in a specific area
Atmospheric conditions over a period of time in a specific area
Average atmospheric conditions over a period of time in a region
Average atmospheric conditions across the world
Answer:
In one day, a store sells 14 pairs of jeans. The 14 jeans represent 20% of the total number of items sold that day. How many items did the store sell in one day? Explain or show how you got your answer.
plz help with the qsn
Explanation:
Sound waves rely on matter to transmit their energy. They cannot ravel in a vacuum. True or false
Answer:
false
Explanation:
Hello,
QUESTION)True,Sound travels in a material medium, in space, there is no matter, so sound cannot propagate.
Which of the following can be studied by science?
O A. Value judgments
O B. Matters of opinion
O C. Questions of right and wrong
O D. Natural phenomena.
Which of the following is the tendency of a system to become more
disordered?
A. Energy
B. Heat
C. Entropy
D. Efficiency
Answer:
b
Explanation:
the more heat the hotel it get which cause more heat
Answer: C. Entropy
Explanation: a pex :)
Which DOES NOT happen during the phase change from liquid to solid?
Kinetic energy decreases
Particles move slower
Freezing occurs
Temperature increases
Answer:
Temperature increases
During the phase transition from liquid to solid, kinetic energy diminishes, particles move slower, and freezing occurs.
Phase change:Extreme heat is more likely to occur as a result of rising temperatures, and it will last longer. Heatwaves can indeed be deadly, resulting in manifestations including heat kinks and heat exhaustion, as well as death.
Warmer temperatures have the potential to trigger a cascade of other changes around the world.The greenhouse effect is worsened by these gas emissions, which cause the earth's crust temperature to rise. Burning fossil fuels has the greatest impact on climate change of any human activity.Since in changement from liquid to solid the temperature will decrease.Therefore, the final answer is "Temperature increases".
Find out more about the phase change here:
brainly.com/question/11490613
A light string is wrapped around the edge of the smaller disk, and a 1.50 kgkg block is suspended from the free end of the string. If the block is released from rest at a distance of 2.40 mm above the floor, what is its speed just before it strikes the floor
Answer:
The speed of the block before it strikes the floor is 0.217 m/s.
Explanation:
Given;
mass of the block, m = 1.5 kg
height above the ground through the block was released, h = 2.4 mm = 2.4 x 10⁻³ m
The speed of the block before it strikes the floor will be maximum.
Let the speed of the block before it strikes the floor = v
Apply the principle of conservation of mechanical energy to determine the speed of the block.
K.E = P.E
¹/₂mv² = mgh
¹/₂v² = gh
v² = 2gh
v = √2gh
v = √(2 x 9.8 x 2.4 x 10⁻³)
v = 0.217 m/s
Therefore, the speed of the block before it strikes the floor is 0.217 m/s.
In the “Elastic Collision" part of this activity, what happened to the momentum of the red cart after the collision? What happened to the momentum of the blue cart after the collision?
Explanation:
Elastic collision between balls of equal mass viimis 1.5 mys 1.5m/s 1! mis ... Make a data table for the following: mass, velocity and momentum of each ball before ... Part 2 moving faster. ... Summary: Describe the main ideas learned in this activity regarding initial and ... Collision 2: Blue Cart Moving Slower than the Red Cart.
1. What is the ideal mechanical advantage of a wedge that is 12 cm long
and 4 cm wide?
A. 16
B. 48
C. 3
D. 8
What impact could lowering the pH of ocean water have? choose all that apply
O sea level rise
O shellfish decreasing
O decreasing amount of coral
Ofish being "burned by the acid"
A 40.0 kg block of lead is heated from -25°C to 200°C.
How much heat is absorbed by the lead block?
A. 2,354,000 J
B. 1,170,000 J
C. 56,891 J
D. 10,650 J
Answer:
B. 1,170,000 J
Explanation:
Given;
mass of lead block, m = 40 kg
initial temperature, t₁ = -25 ⁰C
final temperature, t₂ = 200 ⁰C
The heat absorbed the lead block is calculated as;
H = mcΔt
where;
c is the specific heat capacity of lead = 130 J/kg⁰C
H = 40 x 130 x (200 - (-25))
H = 40 x 130 x (200 + 25)
H = 40 x 130 x 225
H = 1,170,000 J
Therefore, the heat absorbed the lead block is 1,170,000 J