The value of probability density will be

Answers

Answer 1
The probability density function is nonnegative everywhere, and its integral over the entire space is equal to the terms "probability distribution function" and "probability function" have also sometimes been used to denote the probability density function.
Answer 2

The probability density function is nonnegative everywhere, and its integral over the entire space is equal to the terms "probability distribution function" and "probability function" .

What is probability density function?

In probability theory, a probability density function (PDF), or density of a continuous random variable, is a function whose value at any given sample (or point) in the sample space (the set of possible values taken by the random variable) can be interpreted as providing a relative likelihood that the value of the random variable would be equal to that sample.

Probability density is the probability per unit length, in other words, while the absolute likelihood for a continuous random variable to take on any particular value is 0 (since there is an infinite set of possible values to begin with), the value of the PDF at two different samples can be used to infer, in any particular draw of the random variable, how much more likely it is that the random variable would be close to one sample compared to the other sample.

Learn more about probability density function,here:

https://brainly.com/question/30403935

#SPJ2


Related Questions

as the ionic compound decreases in size, the melting point __
A. increases
B. decreases
c stays the same

Answers

Answer:

A. increase

Explanation:

the smaller the size of the ionic compounds, the more closer they get packed together. This means electrostatic attraction also increases, which means the ionic bonds gets stronger...therefore increases the melting point

The density of crystalline cl2 at 160K is 2.02g/cm3. calculate the molar volumes

Answers

molar volumes of the density of crystalline is 60

The molar volume (Vm) is the volume occupied by one mole of a chemical element or chemical compound at standard temperature and pressure (STP). The molar volume of Cl₂ is 35.10 cm³/mol.

One mole of any gas has a defined volume when it is at a particular temperature and pressure. The relationship between molar mass and molar volume is direct and inverse, respectively.

Two gases have equal molecules if their volumes are the same at a given temperature and pressure. A gas's volume is directly proportional to the number of moles it contains. One mole of any gas takes up 22.4 L of space at STP.

The expression used to calculate molar volume is:

Molar volume = Molar mass / Density

The molar mass of Cl₂ = 70.906 g/mol

Molar volume = 70.906 / 2.02

Molar volume = 35.10 cm³/mol

To know more about molar volume, visit;

https://brainly.com/question/29884686

#SPJ3

Which of the following is considered to be matter?
O A. Water
O B. Facts
O C. Energy
D. Theories

Answers

option a is correct

bcz the defination of matter is that

anything which occupy space

water can occupy space so it is matterfact :something that you know has happened or is true which doesn't occupy any space so this option is falseenergy : energy is the quantitative property that must be transferred to a body or physical system to perform work on the body, or to heat it. it doesn't occupy any space so this option is falseA theory is a well-substantiated explanation of an aspect of the natural world that can incorporate laws, hypotheses and facts.--it doesn't occupy any space so this option is false

Hence , option a is correct

why lysine is less basic than arginine

Answers

Answer:

Arginine is the most basic among them because it contains guanidine side group, −(CH2)4NHC(=NH)NH2, which is basic. Lysine has two amine groups, which makes it overall basic because of the second isolated amine group (−(CH2)4NH2). Histidine, on the other hand, contains imidazole group, which is also basic.

Explanation:

hope this helps

if its helps please please please please please please please reply

Carbon has a half-life of 5,730 years and you found a fossil with 4 atoms of Carbon and 12 atoms of
Nitrogen, how old would it be?

a. 0 years old
b. 5,730 years old
c. 11,460 years old
d. 17,190 years old

Answers

Answer:

D. 17,190 years old

please help
write the correct IUPAC name for these componds

Answers

Answer:

A. 4,6-dimethyloct-1,4,6-yne

B. deconic acid

C. 3-ethyl-4-methyl-7-bromocyclohexene

D. 2,2,3-trimethyl-4-butyl-heptane

E. 3-methylhexane

F. ethyl hexanoate

G. butanal

H. propyne

J. 2,4-dimethyl-pent-2-ene

Explanation:

sorry i didn't have time to do I

If I place an egg in carbonated water will the egg gain or lose mass?

Answers

Answer:

The egg will gain mass.

Explanation:

Eggs soaked in distilled water will gain mass and appear dramatically swollen.

Answer:

Gain mass

Explanation:

Carbonated water will create a reaction inside the egg making the fluid inside the egg becoming more solid thus gaining mass

Hope this helps!

The temperature went from 25 to 90 degrees Celsius. What is the CHANGE in temperature?

Answers

Answer:

+65 degress ?

Explanation:

I feel like there is more to this question

Read the statement. Magnesium atoms have 12 electrons, with the configuration 2-8-2. If the first five ionization energies of magnesium are shown, which ionization energy would show a sudden sharp increase?

Answers

The electronic configuration of magnesium is:

1s² 2s² 2p⁶ 3s² = [Ne] 3s²

This means that for a magnesium atom, in order to have its outermost orbital full, the easiest way would be to lose the two outermost electrons. This is seen in its relatively low first two ionization energies. The third ionization energy is several times higher because the ion would move from a stable form to an highly unstable form. (Mg⁺² → Mg⁺³ + e⁻).

Sodium only has one electron in its outermost orbital, so its first ionization energy would be several times lower than the second.

What are three Possible overlaps that can occur during bond formation​

Answers

Answer:

The Sigma (σ) Bond

S-S Overlapping. In this kind of overlapping, one 's' orbital from each participating atom undergoes head-on overlapping along the internuclear axis. ...

S-P Overlapping. ...

P-P overlapping.

Convert 12.044×10²² molecules of sulphur dioxide into moles​

Answers

Answer:

➜ Properties of liquids and gases. Liquids have a fixed volume but no fixed shape. Gases have no fixed volume and no fixed shape. Gases expand to fill the space available. They can also be compressed into a very small space.

Explanation:

12.044 × 10 ²³molecules of sulphur dioxide are 0.2 mole.

I need the skeleton equation for the following sentence!

Carbon dioxide gas and solid calcium oxide are produced in the decomposition of solid calcium carbonate.

Answers

Answer:

A. CaCO(s)+SO(g)+O(g) --> CaSO(s)+CO(g)

A. CaCO(s)+SO(g)+O(g) --> CaSO(s)+CO(g)

the mechanism of phosphorus fixation in the alkaline soil and acid soils​

Answers

Answer:

absorption or precipitation or by both

Explanation:

the empirical mass is a whole number multiple of the molar mass true or false?​

Answers

Answer:

True

Explanation:


Which of the following is true about the mass of atoms?
А
An individual atom has no mass.
B
The atom of every element has a unique mass.
С
The mass of an atom increases with temperature,
D
The mass of an atom varies over time

Answers

Answer:

i think the answer is C , atom mass increases with temperature

What is the lowest frequency photon that can ionize a hydrogen atom with excited state electron configuration 3s^1?

Answers

67 because it’s the lowest frequency photon

name the main form of energy released by the reaction between hydrogen and oxygen inside a combustion engine

Answers

Answer:

When molecular hydrogen (H2) and oxygen (O2) are combined and allowed to react together, energy is released and the molecules of hydrogen and oxygen can combine to form either water or hydrogen peroxide . These two processes are represented by the two chemical equations shown at right.

HEY!!^^

have a good day ^^

thank me later ^^

carryonlearing ^^^


3. Given 20g of Barium Hydroxide, how many grams of
Ammonium Nitrate would it take for all the Barium Hydroxide
to react? Balance the chemical equation first

Answers

The number of grams of ammonium nitrate (NH₄NO₃) it would take for all the barium hydroxide to react is 18.7g

First, we will write the balanced chemical equation for the reaction

The balanced chemical equation for the reaction is

Ba(OH)₂ + 2NH₄NO₃ → 2NH₄OH + Ba(NO₃)₂

This means, 1 mole of barium hydroxide is required to react with 2 moles of ammonium nitrate

Now, we will calculate the number of moles of barium hydroxide present.

Mass of barium hydroxide (Ba(OH)₂) = 20 g

Using the formula

[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass}[/tex]

Molar mass of Ba(OH)₂ = 171.34 g/mol

∴ Number of moles of Ba(OH)₂ present =[tex]\frac{20}{171.34}[/tex]

Number of moles of Ba(OH)₂ present = 0.116727 mole

Now,

Since 1 mole of barium hydroxide is required to react with 2 moles of ammonium nitrate

Then,

0.116727 mole of barium hydroxide will react with 2 × 0.116727 mole of ammonium nitrate

2 × 0.116727 = 0.233454 mole

∴ Number of moles of NH₄NO₃ required is 0.233454 mole

Now, for the mass of ammonium nitrate (NH₄NO₃) required

From the formula

Mass = Number of moles × Molar mass

Molar mass of NH₄NO₃ = 80.043 g/mol

∴ Mass of NH₄NO₃ required = 0.233454 × 80.043

Mass of NH₄NO₃ required = 18.68636 g

Mass of NH₄NO₃ required ≅ 18.7g

Hence, the number of grams of ammonium nitrate (NH₄NO₃) it would take for all the barium hydroxide to react is 18.7g

Learn more on determining mass of reactant required here: https://brainly.com/question/11232389

chemist wished to find the volume of a large barrel and had no equipment for measuring the amount of water needed to fit it. He added of 400g of pure sodium chloride barrel and filled with chlorine free water. After thorough mixing a 100 ml sample of the solution re

Answers

Answer:

Place the object in the graduated cylinder, and record the resulting water volume as "b." Subtract the volume of the water alone from the volume of the water plus the object. For instance, if "b" was 50 milliliters and "a" was 25 milliliters, the volume of the irregularly shaped object would be 25 milliliters.

How many oxygen do we have in the FE2(so4)3

Answers

Explanation:

What do you mean by 'how many oxygen'?

oxygen atoms? or oxygen percentage?

if oxygen atoms is 12 atoms

why do we need to study thermodynamics?

Answers

Knowledge of thermodynamics is required to design any device involving the interchange between heat and work, or the conversion of material to produce heat (combustion). Examples of practical thermodynamic devices: What is thermodynamics? The study of the relationship between work, heat, and energy

Gaseous chlorine dioxide (ClO2) is used in bleaching flour and municipal water treatment in
500.0L containers. If these processes are performed at room temperature (22.0°C) using 52.1
moles of gas, what is the pressure? Must show calculation setup.

Answers

Taking into account the ideal gas law, the pressure is 2.52 atm.

An ideal gas is a theoretical gas that is considered to be composed of randomly moving point particles that do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas are related by a simple formula called the ideal gas law. This equation relates the three variables if the amount of substance, number of moles n, remains constant. The universal constant of ideal gases R has the same value for all gaseous substances. The numerical value of R will depend on the units in which the other properties are worked.

P×V = n×R×T

In this case, you know:

P=?V= 500 Ln= 52.1 molesR= 0.082[tex]\frac{atmL}{molK}[/tex]T= 22 C= 295 K (being 0 C=273 K)

Replacing in the ideal gas law:

P×500 L = 52.1 moles ×0.082 [tex]\frac{atmL}{molK}[/tex] ×295 K

Solving:

P= (52.1 moles ×0.082 [tex]\frac{atmL}{molK}[/tex] ×295 K)÷ 500 L

P= 2.52 atm

Finally, the pressure is 2.52 atm.

Learn more about ideal gas law:

https://brainly.com/question/4147359?referrer=searchResults

By titration, it is found that 73.3 mL of 0.175 M NaOH(aq) is needed to neutralize 25.0 mL of HCl(aq). Calculate the concentration of the HCl solution.

Answers

Answer:

0.5131M

Explanation:

NaOH(aq) + HCl(aq) — NaCl(aq) + H20(l)

Mole ratio of acid to base 1:1

(Ca × Va)/ (Cb × Vb) = Na/Nb

(0.175 × 73.3)/ (Cb × 25)= 1/1

12.8275= 25 × Cb

Cb= 12.8275/25

= 0.5131M

1. In a heterogeneous mixture, the substances
A. can be physically separated.
B. are chemically combined.
C. can only be separated through chemical
processes.
D. break down into new substances.

Please answer

Answers

A. Can be physically separated

Heterogeneous mixtures is a mixture of two or more chemical substances (elements or compounds), where the different components can be visually distinguished and easily separated by physical means.

Hope this helps!
Brainliest and a like is much appreciated!

I have experiment measuring sugar content with liquid what should can I say in future remarks I want three points please help

Answers

Answer:

Liquid sugar is the sugar you consume in liquid form from beverages like sugar sweetened soda. The sugar in beverages is often highly concentrated and easy to consume in large amounts without feeling full. Some examples of these drinks are fairly obvious, such as sodas and fruit punch.

What is the theoretical amount of sodium citrate (Na3C6H5O7) produced if you react 85.0g of citric acid (H3C6H5O7) in excess amount sodium hydroxide? If you actually produced 97.3 g of sodium citrate what is the percent yield?

Answers

Answer:

i did not find the amswer sorry

How do you out pizza the hut?

Answers

Awnser : you can’t. Pizza Hut can’t be outfitted

1 gallon is how many mm

Answers

Answer:

0.133681 (cubic foot)

Explanation:

Why do we feel cold when we touch the iron?
A) Heat flows from iron to our body.
B) Heat flows from our body to iron.
C) Heat flows from iron to iron
D) Heat does not not flow
Please answer it soon as possible ​

Answers

Heat flows from our body to iron

write the conjugate bases of the following acids ? H₂S , HCOOH ,HSO₃¯ , HSO¯₄ , HS¯, HNO₂ ,HCN,?​

Answers

Answer:

HS(-)

HCOO(-)

SO3(2-)

SO4(2-)

S(2-)

NO2(-)

CN(-)

Explanation:

The parenthesis are the charges of the compounds. When an acid is introduced in a base, it dissociates its Hydrogens giving protons to the base. In this case, if you remove one hydrogen of a compound, you will reduce the charge of a compound since basically you're removing a positive charge from a compound. If you need to, I can explain how the thing of the charges work.

In fact, the definition of a conjugate base is a compound created when the original (an acid) compound dissacioate an atom of hydrogen (a proton) in a base.

Other Questions
What is virtopsy? What are some of its advantages? 21. Which of the following is the best way to clean up an acid spill?A. Wash down the acid spill with plenty of water.B. Wipe up the acid spill with paper towel.C. Spread sawdust on the acid spill to absorb it.D. Neutralize the acid spill with a base; then wash it with plenty of water.T1 Someone help me please If ABCD is a parallelogram, m what is the energy (in j) of a photon required to excite an electron from n = 2 to n = 8 in a he ion? submit an answer to three signficant figures. Read this excerpt from a passage. Robots have been around longer than many people realize. Archytas, who lived in Greece over 2,300 years ago, is believed to have created the first robot. Archytas built a steam-powered mechanical bird that was able to flap its wings and fly over 200 yards. However, it was not until the late 1700s, with the beginning of the Industrial Revolution, that the world saw the large-scale use of more complex machines. Mechanization took another leap during the 1930s, when machines were introduced into many workplaces in order to increase productivity. Instead of hiring workers to perform tasks on an assembly line, factory owners used automated machines that could do the work of several people. Then, in 1954, George Devol created the Unimate, a robotic arm. The Unimate began working on the assembly line at General Motors in 1961, taking on unpleasant, dangerous, and repetitive tasks. This robotic worker had many advantages over human workers. The Unimate did not require a salary, followed company rules, and never called in sick (although it did require the occasional repair). In addition, the Unimate could work twenty-four hours a day, seven days a week. Manufacturers that used the Unimate and other industrial robots saw a marked increase in productivity and a decrease in labor costs.What features show this is an example of historical writing? a. It uses primary research that is based on the scientific method. b. It explains, outlines, and analyzes current trends. c. It focuses on the causes and consequences of certain events. d. It relies on anecdotes, examples, and testimonies as evidence. Select the correct answer.If a = 0.3 and b =0.5, what is the value of a+b?A.8/10B.8/9 C.80/99D.88/100 d20) A department store buys 200 shirts atof $2,400 and sells them at a selling price of $20each. Find the percent markup.Pls answer now I need it pls Share and ShowMATHBOARDModel the product on the grid. Record the product.1. 3 X 13 =2. 5 >Find the product. please help quickly!!!!!!!If y varies directly with x, determine an equation for the given direct variation. For this question, find the value of the given variable.Find y when x = 10 if y = 8 when x = 20. which integer represents 8c below 0?immersive reader (1 point) Explain political machines and their role in city governments What is the name of the tide when the sun, moon, and earth are all aligned, causing the greatest pull for highest and lowest tides?Question 10 options:Low tideSpring tideHigh tideNeap tide A/An _______ can only be performed by a licensed health care professional The N2O decomposition, 2 N2O (g) 2 N2 (g) + O2 (g), is a zero order reaction that has a reaction rate constant of 2.00 103 M/s. Initially, 2.00 moles of N2O gas are infused into a 1.00 L vessel at 300. K.Calculate the pressure inside the vessel at 100. seconds after the start of the reaction. Temperature is held constant. Which example describes an entrepreneur organizing human natural and capital resources to produce goods?o Abusinessperson builds a factory to make clay pots.A farm worker picks strawberries in a fieldA worker on an assembly line works on a car.A truck driver delivers food to a grocery store What right was roes argument based on? the right to maternity leave the right to privacy the right to regulate medical standards the right to gender equality. Answer it correctly please Describe your favorite piece of clothing How do you feel when you wear it? Do you have a favorite memory connected to this piece of dothing, and if so, what is it? BRAINLIEST TO FIRST RIGHT ANSWERStudents were investigating heat transfer by conduction and they set up the simple experiment you see here. They utilized three spoons made of different materials: the specific heat capacity of each material was recorded in the students' data table. Each spoon was placed in a pot of hot (90C) water and a pat of butter was placed on the handle of each spoon. The butter melted first on the tin spoon and in about the same amount of time on the plastic and wood spoons. Based on the data table and the experimental results select ALL of the conclusions that are appropriate.A) Conduction occurred more readily in the tin due to its lower specific heatcapacityB) Heat transfer via conduction occurred from the hot water to the spoonsand then to the butter,C) When in contact with hot water, there was no transfer of kinetic energythrough the wood or plasticD) The atoms in the tin spoon vibrated and collided at a greater rate thonthose in the wood or plastic spoonsE) In all three cases energy s transferred from the faster moving hot watermolecules to the slower moving molecules in the spoon