Answer:
B
Explanation:
a=v/t
a=(40m/s)÷(80s)
a=0.5m/s
A hot tungsten filament emit electromagnetic radiation within
A hot tungsten filament emit electromagnetic radiation within the bulb because the tungsten is present within the bulb.
What temperature does a tungsten filament glow at?Due to its high melting point, tungsten can be heated to 3000°C where it glows white hot providing very good brightness due to the presence of argon.
So we can conclude that a hot tungsten filament emit electromagnetic radiation within the bulb.
Learn more about radiation here: https://brainly.com/question/893656
Electromagnetic radiation is made up of electromagnetic field waves. A hot tungsten filament emits electromagnetic radiation in the presence of Argon.
What is electromagnetic radiation?Electromagnetic radiation is made up of electromagnetic field waves that travel through space carrying electromagnetic radiant energy. Radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays are all examples of electromagnetic waves.
When tungsten is heated to a temperature of around 3000 °C, the tungsten starts to emit lights. Tungsten when used in a bulb as a filament then because of its high melting point when electricity is passed through it, it starts to shine white-hot and provides extremely good brightness due to the presence of argon.
Hence, A hot tungsten filament emits electromagnetic radiation in the presence of Argon.
Learn more about Electromagnetic Radiation:
https://brainly.com/question/10759891
#SPJ4
how can you say metre cube is a derived unit
Answer:
The newton (lowercase n!) is a derived unit because its definition consists of multiplication of three defined base units and nothing else. Its meaning is thus derived, not independently defined.
How long does it take for jupiter to rotate on its axis.
Answer:
10 hours.
Every 10 hours, Jupiter will rotate at least once. It takes 12 years for Jupiter to make a revolution. This is because Jupiter is a gas, non-solid planet and also has a very large mass.
Answer: 10 Hours
Explanation:
Jupiter is the fastest spinning planet in the solar system
meters/second?
A car accelerates from 4 meters/second to 16 meters/second in 4 seconds. The car's acceleration is what meters/second squared
Answer:
the acceleration of the car is 3 m/s².
Explanation:
angular velocity of a rotating wheel increases 2 rev/s every minute. The angular acceleration of this wheel is:
The angular acceleration of the rotating wheel at the given rate of change of angular velocity is 0.21 rad/s².
Angular acceleration of the wheel
The angular acceleration of an object is the rate of change of anguar velocity of the object with time.
[tex]\alpha = \frac{\Delta \omega }{\Delta t}[/tex]
where;
Δω is the change in the angular velocityΔt is the change in timeChange in angular velocity of the wheel is calculated as follows;
[tex]\Delta \omega = 2 \ \frac{rev}{s} \times \frac{2\pi \ rad}{1 \ rev} = 4\pi \ rad/s = 12.57 \ rad/s[/tex]
Change in time, Δt = 1 min = 60 s
The angular acceleration of the rotating wheel is calculated as follows;
α = (12.57) / (60)
α = 0.21 rad/s²
Thus, the angular acceleration of the rotating wheel at the given rate of change of angular velocity is 0.21 rad/s².
Learn more about angular acceleration here: https://brainly.com/question/25129606
Which property of the water molecule causes two water molecules to be attracted to each other? (2 points)
Polar bonds between H and O atoms
Ionic bonding between water molecules
Hydrogen bonds between H atoms
Ionic bonding between O atoms
Answer:
hydrogen bonding between H atoms.
Explanation:
A round tube weighs 30 lbs. If the tube is stood on end it pushes down on the floor with a pressure of
2 lbs/in?. How many square inches is the end of the tube?
Answer:
15in2
Explanation:
The diagram shows part of a radio antenna.The plastic tube protects the radio antenna from bad weather.Dust particles carried by the wind rub against the plastic tube.After some time, the dust particles cause the tube to become positively charged.State the property of plastic that allows it to become electrostatically charged.
Have a good day!! :>
Two wave pulses move toward each other along a rope. two small triangular crests moving toward each other. which diagram shows the resulting wave when they cross at point x? a straight line. a triangular crest. a rectangular crest. a triangular trough.
The triangular crest. shows the resulting wave when they cross at a point x. The meeting point of two waves is known as wave interference ia x.
What is wave pulse?A wave pulse is a short, non-periodic wave that is formed by a single energy input rather than a continuous or repeated energy input.
Wave interference is the result of multiple waves interacting. There are two types of interference: constructive and destructive.
The relative displacement of the waves is the difference between the two. Wave beats are frequently caused by wave interference.
Hence the triangular crest. shows the resulting wave when they cross at a point x.
To learn more about the wave pulse refer to the link;
https://brainly.com/question/1291549
Answer:
B
Explanation:
Got it right on edge
Use F = 1/T as your basis:
10. A stroboscope is set to flash every 8.00×10−5s. What is the frequency of the flashes?
The answer is 12,500 Hz but please show your work.
Now
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{8\times 10^{-5}}[/tex]
[tex]\\ \rm\rightarrowtail \nu=0.125(10^5)[/tex]
[tex]\\ \rm\rightarrowtail \nu=12500s^{-1}[/tex]
[tex]\\ \rm\rightarrowtail \nu=12500Hz[/tex]
The game starts with the serve on the left side of the court.
O
True
O
False
Answer:
Explanation:
well it depends what game are you talking about
project: weather forcasting
Instructions
Click the links to open the resources below. These resources will help you complete the assignment. Once you have created your file(s) and are ready to upload your assignment, click the Add Files button below and select each file from your desktop or network folder. Upload each file separately.
B that is the correct answer
3. Barrett was working in his shop on a truck. Suddenly something exploded and sent his wrench flying across
the shop at 25m/s and it took the wrench 5 seconds to get from one side of the garage to the other. What wa
the distance Barrett's wrench traveled during the explosion?
Answer:
125 meters
Explanation:
we know that
v × t = d
v = 25
t = 5
so the distance should be 5 × 25
answer is 125 meters
Brody drives 180 km in two hours. How fast is he travelling?
should be in km/hour)
Answer:
90 km/h
Explanation:
we just divide the distance by the time to get the speed.
An object moving in the xy-plane is subjected to the force f⃗ =(2xyı^ 3yȷ^)n, where x and y are in m
The magnitude of the work done by force experience by the object is (2a²b + 3b²)J.
Work done by the force experienced by the objectThe magnitude of the work done by force experience by the object is calculated as follows;
W = f.d
where;
F is the applied force (2xyi + 3yj), where x and y are in metersd is the displacement of the object = (a, b)The work done by the force is determined from the dot product of the force and the displacement of the object.
F = (2xyi + 3yj).(a + b)
W = (2abi + 3bj).(ai + bj)
W = (2a²b + 3b²)J
Thus, the magnitude of the work done by force experience by the object is (2a²b + 3b²)J.
The complete question is below:
The particle moves from the origin to the point with coordinates (a, b) by moving first along the x-axis to (a, 0), then parallel to the y-axis.
How much work does the force do?
Learn more about work done here: https://brainly.com/question/8119756
The total work done for an object moving in the xy-plane is subjected to the force f⃗ =(2xyı^ 3yȷ^)n, where x and y are in m is 3ab N.
What is work done?Work done is the force applied on a body to move it over a distance. Work done for inclined plane can be given as,
[tex]W=F\times d[/tex]
Here (F) is the magnitude of force and (d) is the distance traveled.
An object moving in the xy-plane is subjected to the force
[tex]\vec f =(2xy\hat i +3y\hat j)[/tex]
Here, x and y are in meter.
The particle moves from the origin to the point with coordinates (a, b) by moving first along the x-axis to (a, 0), then parallel to the y-axis.
(a) How much work does the force do?For the first part, the particle moves along x-axis. It moves zero along x-axis. Thus, the force, as y=0.
[tex]W_1=\int\limits^a_0 {2xy\hat i} \, dx =0\\[/tex]
Now, when the object moves along y-axis,
[tex]W_2=\int\limits^a_0 {3y\hat j} \, dx \\W_2=3\int\limits^b_0 {y\hat j} \, dx\\W_2=3y(a-0)\\W_2=3ba\\W_2=3ab[/tex]
Total work done,
[tex]W=0+3ab\\W=3ab\rm\; N[/tex]
Thus, the total work done for an object moving in the xy-plane is subjected to the force f⃗ =(2xyı^ 3yȷ^)n, where x and y are in m is 3ab N.
Learn more about the work done here;
https://brainly.com/question/25573309
#SPJ4
The inner planets are different from the outer planets mainly because they are:.
Answer:
The inner planets are closer to the Sun and are smaller and rockier. The outer planets are further away, larger and made up mostly of gas. The inner planets (in order of distance from the sun, closest to furthest) are Mercury, Venus , Earth and Mars.
Explanation:
Find the kinetic energy k of the block at the moment labeled b. express your answer in terms of k and a.
The position of the object can be used to find the kinetic energy in terms of k and a.
What is kinetic energy?The term kinetic energy refers to the energy of an object that is in motion. The question is incomplete hence the syetem is not shown and the value of the kinetic energy can not be found in terms of k and a.
Hence, when the system is shown, we can look at the position of the system and use it to obtain the value of the kinetic energy in terms of k and a.
Learn more about kinetic energy: https://brainly.com/question/12669551
Answer:
K = 3/8k(A)^2
Explanation: Potential Energy --> Conservation of Energy
Because block B is at A/2, U = 1/2k(A/2)^2 which equals U = 1/8k(A)^2.
Now that you have the equation for potential energy, you can find kinetic energy in terms of the spring constant (k) and amplitude (A).
K = 3/8 k A^2
A fish swimming at a constant speed of 0.5 m/s suddenly notices a shark
appear behind it. Five seconds later, the fish is swimming in the same
direction at a speed of 3.5 m/s. Calculate the fish's acceleration?
PLEASE HELP <33
A car initially travels at 10 m/s when passing the "acceleration line". The car then accelerates Q. at 8m/s2 until reaching a final velocity of 40 m/s. What is the car's displacement during the acceleration?
answer choices
3.75 m
93.75 m
100 m
1590 m
[tex]\text{Given that,}\\\\\text{Initial velocity,}~ u = 10 ~ms^{-1}\\\\\text{Final velocity,}~ v = 40 ~ ms^{-1}\\\\\text{Acceleration,}~ a = 8 ~ ms^{-2}\\ \\\text{Time ,}~ t =?\\\\\text{Displacement, }~ s = ?\\\\\text{We know that,}\\\\a= \dfrac{v-u}{t}\\ \\\implies t = \dfrac{v-u}{a} = \dfrac{40-10}{8} = \dfrac{30}{8} = 3.75 ~sec \\\\s=\left(\dfrac{u+v}2\right)t=\left(\dfrac{10+40}2 \right)3.75 = \left(\dfrac{50}{2}\right)3.75 = 25 \times 3.75 = 93.75~m[/tex]
[tex]\text{Hence, the displacement of the car is 93.75 m}[/tex]
Why did astronomers suspect an eighth planet beyond uranus? how did they determine where to look for it? construct the correct explanation.
drag the terms on the left to the appropriate blanks on the right to complete the sentences.
brightness - mass - orbit - position - kepler's third law - value - law of gravity
observation of uranus showed small but significant discrepancy between its predicted ______ and its actual ________ , which could mean that another object perturbed its motion.
in the mid-1800s, astronomers used the ________ to predict where a planet would have to be.
Astronomers suspected an eighth planet beyond Uranus because of the irregularities in the motion of Uranus suggested that gravity from another planet was affecting it.
Who is an astronaut?It should be noted that an astronaut simply means an individual who is trained to travel in spacecrafts.
In this case, astronomers suspected an eighth planet beyond Uranus because of the irregularities in the motion of Uranus suggested that gravity from another planet was affecting it.
In mid-1800s, astronomers used the orbits of most asteroids to predict where a planet would have to be.
Learn more about astronaut on:
https://brainly.com/question/2314879
Suppose that a simple pendulum consists of a small 60.0 g bob at the end of a cord of negligible mass. If the angle 0 between the cord and the vertical is given by g - (0.0800 rad) cos[(4.43 rad/s) t 0], what are (u) the pendulum's length and (b) its maximum kinetic energy
Based on the mass of the bob and the angle between the cord and the vertical, the pendulum length is 0.50m.
The maximum kinetic energy can be found to be 9.42 x 10⁻⁴J.
What is the pendulum length?This can be found as:
= g-force / w²
Solving gives:
= 9.8 / 4.43²
= 0.4998 m
= 0.50 m
What is the maximum kinetic energy?This can be found as:
= 0.5 × m × w² × A²
Maximum kinetic energy is:
= 0.5 × 60 × 10⁻³ × (4.43 × 0.4998 x 0.08 rad)²
= 9.42 x 10⁻⁴J
Find out more on maximum kinetic energy at https://brainly.com/question/24690095.
Can you hear the vibrations a tuning fork puts off when hit?
no
Explanation:
no not an vibration signal
How are physical descriptions and physical properties similar?
Answer:
A physical property and physical description are similar because the changes in a physical property of a system can be used to describe its changes between momentary states.
A physical property is is defined as any property that is measurable, and also whose value describes a state of a physical system.
Examples of physical properties include;
density,
hardness,
melting and boiling points, and
thermal conductivity
A physical description is observed physical properties usually represented by a specific class, compound or elements.
Both physical property and physical description are similar because the changes in a physical property of a system can be used to describe its changes between momentary states.
Answer:
A physical property is a characteristic of a substance that can be observed or measured without changing the identity of the substance. Physical properties include color, density, hardness, and melting and boiling points. A chemical property describes the ability of a substance to undergo a specific chemical change.
How much energy does a pair of hair straighteners transfer every second
Answer:
It depends...
Explanation:
If you know how much watts the pair of hair straighteners use, you can use that as the energy every second. A normal flat iron for hair would be 300 watts, so we could say that it uses 300 jolts or watts of energy per second.
Hello people ~
The sound in the audible range is called
(a) ultrasonic sound
(b) sonic sound
(c) subonic sound
(d) light sound
Answer:
Sonic sound
Human audible range is from 20Hz to 20000Hz or 20kHzAbove or beneath that range we can't hear .Bats can hear below it and dogs can hear above itCollette is twisting a screwdriver. The scredriver has a handle with a radius of 18 mm. If she is exerting a force of 14 N, how much torque is she causing? PLEASE HELPPP!!!!
A. 25 Nm
B. 0.25 Nm
C. 1.3 Nm
D 0.75 Nm
Torque:-
[tex]\\ \rm\Rrightarrow \tau =14(0.018)[/tex]
[tex]\\ \rm\Rrightarrow \tau=0.25Nm[/tex]
option B
A car initially travels west with a kinetic energy of 10 J. Then it travels east at three times its original speed. What is its kinetic energy when it is traveling east
KE₁ = 1/2mv²
10 J = 1/2mv²
KE₂ = 1/2m(3v)²
KE₂ = 1/2mv².9
KE₂ = 10 . 9 = 90 J
An apple weighing 1 N fall a distance of 1 m how much work is done on the Apple by the force of gravity
Explanation:
work = Force×distance
Force in this question is equal to the weight (force of gravity)
work = 1 × 1 = 1 J
Jole is the unit of work
A man pushes a 8 kg object. A distance of 5. 0 m upward along a frictionless slope that makes an angle of 30° with the horizontal. His force is parallel to the slope. If the speed of the object decreases at a rate of 1. 5 m/s, then the work done by the man is:
Answer:
is 200 J
Explanation:
hope this is the right answer
When do things move faster? Day or night?
I believe most activity takes place during daylight hours.So the life move fast in day. If we talk about the -Sound. At night , the air is denser due to humidity (obviously nights are cooler). sound requires medium to travel and so DENSER the medium,FASTER the sound travels.
Please help asap its for anatomy
explain the basic mechanical process through which micturition occurs, including an explanation of why someone might not be able to "hold it in" any longer if they wait too long to urinate and why it might be harder for older people to hold their urine for a long time
The smooth muscle in the wall of the bladder when stretched triggers the micturition reflex (urination).
What is a Bladder?This is defined as a lined layers of muscle tissue that stretch to hold urine in organisms.
In older people the elasticity of the bladder is reduced which is why it makes it harder for them to hold urine for a long time.
Read more about Micturition here https://brainly.com/question/26493943