The water in a fast-moving river causes rocks to bump and scrape against one another. What will happen to these rocks over time?

In air, sound travels at a computed speed of 340 m/s.

The speed of sound in air is influenced by a number of factors, including temperature, humidity, and atmospheric pressure. However, under normal atmospheric conditions—a temperature of 20 degrees Celsius or 68 degrees Fahrenheit, a relative humidity of 50%, and a pressure of one atmosphere—the speed of sound in dry air is around 343 metres per second (1,125 feet per second). This number is typically rounded to 340 m/s for convenience.

Speed is the pace at which a distance changes in relation to time. v = dx + dt, etc. Speed may also be described as a function of time and distance. Specifically, speed is equal to distance times time. Its symbol is v, and the SI unit for it is m/s. It has a scalar value. Speed is a measure of how far something can go in a given amount of time. Using the formula Speed = Distance Time, one may determine the dimension of speed. Distance is measured in units of [L1], while time is measured in units of [T1]. Dividing distance by time results in [L1] [T1] = [L1T1]. [L1T]1 is the dimension for speed.

To know more about Sound :

https://brainly.com/question/30045405

#SPJ1.

The neutron number of an atom X, which undergoes alpha, and beta decay reduces the neutron number by 6.  

Alpha decay is the nuclear process in which the parent nucleus emits an alpha or helium particle to form a daughter nucleus. When a particle emits an alpha nucleus, the nucleus loses its two protons and two neutrons. Beta decay is the nuclear process in which the parent nucleus undergoes the emission of electrons to produce a daughter nucleus.

Alpha decay decreases the atomic mass number decreases by 4 and the atomic number decreases by 2. In beta decay, the neutron is converted into a proton and the atomic number decreases by one. The neutron number is affected by alpha decay.

From the given,

X atom undergoes alpha decay. X -----> ₐ₋₂Xᵇ⁻⁴ + He₂⁴. The neutron number decreases by two.  ₐ₋₂Xᵇ⁻⁴ ----->    ₐ₋₂₋₂Xᵇ⁻⁴⁻⁴ + He₂⁴. The neutron number decreases by two.

When the X atom undergoes beta decay, ₐ₋₄Xᵇ⁻⁸---> ₐ₋₅Xᵇ⁻⁸ + ₋₁e⁰. The neutron number does not get affected. When the atom again undergoes alpha decay,  ₐ₋₅Xᵇ⁻⁸ ----->  ₐ₋₇Xᵇ⁻¹². Thus, the neutron number decreases by 6 when the atom undergoes three alpha decay.

To learn more about nuclear decay:

https://brainly.com/question/21114779

#SPJ1

Explanation:

The satement that can be made about sound wave A and sound wave B is, they will slow down.

Relationship between sound wave and temperature

The relationship between sound waves and temperature is given by the following formula;

v= √γRT

The speed of sound wave increases with increase in temperature, and vice versa.

Speed of sound wave in liquid and gaseous medium

Sound wave is mechanical wave, because it requires material medium for its propagation. Sound will travel faster in liquid medium than gaseous medium because of number of molecules per unit volume.

Thus, the satement that can be made about sound wave A and sound wave B is, they will slow down.

The overall energy of the biker at the midpoint of the hill is 12,702.5 joules (J).

To determine the overall energy of the biker, we need to consider both the kinetic energy and potential energy at the midpoint of the hill.

1. Kinetic Energy:

The kinetic energy (KE) of an object is given by the formula:

KE = 1/2 * mass * velocity^2

Substituting the values:

Mass (m) = 55 kg

Velocity (v) = 13 m/s

KE = 1/2 * 55 kg * (13 m/s)^2

KE = 1/2 * 55 kg * 169 m^2/s^2

KE = 1/2 * 55 kg * 169 m^2/s^2

KE = 1/2 * 9235 kg·m^2/s^2

KE = 4617.5 J

2. Potential Energy:

The potential energy (PE) of an object is given by the formula:

PE = mass * gravitational acceleration * height

Substituting the values:

Mass (m) = 55 kg

Gravitational acceleration (g) = 9.8 m/s^2

Height (h) = 15 m

PE = 55 kg * 9.8 m/s^2 * 15 m

PE = 8085 J

3. Overall Energy:

The overall energy (E) is the sum of the kinetic energy and potential energy:

E = KE + PE

E = 4617.5 J + 8085 J

E = 12702.5 J

For more such questions on biker,click on

https://brainly.com/question/28666728

#SPJ8  

Wavelength and frequency are the two main Characteristics of the wave remain the same. Frequency and wavelength reflects off a hard stationary surface.

Thus, A wave is a dynamic disturbance that propagates and causes one or more quantities to depart from equilibrium. Quantities may oscillate regularly around an equilibrium (resting) value at certain frequency if a wave is periodic.

A traveling wave is one in which the entire waveform moves in one direction; in contrast, a standing wave is one in which two periodic waves are overlaid and move in the opposing directions.

In a standing wave, there are some points where the wave amplitude seems reduced or even zero, and these positions have null vibration amplitudes.

A wave equation (standing wave field comprising two opposing waves) or a one-way wave equation (for single wave propagation in a certain direction) is frequently used to describe waves.

Thus, Wavelength and frequency are the two main Characteristics of the wave remain the same. Frequency and wavelength reflects off a hard stationary surface.

Learn more about Wavelength, refer to the link:

https://brainly.com/question/12651637

#SPJ1

To find the acceleration of the electron in the given electric field, we can use the equation of motion for a charged particle in an electric field.

Given:

Initial velocity of the electron, v_initial = 1 × 10^6 m/s (in the x-direction)

Electric field, E~ = (360 N/C) ˆj (in the y-direction)

Fundamental charge, e = 1.602 × 10^(-19) C

Mass of the electron, m = 9.109 × 10^(-31) kg

The force experienced by a charged particle in an electric field is given by the equation:

F~ = qE~

Where:

F~ is the force vector,

q is the charge, and

E~ is the electric field vector.

Since the electron has a negative charge, the force vector F~ will be in the opposite direction of the electric field vector E~.

The force acting on the electron can be calculated as:

F~ = -qE~

Substituting the values:

F~ = -(1.602 × 10^(-19) C) × (360 N/C) ˆj

Now, we can use Newton's second law of motion, F~ = ma~, to find the acceleration of the electron.

Since the force acting on the electron is in the y-direction (opposite to the electric field direction), and the mass of the electron is known, we have:

F_y = ma_y

Substituting the force in the y-direction:

-(1.602 × 10^(-19) C) × (360 N/C) = (9.109 × 10^(-31) kg) × a_y

Solving for a_y:

a_y = -[(1.602 × 10^(-19) C) × (360 N/C)] / (9.109 × 10^(-31) kg)

Calculating the value:

a_y ≈ -6.56 × 10^11 m/s^2

The acceleration of the electron is approximately -6.56 × 10^11 m/s^2 in the y-direction. Note that the negative sign indicates that the acceleration is opposite to the direction of the electric field, as expected for a negatively charged particle.

The resulting capacitance in a series connection of two identical capacitors is half the value of each individual capacitor. the equivalent capacitance of the circuit is=0.8µF. the equivalent capacitance of the circuit will be 16µF.

(a) When two identical capacitors are connected in series, the resulting capacitance is less than that of each individual capacitor. In a series configuration, the capacitors share the same charge, but the voltage across each capacitor adds up. The total charge stored in the series combination remains the same as that of a single capacitor, but the voltage is divided between the two capacitors. This leads to a lower effective capacitance.

Mathematically, if C1 and C2 are the capacitances of the individual capacitors, the formula for the equivalent capacitance (Cs) in a series connection is given by:

1/Cs = 1/C1 + 1/C2

Since C1 = C2 in this case (identical capacitors), the formula simplifies to:

1/Cs = 1/C1 + 1/C1 = 2/C1

Rearranging the equation, we find:

Cs = C1/2

So, the resulting capacitance in a series connection of two identical capacitors is half the value of each individual capacitor.

(b) (i) In the given circuit with five capacitors of equal capacitance 4µF, connected in a series configuration, we can find the equivalent capacitance (Ce) using the same formula as mentioned above for series connection:

1/Ce = 1/C1 + 1/C2 + 1/C3 + 1/C4 + 1/C5

Since all the capacitors are of equal capacitance, we can simplify the equation as follows:

1/Ce = 1/4µF + 1/4µF + 1/4µF + 1/4µF + 1/4µF

= 5/4µF

Taking the reciprocal of both sides of the equation, we find:

Ce = 4µF/5

Therefore, the equivalent capacitance of the circuit is 4µF/5 or 0.8µF.

(ii) If the circuit is broken at the right of X, it means that the last capacitor (C5) is no longer connected. In a series configuration, removing a component breaks the circuit, and thus the current does not flow through the open circuit. In this case, the equivalent capacitance of the circuit will be the sum of the capacitances of the remaining capacitors:

Ce = C1 + C2 + C3 + C4 = 4µF + 4µF + 4µF + 4µF = 16µF.

Therefore, if the circuit is broken at the right of X, the equivalent capacitance of the circuit will be 16µF.

Know more about capacitor here:

https://brainly.com/question/21851402

#SPJ11

using the screw rule, the direction of the magnetic field at the center of the square loop can be determined based on the direction of rotation of an imaginary right-handed screw inserted along the perpendicular axis of the loop.

The concept of the screw rule, also known as the right-hand screw rule, can also be used to determine the direction of the magnetic field at the center of a square loop.

The screw rule states that if you align the screw axis with the direction of current flow (conventional current), then the direction of rotation of the screw represents the direction of the magnetic field lines.

In the case of a square loop carrying current, imagine inserting a right-handed screw into the center of the loop along the perpendicular axis. If you rotate the screw in the direction of the current flow around the loop, the direction of the magnetic field lines will be the same as the direction in which the screw would advance.

For example, if the current flows in a clockwise direction around the square loop, when you turn the screw clockwise, it will advance into the loop. This indicates that the magnetic field at the center of the square is directed into the loop.

On the other hand, if the current flows counterclockwise around the square loop, when you rotate the screw counterclockwise, it will appear to come out of the loop. This suggests that the magnetic field at the center of the square is directed outward from the loop.

Therefore,The direction of rotation of an imaginary right-handed screw inserted along the perpendicular axis of the loop can be used to estimate the direction of the magnetic field at the centre of the square loop using the screw rule.

To learn more about magnetic fields click:

brainly.com/question/23096032

#SPJ1

The statement "The magnetic field inside a solenoid is circular in the same direction as the current" escribes the direction of the magnetic field inside the solenoid.

By definition, a magnetic field denotes the specific region encircling either a magnet itself, an electrical current running through an object or even changes made to said current that can ultimately result in observable manifestations of magnetic forces.

Any charged particles finding themselves coursing through said space will experience tangible sizeable forces running perpendicular but not parallel to their velocity and direction of travel respectively.

Lastly in regards to permanent magnets specifically; they exhibit properties like drawing in ferromagnetic elements like iron close-by while also playing host to mutual attraction or repulsion with other magnets.

Learn about magnetic field here https://brainly.com/question/14411049

#SPJ1

The speed calculated using the formula for any pair of neighboring dots will vary depending on the distance and time between those dots, and it may or may not be the same as the average speed calculated in part F.

If we use the formula speed = distance ÷ time between any pair of neighboring dots, it is likely that the speed calculated will be different from the average speed calculated in part F. This is because the average speed takes into account the total distance traveled and the total time taken, whereas the speed calculated between any pair of neighboring dots only takes into account the distance and time between those specific dots.
For example, if there are two dots A and B, and the distance between them is 10 meters and the time taken to travel from A to B is 5 seconds, the speed calculated using the formula would be 2 meters per second. However, if there are three dots A, B, and C, and the distance between A and B is 10 meters, and the distance between B and C is also 10 meters, and the time taken to travel from A to C is 10 seconds, the average speed would be 2 meters per second, but the speed calculated between A and B or between B and C would be 2 meters per second.
Therefore, the speed calculated using the formula for any pair of neighboring dots will vary depending on the distance and time between those dots, and it may or may not be the same as the average speed calculated in part F.

for more such question on speed

https://brainly.com/question/13943409

#SPJ11

Answer: The force that pushes a plane upwards is the lift generated by the wings as the plane moves through the air. The lift force is created by the difference in air pressure above and below the wings, which creates an upward force that opposes the weight of the plane.

When the brakes are applied to a moving vehicle, the type of energy transfer that occurs is the conversion of kinetic energy to thermal energy.

Kinetic energy is the energy of motion, while thermal energy is the energy related to temperature and heat. As the vehicle moves, it has kinetic energy due to its motion. When the brakes are applied, friction is created between the brake pads and the brake rotors (or drums), which opposes the motion of the vehicle. This friction causes the kinetic energy of the moving vehicle to be converted into thermal energy as heat.

The heat generated from this process is then dissipated into the surrounding environment, ultimately bringing the vehicle to a stop. The energy transfer produced when brakes are applied involves converting kinetic energy into thermal energy through the process of friction. This transformation allows the vehicle to slow down and eventually come to a complete stop.

know more about kinetic energy here:

https://brainly.com/question/30337295

#SPJ11

Explanation:

The laser cauterizes as it cuts thus reducing blood loss.

Answer:

D

Explanation:

The option D is an example of chemical energy. Chemical energy is a form of potential energy stored in the bonds of molecules. In this case, the energy in the apple is stored in the form of chemical bonds within its molecules. When a worm eats the apple, it breaks down these chemical bonds through digestion, releasing the stored energy as a source of fuel for the worm's biological processes.

Answer:

Explanation:

(a) To find the acceleration, we can use the equation of motion:

v = u + at

Where:

v = final velocity = 1.29 m/s

u = initial velocity = 0.10 m/s

a = acceleration (unknown)

t = time = 38 ms = 0.038 s

Rearranging the equation, we have:

a = (v - u) / t

Plugging in the values, we get:

a = (1.29 - 0.10) / 0.038

a = 1.19 / 0.038

a ≈ 31.32 m/s²

Therefore, the acceleration reflected in the data is approximately 31.32 m/s².

(b) To find the distance traveled, we can use the equation of motion:

s = ut + (1/2)at²

Where:

s = distance traveled (unknown)

u = initial velocity = 0.10 m/s

t = time = 38 ms = 0.038 s

a = acceleration = 31.32 m/s²

Plugging in the values, we get:

s = (0.10 × 0.038) + (0.5 × 31.32 × 0.038²)

s ≈ 0.0038 + 0.0565

s ≈ 0.0603 meters

Therefore, the blood travels approximately 0.0603 meters during this period.

Answer:

0.002 m

Explanation:

We can use the equations of motion to solve this problem.

(a) The initial velocity of the blood is u = 0.10 m/s, the final velocity is v = 1.29 m/s, the time taken is t = 38 ms = 0.038 s, and the acceleration is a (which is what we want to find). The equation that relates these quantities is:

v = u + at

Rearranging this equation, we get:

a = (v - u) / t = (1.29 - 0.10) / 0.038 = 33.68 m/s^2

Therefore, the acceleration of the blood is 33.68 m/s^2.

(b) To find the distance traveled by the blood during this period, we can use another equation of motion:

s = ut + (1/2)at^2

where s is the distance traveled. Substituting the values we have:

s = (0.10)(0.038) + (1/2)(33.68)(0.038)^2 = 0.002 m

Therefore, the blood travels a distance of 0.002 m during this period.

longitudinal and transverse waves exhibit similarities in terms of their lack of significant movement and non-transport of matter. However, their fundamental distinction lies in the orientation of particle oscillations and the direction of energy transfer: parallel for longitudinal waves and perpendicular for transverse waves.

Longitudinal waves and transverse waves share certain similarities but also exhibit distinct characteristics in terms of their movement and energy transfer.

Both types of waves propagate through a medium but differ in the orientation of their oscillations and the direction of energy transfer.

Longitudinal waves move particles of the medium parallel to the direction of wave propagation. As the wave travels, the particles oscillate back and forth along the same axis as the wave's motion.

Examples of longitudinal waves include sound waves, where air particles vibrate parallel to the direction of the sound wave, creating areas of compression and rarefaction.

In contrast, transverse waves exhibit oscillations perpendicular to the direction of wave motion. The particles in the medium move up and down or side to side, perpendicular to the wave's propagation.

Examples of transverse waves include electromagnetic waves, such as light waves or radio waves, where the electric and magnetic fields oscillate perpendicular to the direction of wave travel.

For more such questions on transverse waves,click on

https://brainly.com/question/15531840

#SPJ8      

Across

2. opaque

4. hard

5. metal(s)

6. translucent

8. luster

Down

1. wood

3. transparent

7. soluble?

Happy to help, have a great day! :)

Cellular respiration is a highly efficient process that allows cells to convert the energy stored in glucose into ATP, the main energy currency of the cell. This process is essential for the survival and function of all living organisms.

The reaction involved in cellular respiration is a complex process that involves the breakdown of glucose molecules in the presence of oxygen to release energy in the form of ATP. This process is called aerobic respiration and takes place in the mitochondria of eukaryotic cells.
The first step of cellular respiration is glycolysis, which occurs in the cytoplasm of the cell. During glycolysis, glucose is broken down into two pyruvate molecules, releasing a small amount of ATP and NADH. Pyruvate is then transported into the mitochondria, where it is converted into acetyl-CoA by the enzyme pyruvate dehydrogenase.
The next step is the Krebs cycle, also known as the citric acid cycle. During this process, acetyl-CoA is broken down into carbon dioxide, producing a large amount of ATP, NADH, and FADH2.
Finally, the electrons carried by NADH and FADH2 are used to produce ATP through oxidative phosphorylation in the electron transport chain. Oxygen acts as the final electron acceptor, combining with hydrogen ions to produce water.
Overall, cellular respiration is a highly efficient process that allows cells to convert the energy stored in glucose into ATP, the main energy currency of the cell. This process is essential for the survival and function of all living organisms.

for more such question on Cellular respiration

https://brainly.com/question/8243126

#SPJ11

The wavelength of light that should be used to obtain fringes that are 0.0045 m wide after reducing the distance between the screen and the slit by half is 2.25 * 10^7 Å.

Huygens's Principle states that every point on a wavefront can be considered as a source of secondary spherical wavelets that spread out in all directions with the same speed as the original wave. The new wavefront is formed by the envelope of these secondary wavelets at a later time.

Now, let's consider a Young's double-slit experiment. In this experiment, when light passes through two narrow slits, it creates an interference pattern on a screen behind the slits. The fringe width is the distance between two consecutive bright or dark fringes in the pattern.

Given that the fringe width obtained is 0.6 cm and the wavelength of light used is 4500 Å (Angstroms), we can calculate the wavelength of light required to obtain fringes that are 0.0045 m wide.

We can use the formula for fringe width in Young's double-slit experiment:

w = (λ * D) / d

Where:

w is the fringe width,

λ is the wavelength of light,

D is the distance between the screen and the double slits, and

d is the distance between the two slits.

Let's calculate the value of D/d using the given information:

D/d = w / λ

= 0.006 m / 4500 Å (1 m = 10^10 Å)

= 0.006 * 10^10 / 4500 m^-1

Now, if the distance between the screen and the slit is reduced by half, the new value of D/d would be:

(D'/d) = (0.006/2) * 10^10 / 4500 m^-1

Now, we can rearrange the equation to solve for the new wavelength (λ'):

(λ' * D') / d = (D/d)

λ' = (D/d) * d / D

= [(0.006/2) * 10^10 / 4500] * (4500 / 0.006) Å

= 0.0045 m * 10^10 / 2 Å

= [tex]0.00225 * 10^{10[/tex] Å

=[tex]2.25 * 10^7[/tex]Å

For more such questions on wavelength

https://brainly.com/question/10728818

#SPJ11

The statement that best explains how sonar technology uses wave behavior is sonar technology relies on reflected waves to measure distance.

option B

Sonar stands for Sound Navigation And Ranging, which means it uses sound waves to navigate and locate objects underwater. The sonar device sends out a sound wave, which travels through the water until it encounters an object. When the sound wave hits the object, it reflects back to the sonar device, where it is detected.

By measuring the time it takes for the sound wave to travel to the object and back, sonar technology can determine the distance between the object and the sonar device. This process is based on the principle of wave reflection, which is when a wave bounces back after hitting a surface.

Learn more about sonar here: https://brainly.com/question/14090821

#SPJ1

Answer:

C. The number of protons an atom has defines what kind of element it is.

D. The basic unit of matter is the atom.

are the correct statements.

A is incorrect because the atomic number is the number of protons in an atom, which is different for different elements.

B is incorrect because an element is defined by the number of protons it has in its nucleus (which determines its atomic number), not the number of neutrons.

Explanation:

Answer:

The total work of the system is 175 J.

The formula for work is W = F * d, where F is the force and d is the distance. In this case, the force is 50 N and the distance is 5 m. Therefore, the total work is 175 J.

Note that the friction force is not doing any work, because it is acting in the opposite direction of the displacement.

The arrangement of force and motion on the ball bearing shown in the diagram suggests that the ball bearing will move in a circular or curved path

The arrangement of force and motion on the ball bearing shown in the diagram suggests that the ball bearing will move in a circular or curved path. This is because the forces acting on the ball bearing are not aligned in a straight line, but are instead directed at an angle, causing the ball bearing to change direction as it moves. Specifically, the upward force from the ramp and the forward force from the moving conveyor belt combine to produce a resultant force that is directed at an angle towards the upper right corner of the image. This causes the ball bearing to move in a curved path towards that corner. However, the exact pattern of motion will depend on the specific details of the forces and the geometry of the system. Factors such as the speed of the conveyor belt, the angle of the ramp, and the friction between the ball bearing and the surfaces it encounters will all influence the resulting motion of the ball bearing.

For more question on force

https://brainly.com/question/12785175

#SPJ11

Answer: The frequency of yellow light is greater that blue light

Explanation: Hope this helps :)

Answer: you have to divide and multiple fam

Explanation:

(a) The coefficient of static friction is 0.51.

(b) The magnitude of the force required to make the two blocks start to move is 69.9 N.

(a) To determine the coefficient of static friction between the 2.0-kg block and the horizontal floor, we need to use the formula F_s = μ_sN, where F_s is the force of static friction, μ_s is the coefficient of static friction, and N is the normal force. Since the block is at rest, the force of static friction must be equal in magnitude and opposite in direction to the applied force of 10.0 N. Thus, F_s = 10.0 N. The normal force, N, is equal to the weight of the block, which is mg, where m is the mass and g is the acceleration due to gravity.

Therefore, N = (2.0 kg)(9.8 m/s^2) = 19.6 N. Substituting these values into the formula, we get 10.0 N = μ_s(19.6 N), which gives μ_s = 0.51.
(b) When the 12.0-kg block is stacked on top of the 2.0-kg block, the normal force acting on the lower block increases. The new normal force, N', is equal to the weight of both blocks, which is (2.0 kg + 12.0 kg)(9.8 m/s^2) = 137.2 N. The force required to make the two blocks start to move is equal to the force of static friction, which is given by F_s = μ_sN'. Substituting the coefficient of static friction from part (a) and the new normal force, we get F_s = (0.51)(137.2 N) = 69.9 N. Therefore, the magnitude of the force required to make the two blocks start to move is 69.9 N.

for more such question on static friction

https://brainly.com/question/25050131

#SPJ11

The radii of the first five Fresnel zones is 3.6 mm.

Distance from the light source to the wave surface, d₁ = 1 m

Distance from the wave surface to the observation point, d₂ = 1 m.

Wavelength of the light used, λ = 5 x 10⁻⁶m = 5 μm

The expression for the radius of the Fresnel zones is given by,

rₙ = √[nλd₁d₂/(d₁ + d₂)]

Therefore, the radii of the first five Fresnel zones is,

r₅ = √[5 x 5 x 10⁻⁶x 1 x 1/(1 + 1)]

r₅ = √(25 x 10⁻⁶/2)

r₅ = 3.6 x 10⁻³m

r₅ = 3.6 mm

To learn more about Fresnel zones, click:

https://brainly.com/question/19672328

#SPJ1

For this circuit, the voltage is 4.2 V. then power given is 0.9 W and receiving across 55Ω resistance is 0.07 W and that of 30Ω resistance is 0.14 W. Resistor are connected in parallel, its equvalent resistance is R₁R₂/R₁+R₂.

Both resistor are connected in parallel hence their equivalent resistance in parallel combination is given as,

R = 55*30/(55+30)

R = 19.4 Ω

Power given to the circuit is,

P = V²/R = 4.2/19.4 = 0.9 W

Receiving power taken from 55Ω resistor

P = V²/R = 4.2/55 = 0.07 W

Receiving power taken from 30Ω resistor

P = V²/R = 4.2/30 = 0.14 W

To know more about Power :

https://brainly.com/question/29869646

#SPJ1.

In the parallel combination, the current through R3 is 3 A. In the series combination, the current through R3 is 0.75 A.

To determine the current through resistor R3 in both the parallel and series combinations, we need to apply Ohm's Law and the appropriate formulas for calculating total resistance and current in each configuration.

First, let's consider the parallel combination:

In a parallel combination, the voltage across each resistor is the same. Therefore, the voltage across R3 is also 90 V.

Using Ohm's Law (V = I × R), we can calculate the current flowing through R3 in the parallel combination:

I_parallel = V / R3

= 90 V / 30 Ω

= 3 A

So, in the parallel combination, the current through R3 is 3 A.

Now, let's consider the series combination:

In a series combination, the total resistance is the sum of the individual resistances:

R_total = R1 + R2 + R3

= 60 Ω + 30 Ω + 30 Ω

= 120 Ω

To find the current through the series combination, we can use Ohm's Law:

I_series = V / R_total

= 90 V / 120 Ω

= 0.75 A

Therefore, in the series combination, the current through R3 is 0.75 A.

For more such questions on parallel combination visit:

https://brainly.com/question/15121871

#SPJ11

Note the complete questions is User

90 V R₁=60 R2=  30, R3 = 30

Based on the circuit above, what would be the current through the R3 resistor in parallel and in series combinantion.

Increasing the pressure raises the boiling point, while decreasing the pressure lowers it.

The boiling point of water is affected by changes in pressure. Generally, as the pressure increases, the boiling point of water also increases, and as the pressure decreases, the boiling point decreases. This relationship is described by the Clausius-Clapeyron equation.

When the pressure is increased, it requires more energy for water molecules to overcome the increased external pressure and escape the liquid phase, resulting in a higher boiling point. Conversely, when the pressure is decreased, less energy is needed for the water molecules to escape, leading to a lower boiling point.

To illustrate this, let's consider a scenario where you increase the pressure on a sample of water. The increased pressure will compress the water molecules and make it more difficult for them to escape as vapor. As a result, the temperature of the water must be raised to a higher level before the vapor pressure matches the external pressure, causing the water to boil.

Conversely, if you decrease the pressure on water, the water molecules will have an easier time escaping as vapor. Therefore, the boiling point will be lower, and the water will boil at a lower temperature.

It's important to note that the relationship between pressure and boiling point is not linear, but exponential. The Clausius-Clapeyron equation provides a more precise way to calculate the boiling point of a substance at different pressures, taking into account the heat of vaporization and other factors.In summary, changes in pressure can affect the boiling point of water. Increasing the pressure raises the boiling point, while decreasing the pressure lowers it.

For more such questions on Boiling point

https://brainly.com/question/1530966

#SPJ11