Answer:
44.6millilitres
Explanation:
Using the general gas law equation as follows:
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (atm)
V1 = initial volume (L)
T1 = initial temperature (K)
P2 = final pressure (atm)
V2 = final volume (L)
T2 = final temperature (K)
According to this question;
V1 = 30mL
T1 = 273K (STP)
P1 = 1 atm (STP)
V2 = ?
T2 = 300K
P2 = 75.0 kPa = 75 × 0.00987 = 0.74atm
Using P1V1/T1 = P2V2/T2
1 × 30/273 = 0.74×V2/300
30/273 = 0.74V2/300
Cross multiply
300 × 30 = 273 × 0.74V2
9000 = 202.02V2
V2 = 9000/202.02
V2 = 44.55
V2 = 44.6millilitres.
How do I find the concentration of hydronium
Answer:
The hydronium ion concentration can be found from the pH by the reverse of the mathematical operation employed to find the pH. [H3O+] = 10-pH or [H3O+] = antilog (- pH) Example: What is the hydronium ion concentration in a solution that has a pH of 8.34? On a calculator, calculate 10-8.34, or "inverse" log ( - 8.34).
Explanation:
Hope it helps!
This is an example of which type of short-term human-induced environmental change?
Answer:
The short term human induced environmental changes are pollution and deforestation. The term deforestation can be defined as the cutting down of trees in huge amount. The reason can be cutting down of trees for human settlement. Pollution can be defined as the undesirable in the environment.
Each time a person walks into a room and tums on a light, a change in energy occurs. What is this change in energy?
electrical energy is converted into light energy
kinetic energy is converted and the potential energy
light energy is converted in mechanical energy
Chemical energy is converted into potential energy
How many valence electrons are there in Se atom?
Answer:
4 valence electrons
Despite the fact that the word silicon has a ubiquitous affiliation with all things electronic, Si itself is not a good electrical conductor. It has 4 valence electrons, meaning that filling its outer shell it can form a very strong lattice with 4 neighboring Si atoms-with no un-bonded electrons remaining
Answer:
The numer of valence electrons is defined as the number of electrons present in the outer most shell of the atom.So, in the case if selenium, there are 6.
The overall electrical charge on a stable element is_____
Answer: the answer is 0
Explanation:A stable atom has a net charge of 0. In other words, it has an equal number of protons and electrons. The positive protons cancel out the negative electrons.
(On the verge of tears)
Calculate the final molarity of a 20mL- 1.3M salt solution after it has been diluted with 100ml water. Use M1V1 =M2V2. Round up answer to
the hundredths. Include unit.
Answer: The final molarity of a 20mL- 1.3M salt solution after it has been diluted with 100ml water is 0.22 M
Explanation:
According to the dilution law,
[tex]M_1V_1=M_2V_2[/tex]
where,
[tex]M_1[/tex] = molarity of stock solution = 1.3 M
[tex]V_1[/tex] = volume of stock solution = 20 ml
[tex]M_1[/tex] = molarity of diluted solution = ?
[tex]V_1[/tex] = volume of diluted solution = (20+100) ml = 120 ml
Putting in the values we get:
[tex]1.3\times 20=M_2\times 120[/tex]
[tex]M_2=0.22M[/tex]
Therefore the final molarity of a 20mL- 1.3M salt solution after it has been diluted with 100ml water is 0.22 M
what are particles that differ in number between isotopes
Answer:
Isotopes are atoms of the same element that have different numbers of neutrons but the same number of protons and electrons. The difference in the number of neutrons between the various isotopes of an element means that the various isotopes have different masses.
If you can solve both
Will mark brainly
ASAP
Answer:
The main function sis the 2nd one and the substance provides the first 1.
Explanation:
Hope you finish the rest on your own, have fun!
3) Which element has the lowest electronegativity value?
A) F
B) Fr
C) Cr
D) Cl
Answer:
ur mom jk i would say fr
Explanation:
How many grams of potassium chloride are in 4.25 x 1023 molecules?
Do a quick conversion: 1 moles Potassium Chloride = 74.5513 gram using the molecular weight calculator and the molar mass of KCl.
10. If 3.5 kJ of energy are added to a 28.2 g sample of iron at 20°C, what
is the final temperature of the iron in kelvins? The specific heat of iron
is 0.449 J(g•K).
Answer:
569K
Explanation:
Q = 3.5kJ = 3500J
mass = 28.2g
∅1 = 20°C = 20 + 273 = 293K
∅2 = x
c = 0.449
Q = mc∆∅
3500 = 28.2×0.449×∆∅
3500 = 12.6618×∆∅
∆∅ = 3500/12.6618
∆∅ = 276.4220
∅2 - ∅1 = 276.4220
∅2 = 276.4220 + ∅1
∅2 = 276.4220 + 293
∅2 = 569.4220K
∅2 = 569K
When the temperature is increased, there is the increase in thermal energy of the system. The final temperature of the iron in kelvins is 570 K.
What is energy?The energy is the ability to do work.
Given is the energy Q = 3.5 kJ = 3500 J, mass of sample m = 28.2 g, specific heat of iron Cp = 0.449 J(g•K).
The initial temperature in kelvins is T1 = 20°C = 20 + 273 = 293K
The heat is related to the temperature difference as
Q = m c ∆T
Substitute the values into the expression,
3500 = 28.2 × 0.449 × ∆T
3500 = 12.6618 × (T2 -T1)
T2 - T1 = 276.4220
T2 = 276.4220 K +293 K
T2 = 569.4220K
The temperature of the iron is approximately 570 K.
Thus, the final temperature of the iron in kelvins is 570K.
Learn more about energy.
https://brainly.com/question/1932868
#SPJ2
PLEASE HELP ME, EMERGENCY SITUATION (50 points)
207.86 grams of uranium (V) hydroxide reacts with 155.78 grams of thorium disulfate, which is the limiting reactant? You must prove your answer by showing the necessary work and explaining your answer choice.
Answer:
Thorium disulfate
Explanation:
Thorium also forms insoluble compounds with fluoride, sulfate, ... hydroxide from solutions of pH 3.6 or above. ... rate should be about 2.5 g/min, and the reaction tube temperature ... thenoyl group decreases the solubility of the reagent in the aqueous
How much force is required to accelerate a 22 kg mass at 6 m/s2?s
Answer:
F=132k.gm/s^2Explanation:
F=m×af=22k.g×6m/s^2f=132k.gm/s^2how adaptations in a bird's beak help them survive in their environment
Answer:
they can get food easily and they can pack the predators to help them with their safty!♥
PLEASE HELP!
The chemical formula of a compound provides information about the elements present in the compound and their ____
ratios. A) grams B) ratio C) mole D) empirical
Answer:
C. Mole
Explanation:
Chemical formula deals with mole number
A tank containing 5.00 L of nitrogen at 75.0 atm pressure and 28.0 C is left standing in sunlight. Its temperature rises to 50.0C. What is the pressure at this higher temperature?
Answer:
80.5 atm
Explanation:
First of all, we convert 28.0 °C and 50.0 °C into K:
28.0 + 273.16 = 301.16 K50.0 + 273.16 = 323.16 KTo answer this problem we'll use Gay-Lussac's Law, which states that:
T₁*P₂=T₂*P₁In this case:
T₁ = 301.16 KP₂ = ?T₂ = 323.16 KP₁ = 75.0 atmWe put the data:
301.16 K * P₂ = 323.16 K * 75.0 atmAnd solve for P₂:
P₂ = 80.5 atmThus, the correct answer is 80.5 atm.
Consider the equation for the formation of a kidney stone.
2Na3 PO4 (aq) + 3CaCl2 (aq) =
Ca3(PO4)2 (s) + 6NaCl (aq)
Is each reactant bonded ionically or covalently?
How do you know?
Answer:
Ionically, because they are ionic compounds
question above in picture
The reaction between sodium and chlorine that forms table salt is shown
_Na(s) + Cl2 (g) → _NaCl (3)
What coefficient should be added to the blanks to balance the equation?
А.
2
В.
1
2.
2
Answer: 2 Na (s) + Cl(g) -> 2 NaCl (s)
Explanation:
Between what time interval was the object moving the slowest?
Between what time interval was the object moving the fastest
Answer:
from 1 to 2 hour the object was moving the slowestfrom 4 to 5 hours the object was moving the fastestplz help this was due yesterday butttttt i didn’t want to do it...
Answer:
I don't get what you want me to do cause n Explano questions showing ation:
Examine the fossil. List the parts of the animal that you recognize. What kind of animal do you think this was?
Answer:
I think it was a huge fish. umm not sure
Explanation:
Determine the moles of chlorine needed to react with 38.9 of iron (III) chloride.
2 Fe+3 CI, - 2 Feci
Answer: 0.360 moles
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} FeCl_3=\frac{38.9g}{162.2g/mol}=0.240moles[/tex]
The balanced chemical reaction is:
[tex]2Fe+3Cl_2\rightarrow 2FeCl_3[/tex]
According to stoichiometry :
2 moles of require = 3 moles of
Thus 0.240 moles of [tex]FeCl_3[/tex] will require=[tex]\frac{3}{2}\times 0.240=0.360moles[/tex] of [tex]Cl_2[/tex]
Thus 0.360 moles of chlorine needed to react to produce 38.9 of iron (III) chloride.
What are some ways the stars in the photo could be grouped or classified
What are some ways that use physics in your everyday life?
Answer:
Roasting s'mores over a fire.
Ironing the wrinkles out of my shirts.
Wet clothes are dried with the hot air of the dryer.
Small speakers in your headphones use electricity and moving magnets to create sound waves.
Explanation:
The pH of a solution in which the concentration of H+ is 0.010M will be:
A,12
B,2
C,3
D,7
B: 2
If it's right plz give brainliest lol <3
What is the answer?
- What is the percent yield if your actual yield is 39.78g and your theoretical
yield was 47.84 g?
what's a vacuum exactly
Answer:
Vacuum: space in which there is no matter or in which the pressure is so low that any particles in the space do not affect any processes being carried on there It is a condition well below normal atmospheric pressure and is measured in units of pressure (the pascal).-the internet gave me this answer so..
Explanation:
hope this helps :)
What was the average force applied to the brakes of an 825 kg car that took 7.0 s to slow from 32 m/s to 19 m/s?