This carbocation rearranges. Draw the carbocation that is the result of the rearrangement. Include any nonzero formal charges in your drawing.

The maximum amount of energy produced in this reaction is -1381.58J

What is mole?

It is defined as amount of a substance that contains exactly 6.02 × 10²³ ‘elementary entities’ of the given substance.

b) mole ratio = moles / balanced coefficient

mole ratio of Al = 3.25 mol/2 mol= 1.62

mole ratio of Fe2O3 = 1.92 mol/1 mole = 1.92

here , Al is the limiting reactant because of lower nole ratio, therefore it produces maximum amount of heat

Since 2 mole Al produces ∆H° rxn = -850.2J

1 mole Al produces ∆H° rxn = -850.2J/ 2

3.25 mole Al produce ∆H° rxn = (-850.2J/ 2) × 3.25

= -1381.58J

Hence energy ∆H = -1381.58J

learn more about limiting reagent at

https://brainly.com/question/23661051

#SPJ4

The gas after the calculation has a molar mass of 39.95g/mol which is that of Argon. The elemental symbol of gas is Ar.

We know that 1 mol of gas has 22.4L of any gas at STP.

Given in the question is the density of the gas 1.78g/l at STP.

Hence the mass of 22.4 L of the elemental gas at STP is its molar mass.

Hence molar mass

=22.4 l/mol × 1.7824 g/L

= 39.925g/mol

These gases are called noble gases because they are majestic in nature, which means they dont react with anything in general.

To learn more about noble gases, and other chemical compounds,

https://brainly.com/question/11764545

#SPJ4

Answer:

Together, the number of protons and the number of neutrons determine an element’s mass number: mass number = protons + neutrons. If you want to calculate how many neutrons an atom has, you can simply subtract the number of protons, or atomic number, from the mass number. A property closely related to an atom’s mass number is its atomic mass.

Explanation:

Silver is most likely the best conductor of heat according to the periodic table.

The most electrically conductive component is silver, taken after by copper and gold. Silver too has the most elevated warm conductivity of any component and the most noteworthy light reflectance.

The components can be classified as metals, nonmetals, or metalloids. The most electrically conductive component is silver, taken after by copper and gold. Silver too has the most elevated warm conductivity of any component and the most noteworthy light reflectance.

As to why silver is the most excellent conductor, the reply is that its electrons are more liberated to move than those of the other components.

This has got to do with its valence and gem structure. Most metals conduct power. Other components with tall electrical conductivity, are aluminum, zinc, nickel, press, and platinum. Brass and bronze are electrically conductive amalgams, instead of components.

Learn more about silver at

https://brainly.com/question/8071605

#SPJ4

There is a difference in the rate of mass change because eggs gain mass when kept in hypotonic solution, whereas they lose mass when kept in hypertonic solution.

Hypertonic solutions contain high concentrations of solutes compared to other solutions. The opposite solution with a lower concentration is called a hypotonic solution. Cells are considered hypotonic when placed in a hypertonic solution.

Hypotonic solution refers to a solution that contains a lesser amount of solute than the solute concentration of another solution through a semipermeable membrane.

Thus, eggs placed in high concentrations of sucrose lost the most weight. So the higher the sucrose concentration, the more water the egg will lose.

To know more about hypertonic and hypotonic solution visit:

https://brainly.com/question/4237735

#SPJ4

Explanation:

the answer was already on here

The percent ionic character of a bond increases with δen. An arbitrary value of 50% ionic character divides ionic from covalent bonding.

When two or more atoms share one or more couples of electrons, a covalent connection is created. These electrons are being drawn to the two neutrons and protons at the same time. A covalent bond is created when the difference between the two atoms' electrical configurations gets too small for an electrochemical reaction to happen and produce ions.

Bonds between atoms in covalent compounds share electrons. They possess distinctive physical characteristics, such as lower melting temperatures and electrical conductivity contrasted to ionic compounds, as a result of the sharing of electrons.

To know more about Covalent bond visit:

https://brainly.com/question/19382448

#SPJ4

The empirical formula of this compound is ClO₇.

If a 5.00 g sample of a compound containing only chlorine and oxygen contains 1.94 g of chlorine, then the mass of its oxygen is the difference between the mass of the sample and the mass of its chlorine.

mass compound = mass oxygen + mass chlorine

mass oxygen = mass compound - mass chlorine

mass oxygen = 5.00 g - 1.94 g

mass oxygen = 3.06 g

Determine the number of moles of each component by dividing the mass by its respective molar mass.

moles oxygen = mass oxygen / MM

moles oxygen = 3.06 g / 15.9994 g/mol

moles oxygen = 0.1912571721

moles chlorine = mass chlorine/ MM

moles chlorine = 1.94 g / 70.9060 g/mol

moles chlorine = 0.02736016698

Get the ratio between the two components to determine its empirical formula.

moles oxygen : moles chlorine = 0.1912571721 : 0.02736016698

moles oxygen : moles chlorine = 7 : 1

Hence, he empirical formula of this compound is ClO₇.

Learn more about empirical formula here: https://brainly.com/question/9238625

#SPJ4

The longitudinal diffusion a more serious problem in gas chromatography than in liquid chromatography because the diffusion coefficient is much more larger in gas than the liquid.

Chromatography is a type of laboratory technique which is performed for the separation of the mixture of different elements into its components. The mixture firstly dissolved in a fluid solvent which is known as the mobile phase, that carries it through a system at which the material called the stationary phase is fixed.

Not all molecules present in the same solute show same behavior. Different molecules show different behaviour. This is due to mainly three reason which arr given as below:

The molecules of solute moves in different direction in the stationary phase, it is due to porosity of the particle that form it.

Thus, we concluded that the longitudinal diffusion a more serious problem in gas chromatography than in liquid chromatography because the diffusion coefficient is much more larger in gas than the liquid.

learn more about chromatography:

https://brainly.com/question/11960023

#SPJ4

Shaped volumes around the nucleus which are occupied by electrons are called Atomic Orbitals.

The quantum mechanical refinement of Bohr's orbit is an orbital. In contrast to his idea of a straightforward circular orbit with a constant radius, orbitals are regions of space that were calculated analytically and have varying possibilities of hosting an electron. A Quantum Mechanical Description of Electrons Around the Nucleus

#SPJ4

29,322 milliliters of 0.155m hcl are needed to neutralize completely 45.0 ml of 0.101m ba(oh)2 solution Given that :

Hcl + Ba(oh)2 gives Bacl2 + 2h20

Molarity = mole of solute / volume of solution in liters

Molarity = 0.101 m

Volume = 45 ml

mole of solute (ba(0h)2) = Molarity * volume

                = 0.101 * 45 ml

                = 4.545

now we have to find the volume of hcl so,

again

molarity = mol solute/ volume of solution

volume of solution = mole solute / molarity

                                 = 4.545 / 0.155m

                                 = 29. 322 liters

                                 = 29,322 ml

To know more about molarity click here:

https://brainly.com/question/15406534

#SPJ4

Based on the given specific heat capacity of iron, the molar heat capacity of iron =is 25.18 J/mol/°C.

The molar heat capacity of a substance is the amount of heat required to raise the temperature of a unit mole of that substance by one degree.

The molar heat capacity is given by the formula below:

Given the specific heat capacity of a substance, the molar heat capacity is obtained as follows

Molar heat capacity = specific heat capacity * molar mass

specific heat capacity of iron = 0.4498 J/g/°C

the molar mass of iron = 56 g/mol

Molar heat capacity of iron = 0.4498 J/g/°C * 56 g/mol

Molar heat capacity of iron = 25.18 J/mol/°C

Learn more about molar heat capacity at: https://brainly.com/question/15080895

#SPJ1

The reactivities of tert-butyl bromide and 2-bromopropane are related to the stabilities of the carbocations produced as intermediates in the reaction in several ways.

First, it is important to note that tert-butyl bromide has an electron-withdrawing group (carbonyl) attached to its aromatic ring. This makes it more reactive than 2-bromopropane because it is easier for tert-butyl bromide to achieve a favorable resonance structure.

Second, it is also important to note that tert-butyl bromide has a more stable carbocation intermediate than 2-bromopropane because it has a larger number of bonds between carbon atoms. This means that these bonds take longer to break apart during the transition state, which makes it harder for tert-butyl bromide's intermediate to form.

To learn more about carbocations visit: https://brainly.com/question/9223628

#SPJ4

The molarity of the acid is given, so the number of moles titrated can be calculated: 0.050 L × 6 mol/L = 0.3 moles of strong acid added thus ...

A strong acid-strong base titration is used to determine the concentration of an acidic solution by titrating it with a known concentration of a basic solution, or vice versa, until neutralisation occurs. Because both the acid and base are strong (high Ka and Kb values), they will fully dissociate, which means that all the molecules of acid or base will separate into ions. Equivalent amounts of H+ and OH- ions combine to form H2O at the equivalence point, resulting in a pH of 7.0. (neutral).

In aqueous solution, an acid that has been completely ionised. In contrast to a weak acid, when a strong acid is placed in a solution such as water, all of the strong acid dissociates into its ions. The general equation for strong acid dissociation is:

HA(aq)→H+(aq)+A−(aq)

The H stands for hydrogen, and the A stands for the acid's conjugate base (anion).

A base that is completely ionized in aqueous solution. This means when the strong base is placed in a solution such as water, all of the strong base will dissociate into its ions. The general equation of the dissociation of a strong base is:

XOH(aq)→X+(aq)+OH−(aq)

The OH represents hydroxide and the X represents the conjugate acid (cation) of the base.

To learn more about titration equation refer to:https://brainly.com/question/19556786

#SPJ4

Viscosity of polystyrene is determined to know the size of polystyrene its compression, and molding capacity.

To obtain the perfect shape and size the configuration of polystyrene should be maintained under different conditions.

So, to deduce the confirmation of the polystyrene under viscosity determination  we can apply 2 methods;

1. By adding excess diluents to the polystyrene which reduces its viscosity.

2. By introducing or adding small linear chains by addition method to the molecular chains of polystyrene molecular structure to reduce chain entanglement.

Learn more about polystyrene here;

https://brainly.com/question/27017570

#SPJ4

Answer:

92

Explanation:

P=183.65 atm is the pressure inside the tank for the given conditions.

How is the pressure calculated?

Given,

V=108 L

m=22700 gm

The formula is PV=nRT

moles= [tex]\frac{Mass}{Molar mass}[/tex]

∴moles of [tex]N_{2}[/tex] = [tex]\frac{22700}{28}[/tex]=810.78 moles.

R=0.082 [tex]\frac{L atm}{molK}[/tex]

T=27°C=300K

P=[tex]\frac{nRT}{V}[/tex]

[tex]P_{N_{2}[/tex]=[tex]\frac{810.71 X 0.0821 X 298}{108}[/tex]

P=183.65 atm

The ideal gas law (PV = nRT) connects the macroscopic characteristics of ideal gases. A gas is considered to be perfect if its particles (a) do not interact with one another and (b) occupy no space (have no volume).

PV = nRT

PV = nRT is the equation for an ideal gas. In this equation, P stands for the ideal gas's pressure, V for the ideal gas' volume, n for the total amount of the ideal gas expressed in moles, R for the universal gas constant, and T for temperature.

To know more about ideal gas equation, click here

https://brainly.com/question/27870704

#SPJ1

Answer:

All answers are in the above periodic table

The percent yield would be 40% if 2.50g of the organic fuel was reacted with 2.50g of oxygen and 1.00g of water was produced.

How is the percent yield of an organic molecule determined?

To learn more about percent yield, follow the link https://brainly.com/question/12704041

#SPJ4

Acid and Bases interact in water as they form Hydronium ion and hydroxide ions. The interaction for strong acids and weak acids produces salts.

Acid are those which have ability to dissociates into H⁺ ions.  ans the bases are those which have ability to produce OH⁻ ions. when we mix acid with water it produce hydronium ions.

HCl   +   H₂O ----->   H₃O⁺   +   Cl⁻

when we mix base with water it produced hydroxide ions.

NaOH   +   H₂O    ------>   Na⁺     +   OH⁻

The mixture of two acids of different will react together. while when two acids mix the reaction do not happen. when we mix weak acid with the strong acid it produces salt because  weak acid have higher pH which is basic.

Thus, Acid and Bases interact in water as they form Hydronium ion and hydroxide ions. The interaction for strong acids and weak acids produces salts.

To learn more about acid and base here

https://brainly.com/question/23687757

#SPJ1

Step 1: Begin with a balanced chemical equation and starting amounts for each reactant.

Step 2: Convert mass of each starting reactants to moles.

Step 3: Calculate the number of moles used for each reactant. is the limiting reagent.

what is limiting reaction?

to know more about limiting reaction follow

https://brainly.com/question/28320939

#SPJ4

102 nm wavelength of light is emitted when the electron in a hydrogen atom relaxes from n= 3 to n= 1

∆E = - Rh × ( 1/nf² - 1/ni² )

∆E = difference in energy between final and initial energy level (J )

R = Rydberg's constant

nf = final energy level

ni = initial energy level

nf = 3, ni = 1, Rh = 2.18 × 10-¹⁸

∆E = -2.18 × 10-¹⁸ ( 1/3² - 1/1² )

= 2.18 × 0.88 × 10-¹⁸ J

∆E = 1.93 × 10-¹⁸ J

∆E = hf = hc / λ

λ = (h × c) / ∆E

= ( 6.625 × 10-³⁴ × 3 × 10⁸) / 1.93 × 10-¹⁸

= 19.878 × 10-²⁶ / 1.93 × 10-¹⁸

= 10.299× 10-⁸

= 102.99×10-⁹

= 102 nm

Learn more about Rydberg's constant at https://brainly.com/question/23737904

#SPJ4

When a system is compressed from 50 liters to 5 liters at a constant pressure of 10 atmospheres, how much work is done must be determined. Therefore, worked on is equal to p delta v less. P stands for pressure and refers to atmosphere. Therefore, we must convert it to newtons per square meter.

The equivalent of 10 atmosphere is 10 times 10 1, 3, and 5. The final volume and its beginning volume are the Newton perimeter square and changing volume. The total number of letters is five.

Additionally, we must afterwards convert into meter cube. Now, one letter equals ten to the power three minus m cube. In order to get 15 times 10 to the power of 3 meter cube, we increase it by 10 to the monastery's -50 L.

volume-temperature (constant pressure) When pressure is constant, a gas's volume and temperature are directly inversely related. When pressure is constant, the volume to temperature ratio remains constant. The term "Charles' law" or "Gay-law" Lussac's refers to this relationship.

When we say that the gases are under constant pressure, we mean that the pressures do not change depending on where we are in the cylinder. Both gases fill the entire space and, as you mentioned, exert different pressures. The partial pressure of a gas is the pressure it exerts within a mixture.

To know more about Constant pressure please click here ; https://brainly.com/question/2139620

#SPJ4

Subtract the initial mass from final mass, i.e., vm.

The ocean's salinity is raised by both sea ice production and ocean water evaporation. Ongoing inflow of fresh water from the rivers, fall of rain and snow, and the melting of ice constantly balance.

It makes a significant contribution to conductance and influences many elements of the biochemistry in groundwaters as well as the biological activities that take place there. Temperature, pressure, and salinity all influence the physical properties of water, including its density its heat capacity.

Seawater salinity is impacted by rains, ice development, melting, and drainage. Seawater evaporate, leaving behind salts, which enhances their concentration and raises the salt of the water.

To know more about Salinity of water visit:

https://brainly.com/question/9795840

#SPJ4

It was discovered that the photosynthetic pigment in spinach best absorbed light between the wavelengths of 400 and 450 nm as well as at 650 nm. Additionally, it was discovered that this green phototroph barely absorbed light at wavelengths about 550 nm.

The logarithm of the ratio of incident to transmitted radiant power through a sample is known as absorbance. As an alternative, absorbance can be defined as "the negative logarithm of one minus absorptance, as measured on a homogeneous sample," for samples that scatter light.

The disks will rise as a result of bubbles developing on their surface when the leaves create oxygen. The leaves eventually sink if the cup's light source is taken away.

To know more about Absorbance please click here : https://brainly.com/question/14919298

#SPJ4

The best description of the relationship between emerging scientific ideas and open-mindedness is: Open-mindedness often leads to emerging scientific ideas.

The correct answer choice is option b

It follows that scientific skills emanate faster when a scientist is very open-minded and open to corrections as well. The simple reason why our open-mindedness often results in emerging scientific ideas is simply because it is one of the major keys to investigating scientific problems.

In conclusion, it can be deduced when when we work with transparency, our scientific skills brings positive results.

Read more on open-mindedness:

https://brainly.com/question/10829086

#SPJ1

If the bromobenzene is added too quickly, biphenyl is formed as the side product with the Grignard reagent.

What is Grignard reagent?

Grignard reagent is an organomagnesium halide which has the formula RMgX where R is alkyl or aryl group, Mg is magnesium, X is an halide.

When bromobenzene is added too quickly to the Grignard reagent, biphenyl is formed as a by-product. the formation of the side product is enhanced by high temperature. So, this reaction is carried out in low temperature.

Therefore, biphenyl is formed as side product when bromobenzene is added quickly to the Grignard reagent. The structure of biphenyl is two benzene rings joined together.

To learn more about the Grignard reagents click on the given link https://brainly.com/question/23971610

#SPJ4

When writing the chemical equation for a reaction, a reactant in aqueous solution is indicated with (aq); formation of a solid is indicated with (s).

Chemical equations serve to represent the transformation of reactants into products. For instance, the combination of iron (Fe) and sulphur (S) results in iron sulphide (FeS). The plus symbol indicates that sulphur and iron react to form FeS.

The four primary categories of chemical reactions are single displacement, double displacement, breakdown, and synthesis. But keep in mind that other people refer to these reactions by other names.

They are equations that represent chemical reactions using chemical formulae and symbols. In a chemical equation, the reactants are represented on the left and the products are on the right. A symbol that denotes the reaction's direction separates these two entities.

Learn more about chemical equation:

https://brainly.com/question/26694427

#SPJ4