This illustration is an example of a

Answer:

true i think

Explanation:

Answer:

Combustion

Explanation:

Happy Halloween!

Answer:

D. A neap tide is the period halfway between tides when the tide changes direction. (correction) Answer : C

Explanation:

Process of elimination can be used. First off, A is incorrect because neap tides have the smallest tidal range ; spring tides would fit this choice. B is incorrect since neap tides are specific to the first, and third quarter moons when the sun and moon are right angles. C is wrong because it is the other way around since high tides are a little higher than average and low tides are a little lower than average (correction) this is correct since higher low tides and lower high tides are closer together and have a smaller tidal range than standard tides(spring tides) with higher high tides, and lower low tides. D is correct because they occur halfway between the spring tides (correction): incorrect since a neap tides occur around a week(7 days) after a spring tide(moderate tides). There is no evidence this is true.

There are three patterns: diurnal(one high and low tides a day), semidiurnal(two high and low tides a day), and mixed(two high and low tides a day of different lengths).

The spring and neap tides are the types of tides involved with the low and high tides.

Answer: Yes.

Explanation:

the number of protons in the nucleus determines an element's identity. Chemical changes do not affect the nucleus, so chemical changes cannot change one type of atom into another. The number of protons in a nucleus does change sometimes, however. The identity of the atom, therefore, changes.

Answer:

the answer is water.Hope this helps

Answer:

1. Both metals and nonmetals are types of elements and can be involved in chemical reactions. Some of their differences are highlighted in the chart below.

  Metals:    

Appearance; Shiny.    

Conduct heat or electricity; Yes.  

Malleable or ductile; Yes, both and has great mechanical strength.    

Form stable compounds; Forms stable compounds with acids; also forms oxides; replaces hydrogen in acids or water; combine with nonmetals; often becomes positive.

  Nonmetals :  

Appearance; Not shiny .  

Conduct heat or electricity; Not well .  

Malleable or ductile; Brittle and not easily molded into shapes .  

Form stable compounds; Oxides usually give acid reactions in water; often becomes negative

2. The electrochemical series is an arrangement of metals in such order that any metal in the list is displaced from its compounds by any metal above it, but displaces any metal below it. The higher up the list a metal is, the greater its activity. Knowing a metal’s placement on this chart can help you understand the activity of the metal, especially in regard to its ability to displace hydrogen in acids. Any items on the list far above hydrogen will do a good job at displacing it, those near it won’t do such a good job, and those below it won’t displace it from acids at all.

3. When placed in water, acids dissociate and form free hydrogen ions, which determine the properties of acids. The number of hydrogen ions determines the strength of an acid. Strong acids dissociate to a large degree and produce a large number of hydrogen ions. Weak acids dissociate to only a slight degree.

When placed in water, bases dissociate and form free hydroxyl ions, which determine the properties of bases. Strong bases dissociate to a great degree and produce a large number of hydroxyl ions. Weak bases dissociate to only a slight degree.

When free hydrogen ions and free hydroxyl ions are removed from solutions of acids and bases, then the acidic and basic properties disappear. This is what happens when acids and bases are mixed together in proper proportion; the hydroxyl ion will unite with the hydrogen ion to form water. The resulting salt product is neutral.

4. Indicators are used to help determine the pH value of an unknown solution. These are often papers that turn a certain color at certain pH values.

Metals are good conductors of heat and electricity but the non-metals are not.

Metals are good conductors of electricity and heat whereas non-metals are poor conductors of heat and electricity. Metals have high density while on the other hand, non-metals have low density. Metals are malleable and ductile whereas non-metals are brittle.

So we can conclude that metals are good conductors of heat and electricity but the non-metals are not.

Learn more about metals here: https://brainly.com/question/4701542

#SPJ2

Answer:

Love it because Love it

Explanation:

Answer:

V = 34.55 L

Explanation:

Given that,

No of moles, n = 1.4

Temperature, T = 20°C = 20 + 273 = 293 K

Pressure, P = 0.974 atm

We need to find the volume of the gas. It can be calculated using Ideal gas equation which is :

PV=nRT

R is gas constant, [tex]R=0.08206\ L-atm/mol-K[/tex]

Finding for V,

[tex]V=\dfrac{nRT}{P}\\\\V=\dfrac{1.4\times 0.08206\times 293}{0.974 }\\\\V=34.55\ L[/tex]

So, the volume of the gas is 34.55 L.

The density of the wood : 1.45 g/cm³

Density is a quantity derived from the mass and volume  

Density is the ratio of mass per unit volume  

With the same mass, the volume of objects that have a high density will be smaller than objects with a smaller type of density  

The unit of density can be expressed in g/cm³ or kg/m³  

Density formula:  

[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]

ρ = density  

m = mass  

v = volume  

[tex]\tt V=2.7\times 5.5\times 3.9=57.915~cm^3[/tex]

[tex]\tt \rho=\dfrac{m}{V}\\\\\rho=\dfrac{84~g}{57.915~cm^3}=\boxed{\bold{1.45`g/cm^3}}[/tex]

Answer:

Salt

Explanation:

It has all -

Answer:

tundra bc it has barley any food source and has vary little inhabitants

Explanation:

Answer:

a patch of lichens on bare rock

Answer:

it's the first one

Explanation:

can you help me too

Answer:

Explanation:

when the angle between the force and  displacement is 0

Answer:

The block is made up of aluminum.

density = 2.7 g/cm³

Explanation:

Given data:

Dimension of metal block = 2.0 cm×2.5 cm× 3.0 cm

Mass of block = 40.05 g

Density of block = ?

Which metal is this = ?

Solution:

Density:

Density is equal to the mass of substance divided by its volume.

The symbol used for density is called rho. It is represented by ρ. However letter D can also be used to represent the density.

Units:

SI unit of density is Kg/m3.

Other units are given below,

g/cm3, g/mL , kg/L

Formula:

D=m/v

D= density

m=mass

V=volume

Volume of block = 2.0 cm×2.5 cm× 3.0 cm = 15 cm³

d = m/v

d = 40.5 g/ 15 cm³

d = 2.7 g/cm³

The block is made up of aluminum.

Answer:

See explanation

Explanation:

The question is incomplete because the image of the alcohol is missing. However, I will try give you a general picture of the reaction known as hydroboration of alkenes.

This reaction occurs in two steps. In the first step, -BH2 and H add to the same face of the double bond (syn addition).

In the second step, alkaline hydrogen peroxide is added and the alcohol is formed.

Note that the BH2 and H adds to the two atoms of the double bond. The final product of the reaction appears as if water was added to the original alkene following an anti-Markovnikov mechanism.

Steric hindrance is known to play a major role in this reaction as good yield of the anti-Markovnikov like product is obtained with alkenes having one of the carbon atoms of the double bond significantly hindered.

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question

mass = 30.5 g

volume = 2.2 cm³

We have

[tex]density = \frac{30.5}{2.2} \\ = 13.863...[/tex]

We have the final answer as

Hope this helps you

Answer:

1.1 x [tex]10^{9}[/tex] km/h

Explanation:

Here we need to do two conversions- one from centimetres to kilometres and one from seconds to hours.

To get from cm to km- we divide by 100 000 since there are 100 000 cm in a km.

To get from seconds to hours we divide by 3600 since there are 3600 seconds in an hour

[tex]\frac{3*10^{10}cm/100000 }{1second/3600} =1.1*10^{9} km/h[/tex]

Answer:

attached below is the detailed solution

answer : value of constant = 2.18 * 10^-18 J

Explanation:

Express the constant in terms of h and c and RH

attached below is the detailed solution

Constant = [tex]h_{C} R_{H}[/tex]

               = ( 6.626 * 10^-34 ) * ( 3 * 10^8 ) * ( 1.097 * 10^7 )

               = 2.18 * 10^-18 J

The Planck equation and the light speed  allow us to find the results for the transformation of the Rydberg equation are:

   [tex]E = A ( \frac{1}{n_1^2}\frac{x}{y} - \frac{1}{n_2^2} )\\A= R_H \ h \ c \\A = 2.18 \ 10^{-18} j[/tex]

The Rydberg equation is an empirical expression that explains the wavelength of the emissions.

          [tex]\frac{1}{\lambda } = R_H ( \frac{1}{n_1^2} - \frac{1}{n_2^2} )[/tex]  

Where λ is the wavelength of the emitted radiation, is the Rydberg constant, n₁ and n₂ are integers with n₁ <n₂

It is asked to write the Rydberg equation  for the energy.

Let's use the Planck relation.

           E = h f

The light speed is related to the wavelength and frequency of radiation.

           c = λ f

Where E is the energy, h the Planck constant, c the speed of light, λ the wavelength and f the frequency.

Let's  substitute.

           E = [tex]\frac{hc}{\lambda}[/tex]  

           [tex]\frac{1}{\lambda} = \frac{E}{hc}[/tex]  

Let's substitute in the Rydberg equation.

          [tex]\frac{E}{hc} = R_H ( \frac{1}{n_1^2} - \frac{1}{n_2^2}) \\E = R_H \ h \ c \ ( \frac{1}{n_1^2} - \frac{1}{n_2^2} )[/tex]

We can write is an constant of the form.

          A = [tex]R_H h c[/tex]

The value of the constant is :          

          A = 1,097 10⁷ 6,626 10⁻³⁴ 3 10⁸

          A = 2.18 10⁻¹⁸ J

In conclusion, using the Planck equation and the light speed we can find the results for the transformation of the Rydberg equation are

        [tex]E = A ( \frac{1}{n_1^2} - \frac{1}{n_2^2} )\\ A = R_H h c\\[/tex]

       A = 2.18 10⁻¹⁸ J

Learn more here:  brainly.com/question/14691724

Answer:

Orange

Explanation:

I used google my b

Answer:

ORANGE

explanation:

Small pieces of sodium burn in air with often little more than an orange glow. Using larger amounts of sodium or burning it in oxygen gives a strong orange flame.

Answer:

Explanation:

I'm not sure what you mean by the units. The answer using kg and ms is 23000 * 50 = 1150000 kg m/s

Answer:

B

Explanation:

Just did it on usa test prep

The element which is most likely to be magnesium  is the element with the electronic configuration same as magnesium.

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.

Learn more about element,here:

https://brainly.com/question/14347616

#SPJ6

Answer:

record

Explanation:

Alkanes are saturated hydrocarbons that have single bonds in chains

General formula for alkanes :

[tex]\tt \large{\bold{C_nH_{2n+2}}[/tex]

Hydrocarbon combustion reactions (specifically alkanes)

[tex]\large {\box {\bold{C_nH _ (_2_n _ + _ 2_) + \dfrac {3n + 1} {2} O_2 \Rightarrow nCO_2 + (n + 1) H_2O}}}[/tex]

So that the burning of ethane with air (oxygen):

[tex]\tt C_2H_6+\dfrac{7}{2}O_2\rightarrow 2CO_2+3H_2O[/tex]

2C₂H₆ (g) + 7O₂ (g) ⟶ 4CO₂ (g) + 6H₂O (ℓ)

or we can use mathematical equations to solve equilibrium chemical equations by giving the coefficients for each compound involved in the reaction

C₂H₆ (g) + aO₂ (g) ⟶ bCO₂ (g) + cH₂O (ℓ)

C : left 2, right b ⇒ b=2

H: left 6, right 2c⇒ 2c=6⇒ c= 3

O : left 2a, right 2b+c⇒ 2a=2b+c⇒2a=2.2+3⇒2a=7⇒a=7/2

Answer:

Proust's law of definite proportion

Explanation:

The law of constant proportion states that the components elements of a given chemical compound combine with each other in a fixed mass ratio when the compound is produced by any given process

Therefore, from the question, the chemical formula for Nitrogen Dioxide is NO₂, where the molar mass of nitrogen, N = 14

The molar mass of oxygen, O = 16

Given that one molecule of NO₂, contains one atom of nitrogen and two atoms of oxygen, one mole of NO₂ will contain 14 grams of nitrogen and 32 grams of oxygen, according to Proust's law of definite proportion.

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

So we have

[tex]density = \frac{25}{90} = \frac{5}{18} \\ = 0.277777...[/tex]

We have the final answer as

Hope this helps you

Answer:

There are three main types of rocks: sedimentary, igneous, and metamorphic. Each of these rocks are formed by physical changes—such as melting, cooling, eroding, compacting, or deforming—that are part of the rock cycle. Sedimentary Rocks Sedimentary rocks are formed from pieces of other existing rock or organic material. There are three different types of sedimentary rocks: clastic, organic (biological), and chemical. Clastic sedimentary rocks, like sandstone, form from clasts, or pieces of other rock. Organic sedimentary rocks, like coal, form from hard, biological materials like plants, shells, and bones that are compressed into rock. The formation of clastic and organic rocks begins with the weathering, or breaking down, of the exposed rock into small fragments. Through the process of erosion, these fragments are removed from their source and transported by wind, water, ice, or biological activity to a new location. Once the sediment settles somewhere, and enough of it collects, the lowest layers become compacted so tightly that they form solid rock. Chemical sedimentary rocks, like limestone, halite, and flint, form from chemical precipitation. A chemical precipitate is a chemical compound—for instance, calcium carbonate, salt, and silica—that forms when the solution it is dissolved in, usually water, evaporates and leaves the compound behind. This occurs as water travels through Earth’s crust, weathering the rock and dissolving some of its minerals, transporting it elsewhere. These dissolved minerals are precipitated when the water evaporates. Metamorphic Rocks Metamorphic rocks are rocks that have been changed from their original form by immense heat or pressure. Metamorphic rocks have two classes: foliated and nonfoliated. When a rock with flat or elongated minerals is put under immense pressure, the minerals line up in layers, creating foliation. Foliation is the aligning of elongated or platy minerals, like hornblende or mica, perpendicular to the direction of pressure that is applied. An example of this transformation can be seen with granite, an igneous rock. Granite contains long and platy minerals that are not initially aligned, but when enough pressure is added, those minerals shift to all point in the same direction while getting squeezed into flat sheets. When granite undergoes this process, like at a tectonic plate boundary, it turns into gneiss (pronounced “nice”). Nonfoliated rocks are formed the same way, but they do not contain the minerals that tend to line up under pressure and thus do not have the layered appearance of foliated rocks. Sedimentary rocks like bituminous coal, limestone, and sandstone, given enough heat and pressure, can turn into nonfoliated metamorphic rocks like anthracite coal, marble, and quartzite. Nonfoliated rocks can also form by metamorphism, which happens when magma comes in contact with the surrounding rock. Igneous Rocks Igneous rocks (derived from the Latin word for fire) are formed when molten hot material cools and solidifies. Igneous rocks can also be made a couple of different ways. When they are formed inside of the earth, they are called intrusive, or plutonic, igneous rocks. If they are formed outside or on top of Earth’s crust, they are called extrusive, or volcanic, igneous rocks. Granite and diorite are examples of common intrusive rocks. They have a coarse texture with large mineral grains, indicating that they spent thousands or millions of years cooling down inside the earth, a time course that allowed large mineral crystals to grow.

Alternatively, rocks like basalt and obsidian have very small grains and a relatively fine texture. This happens because when magma erupts into lava, it cools more quickly than it would if it stayed inside the earth, giving crystals less time to form. Obsidian cools into volcanic glass so quickly when ejected that the grains are impossible to see with the naked eye. Extrusive igneous rocks can also have a vesicular, or “holey” texture. This happens when the ejected magma still has gases inside of it so when it cools, the gas bubbles are trapped and end up giving the rock a bubbly texture. An example of this would be pumice.

Explanation:

oh and also nice profile pic :P