twelve grams of sodium chloride wwere dissolved in 52 ml (52g) of distilled water, calculate the % sodium chloride in the solution

Metals typically lose electrons to complete their octet in a reaction with non-metals, whereas non-metals typically acquire electrons to complete their octet. Ionic compounds are typically formed via reactions between metals and nonmetals. The given compound barium hydroxide is ionic.

Ions with the opposite charge are carefully packed together to form crystalline solids. Ionic compounds typically result from reactions between metals and non-metals. The electrostatic interaction between the positive and negative ions holds ionic solids together.

Baryta, commonly known as barium hydroxide, has the chemical formula Ba(OH)₂. It is an odorless, clear-white powder. It has a toxic disposition. It is ionic in nature, with two hydroxide ions per molecule of barium hydroxide (Ba(OH)₂ in an aqueous solution an example.

To know more about ionic compound, visit;

https://brainly.com/question/13058663

#SPJ6

Answer:

Explanation:

Let the final volume be v .

from the formula

S₁ V₁ = S₂V₂

4 x 7 = .8 x V₂

V₂ = 35 mL

Final volume of the solution will be 35 mL .

Answer:

a) common ion effect

b) solubility

c) saturated solution

d) solubility product constant

e) molar solubility

Explanation:

When a substance, say BA2 is dissolved in a solution and another substance CA2 is dissolved in the same solution. The solubility of BA2 is decreased due to the addition of CA2. This is known as common ion effect.

The mass of a substance that will dissolve in a given Volume of solvent is known as it's solubility.

The molar solubility is the amount of moles of solvent that dissolves in 1 dm^3 of solvent.

A solution that contains just as much solute as it can normally hold at a given temperature is known as a saturated solution.

Lastly, the product of molar solubilites raised to the power of the molar coefficient is know as the solubility product constant.

The correct matches and their explanation are:

a) A decrease in the solubility of an ionic compound as a result of the addition of a common ion: Option 4. common ion effect

b) The mass of salt in grams that will dissolve in 100 mL of water: Option 1. solubility

c) A solution that has dissolved the maximum amount of a compound at a given temperature. Any further addition of salt will remain undissolved: Option 5. saturated solution

d)  The product of the molarities of the dissolved ions, raised to a power equal to the ion's coefficient in the balanced chemical equation: Option 3. solubility product constant

e) The maximum number of moles of a salt that will dissolve in 1 L of solution: Option 2. molar solubility

To learn more about molar solubility and common ion effect follow the link:

https://brainly.com/question/14782973

Answer:

9000 pounds

Explanation:

9000 pounds

Answer: 9000 lbs.

Explanation: 4.5 tons = 9000 pounds.

Answer:

The cell on the left is animal, The cell on the right is a plant cell.

Explanation:

1: cell membrane

2: chloroplast

3: cell wall

4: vacuole

5: mitochondria

6:nucleus

7: lysosome

8: cytoplasm

Things to remember, only plant cells have cell walls. Plant cells are the only ones that have chloroplast.

Answer:

the answer to this question is c 140

Your radio picks up those radio waves and channels them into electric circuits in your radio that convert them into sounds you can hear.

Answer:

Is like for solving for the solution for both equations??

Answer:

[tex]Cu_2O[/tex]

Explanation:

Hello.

In this case, since the reaction obeys the law of conservation of mass, since the initial oxide had a mass of 0.500 g and yielded 0.444 g of copper, the mass of oxygen in the oxide is:

[tex]m_O=0.500g-0.444g=0.056g[/tex]

In such a way, we next compute the moles of copper and oxygen by using their atomic masses:

[tex]n_{Cu}=0.444g*\frac{1mol}{63.546 g} =0.00699mol\\\\n_O=0.056g*\frac{1mol}{16.00g}=0.0035mol[/tex]

Next, in order to compute the subscripts of Cu and O on the empirical formula we divide the moles by the fewest moles, in this 0.0035 mol as shown below:

[tex]Cu:\frac{0.00699}{0.0035} =2\\\\O:\frac{0.0035}{0.0035} =1[/tex]

It means that the empirical formula turns out:

[tex]Cu_2O[/tex]

Best regards!

Answer:

[tex]Kc=\frac{[SF_6]^8}{[F_2]^2^4}[/tex]

Explanation:

Hello.

In this case, for the undergoing chemical reaction:

[tex]S_8(s) + 24F_2(g) \rightleftharpoons 8SF_6(g)[/tex]

We consider the law of mass action in order to write the equilibrium expression yet we do not include S8 as it is solid and make sure we power each gaseous species to its corresponding stoichiometric coeffient (24 for F2 and 8 for SF6), thus we obtain:

[tex]Kc=\frac{[SF_6]^8}{[F_2]^2^4}[/tex]

Best regards!

Answer:

6.7

⋅

10

23

atoms of H

Explanation:

Answer:

you can see the empirical formula at the pic

The empirical formula for compound (a) is NiI2, (b) is BaBr2 and (c) is BeS.

Empirical formula of a compound is defined as the simplest whole number ratio of atoms present in a compound.

(a) 1.245 g Ni : 5.381 g I

Mole of Ni ; Mole of I = 1.245/59 : 5.381/127 = 0.02 : 0.04 = 1:2

So the formula is NiI2

(b) 2.677 g Ba : 3.115 g Br

Mole of Ba : Mole of Br = 2.677/137 : 3.115/60 = 0.019 : 0.038

= 0.02 : 0.04 = 1:2

So the formula is BaBr2

(c) 2.128 g Be : 7.557 g S

Mole of Be : Mole of S = 2.128/9 : 7.557/32 = 0.2 : 0.2 = 1:1

So the formula is BeS

Thus, empirical formula for compound (a) is NiI2, (b) is BaBr2 and (c) is BeS.

To learn more about empirical formula, refer to the link below:

https://brainly.com/question/11588623

#SPJ2

Answer:

A=element

B=compond

C=solution

And we can see that the potassium ion, K+, has the same electronic configuration as the chloride ion, Cl-, and the same electronic configuration as an atom of argon, Ar. Therefore, Ar, Cl-, and K+ are said to be isoelectronic species.

Answer:

during sublimation

Explanation:

just took the test

Answer:

b

Explanation:

Answer:

Gravity attracts the moon Earth, and Inertia keeps the moon in motion.

Explanation:

Answer:

Yes, but it must be kept at that value and do not let it to decrease more.

Explanation:

Hello.

In this case, in order to substantiate whether the cabin meet the federal standards, we need to convert the 500 mmHg to atm and compare the result with 0.72 atm by knowing that 1 atm equals 760 mmHg:

[tex]500mmHg*\frac{1atm}{760mmHg} \\\\=0.66atm[/tex]

Thus, since 0.66 atm is 0.06 atm away from the federal standard we can infer that it may meet the federal standard, however, it would not be recommended to let the pressure decrease more than that.

Yes, the cabin pressurized at 500 mm hg meets federal standards.

1 atm is approximately equal to 760 mm Hg. Therefore, the pressure is:

500 mm Hg / 760 mm Hg/atm ≈ 0.65789 atm

So, the cabin pressure of 500 mm Hg is approximately 0.65789 atmospheres. If the atmospheric pressure at an elevation of 8000 feet averages about 0.72 atmospheres, then the cabin pressure of 0.65789 atmospheres would be lower than the ambient atmospheric pressure.

To meet federal standards, cabin pressure should be maintained at an equivalent pressure that allows occupants to breathe comfortably.

Learn more about pressure, here:

https://brainly.com/question/15189000

#SPJ6

Answer:

10.)Weight and mass are different because only weight describes the force of gravity on an object.

11.)On a planet with more mass than earth your weight would be higher because greater gravitational pull.

On a planet with less mass than earth your weight would be less because of the lower gravitational pull.

Explanation:

Answer: here u go

Explanation:

A. 3.7 x 10^4

B. 4.56 × 10^-8

C. 8.01 × 10^6

Work for A:

Step 1

To find a, take the number and move a decimal place to the right one position.

Original Number: 37,000

New Number: 3.7000

Step 2

Now, to find b, count how many places to the right of the decimal.

New Number: 3 . 7 0 0 0

Decimal Count:   1 2 3 4

There are 4 places to the right of the decimal place.

Step 3

Building upon what we know above, we can now reconstruct the number into scientific notation.

Remember, the notation is: a x 10b

a = 3.7 (Please notice any zeroes on the end have been removed)

b = 4

Now the whole thing:

3.7 x 104

Step 4

Check your work:

104 = 10,000 x 3.7 = 37,000

Work for B:

Step 1

To find a, take the number and move a decimal place to the right one position.

Original Number: 456

New Number: 0.0000000456

Step 2

Now, to find b, count how many places to the right of the decimal.

New Number: 0 . 0 0 0 0 0 0 0 4 5 6

Decimal Count:   1 2 3 4 5 6 7 8 9 10

There are 2 places to the right of the decimal place.

Step 3

Building upon what we know above, we can now reconstruct the number into scientific notation.

Remember, the notation is: a x 10b

a = 4.56

b = 2

Now the whole thing:

4.56 x 102

Step 4

Check your work:

102 = 100 x 4.56 = 456

Work for C:

Step 1

To find a, take the number and move a decimal place to the right one position.

Original Number: 8,010,000

New Number: 8.010000

Step 2

Now, to find b, count how many places to the right of the decimal.

New Number: 8 . 0 1 0 0 0 0

Decimal Count:   1 2 3 4 5 6

There are 6 places to the right of the decimal place.

Step 3

Building upon what we know above, we can now reconstruct the number into scientific notation.

Remember, the notation is: a x 10b

a = 8.01 (Please notice any zeroes on the end have been removed)

b = 6

Now the whole thing:

8.01 x 106

Step 4

Check your work:

106 = 1,000,000 x 8.01 = 8,010,000

Hope this helps!

Answer:

Both ionic bonds and covalent bonds (coordinate and non-coordinate) are present in crystalline [tex]\rm CuSO_4\cdot 5\, H_2O[/tex].

Explanation:

[tex]\rm CuSO_4\cdot 5\, H_2O[/tex] can be formed by adding water to the anhydrous salt [tex]\rm CuSO_4[/tex].

[tex]\rm CuSO_4[/tex] itself is an ionic compound consisting of [tex]\rm Cu^{2+}[/tex] ions and [tex]\rm {SO_4}^{2-}[/tex] ions. Ionic bonds are present between these ions. However, within each sulfate [tex]\rm {SO_4}^{2-}[/tex] ion, covalent bonds connect the central sulfur atom to each of the oxygen atoms.

Water molecules [tex]\rm H_2O[/tex] are highly polar. Partial negative charges surround the oxygen atom in each water molecule.

When water is added to anhydrous [tex]\rm CuSO_4[/tex], the negatively-charged portion of these [tex]\rm H_2O\![/tex] molecules would be attracted to the positively-charged [tex]\rm Cu^{2+}[/tex] ions in [tex]\rm CuSO_4\![/tex].

Lone pairs on oxygen atoms in [tex]\rm H_2O\!\![/tex] would form coordinate covalent bonds with [tex]\rm Cu^{2+}\![/tex] ions. (These bonds are considered "coordinate" because both electrons in each of these bonds come from the oxygen atom, not the [tex]\rm Cu^{2+}[/tex] ion.) That would produce coordination complexes with one [tex]\rm Cu^{2+}\!\![/tex] ion and five [tex]\rm H_2O\!\!\![/tex] "ligands" each.

Because the [tex]\rm H_2O[/tex] ligands carry no electric charge, each of these complexes would also carry a charge of [tex](+2)[/tex] (same as the charge on one [tex]\rm Cu^{2+}\!\![/tex] ion.) Ionic bonds would be present between the positively-charged coordination complexes and the negatively-charged [tex]\rm {SO_4}^{2-}[/tex] ions.

Summary:

Finally, someone gave a clear photo.

Answer:

Be

Explanation:

The atomic radius decreases as you go from left to right in a period. Be has the largest radius out of those given elements.

Answer:

Bromine can become an ion when it gains an electron. Br- is a negative ion. Its known as an anion. Bromine has 35 protons=35 electrons. one added electron gives it 36 electrons  and it becomes an anion.

Explanation:

Bromine can have isotopes having 44 and 46 neutrons.

Answer:

look at the explanation

Explanation:

The air that you breathe is a homogeneous mixture of oxygen, nitrogen, argon, and carbon dioxide, along with other elements in smaller amounts. Because each layer of the Earth's atmosphere has a different density, each layer of air is its own homogeneous mixture.

Hope this helps. :)

Answer:

10

Explanation:

Answer:

A graph can be very handy in collecting data and storing it in one place. A graph can be a very effective tool in presenting visual information rather swiftly. Hope this helps! I am learning about graphs in my course!

Explanation:

Answer:

graph) a diagram showing the relation between variable quantities, typically of two variables, each measured along one of a pair of axes at right angles.

Explanation:

Graphing is used daily. From stockbrokers to performance evaluation in companies. All use them to boost sales and meet deadlines. Even simple calculations can be assessed better by using a graph.

(let me know if this helps?)